Band Reamer Machine Operator Job Description Sample
Band Saw Operator
JOB REQUIREMENTS: Adjust machine controls to alter position, alignment, speed, or pressure.
Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools. Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans. Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices such as rulers, micrometers, or scales.
Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels. Maintain production records, such as quantities, types, and dimensions of materials produced. Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment. Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks. Operate cranes, or signal crane operators to position or remove stone from cars or saw beds.
Remove defective or substandard materials from machines, and readjust machine components so that products meet standards. Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines. Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
Start machines to verify setups, and make any necessary adjustments. Start pumps to circulate water and abrasives onto blades or cables during cutting.OTHER EXPERIENCE AND QUALIFICATIONS: Previous saw experience required.
Use of micrometers and calipers for checking materials and cut parts.APPLICATION INSTRUCTIONS: E-Mail a Rsum:
Blind Blt/Nas1900 Band Ann Operator
Blind Blt/NAS1900 Band Ann Operator
Company: Allfast Fastening Systems Inc.
Primary Location: 15200 Don Julian Road, City of Industry, CA 91745 USA
Employment Type: Hourly | Full-Time
Function: Manufacturing Production / Distribution
Equal Opportunity Employer Minorities/Women/Veterans/Disabled
Main Duties & Responsibilities
Set up and operate band anneal
equipment for induction annealing blind fastener sleeves.
Essential Duties, Responsibilities and Competencies:
Reads and interprets documents (blue prints, drawing, or manufacturing work orders), to ascertain what tools and materials are necessary for induction annealing blind fastener sleeves.
Sets up and operates, on production basis, all assigned band anneal equipment. This includes settings
and adjustments required to produce parts to specifications. Selects, installs and adjusts tooling in proper order and relationship. Makes all adjustments necessary to produce parts of acceptable quality.
Performs installation testing to evaluate machine settings using assembled parts, test buttons and installation tooling. Performs installed shear and tension testing using text fixtures and speedy testers. Performs dimensional inspection using measuring devices, such as, comparators, micrometers, calipers
and digital indicators.
Monitors production run to ensure conformance to specifications.
Reworks and directs reworking of tooling as needed.
Meets and maintains all productivity levels and quality requirements to support departmental goals and
schedules. Performs minor preventative maintenance on assigned machines.
Performs record keeping, data entry, housekeeping, and follows safety regulations.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and
Education and/or Experience:
High school diploma or general
education degree (GED). A minimum of four (4) years experience in operating
various screw machines; or equivalent combination of education and experience.
While performing the duties of this job, the employee is regularly required to stand; use hands to finger,
handle, or feel; and talk or hear. The employee is occasionally required to walk; reach with hands and arms and stoop, kneel or crouch.
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close
vision, color vision, depth perception and ability to adjust focus.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually very loud.
Ability to add, subtract,multiply, and divide in all units of measure, using whole numbers, common
fractions, and decimals.
Ability to read and understand blueprints.
City:City of Industry
Location_formattedLocationLong:City of Industry, California US
Community / Marketing Title:Blind Blt/NAS1900 Band Ann Operator
EEO Employer Verbiage:
Machine Operator III - Fin Machine Operator
Ensuring Chart's Success…
Chart's manufacturing group is critical to building our products on time and of the highest quality to our customers. The Machine Operator III will work towards our production goals along with peers through the direction of lead man, shift supervisor, and plant manager.
What Your Day-to-Day Activities Will Be…
Candidates will have be running McElroy and Happy fin tube machines
Reads, interprets drawings and written instruction applicable to specific machining process.
Performs set-up and operation as required without supervision.
Performs all required measurements.
Capable of required tool selection for required task.
Trains, or assists in training new employees.
Can safely operate overhead or jib type cranes and rigging.
Performs all non-electrical preventative maintenance as indicated by supervision for specific machinery.
Adhere to all safety guidelines and policies.
Other duties as assigned.
Your Professional Experience Should Be…
- The ability to reading a tape measure as well as blue prints.
Your Education Should Be…
- High School Diploma or Equivalent Work Experience
Your Physical Work Environment Will Require…
While performing the duties of this job, the employee is regularly required to:
Standing for prolonged periods of time.
Occasional repetitive lifting up to 60 lbs as regular daily activities necessitate.
Handle or feel objects.
Tools or controls and talk or hear.
The employee is occasionally required to walk, stoop, kneel, crouch or crawl.
Chart Industries is an equal opportunity employer.
Mailing Machine Operator Trainee
Are you looking for a career with a great company? We are looking for a Mailing Machine Operator Trainee to join our award winning team. The ideal candidate has a continuous improvement mindset and an interest in learning to operate inkjets and inserters. Suttle-Straus, is a premier provider of printing, digital imaging, wide format, mailing, custom kitting, warehousing, and distribution services. Our success is founded on three core principles: A clear focus on meeting and exceeding customer expectations; a long history of implementing new technologies to increase quality and efficiency; and the importance of building an outstanding workforce. Winner of the Printing Industries of America's Best Workplace award for 18 consecutive years, Suttle-Straus offers a collaborative work environment, great benefits and fantastic co-workers.
We offer a competitive benefits package with immediate eligibility for health, dental, vision and life insurance, and eligibility after 30 days for a company matched 401(k) plan. Generous paid time off accrues monthly from date of hire.
Suttle-Straus is an equal employment opportunity employer.
The primary purpose of this role is to learn to operate a mail inserting machine that mechanically inserts material into an envelope and/or an Ink Jet that images an address on a mail piece destined for the USPS mail stream. The operator sets up each job according to the job specifications and maintains established production standards. The position requires the operator be detail orientated and have a strong mechanical aptitude. This is a third shift position located in Waunakee, Wisconsin.
Duties, Responsibilities & Abilities:
Interpret and follow direction from a PrintStream work ticket
Mechanical aptitude to set up and operate: 6 station Bell & Howell inserter or a similar model from another manufacturer, postage meter and tray banding equipment
Mechanical aptitude to set up and operate: Video Jet Ink Jet equipment or a similar model from another manufacturer and tray banding equipment
Ability to work in a fast paced production environment
Ability to stand for up to 8 hours
Ability to lift up to 10 lbs. repetitively
Ability to occasionally lift up to 30 lbs.
Ability to bend repetitively
Ability to work well with co-workers in a team environment
Ability to operate a computer based insert matching system
Support safety practices including the handling of and disposal of hazardous chemicals
Ability to understand specific customer and quality related job processes and detail requirements
Perform preventative maintenance and routine repairs
Skills & Educational
Prior print shop and/or mail house experience a plus
General knowledge of US postal regulations
High School education or equivalent professional experience
Machine Operator - Sauter Straightener Operator
Perform a variety of duties to set up and operate 1 to 2 NC controlled automatic band saw/strip straighteners (Sauter Straightener) including auxiliary equipment (ink jet printer, rust preventative applicator, plastic strip applicator, etc.). Work from schedules, specifications, coil ID tags, computer control programs, written or verbal instructions. Duties require close visual attention, manual coordination and dexterity in setting up, operating and monitoring operation of equipment, NC controllers and vision systems. Strong mechanical and electrical aptitude is essential. Use a variety of hand tools and precision measuring devices.
Operator must be computer literate and capable of working with Windows based PC systems.
Perform set-ups (mechanical and software based) to accommodate a variety of sizes of incoming materials. Proper setup and adjustment for this operation is critical to minimize the affect of material weight/positioning on straightness/convexity. Monitor and quickly (120 ft/min line speed) make on the fly adjustments to straightening parameters as required. Ability to measure strip characteristics and make mechanical and/or software adjustments to calibrate measuring systems.
Visually inspect for coil set, camber and convexity. Use of Vernier caliper, .0001" resolution micrometer, convexity gages, 18" camber gage and 10' camber table.
Check coils to be straightened and coil tag for previous operation. Load/unload coils using proper lifting techniques (hoist). Thread material through various rollers, guides, support surfaces, counter balances. Monitor operation and input adjustments as necessary.
Perform routine maintenance operations and checks. Maintain equipment and work area in a clean and orderly condition. Detect and report any material defects, equipment malfunctions, unusual situations or other problems to the supervisor. Follow all safety rules, regulations and practices.
Observe and obey all safety rules, regulations and practices.
Perform other similar or related duties as assigned or directed by supervisor.
Knowledge of charts, specifications, and micrometers
1-2 years experience preferred
Use of numbers including decimals
Light physical effort required, equivalent to lifting, pushing, pulling 5 to 25 pounds
High School Diploma or GED Equivalent
Hours: X/O 5p-5a
2Nd Shift Intermediate Tool Room Machine Operator
Dept Code: PWM090520
Job Code: PWNY0038
Summary of Responsibilities:
Operate a variety of machine tools including mills, lathes, grinders, drill press, CNC mill, CNC lathe, band saws, and hand tools to repair, restore or machine parts following specified methods and developed repair procedures
Make parts for powder and billet making equipment
Perform bench repair operations to restore parts where close tolerances are normally required and specifically defined criteria are not used.
Work with Maintenance group to repair powder and billet making equipment
Perform routine servicing following specified procedures and written instructions such as operator's checklist for upkeep and to assure equipment operates properly.
May be required to carry out tasks not specifically listed, within the scope and skill level of this position in support of department objectives and to develop one's skills
Adhere to ACE guidelines and perform ACE duties as required
Adhere to all EH & S guidelines, including wearing of required PPE
This position is responsible for operating equipment used in the cutting, fabricating, and manufacturing of metal parts and subassemblies. Machine operators also perform tasks to complete the machine operating process including but not limited to material handling, loading and unloading machines, and entering data into computer programs.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Move and position material so machine can properly perform operation required
Cut, bend, and shape metal as a part of the pre-assembly process
Work on individually or team operated machines
Train on and operate a variety of machines based on production demands including but not limited to: punch press, press brake, plasma cutting machine, laser cutting machine, shear, roller, band saw, overhead crane, and robot work cell
Accurately operate and read measuring devices
Operate overhead cranes to stack and/or position parts
Train and work in various areas of production in response to production demands
Follow verbal and written work instructions
Attention to detail necessary to adhere to quality standards
Maintain a safe and clean work environment by complying with procedures, rules, and regulations
Regular attendance required
All other duties and responsibilities that are assigned
- High School Diploma or GED
- 6 months of experience in a manufacturing or general labor industry
- 1+ year(s) of machine operating experience in a manufacturing industry
Entry Level Machine Operator Full Time
Printers to the core, Quad/Graphics' manufacturing employees take pride in being the best at putting ink on paper for our clients. We work in a fast-paced environment focused on getting quality work out the door and into the hands of consumers. Though physically demanding, the work is rewarding and you'll excel if you thrive on rolling up your sleeves and getting the job done.
Entry level starting wage - $13.00/hr
Are you looking for a company that can provide you with both a challenging and rewarding career?
If you are, we have the perfect opportunity for you!
Quad/Graphics prides itself on having a grow-from-within philosophy where employees are provided the opportunity to learn in their roles and grow within the company. Our Accelerated Career Training programs for our Press and Finishing employees help develop motivated individuals into skilled Operators with progressive wage increases.
We are currently seeking full time Entry Level Machine Operators to grow with us! A general manufacturing position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well know magazines/catalogs/newspaper inserts and other related products in either our Press or Finishing areas. Finishing includes both Bindery and Material Handler (Forklift Driver) positions.
Essential Duties & Responsibilities
Remove product from the end of the printing press or finishing machine.
Work with loose and/or completed product by stacking onto pallets, transferring to tables & placing into a collator hopper or into mail bags.
Move product/skids with a hand jack, motorized Raymond (Big Joe) lift or Forklift (training provided).
Servicing of press and finishing machines to move product throughout the plant
Maintain accurate inventory of product with the use of an on board PC and RF bar coding system
Loading and unloading of finished product and materials from semi-trailers and auto-wrapper using a forklift.
Comply with all quality, safety and work rules and regulations.
Effectively communicate with team members.
Assist other crew members with various duties including webbing up of the press and/or special handwork in order to meet customer requests.
Follow all clean-up and housekeeping procedures.
The successful candidate will have or be able to do the following:
Must be at least 18-years of age or older
Factory, Manufacturing or other work experience where mechanical or handwork was necessary is preferred, such as laborer, machinist, assembly, bindery, mechanic, warehouse, etc.
Printing, Finishing (Bindery) or Warehouse experience is preferred.
Ability to troubleshoot and solve problems
Strong mechanical aptitude.
Ability to write and read measurements.
Ability to read, understand and follow both written and verbal instructions.
The ability to use a computer
The ability to use repetitive hand/wrist movement
Ability to lift stacks of end boards or banding strap rolls (~30 -60lbs) as needed
Ability to adjust stacker using a touch screen
Ability to use a vibrating jogging table
The ability to take stacks of loose signatures or bundles ranging (5-30 lbs.) off a pallet or conveyor up to 48" in height and transfer to table top work surface 42", and then place into a collator hopper or mail bags that potentially weigh from 5-75 lbs.
Ability to multi-task and prioritize job need.
Ability to be a team player in a fast paced, detail orientated production environment.
Ability to follow instructions and work independently
Additional Shift Information
- 12 hour rotating shifts (either 7 a.m.
7 p.m. or 7 p.m.
7 a.m.) including days, nights, weekends, and holidays. working 3 - 4 days a week
- 8 hour shifts (either 3 p.m.
11 p.m. or 11 p.m.
7 a.m.), Mon
Fri, these shifts do not rotate
Additional Company Information
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad/Graphics is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military or veteran status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories.
Drug Free Workplace
Advanced shop mathematics
Thorough knowledge of machining methods, tools, and cutting qualities of materials
Ability to demonstrate a satisfactory knowledge of the use of inspection equipment
Understand the concept of tool offsets
Understand the concept of machine zero
Understand basic machine functions and cycles
Plan and perform diversified operations required to set up and operate CNC numerical controlled lathes both 2-axis and 4-axis lathes, to machine company product component parts in process of ferrous, nonferrous and alloy metals to the satisfaction of the supervisor. Work involves the assignment to any one or more of the NC / CNC lathes proving out computer programs collaborating with Programmer and Manufacturing Engineer on programming and setup of prototype work and initial tryout.
In the role of Machine Operator, you will:
Work may involve assignment to any one or more of the secondary machines in the department including manual turret lathes, Bridgeport Mill, Radial drills, and multi-spindle drill, air testers, band saws, gluing equipment, and miscellaneous assembly quipment
Receive direction from supervisor
Work from detail parts drawings, work orders, setup, tooling, process and operating instruction sheets, and digital program
Use high precision electrical / electronic and conventional measurement instruments
Collaborate in the development of new machine programs, first run trials, and make recommendations on operation sequence, speeds, feeds, cycle times, and tooling equipment
Edit and input correction to computer console to revise program and enter applicable data to setup sheets
Review parts program file and select set tools in tool holder, turret or cross slide location
Operate console to enter prescribed program setup and offset data, back off tool offsets, and check out with dry run
Edit the program as required
Detect and report faulty operations, defective material and equipment, drawing discrepancies, and all other unusual conditions to proper supervisor
Oil and grease machine, perform mechanical repairs, replenish coolant and replace cutting inserts and tools, as required
Maintain workplace in neat and orderly condition
High School diploma or GED from an accredited school or institution
Minimum 6 months of experience in a manufacturing environment
Work overtime, weekends and holidays, as required
Work in a constant pushing, pulling, lifting, stretching, bending and other physical activities
Be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required
Lift objects weighing up to 50 lbs.
Be subjected to extreme heat for extended periods of time
Baker Hughes, a GE company (NYSE:BHGE) is the world's first and only fullstream provider of integrated oilfield products, services and digital solutions. Drawing on a storied heritage of invention, BHGE harnesses the passion and experience of its people to enhance productivity across the oil and gas value chain.
BHGE helps its customers acquire, transport and refine hydrocarbons more efficiently, productively and safely, with a smaller environmental footprint and at lower cost per barrel. Backed by the digital industrial strength of GE, the company deploys minds, machines and the cloud to break down silos and reduce waste and risk, applying breakthroughs from other industries to advance its own.
With operations in over 120 countries, the company's global scale, local know-how and commitment to service infuse over a century of experience with the spirit of a startup – inventing smarter ways to bring energy to the world.
Follow Baker Hughes, a GE company on Twitter @BHGECo, or visit us at BHGE.com.
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
Band Saw Op/Mat Handler
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Observe all safety, health and environmental procedures.
Inventory control, including loading and unloading saws, maintaining orderly stock locations and product traceability for operations and inventory restock, and a safe work environment.
Verify shop router (material, instructions, etc.).
Inspect and replace saw blades as necessary.
Verify saw dimensions or weights, utilizing measurement tools or scales as required. Sets controls to adjust speed, feed rate, and blade tensions.
Operates saws to cut, slot, groove, and trim work pieces according to specifications.
Complete required operational data entry and maintain material traceability per operations requirements.
Provide support to the Heat Treat and Forging Departments as required.
Perform yard duties, such as: dumping scale/scrap, arranging press tools, transporting material in, out, and around shop.
Assists in receiving incoming shipments, rejects damaged items, records shortages, and communicates with the buyer and/or shipper to reconcile damages and shortages. Route items to the appropriate departments as required.
Compares identifying information and counts, weighs, or measures items of incoming shipments to verify information against bills of lading, invoices, orders, or other records.
Perform additional related tasks as necessary.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!