Bending Machine Operator I Job Description Sample
Numerically Controlled Tube Bending Machine Operator
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us and you can build something better for yourself, for our customers and for the world.
Set up, adjust, and operate power tube bending machines to form tubing used to fabricate plumbing components used in aircraft fuel, pneumatic, and hydraulic systems. Employment in this position also requires standing, handling, rotation of head/neck, lifting and carrying 10-35 pounds, lifting and carrying less than 10 pounds, pushing/pulling 10-35 pounds, pushing/pulling less than 10 pounds, bending and twisting at the waist, walking, contact with metals, lubricants, exposure to noise, atmospheric conditions and energized sources, and the use of personal safety gear for face/eye, hand/arm, ears and feet. Check machine for missing, loose, or damaged equipment.
Duties and Responsibilities:
Obtain work package from storage rack based on schedule requirements or set up that is on bending machine.
Work priority jobs first or those requested by coordinator or supervisor.
Ensure that correct material (type, size, heat lot, and quantity) is available and free from visible defects.
Prepare to set-up job or run previously set-up job by reviewing work order, tie-in sheets, operator's or setup documents, blueprints, or CATIA plots. Identify type of set-up required.
Select and install machine accessories and holding devises (e.g., collet, radius block, pressure die, clamp die, mandrel, mandrel rod, and wiper die, if needed).
Verify that apparatus is in good condition.
Adjust bending machine by setting centerline, adjusting collet, mandrel rod length, pressure die, wiper die if used, and machine pressure.
Check machine set-up and/or parts completed by previous operator to determine progress on a job and ensure safe working conditions, as required.
Perform test bend to verify that bends are within tolerance for ovality, angle, and are free from tool marks.
Perform 20 degree and 120 degree bends and measure angles of those bends using protractor to check for spring back.
Enter measured angles into control panel of bending machine if different than required angle to reset proportional and constant spring back and achieve drawing bend angle. Check tubes using five axis digitizer (Super Gauge) and enter data into tube bending machine to make any needed corrections of bend angles.
Set up checking fixtures on mylar pattern to index points and check tubes for correct bends and mark tube ends to be trimmed to correct length.
Handle and dispose of hazardous materials (e.g., coolants, solvents, shop towels) in approved manner (per Material Safety Data Sheets and Boeing requirements) using personal protective equipment as required.
Check work after completion of each operation in job and/or completed job to ensure parts are complete per drawing and that there are no defects.
Perform Statistical Process Control (SPC) functions as required.
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Relocation Assistance Available
No. Relocation assistance is not a negotiable benefit.
- High school graduate or GED preferred.
Required Skills & Experience:
- Employment in this position also requires standing, handling, rotation of head/neck, lifting and carrying 10-35 pounds, lifting and carrying less than 10 pounds, pushing/pulling 10-35 pounds, pushing/pulling less than 10 pounds, bending and twisting at the waist, walking, contact with metals, lubricants, exposure to noise, atmospheric conditions and energized sources, and the use of personal safety gear for face/eye, hand/arm, ears and feet.
US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
This is an hourly position governed by the IAM Collective Bargaining agreement.
Contingent Upon Program Award
Machine Operator III - Fin Machine Operator 2Nd Shift
Ensuring Chart's Success…
Chart's manufacturing group is critical to building our products on time and of the highest quality to our customers. The Machine Operator III will work towards our production goals along with peers through the direction of lead man, shift supervisor, and plant manager.
What Your Day-to-Day Activities Will Be…
Candidates will have be running McElroy and Happy fin tube machines
Reads, interprets drawings and written instruction applicable to specific machining process.
Performs set-up and operation as required without supervision.
Performs all required measurements.
Capable of required tool selection for required task.
Trains, or assists in training new employees.
Can safely operate overhead or jib type cranes and rigging.
Performs all non-electrical preventative maintenance as indicated by supervision for specific machinery.
Adhere to all safety guidelines and policies.
Other duties as assigned.
Your Professional Experience Should Be…
- The ability to reading a tape measure as well as blue prints.
Your Education Should Be…
- High School Diploma or Equivalent Work Experience
Your Physical Work Environment Will Require…
While performing the duties of this job, the employee is regularly required to:
Standing for prolonged periods of time.
Occasional repetitive lifting up to 60 lbs as regular daily activities necessitate.
Handle or feel objects.
Tools or controls and talk or hear.
The employee is occasionally required to walk, stoop, kneel, crouch or crawl.
Chart Industries is an equal opportunity employer.
M3T Skilled Machine Operator Trainer (Internal Applicant Only)
M3 Skilled Machine Trainer
Panasonic Energy of North America (PENA) is collaborating with Tesla Motors, Inc. in a large-scale advanced battery manufacturing facility known as the Gigafactory near Reno, Nevada which is known for its quality of life and expansive outdoor adventures. Panasonic manufactures and supplies cylindrical lithium-ion cells for the world's leading electric vehicle manufacturer, Tesla Motors, Inc. Based on the battery demand from Tesla, the Gigafactory plans to produce cells which will double the world's current production.
Our mission at PENA is to make the vision of affordable Electric Vehicles a reality by production of the world's safest, highest-quality, and lowest-cost batteries. Through this effort we will create a clean energy society and our products will change society's use of and perceptions of electric power.
Primary Role and Responsibilities
M1-M3 skilled experience in one or more process in the battery manufacturing process.
Understands fully and always works in compliance with SOP and safety standards
Demonstrated capabilities in equipment and system maintenance.
Demonstrated trainer training knowledge.
Role models & guides others to correctly and effectively perform to SOPs.
Demonstrates sensitivity to other people, their learning styles and their diverse backgrounds
Ability to work with others at all levels in organization to achieve training goals & solve problems.
Facilities learning, collaboration and interactions between employees, shift leads and supervisory personnel that lead to productive and positive outcomes.
Maintains composure under pressure and in learning of the trainee.
Well organized and to organize and energize others.
Shift will be from 1pm to 10pm
Education and ExperienceThis position requires a High School Diploma or GED, plus 2 years' experience.
AA/AS degree in technical writing, engineering, draft, or related field desired
3 years pertinent experience.
Must be certified in Train the Trainer Program
Able to analyze data
Strong knowledge of soft skills affecting the overall functioning of training
Excellent evaluative assessment and training skills
Excellent verbal and written communication skills
Good interpersonal abilities
Physical DemandsMust wear PPE including, safety shoes, clean suit, dust mask or respirator, gloves, safety glasses/safety goggles, hair net during picture and/or video taking on site. Ability to climb stairs, climb ladders, reach, squat, tolerate prolonged standing/walking, balance, bend from trunk, crawl, kneel, push and pull objects. Must be able to work up to 12 hour shifts.
Work EnvironmentMust be able to work in a clean room environment. Exposure to heat, dust, and noisy conditions.
Language SkillsMust be able to read and understand English instructions, written and verbal.
Supplemental InformationIn addition to an environment that's as innovative as our products, we offer competitive salaries and benefits. Panasonic is an Equal Opportunity employer, and all qualified applicants will receive consideration for employment without regard to: race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. All qualified individuals are required to perform the essential functions of the job with or without reasonable accommodation.
Pre-employment drug testing is required. Due to the high volume of responses, we will only be able to respond to candidates of interest. All candidates must have valid authorization to work in the United States. Thank you for your interest in Panasonic Energy of North America.
Location/Division:Sparks, NV, USAJob Requisition:KR0454
Advanced shop mathematics
Thorough knowledge of machining methods, tools, and cutting qualities of materials
Ability to demonstrate a satisfactory knowledge of the use of inspection equipment
Understand the concept of tool offsets
Understand the concept of machine zero
Understand basic machine functions and cycles
Plan and perform diversified operations required to set up and operate CNC numerical controlled lathes both 2-axis and 4-axis lathes, to machine company product component parts in process of ferrous, nonferrous and alloy metals to the satisfaction of the supervisor. Work involves the assignment to any one or more of the NC / CNC lathes proving out computer programs collaborating with Programmer and Manufacturing Engineer on programming and setup of prototype work and initial tryout.
In the role of Machine Operator, you will:
Work may involve assignment to any one or more of the secondary machines in the department including manual turret lathes, Bridgeport Mill, Radial drills, and multi-spindle drill, air testers, band saws, gluing equipment, and miscellaneous assembly quipment
Receive direction from supervisor
Work from detail parts drawings, work orders, setup, tooling, process and operating instruction sheets, and digital program
Use high precision electrical / electronic and conventional measurement instruments
Collaborate in the development of new machine programs, first run trials, and make recommendations on operation sequence, speeds, feeds, cycle times, and tooling equipment
Edit and input correction to computer console to revise program and enter applicable data to setup sheets
Review parts program file and select set tools in tool holder, turret or cross slide location
Operate console to enter prescribed program setup and offset data, back off tool offsets, and check out with dry run
Edit the program as required
Detect and report faulty operations, defective material and equipment, drawing discrepancies, and all other unusual conditions to proper supervisor
Oil and grease machine, perform mechanical repairs, replenish coolant and replace cutting inserts and tools, as required
Maintain workplace in neat and orderly condition
High School diploma or GED from an accredited school or institution
Minimum 6 months of experience in a manufacturing environment
Work overtime, weekends and holidays, as required
Work in a constant pushing, pulling, lifting, stretching, bending and other physical activities
Be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required
Lift objects weighing up to 50 lbs.
Be subjected to extreme heat for extended periods of time
Baker Hughes, a GE company (NYSE:BHGE) is the world's first and only fullstream provider of integrated oilfield products, services and digital solutions. Drawing on a storied heritage of invention, BHGE harnesses the passion and experience of its people to enhance productivity across the oil and gas value chain.
BHGE helps its customers acquire, transport and refine hydrocarbons more efficiently, productively and safely, with a smaller environmental footprint and at lower cost per barrel. Backed by the digital industrial strength of GE, the company deploys minds, machines and the cloud to break down silos and reduce waste and risk, applying breakthroughs from other industries to advance its own.
With operations in over 120 countries, the company's global scale, local know-how and commitment to service infuse over a century of experience with the spirit of a startup – inventing smarter ways to bring energy to the world.
Follow Baker Hughes, a GE company on Twitter @BHGECo, or visit us at BHGE.com.
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
Machine Operator - Sparks, NV
Dura-Line a leading manufacturer of counduit, pipe, and conduit products and accessories is looking for Downstream Machine Operators to operate equipment. Entry level, willing to train. Base starting wage is $14.00 an hour and up to $20.00.
DUTIES AND RESPONSIBILITIES:
Places the correct reel onto reeler and prepare for start-up.
Reel must be in good condition.Operates reeler (Manual and auto mode).
Monitors print and footage markings. Makes corrections as needed.
Monitors for continuous stripe (if required).
Knows and understands the quality requirements for all products being produced.
Makes all checks that may be required to assure that the product being wound on the reels meets the product requirements.
These checks will include, but are not inclusive:
Check for proper puller pressure.
Check for stuck cable on C-I-D (Cable In Duct) products.
Check for hot spots on the duct.
Check surface temperature of duct.
Check for print quality.
Check surface quality of duct.
Check for holes, die-face build-up on duct.
Check for loss of stripes.
Before making the necessary adjustments, informs the supervisor or extrusion technician of problem areas.
Ensures wraps on reels are neat.
Cuts conduit, ties-off, and caps conduit when each reel, and cable if applicable, is complete.
Paints and stencils wood reels if required.
Grinds line scrap as it is produced and stacks scrap.
Assists extrusion technician in line start-ups.
Maintains a neat and orderly work area.
Assists other operators in cutting conduit, tie-offs, and reel changes.
Follows all safety requirements for this position and all company safety guidelines.
Performs any other duties as assigned by supervisor.
Completes appropriate paperwork to ensure accurate inventory transactions.
EXPERIENCE AND/OR EDUCATION REQUIREMENTS:
High school diploma or GED is desired.
Ability to read and write English.
Ability to perform simple math, add, subtract, multiply, divide and take measurements.
Ability to lift more than 100 pounds with reasonable assistance.
Ability to lift 50 pounds with or without reasonable assistance.
Ability to climb ladders, listen to equipment, look for defects in product and sense temperature changes in the finished product.
Ability to hold conduit and drive nails into reel flanges simultaneously.
Ability to move from one area to another by stepping over and/or bending under objects.
Ability to spend up to 12 hours a shift on your feet and around hot machinery.
Machine Operator - Mixer Operator
Our client is on the northwest side of Grand Rapids. Must have 6 months of industrial experience. Must be able to perform heavy lifting tasks throughout the shift. This is a physically demanding job. Positions involve opening bags of ingredients and dumping into machines.
3:50PM TO 12:00AM
11:50 PM TO 8:00AM
Hours may vary.
*Running a machine
*Packing, line work
*Inspection of bakery products
*Industrial / manufacturing experience
*Must be able to lift up to 50 lbs.
*Able to comply with GMP policies
*Pre-employment drug screen and nationwide background check
Experience the Williamson Difference:
*Great Benefits (Health Insurance, Vacation Pay, 401k, Referral Bonus, Weekly Pay, Verizon Discount)
*Locally owned and operated
Celebrating 25 years in business
Williamson Employment Services, Inc. is an equal opportunity employer and will not discriminate in the assignment of its employees on the basis of race, color, creed, national origin, sex, age, disability or veteran status. Discriminating orders will not be honored.
1QDH, 1QDJ, 1QDK
2Nd Pressman/Bindery Machine Operator Trainee
Would you like to build a career with a great company while operating new equipment? Suttle-Straus is looking for 2nd Pressman/Bindery Machine Operator Trainees to join our award winning team on second and third shift! The ideal candidates have a strong mechanical aptitude and an interest in the graphic communications industry.
Suttle-Straus is a premier provider of printing, digital production, wide format, mailing, custom kitting, warehousing, and distribution services. Our success is founded on three core principles: A clear focus on meeting and exceeding customer expectations; a long history of implementing new technologies to increase quality and efficiency; and the importance of building an outstanding workforce. Winner of the Printing Industries of America's Best Workplace award for 18 consecutive years, Suttle-Straus offers a collaborative work environment, great benefits and fantastic co-workers.
We offer a competitive benefits package with immediate eligibility for health, dental, vision and life insurance, and eligibility after 30 days for a company matched 401(k) plan. Generous paid time off accrues monthly from date of hire.
Suttle-Straus is an equal employment opportunity employer.
The primary purpose of this role is to assist machine operators in the pressroom and operate a wide range of finishing equipment: folders, cutting systems, saddle stitchers, letter-press and small finishing equipment, to meet or exceed customer expectations with regard to quality, cost and timely delivery. This position requires the Operator to be detail orientated and have a strong mechanical aptitude.
Essential Job Functions:
Insure efficient and cost effective operation of equipment
Interpret and follow direction from a work ticket
Interpret layouts and ticket information
Check that correct paper is issued and the correct count
Assist with equipment make ready and set up
Assist in mounting plates and other items needed to process work
Assist in the overall set up of the equipment, such as sheet size, coatings, blankets, etc.
Check work against layouts, proofs and ticket information
Assist in wash up between jobs
Fill out necessary paper work and records (check list, maintenance log, stock usage, etc.)
Monitor product quality
Trouble shoot and perform adjustments and repairs as needed
Follow daily schedule to meet delivery dates
Insure all equipment and company procedures are followed
Mechanical aptitude to set up and operate: MBO, Stahl & Polar Equipment systems or similar models from other manufacturers
Skills, Educational & Physical
High School education or equivalent professional experience
Basic math skills
Self-motivated with strong mechanical trouble shooting abilities
Ability to work in a fast paced production environment
Ability to work well with co-workers in a team environment
Ability to operate computer based technology
Constant standing and/or walking
Frequently lift up to 40 lbs.
Occasionally lift up to 50 lbs.
Frequently squat or kneel
Willingness and ability to work second shift, 2 to 10 pm, or third shift, 10 pm to 6 am
Machine Operator - Seasonal
Shift: Must be available to work any shift and be on call
Pay rate $11.60 an hour
Job Description & Requirements
The Vacation relief employee is responsible for performing all the duties related to receiving, blow mold, and filling machine operations. This position will relieve other operators while they are on vacation.
Accurately document all production runs, downtime, weights, code dates and label verification.
Subject to on-call duty in cases of plant emergency situations.
Collect first, last and product changes for lab testing.
Sanitize fillers at specified intervals and protect product integrity at all times.
Operate manual and/or automated CIP equipment as well perform manual cleaning.
Maintain communication with other departments, management and employees and notify them of any problems and/or concerns that may restrict the efficiency of production.
Ensure all paperwork is filled out in a clear, legible and accurate format, and completed with required information. Ensure all required information is documented in accordance with SOP's.
Analyze process data and equipment performance data to improve quality, throughput, and troubleshoot.
Utilizing continuous improvement mindset, assist in identifying opportunities to improve processes.
Follow Good Manufacturing Practices.
Maintain a clean, sanitary and safe work area.
Follow all required work safe practices. This would include wearing of all required PPE in designated areas, confined space safety, safe chemical handling, fall restraints, etc.
Responsible for food safety, pre-requisite programs and food quality related to designated area. Report any food safety and food quality related issues to management immediately.
Perform other duties as assigned.
High School Diploma or GED preferred; or one to two years related experience and/or training; or, equivalent combination of education and experience.
Able to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals.
Experience within the food and beverage industry preferred.
Must be able to stand, walk, kneel and bend for virtually the entire shift. Must be able to lift up to 50 pounds occasionally including overhead.
Must be able to work in a wet environment. Some exposure to cleaning chemicals.
[Delete if not Ice cream plant: For ice cream plants: Exposure to nut allergens.]
Overtime and working on holidays is often required.
Be able to effectively work in a team environment.
Effective verbal and written communication skills.
Ability to work in a fast paced environment.
Must be able to pass all pre-employment screens (including drug, background and criminal checks).
EEO StatementDean Foods considers marijuana (including medical marijuana) to be an illegal drug. Dean Foods will rescind offers of employment to applicants who test positive for marijuana (unless restricted from doing so by state or local law). Dean Foods is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
CNC Machine Set-Up Operator
Vapor Bus International is a division of Wabtec Corporation and is the principal door equipment supplier to the North American bus industry. A broad range of products is available for transit and commuter buses, intercity and tour coaches, and utility vehicles.
The company offers complete automatic door systems as well as individual components such as actuators, door controls, door panels, seals, and door accessories. Both pneumatic and electric actuators are available. Control options range from simple electro-mechanical devices to high-capability, microprocessor-based systems.
Vapor maintains strong relationships with transit properties throughout the U.S. and Canada and is an active member in the American Public Transportation Association (APTA) and Canadian Urban Transportation Association (CUTA). Vapor strives to understand the needs of the evolving transit industry and to provide products and services that satisfy these needs. Sales and service for Vapor products is provided by representatives located at offices in New York, New York; Buffalo Grove, Illinois; Los Angeles, California; Sacramento, California; Toronto, Ontario; Baltimore, Maryland; Austin, Texas; Manchester, UK, and Sassuolo, Italy. Vapor Bus International is committed to combining the skills and experience of its people with the best equipment and processes to offer world-class solutions for its customers' needs.
Must have the ability to Set-Up Four different types of machines, preferably a combination of VMC's, HMC's, TMC's, Co2 Lasers, Fiber Laser, Break press and /or Robotic Welders. Produces machined parts by setting up, and operating computer numerical control (CNC) machines; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Knowledge of modifying 2D mill fixtures, turn and bore lathe jaws manually utilizing CNC controls readout.
Capable of editing Programs Mills, Lathes, Break Press, Lasers and /or Robotic Welders by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
Maintains equipment by completing daily preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions.
Sets-up aforementioned machines by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, indicating vice or work piece, bushings, cams, gears, stops, bar feeders, cutting conditions, bending radius and bending pressure.
Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
Verifies settings by measuring positions, first-run part, and sample work pieces; adhering to international standards. Able to read micrometers and calipers.
Maintains safe operations by adhering to safety procedures and regulations.
Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
Documents actions by completing production and quality logs.
Updates job knowledge by participating in educational opportunities; reading technical publications.
Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.
Ability to follow instructions, and management directive.
Ensure a safe working environment, good housekeeping and 5's for your respective area and all of VBI
Associate's degree (A. A.) or equivalent from two-year College or technical school; or two (2) years to four (4) years related experience and/or training; or equivalent combination of education and experience.
Requires basic understand of blue print reading, leadership capability and ability to solve problems. Ability to lift up to 40 pounds.
Machine Operator - North Bend
Genie Industries/Terex Aerial Work Platforms (AWP), a business segment of the Terex Corporation, is headquartered in Redmond, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.
Position: Machine Operator
Responsibilities and Scope:
Operates equipment and other related machining/fabrication equipment in a production environment.
Essential Functions (Listed in order of % of time)
Plans and participates in tool selection and work set up.
Sets up and operates machines to cut, shape, or form metal work pieces to specifications. Reviews setup sheet and specifications to determine setup procedures, cutting sequence, and dimensions of finished product.
Attaches fixture to machine bed and positions and secures the work piece in the fixture according to the setup instructions using clamps, bolts, hand tools, power tools, and measuring instruments such as rules and calipers.
Assembles and positions cutting tools in tool holders and/or spindles specified for that machine.
Manipulates controls and enters commands to a specified start point, then starts the machine. Observes and listens to machine operation to detect malfunctions.
May perform simple adjustments to the machine.
Changes cutting tools and location of work pieces during the machining process as specified in the setup instructions.
Measures work pieces for conformance to specifications, using measuring devices such as micrometers, tape measures, and gauges.
Applies “Just in Time” production techniques to promote maximum machining operations.
Maintains records related to completed machine operations to provide up-to-date reference for scheduling.
Performs other duties as assigned that support the overall objective of the position.
Knowledge and Skills Working knowledge of the procedures and techniques, materials, tools, equipment, layouts and set-ups used in the operation of cutting and machining on fabrication equipment. Requires a basic knowledge of machine equipment maintenance. Must have an in-depth knowledge of safe work practices. Working knowledge of reading and interpreting blueprints. Must possess good communication and interpersonal skills.
Abilities The ability to perform all of the essential duties in the area machine operations with minimal supervision is required. Team Member must be able to use and maintain all of the tools and equipment used during the routine performance of duties. Must be able to read and use micrometers, gauges, calipers, and other measuring and inspection equipment. Requires ability to identify and analyze machine operation problems and communicate with maintenance. Must be able to understand and follow oral and written instructions, maintain routine records and interpret plans and specifications. Must be able to perform arithmetic operations quickly and accurately.
Working Conditions Works in a manufacturing environment that requires moving equipment weighing up to 50 pounds, bend, pull, push and stand for long periods of time.
Education and Experience The position requires a minimum of two years experience operating tube benders and production saws, a good working knowledge blueprint reading, and precision measurement. Experience operating multi-types of forklifts is preferred.
Job ID 2017-36075
# Positions 1
Location: WA-North Bend
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!