Baseball Inspector And Repairer Job Description Sample
Technical Inspector Wheel
The Technical Inspector Wheel performs technical inspections and verifies the work performed on tactical wheeled vehicles, material handling equipment and power generation equipment and their sub-systems IAW appropriate procedures and publications. Repairs mechanical, electrical, pneumatic, hydraulic and cooling system systems components, on vehicles, equipment and their subsystems as assigned IAW appropriate procedures and publications.
Performs technical inspections and verifies the work performed on tactical wheeled vehicles, material handling equipment, power generation equipment and their sub-systems IAW appropriate procedures and publications
Performs technical inspections, determines repair parts required and performs mechanical maintenance actions and repairs on various combat/ tactical wheeled vehicles IAW appropriate procedures and publications
Performs diagnostic tests, using measuring devices, instruments, test equipment, special tools and lifting devices, to identify mechanical, electrical, pneumatic, hydraulic and cooling systems failures IAW appropriate procedures and publications
Operates/tests various types of equipment, and attached systems IAW appropriate procedures and publications
Repairs mechanical, electrical, pneumatic, hydraulic and cooling system systems components, on vehicles, equipment and their subsystems as assigned IAW appropriate procedures and publications
Removes, repairs, and replaces: engine, drive train and body components; hydraulic, electrical and cooling system components as required IAW appropriate procedures and publications
Prepares, completes and maintains equipment logs, records all RSOI's and technical inspections reports, etc.; all IAW appropriate procedures and publications
Performs clean-up duties and polices the shop and work areas as assigned
Supports / participates in the Company Continuous Improvement Process (CIP) and QA Program as required
Trains, mentors, and enhances the performance of co-workers and other personnel as required
Trains, cross trains and attends training sessions as required
Complies with all Company rules, policies and procedures
Complies with all safety, environmental and quality standards and applicable COPs and DOPs
Writes performance evaluation comments / reports when placed in a control/assignment directive role
Provides for accountability and proper care of all GFE / CFE
Favorably interacts with internal / external customers
Will be required, on an as needed basis, to assist to perform functions in branch maintenance work areas; to include branch maintenance buildings, RSOI and REGEN
Performs other duties as assigned
Knowledge & Skills
Must understand and be able to use technical manuals
Must be able to read complex schematic diagrams
Field of Expertise: Inspection, trouble shooting, repair and verification of wheeled vehicles, material handling equipment, power generation equipment and equipment
Must have basic computer operating skills
Must be able to speak, read and write English fluently
Writes performance evaluation comments and reports when placed in a control/ assignment directive role
Will be required to be trained in the operation of the STAMIS (GCSS-A) and ALIMS programs and other automation systems
Up-dates technical manuals
Experience & Education
Must have seven (7) years verifiable experience in inspection, verification, repair, and maintenance on tactical wheeled vehicles and equipment (one year of track experience may be applied toward the seven years verifiable experience)
Must complete a hands-on inspection of selected vehicles with a minimum of 90% passing score to demonstrate ability to perform the duties of the position. This includes an evaluation to perform job duties.
Subject to completion of a sixty (60) day trial period
Relevant experience must include at least four (4) months experience in their current position except when promoting to a higher rated position
High school diploma or equivalent (GED)
Experience in a leadership role is desirable
Physical Requirements/Working Environment
Work under stressful circumstances and meets shorts suspense dates
Worksite for PREPO equipment includes the Branch shops, various storage yards, the Issue Yard RSOI, RUFMA/REGEN, various test tracks and other areas where the PREPO Equipment moves.
Must be free of medical restriction/ limitations that prevent the performance of required duties and/ or prevent the wearing and utilization of Personal Protective Equipment (PPE)
Must be physically capable of performing the work in conditions of extreme temperatures, low humidity, rain and blowing sand and dust
Employees shall utilize all proper lifting procedures and practices associated with all lifting and material handling tasks that are assigned and associated with this job description
May be required to work on uncommon hours of duty, extended hours, nights, weekends, and holidays
Must possess a valid California state driver's license and be able to obtain a military operator's permit for each type of vehicle or equipment required to operate
Will be required to become knowledgeable in LOGSA computer programs and perform internet research
Must be able to meet CMF criteria in accordance with DA PAM 611-21 and AR 601-210
Must have ability to obtain and maintain US security clearance at proper level
Inspector - Newburgh, NY
To perform and maintain proper inspection standards, methods and procedures used by the Service Center in complying with all applicable Federal Aviation Regulations and manufacturer's recommendations.
I. Ensures proper procedures are performed on all completed work before it is released to service. Completes all inspection and maintenance records, reports and forms required before authorized release.
II. Performs the following as delegated by the Supervisor:
A. Maintains a current file of FAA specifications, certificate data sheets and airworthiness directives.
B. Makes periodic checks on all inspection tools and for the calibration of precision test equipment as outlined in the Overhaul Manuals and the FAA Repair Station Manuals. Ensures no defective or unairworthy parts are installed in any component or unit released by the Service Center.
C. Submits reports of defects or unairworthy conditions in accordance with FAR 145.63.
D. Inspects and accepts all incoming material, i.e. new parts, supplies and repaired parts from contract service.
E. Ensures proper tagging and identification of all parts.
F. Maintains current library of aircraft maintenance manuals, parts catalogs, structure repair manuals, wiring manuals and engine manuals applicable to the Citation models.
III. Responsible for assuring completion of required inspections and maintaining files of completed work orders and inspection forms in an efficient system for easy review by supervisor.
Equivalent to a high school education plus A&P license. Requires use of arithmetic, blueprints and specifications plus knowledge of jet and piston airframe and engine principles and mechanical systems.
Requires minimum of 2 years diversified A&P mechanic experience on jet and turboprop 100 hour and annual service experience. Requires A&P license.
Must be able to obtain and maintain an Airport Security Badge through the local airport authority (if applicable)
NDT & Shop Inspector - 8810
Requisition #: 8810
Shift : 2
Start Time : 2:00 pm
End Time : 10:30 pm
Schedule Days : Monday
Position Status: Full Time (40 hrs week)
Perform salvage and repair inspections, quoting, and work scopes utilizing Caterpillar Reusability and Salvage Guidelines. Qualified candidate shall be required to obtain a Level II Magnetic Particle and Level II Ultra Sonic Certification. Must have journey-level knowledge and skills related to industrial-repair machining or welding of large parts, occasionally exceeding 20,000 lbs. Familiarity with welding, machining, thermal spray processes, and hydraulic repair are highly desirable.
Inspects all incoming components and parts for visual cracks, damage and visual wear.
Performs non-destructive inspections and tests.
Inspects all inside and outside diameter dimensions and other machined surfaces for wear.
Act as primary liaison with customers' technical and engineering personnel.
Promotes and maintains a strong, cooperative working relationship with all vendors and customers.
Supports shop personnel by obtaining material needed for the work order.
Performs final inspection of completed components and work.
Looks for correct size, finish, debarring, over spray and weld spatter
Ensures current procedures and process controls are followed on a daily basis.
Works safely at all times. Complies with all company policies, procedures and standards.
Maintains a current library of technical information. Distributes technical information to employees and customers.
Seeks increased knowledge of job related products and procedures. Learns Caterpillar components and repair procedures.
Performs special projects as assigned
Works within and promotes corporate values.
Must accomplish training and serve as a Green Belt in support of EMPIRE's Six Sigma program.
Work within and promote corporate values.
Owns and maintains personal tools. These include:
0 to 1" O.D. MICROMETER 6" CALIPERS
1 to 2" O.D. MICROMETER 6" STEEL SCALE
2 to 3" O.D. MICROMETER 12" STEEL SCALE
O TO 6" DEPTH MICROMETER 1-2-3 BLOCKS
THREAD PITCH GAUGES RADIUS GAUGE
24' TAPE MEASURE ALLEN WRENCH SET
ADJUSTABLE PLIERS WIRE CUTTERS
SCREW DRIVER SET ADJUSTABLE PARALLELS
COMBINATION OPEN AND BOX END WRENCH SET TO 1"
SMALL BORE GAUGES OR MICROMETERS TO 6"
TOP AND ROLL AWAY TOOL BOXES
Knowledge Skills and Abilities:
Ability to read, comprehend and utilize various technical manuals.
Familiarity with all machining procedures, methods and functions used.
Ability to perform geometry, trigonometry and algebraic calculations.
Ability to maintain consistent attendance.
Education and Experience:
Proof of high school diploma or General Education Degree (GED).
Must be able to communicate (speak, read, comprehend, write) in English.
Technical knowledge and experience in non-destructive testing procedures including magnetic particle inspection and ultrasonic inspection. Previous machine shop and technical testing experience.
Previous experience inspecting parts, before and after machining operations, for dimension tolerances and surface finish.
Must be able to communicate (speak, read, comprehend, write) in English.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel and talk or hear.
The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop and kneel.
The employee is occasionally required to lift and/or move up to 10 pounds.
Specific vision abilities required by this job include close vision.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; and outside weather conditions.
The employee is occasionally exposed to wet and/or humid conditions, extreme cold, and extreme heat.
The noise level in the work environment is usually office moderate.
Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. The roles and objectives of this job do not include setting corporate policy, and does not constitute a managing agent of the company.
Empire is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call 480-633-5440 and let us know the nature of your request and your contact information.
Empire Southwest is an EEO/Affirmative Action Employer
Heavy Mobile Equipment Repair Inspector
Help Requirements Conditions of Employment
This position requires membership in the US Army Reserve (USAR).
This position requires a Personnel Security Investigation.
This position is subject to Drug Abuse Testing Program requirements.
This position requires a Class A CDL within 90 days of employment.
This position requires a medical examination prior to employment.
Who May Apply: US Citizens
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.
There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.
Minimum Qualifications (Screen Out Element): Ability to Inspect. Applicants must meet the screen out element to be considered further. To meet the screen out element, applicants should document experience or show the ability to do the following: maintaining, troubleshooting, repairing, and inspecting heavy mobile equipment to include utilizing, repairing, replacing, installing, or making adjustments to mobile equipment components and parts; utilizing technical manuals for repairs; and conducting various operational test to perform final inspection.
- Failure to meet this Screen Out Element will result in an ineligible rating.
Physical Effort Required: You may be required to work in tiring and uncomfortable positions for extended periods of time. You will frequently lift and carry items weighing up to 40 pounds and push/pull/turn heavy parts or equipment.
Working Conditions: Work may be performed inside or outside. When outside, subject to variable weather conditions. When inside, subject to drafts, dirt, grease and fumes. Subject to burns, scrapes, cuts, bruises, shocks and strains while performing work.
You will be evaluated on the basis of your level of competencies in the following areas:
Ability To Inspect
Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading)
Ability To Use and Maintain Tools and Equipment
Knowledge of Equipment Assembly, Installation, Repair, etc.
Technical Practices (theoretical, precise, artistic)
Use of Measuring Instruments
This job does not have an education qualification requirement.
Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
You will be required to provide proof of U.S. Citizenship.
Appointment is subject to the completion of a favorable suitability or fitness determination, as determined by a background investigation.
Direct Deposit of Pay is required.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
This is a Career Program (CP) 17 position.
You may claim military spouse preference.
Multiple positions may be filled from this announcement.
Salary is based on the local prevailing rate.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority. To receive selection priority for this position, you must: (1) meet ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 90 or above; and, (3) submit the appropriate documentation to support your ICTAP eligibility. Additional information about the program is on OPM's Career Transition Resources website.
This position is obligated.
Position may be filled as a temporary appointment NTE one year, if a candidate is not a current permanent Army employee. Temporary appointments may be extended up to a maximum of three years.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Basis for Rating: Qualified candidates will be assigned to one of three quality categories: Best Qualified, Highly Qualified and Qualified. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.
Best Qualified. Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for the announced position.
Highly Qualified. Candidates in this category possess good skills and experience above the minimum requirements for the announced position.
Qualified. Candidates in this category meet the minimum experience requirements for the announced position.
Background checks and security clearance
Flowserve is the recognized world leader in supplying pumps, valves, seals, automation, and services to the power, oil, gas, chemical, and other industries. With more than 18,000 employees in more than 55 countries, we combine our global reach with a local presence.
4+ years of relevant experience, less experience required with college degree.
Experience in machined equipment required, in pumps highly desired
Demonstrated career interest and knowledge in Quality desired, with the ability to communicate and lead Quality initiatives at the site
Able to read technical drawings, blueprints and CAD designs; capable of geometric dimensioning and tolerancing
Functional knowledge and skills in inspection equipment, including micrometers and precision measurement tools, and in inspection methods, including NDE (e.g., mag particle, dye penetrant, and ultrasonic)
Knowledge of international quality standards
Knowledge of machining processes, and an understanding of how parts and materials flow through the shop
Must have a successful track record of collaborating with others to discuss issues in a constructive manner so that everyone learns, perspectives are shared, and ideas are evaluated
Ability to manage time and meet deadlines with minimal supervision
Competent using Microsoft Windows and Word, email, and web-based database programs
Able to work overtime and weekends as required
Job will require lifting and pushing of heavy equipment up to 50 lbs, and moving underneath and around equipment.
As the Quality Inspector for Flowserve in Vancouver WA, you will be part of a team that repairs and services pumps used in industrial settings such as refineries and factories. The Quality Inspector is involved throughout the operation, starting with receiving parts and materials, through the steps of the repair process, and to final inspection. Looking beyond the basic inspection task, the Quality Inspector drives Quality initiatives for the Vancouver site. The Inspector plays a key role in ensuring that we perform and deliver to our Customer's expectations and to the highest of Flowserve standards.
Inspect components to ensure conformity to printed specifications by using hand instruments, and other precision instruments
Ensure that gauges and tools are calibrated correctly and in compliance with quality standards, and that they are readily available to machinists and other shop employees
Inspect products and materials received from vendors and internal suppliers
Witness and sign-off in-house air-checks, hydro-tests, pre-shipment check lists, etc.
Complete final inspections and prepare final inspection documents before final assemble or customer delivery
Communicate and explain findings to others in writing, in person, and in group meetings
Play a key role in driving the Non-Conforming (NCR) and Corrective Action (CAR) processes
Complete and retain accurate, timely, thorough documentation of all inspection activities, including material certifications
Demonstrate an understanding of QA concepts and our QA Manual
Partners with and supports Regional Quality efforts as required.
Provide training about Quality processes and procedures to the Vancouver staff
Primary Posting Location:
Vancouver, Washington US
Percentage of Approximate Travel Required:
Job Posting/Business Card Title:
United States of America
Job Posting Category:
Auto req ID:
Make complete inspection of experimental and production parts and assemblies for conformance to standards, using precision measuring instruments and equipment as required.
Plan and interpret inspection procedures and sequence including necessary layout, setup, and mathematical computation required, working from engineering design prints, drawings, work orders, specifications, and standards.
Perform process inspection of experimental work operations during fabrication and assembly. Prove manufacturing and inspection capabilities of tools and fixtures by making first run inspection on parts and assemblies and present collected data to Quality Assurance for the purpose of establishing standards and procedures.
Inspect first run, production, and/or experimental parts and assemblies when inspection tooling and methods are not adequate. Plan inspection procedures including necessary layout, and mathematical computation required for all types of tooling and precision measuring devices in accordance with tooling standards, tool orders, service requests, and tool design drawing specifications, using tooling information and data from production, tooling, engineering, and other departments concerned. Inspect such tooling, including perishable tooling and cutting tools, as jigs, fixtures, dies, patterns, parallels and dies, templates, and other special and general purpose tools involving closely coordinated locating points, interrelated dimensions in more than one plane, compound angles, and irregular contours.
Recommend tool design or planning revisions to make tools more efficient and practical to operate. Perform complete or percentage acceptance inspection of all types of internal and external gears, master gears, splines and gearlike products for such dimensions as lead error, involute error, concentricity, tooth spacing, backlash and surface roughness in conformance with specifications. Inspect, adjust, make replacements and perform internal and external repair of precision measuring tools such as transits, tool gauges,master gauges, micrometers, optical comparators, and probagraph as required. Calibrate flow transducers, pressure measuring devices, and strain gauges. Lay out diagrams for use on optical comparator in accordance with engineering change or tool design change orders. Approve acceptable tooling or recommend return to vendor. Make periodic inspection checks at established intervals to determine that tools and precision gauges as described herein have retained their dimensional characteristics.
Plan, calibration, repair and trouble shooting procedures for all types of tooling and precision measuring devices
Precision measuring device experience (depth mics, calipers, micrometers)
Willing to work any shift
Previous experience in a quality position
Fire Sprinkler Inspector
What you will do
Responsible for meeting customer expectations whileperforming quality inspections.
How you will do it
Perform routine inspections, testing, servicing, installingand preventative maintenance of life safety product lines as well as similarcompetitive manufacturer's product line.
Work with low voltage wiring and associated devices for theoperation of low voltage equipment.
Learn to complete Service Acknowledgements with propercoding through communication devices, such as laptop computers and/or hardcopy.
Follow and maintain a highly structured inspection schedule.
Input, retrieve and archive inspection documentation programvia the laptop computer.
Make minor repairs and programming changes while under thedirect authorized supervision.
Complete assigned inspections on time.
Perform other duties as assigned.
The work area for this role will cover Pensacola, FL toPanama City, FL.*
What we look for
2-5 years documented experience in sprinkler systems
NICET Level II certification
Able to obtain and retain any licenses that are required byNational, State and Local codes.
Experience in reading and interpreting blueprints, diagrams,submittals, specifications, programs schematics and operational/productmanuals.
Experience with hand tools and multi-meter usage.
Experience with wet, dry, pre-action, deluge, and foamsystems
Demonstrates an aptitude for troubleshooting systems andperforming necessary repairs.
Capable of performing physical labor to include carrying andmoving equipment and tools up to 50-70 lbs.
Able to work in unusual and sometimes difficult positionsuch as climbing ladders, scaffolding and high lift equipment up to 40 feet,working within ducts, crawl spaces, above ceilings, etc.
Ability to work flexible hours including on-call rotation,nights, and weekends to meet customer requirements.
Willing to travel out of town.
Demonstrate a high level of customer service.
Ability to adhere to, implement, and follow safetyguidelines and procedures at all times.
Strong organizational skills, positive attitude, and anability to learn quickly.
Possess a valid driver's license and driving record thatmeets company requirements.
Able to pass a pre-employment background and drug test.
Johnson Controls is an equal employment opportunity andaffirmative action employer and all qualified applicants will receiveconsideration for employment without regard to race, color, religion, sex,national origin, age, protected veteran status, status as a qualifiedindividual with a disability, or any other characteristic protected by law. Formore information, please view EEOis the Law. If you are an individual with a disability and you require anaccommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou.
Work from written inspection procedures, drawings and other instructions to perform inspection of specified engine build or overhaul operations. Carry out required visual and dimensional inspection procedures prior to shipment. Refer for acceptance or identify nonconformance for quality review as appropriate and recommend necessary processes.
Follow detailed instructions to assist with the evaluation of engine in need of repair or overhaul including taking of photographs and visually inspecting engine for needed repair. Perform routine inspection of parts, accessories or equipment and effect paperwork to refer for further processing.
Coordinate parts for processing through overhaul or repair operations to ensure the most efficient and cost effective routing. Evaluate paperwork. Determine change in processes as required, and reallocate parts to work centers as needed.
Use a variety of fixed and variable measuring instruments to check dimensions and record results. Perform mathematical computations to determine extent of nonconformance.
The sky has no limits.
Flight is an instrument of human progress. It not only gets people where they want to go, it carries humanity to places it never thought possible.
At Pratt & Whitney, you'll be part of an evolving, globally diverse company that's moving fast to shape the future of aviation. Customers all over the world depend on our technology and the people behind it. As part of the team at Pratt & Whitney, you'll help answer today's challenges in powered flight while shaping and supporting tomorrow's solutions.
Recognize need and arrange for repair or replacement of equipment.
Perform routine servicing throughout the assigned area following specified procedures and written instructions such as inspector's check list for upkeep and to assure equipment operates properly.
Assist others who are responsible for inspection processes and operations such as swaps and buys and other specialized assignments within the scope and skill level of this job description.
Refer problems to leader/supervisor. May be required to train for, obtain and maintain licenses, operator permits and certifications within assigned specialization.
May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual's skills.
Inspector & Tester C
Knowledge of AC & DC electrical equipment
Experience driving a Fork Truck
Able to read and interpret electrical drawings
Self-starter able to work with minimal direction
Willingly accepts job challenges
Experience with Health and Safety programs (LOTO, PPE, MSDS, Safety etc.)
Good mechanical skills
Good communication with customer personnel
To stay connected with exciting news and the latest job opportunities from GE businesses, follow us on twitter: @geconnections
The Inspector & Tester C will complete all operations associated with AC and DC equipment repairs including Mechanical Disassembly, Stem Clean, Test and Inspect, Repair, Mechanical Reassembly and Test Run AC and DC Equipment.
As the Inspector & Tester C, you will:
Complete all operations associated with AC and DC equipment repairs including Mechanical Disassembly, Stem Clean, Test and Inspect, Repair, Mechanical Reassembly and Test Run AC and DC Equipment
Demonstrate competency in performing miscellaneous operations such as inspect, test, repair
Investigate and report on various types of electrical equipment such as AC and DC motors, generators, transformers, rotary converters and control devices
- Trade School or a High School Diploma / GED with a minimum of 1 year of manufacturing experience
Ability and willingness to work flexible shifts (day or evening), overtime including holidays and weekends
Ability and willingness to travel and complete overnight stays up to 10% of the time
Ability and willingness to obtain TWIC card
GE is the world's Digital Industrial Company, transforming industry with software-defined machines and solutions that are connected, responsive and predictive. Through our people, leadership development, services, technology and scale, GE delivers better outcomes for global customers by speaking the language of industry.
Industrial Solutions, part of GE Energy Connections, empowers smarter business operations by connecting equipment, software and services to protect, control and optimize assets within electrical infrastructures. The business provides customers, across various industries, with end-to-end product and service solutions that help ensure the reliability and protection of their electrical infrastructure. Industrial Solutions' product and service solutions add to GE's broader portfolio of leading technology solutions for the delivery, management, conversion and optimization of electrical power for customers across multiple energy-intensive industries. To learn more, please visit: www.GEIndustrial.com.
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
Part Time Equipment Quality Inspector (Yard Jockey)
The Equipment Quality Inspector will be responsible for delivering RVS's value to the customer. This individual will be primarily responsible for pre-inspecting vehicles before the customer takes delivery. S/he will also be taking scheduled vehicles for test rides as part of our scheduled RVS exercise program.
Candidates with Commercial Drivers license preferred.
High school diploma or equivalent
One to three (1-3) years of mechanical and/or customer service experience
Mechanical aptitude preferred
Must have a valid driver's license and the ability to meet Ryder's driving qualifications
Basic computer skills
Demonstrated mechanical experience/aptitude preferred
Knowledge of heavy duty truck equipment preferred
Work in an outside environment
Work flexible hours including shift work, weekends, holidays and, possibly, in a different location
Follow directions from multiple individuals
Exercise used vehicles on Ryder property to assure vehicles are "road ready" (check for leaks, visual inspections, and minor mechanical malfunctions)
Make recommendations/complete minor repairs on Ryder's used vehicles
Record findings/data in a variety of Ryder systems
Check in vehicles
Check for leaks/tire pressure/fluids
Check for minor mechanical malfunctions
Inspect all vehicles as they come into inventory
Complete minor repairs/adjustments, as needed
Make recommendations on possible repairs needed
Enter findings into Ryder's computer systems
Report findings and issues to Vehicle Sales Manager
Other duties as assigned
Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!