Bending Machine Operator Ii Job Description Sample
Numerically Controlled Tube Bending Machine Operator
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us and you can build something better for yourself, for our customers and for the world.
Set up, adjust, and operate power tube bending machines to form tubing used to fabricate plumbing components used in aircraft fuel, pneumatic, and hydraulic systems. Employment in this position also requires standing, handling, rotation of head/neck, lifting and carrying 10-35 pounds, lifting and carrying less than 10 pounds, pushing/pulling 10-35 pounds, pushing/pulling less than 10 pounds, bending and twisting at the waist, walking, contact with metals, lubricants, exposure to noise, atmospheric conditions and energized sources, and the use of personal safety gear for face/eye, hand/arm, ears and feet. Check machine for missing, loose, or damaged equipment.
Duties and Responsibilities:
Obtain work package from storage rack based on schedule requirements or set up that is on bending machine.
Work priority jobs first or those requested by coordinator or supervisor.
Ensure that correct material (type, size, heat lot, and quantity) is available and free from visible defects.
Prepare to set-up job or run previously set-up job by reviewing work order, tie-in sheets, operator's or setup documents, blueprints, or CATIA plots. Identify type of set-up required.
Select and install machine accessories and holding devises (e.g., collet, radius block, pressure die, clamp die, mandrel, mandrel rod, and wiper die, if needed).
Verify that apparatus is in good condition.
Adjust bending machine by setting centerline, adjusting collet, mandrel rod length, pressure die, wiper die if used, and machine pressure.
Check machine set-up and/or parts completed by previous operator to determine progress on a job and ensure safe working conditions, as required.
Perform test bend to verify that bends are within tolerance for ovality, angle, and are free from tool marks.
Perform 20 degree and 120 degree bends and measure angles of those bends using protractor to check for spring back.
Enter measured angles into control panel of bending machine if different than required angle to reset proportional and constant spring back and achieve drawing bend angle. Check tubes using five axis digitizer (Super Gauge) and enter data into tube bending machine to make any needed corrections of bend angles.
Set up checking fixtures on mylar pattern to index points and check tubes for correct bends and mark tube ends to be trimmed to correct length.
Handle and dispose of hazardous materials (e.g., coolants, solvents, shop towels) in approved manner (per Material Safety Data Sheets and Boeing requirements) using personal protective equipment as required.
Check work after completion of each operation in job and/or completed job to ensure parts are complete per drawing and that there are no defects.
Perform Statistical Process Control (SPC) functions as required.
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Relocation Assistance Available
No. Relocation assistance is not a negotiable benefit.
- High school graduate or GED preferred.
Required Skills & Experience:
- Employment in this position also requires standing, handling, rotation of head/neck, lifting and carrying 10-35 pounds, lifting and carrying less than 10 pounds, pushing/pulling 10-35 pounds, pushing/pulling less than 10 pounds, bending and twisting at the waist, walking, contact with metals, lubricants, exposure to noise, atmospheric conditions and energized sources, and the use of personal safety gear for face/eye, hand/arm, ears and feet.
US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
This is an hourly position governed by the IAM Collective Bargaining agreement.
Contingent Upon Program Award
Machine Operator II - Press Break - 1ST Shift And/Or 2ND Shift
The Press Brake Set Up/Operator will be responsible for performing all phases of the press brake operation. This will include set up, programing and loading/unloading parts.
Sets up work from order or prints according to job requirements as directed by the Supervisor and/or Group Leader.
As required, enters program into the machine.
Uses precision measuring instruments to check work. Performs first piece inspection to double check dimensions and tolerances before proceeding with remainder of order. Continues to inspect parts as order is being run.
As required, positions machines in relation to the appropriate axis as planned in programming.
Sets stops for depth and angles.
Removes finished parts from machine, counts and places on skid.
Transports materials as needed using forklift.
Performs necessary housekeeping duties to maintain clean work environment.
Responsible for basic maintenance of tools in work area.
Performs other duties within the scope of the job assignments as directed by the Supervisor or Group Leader.
Meets department quality, attendance and productivity requirements.
Performs duties in compliance with all safety rules and regulations required by Company, federal, state and local provisions.
All other duties as assigned
KNOWLEDGE AND EXPERIENCE REQUIREMENTS:
Must be able to read blueprints.
Must have prior experience operating Brake Presses r comparable equipment.
Must be able to use tape measure for and Press Brakes. Calipers for Press Brakes.
Ability to drive a forklift.
Must be able to communicate effectively and work in a cooperative manner to support a team environment.
Must have satisfactory job performance and an acceptable attendance and disciplinary record in current position.
- This position requires moderate to considerable physical effort working with average or heavy weight material, not to exceed fifty pounds (50 lbs). This position also requires standing for extended periods of time. The incumbent must have the ability to carry objects; perform dynamic activities including reaching and stretching; and frequent bending and twisting of the torso.
- Continuous, and at times, concentrated mental and visual attention where the work is repetitive or duties are diversified and require continuous alertness and /or activity.
- Typical shop floor with possible exposure to dirt, dust, fumes, heat, cold, noise, vibration, oil and water. May be exposed to any number of these elements.
- Safety glasses with side shield steel toed safety shoes, gloves and other personal protective equipment as necessary.
Machine Operator - Fabrication II (Press Brake) - 2Nd Shift
Generac Power Systems – Work with the leader in the power industry! Our office in Eagle, WI is seeking a Machine Operator - Fabrication II.
The Machine Operator – Fabrication II is expected to perform under the direction of the area supervisor, manufacture parts per plant specification in an accurate and timely manner utilizing a CNC Machining Center/Fabrication equipment while recognizing safety and efficiencies. This position reports directly to Production Manager or Supervisor.
Essential Duties and Responsibilities:
Regular and prompt attendance and the ability to work schedule as define and overtime as required.
Set up, adjust and operate CNC Machining Center
Read and interpret blueprint specifications to determine procedures, verify programs and tooling
Perform complex machine set ups and critical operations
Position and replace tools, and set in relation to machine
Use a variety of precision measuring devices to set up and adjust work and verify conformance of work to specifications
Understand special material handling required for materials and equipment used in the work cell
Assist in other work areas as needed
Repair/correction of errors
Participation in training sessions
Strong mechanical aptitude and mathematical skills.
High School diploma or equivalent
An understanding of machining/fabricating fundamentals
Experience working with fabrication machines, specifically milling machine/Brake/Turret drill press, saw, grinder.
Ability to effectively communicate
Contributes to identifying problems and implementing appropriate countermeasures.
Intermediate PC knowledge.
Basic knowledge of Microsoft Office products
Strong problem solving and reasoning skills
Ability to perform reading, writing, and math functions.
Preferred experience on equipment and automation consistent with a metal fabrication, paint, and assembly operation.
Intermediate mechanical aptitude, ability to understand complex issues and systematically work toward resolution.
Ability to interpret drawings, schematics and machine specifications.
While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to manipulate objects, tools or controls and talk or hear. The employee is regularly required to walk; stoop; crouch; bend and reach above shoulders. The employee must frequently lift and/or move up to 50 pounds unassisted and up to 100 pounds with assistance, waist high, up to 10 feet away. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Temperatures can vary from cool to warm depending upon the season. The employee must comply with the assigned location PPE requirements including but not limited to safety glasses, hearing protection, appropriate gloves, clothing and shields for required tasks and closed toed or safety shoes as required by facility safety policies.
Machine Operator II - 1St Shift
Machine Operator II
The Machine Operator II operates assigned stations and all other associated work including preventative maintenance, machine changeovers, making minor adjustments to maintain greatest operational efficiency, assist other mechanics, etc.
Join the team at Dr Pepper Snapple Group and make a difference by pursuing everything that you do with the determination that sets us apart from our competitors. Driving for results leads to recognition and personal growth within the company, helping us to achieve our goal to "Be the Best Beverage Business in the Americas". The success that comes from within each of us is recognized, and creates opportunities for your growth in the organization.
Shift and Schedule
This is a full time permanent position working on 1st shift. Must be flexible to work overtime and weekends as the business may need.
Handle empty cases and solve other line issues.
Train other operators on use of machinery.
Perform best practice quality checks on line and equipment.
Set up machinery and ensure all production materials are available.
Operate and monitor equipment and replenish materials as needed.
Monitor line for defective materials and perform any other related work in accordance with line quality.
Record all data as required (i.e. charts, necessary process adjustments based on data findings, etc.).
Clean and sanitize all equipment and facility as required.
We take great pride in offering our people benefits that are competitive. We appreciate hard work, innovative ideas and unending passion, which is why we provide a comprehensive set of benefits and options designed to fit the unique lifestyles of our employees from day one based on eligibility requirements.
High school diploma or general equivalency diploma (GED)
2 years prior experience with operation of high-speed production machinery and monitoring of product quality
Lift, push and pull a minimum of 50lbs repeatedly
Dr Pepper Snapple Group, Inc. (NYSE: DPS) is one of North America's leading refreshment beverage companies, manufacturing, bottling and distributing more than 50 brands of carbonated soft drinks, juices, teas, mixers, waters and other premium beverages.
With a brand heritage spanning more than 200 years, the DPS portfolio includes some of the most recognized beverages in the Americas. More than 75 percent of the company's overall volume is from brands that are either #1 or #2 in their flavor categories. In addition to its flagship Dr Pepper and Snapple brands, the DPS portfolio includes 7UP, Mott's, A&W, Sunkist soda, Hawaiian Punch, Canada Dry, Schweppes, RC Cola, Diet Rite, Squirt, Peñafiel, Yoo-hoo, Rose's, Clamato, Mr & Mrs T and other well-known consumer favorites.
Dr Pepper Snapple Group is an equal opportunity employer and affirmatively seeks diversity in its workforce. Dr Pepper Snapple Group recruits qualified applicants and advances in employment its employees without regard to race, color, religion, gender, sexual orientation, gender identity, gender expression, age, disability, genetic information, ethnic or national origin, marital status, veteran status, or any other status protected by law. EOE Minorities/ Females/ Protected Veterans/ Disabled
Machine Operator II - Laser /Turret Operator 2Nd Shift
Job Description: You can 'build things' anywhere . . . so choose to work for a company that values what you bring to the table, provides you with an opportunity to succeed, challenges your skills, grows your talent, makes safety a priority, and gives you the chance to build a real career – one filled with challenge, passion, pride, and satisfaction.Under general supervision, the Machine Operator responsibility may include, but are not limited to set up and operate production equipment in accordance with established procedures and guidelines to insure quality, safety, and efficiency standards are met to satisfy customer requirements.We put the 'fast' in fast food and the refinement in fine dining. We put the icy refreshment in sodas and the 'rocks' in signature cocktails. Be part of an industry that touches every life. Advance your career with the leader in foodservice innovation!
Essential Job Functions:
Read and interpret job order, diagrams, and/or blueprints to select, position, and secure machinery and materials
Operate manual and/or numerically controlled production machinery and equipment
Inspect product to insure conformance to quality, engineering standards, and customer requirements
Load, unload, lift, and move materials and product utilizing lifting equipment when available
Complete and maintain all associated electronic processes and paperwork (including but not limited to bar-coding, checklists, stamping, blueprints, shipping/receiving documents, accessory lists, and scanning of materials)
Perform pre-shift preventative maintenance
Maintain departmental housekeeping and 5S standards
Perform duties in accordance with current Quality Management System, Safety Management System, and Manitowoc Code of Conduct requirements
Actively participate in safety training and demonstrate competency by effectively resolving safety issues or bringing them to the attention of management
1-3 years of related experience
Ability to read and interpret blue prints
Intermediate math and reading comprehension skills
Ability to read a tape measure
Basic ability to read, speak, and understand English language
Ability to demonstrate safe and effective operation of all required equipment
Stand and walk on concrete up to 100% of work day
Ability to bend, stoop, kneel, crouch
Lift and carry up to 35 lbs alone and over 35 lbs with assistance
Ability to climb and balance
Ability to visually inspect product
Ability to use hands to reach and to handle or feel
Manual dexterity in hands for tool usage
Ability to wear all required personal protective equipment
The Delfield Company – Covington, Tennessee manufactures and markets a complete line of foodservice equipment for restaurants, hotels and institutions (including prep tables, undercounter/worktop refrigeration, and blast chillers/freezers) and specializes in custom and reach-in refrigeration. The facility in Covington is a division of Welbilt, Inc.
Machine Operator II
Our vision is to be the best provider of building products in the eyes of our customers, employees, shareholders, suppliers and communities.
At Masonite, we understand that people are key. We are a composite of diverse people who come together by showing support and respect to one another.
We hire people that demonstrate integrity under pressure. Integrity is at the foundation of everything we do. It is in each door we make, in our commitment delivery and in our honest and sincere communication.
Our employees are flexible, versatile and resilient. Our ability to weather any storm, to bend without breaking, is what allows us to hear the knock and open the door with confidence, no matter what's on the other side.
At Masonite, we hold the door open for each other and for new ideas. We want everyone to freely contribute ideas and add value, so we are positive and encouraging. This collaborative environment is what makes Masonite a transparent, fair company- one that doesn't hide behind closed doors.
We continuously strive to improve both our products and our customers' experiences. This drive leads us to revolutionize the door industry and help people walk through walls.
This position is responsible for the set up and operation of the computer controlled Trimsaw. Multiple dimensions checks are required to ensure tolerances are being held within the machine. This is a position that is fast paced with a high level of responsibility.
Set up and operate computer controlled Trimsaw; scanning tickets/barcodes
Make manual adjustments/tweaking to meet or hold tolerances
Read/interpret production schedules and tickets
Test door setup and barcode printer
Perform tooling and sanding belt changes
Perform multiple dimensions checks to ensure proper quality
Assist with performing minor maintenance
Constant communication with team and supervision
Follow safety and process procedures; guard and tools checks
Other duties as assigned by supervisor/management
Education: High School Diploma or GED
Experience: 2-3 years machining experience
Certifications/Licenses: Lock Out Tag Out (LOTO)
Knowledge, Skills & Abilities:
Ability to use basic hand and power tools; wrenches, mallet, and operating door feeder
Knowledge of all aspects of the Trimsaw machine; including maintenance, mechanical understanding and blade changes
Knowledge of production schedules/tickets and order tracking
Proficient computer skills with ability to pick up new programs quickly; AX experience a plus
Excellent communication, organization and paperwork skills
Fast paced with a high level of responsibility
Work independently with minimal supervision
Must have high attention to detail and quality
Machine Operator II
Conductssetup and operation of Computer Numerical Control (CNC) equipment, inspectsmachined features to maintain quality, adjusts machine and changes perishabletooling.
Conductssafe and timely setup of CNC equipment using the Setup Checklist.
Programs CNC machine using process flow sheet processing steps and toolingsequence. Edits CNC programs as required to attain optimalquality/quantity production.
Makes machine/tooling adjustments and CNC programming changes to bringnon-conforming out-put intospecifications.
Informs the Group Leader/Supervisor of any operating or material conditionthat would interfere with quality/quantity production.
Performs routine operator maintenance and operational checks on all tools andequipment utilized, to include: tool sharpening, machine oiling, fluidlevel/air pressure checks, safety switch functioning etc.
Performs dimensional and attribute product inspections to ensure qualityproduct is produced including 1st Article Inspection.
Conducts tool setup.
Changes perishable tooling that is worn or damaged.
Insures timely flow of parts through the machine shop by following set procedures. Makes suggestions for alternate responsibilities when application allowsadditional internal time.
Meets cycle time rates established for specific partnumbers.
Reads and interprets machine shop blueprints.
Segregates and periodically disposes of scrap material into approvedcollection containers.
Operates material handling equipment when moving materials into, around, orout of the department.
Accurately uses measurement tools such as micrometers, verniers, height gage,bore gage, and attribute style gages.
Follows all 5S practices and supports lean activities, as well as safetyregulations policies and procedures.
1 years' related experience
Ability to read and write needed to comply with written instructions andcomplete departmental paperwork.
Familiarity with Word, Excel, PowerPoint, Access, Outlook, Lotus Notes, JDE,SAP, Great Plains, HFM, PeopleSoft
Works with minimal supervision
Persists in the face of difficulties
Drives for results
Develops and coaches talent
Promotes teamwork and collaboration
Uses sound judgment
Adaptability to change and ambiguity
No calls or agencies please. Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
Equal Opportunity Employer
Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.
If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by calling 1-314-553-2544 (V/TTY/TDD) or by sending an email to email@example.com.
CNC Machine Operator I Or II (Swiss Style CNC Lathes) - 1St Shift
Job Description: Job ID: IMP000417
Direct is one of the fastest growing major dental implant companies in the
world today. We're one of the many operating companies within Danaher
Corporation's dynamic portfolio of dental companies.
Direct operates a state of the art manufacturing facility in Thousand Oaks,
California. We manufacture and distribute a broad range of value priced
surgical, prosthetic and regenerative solutions to dental professionals in the
US, Canada, and around the globe. We design and develop products which make
high quality implants more accessible to patients around the world. We educate
dentists on how to place implants and improve their patient care.
If you are
interested in working in a lean, fast moving, entrepreneurial environment where
you can learn, grow and make a difference, join us at Implant Direct.
JOB SUMMARY: Operates CNC machines in compliance with departmental
procedures. Must be capable of basic operation of CNC machine and barfeeder,
and must be capable of inspecting and changing worn or broken tools. The
Machine Operator performs basic trouble-shooting with routine guidance required
from the lead Machinist or Management personnel.
- Performs routine operation of assigned machine(s), including
start-up and shutdown. Loads raw material into barfeeder and adjusts to
- Keeps machine running throughout shift, while
monitoring product quality through regular inspection intervals.
- Troubleshoots and corrects minor problems,
obtaining assistance from lead machinists and / or Management when needed. Replaces assigned tooling as needed, i.e.
drills, taps, etc.
- Support team environment including any cell
manufacturing tasks that are needed (i.e. cleaning of product).
- Ensures that all documentation is in order (part
number, revision, etc) and is kept at the workstation. Enters data on production documents regarding
quantity produced, hours worked, etc.
- Performs general housekeeping in work areas
(cleaning work surfaces, mopping, etc).
MINIMUM REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE: High School Diploma or GED required and college level machining classes and/or formal CNC training preferred. Requires minimum of 1 year of related experience.
LANGUAGE SKILLS: Ability to read and interpret documents in English, such as operating procedures and general instructions, machine manuals, employee handbook, company policies and departmental procedures, etc.
REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written,oral, or diagram form.
Must determine on an hourly basis that machine tools are within process control. Determines when to replace tools and/or seek assistance in troubleshooting from lead.
OTHER SKILLS and ABILITIES: Familiarity with raw materials, cutting tool geometry, and related feeds and speeds. Must have knowledge of precision inspection equipment and methods (micrometers, calipers, optical comparators, etc.).
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to stand, walk, sit, reach with hands and arms, and talk or hear.
Specific vision abilities required by this job include close vision, distance vision,color vision, peripheral vision, depth perception, and the ability to adjust focus.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts.
The noise level in the work environment is usually moderate.
Implant Direct, LLC is committed to providing a dynamic and challenging work environment. Recruiting and retaining a winning team of employees dedicated to the company's quality policy is critical to our ability to provide our customers with high quality dental products.
Implant Direct, LLC offers competitive compensation and a generous benefits package. Benefits include Medical, dental, and vision insurance,401(k) plan with generous employer match, Flexible Spending Account (FSA), group term life & AD&D, Employee Assistance Program, and paid vacation and holidays.
Please visit our website at http://www.implantdirect.com/ for more information about our innovative company. Implant Direct is an equal opportunity employer.
We evaluate qualified applicants without regard to race, color, national origin, religion, gender, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. We maintain a drug-free workplace and perform pre-employment substance abuse testing.
Danaher Corporation Overview
Danaher is a global science & technology innovator committed to helping our customers solve complex challenges and improve quality of life worldwide. Our world class brands are leaders in some of the most demanding and attractive industries, including life sciences, medical diagnostics, dental, environmental and industrial solutions.
Our globally diverse team of 59,000 associates is united by a common culture and operating system, the Danaher Business System, which serves as our competitive advantage. We generated $16.5B in revenue last year. We are ranked #133 on the Fortune 500 and our stock has outperformed the S&P 500 by more than 2,000% over 20 years.
At Danaher, you can build a career in a way no other company can duplicate. Our brands allow us to offer dynamic careers across multiple industries.
We're innovative, fast-paced, results-oriented, and we win. We need talented people to keep winning. Here you'll learn how DBS is used to shape strategy, focus execution, align our people, and create value for customers and shareholders. Come join our winning team.
Machine Equipment Operator II (2263)
Job Description: Position at Paslode
Paslode, an ITW company, currently has an opening for a Machine Operator II for 3rd shift (8:00 p.m. - 6:30 a.m. M-T) in its Pocahontas, AR facility to perform setup, operation and preventative maintenance of nail collation lines.
Paslode, a division of ITW's North America Construction Businesses, has continued to shape the way homes are built for the past 50 years. As the pioneer and leading provider of innovative, differentiated fastening solutions for wood to wood construction, we offer trades and builders a line of highly engineered tools and fasteners that increase productivity and help them achieve higher quality construction. Our brand and product offering are widely recognized within our industry for superior quality, unparalleled service and unique solutions to industry needs.
ITW offers its employees a path for advancement, a competitive salary, and a comprehensive benefits package designed to help employees care for themselves, their families, and their futures.
Proficiently set up and operate equipment to meet facility goals for safety, quality, productivity and teamwork. Equipment includes but not limited to collator, dryer, thread roller and associated equipment.
Proficiently maintain machinery through preventive maintenance SOP's.
Perform all quality checks according to SOPs and quality specifications sheets.
Follow all prescribed safety practices and procedures.
Other duties as needed.
High School Diploma / GED
Ability to understand basic machinery.
Demonstrate a willingness to cooperate in a team environment.
Ability to recognize and identify parts, problems, and offer resolution.
Ability to read blueprints / specification sheets and follow instructions.
Successfully complete supplemental training (i.e. blueprint reading, technical math, and measurement tools).
Close vision is required and the ability to focus.
Ability to occasionally lift or move up to 50 pounds safely.
ITW is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.
We do not accept unsolicited resumes. To be considered an applicant, please apply online to a specific job posting.
If you are a qualified individual with a disability and are unable or limited in your ability to use or access the online application system process due to your disability, please click here for information on how to contact us directly.
Machine Operator II
Operate various machines in production environment including press, sander, shear, and various knives
Carefully follow detailed work instructions
Identify and report quality concerns
Delicately handle fragile veneer panels
Assist other areas as needed
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!