Beveler Job Description Sample
Assembles and fits to drawing dimensions of all kinds of structural, plate and mechanical materials into all types of assemblies. Must be proficient in the full skills of the trade. Welds a large variety of materials. Welds in all positions with a high degree of proficiency utilizing full skills of the trade including knowledge of common heat reactions of structural metals, and is certifiable.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Receives instructions, prints, sketches and work orders.
Reads and interprets blueprints and plans the fitting operation.
Directs and assists in handling and spreading of material, assembling material into required relationships according to detail drawings; handling and placing detail material in assembly, placing bolts, drift pins and other fastening deceives in proper locations.
Lays out work lines or fits up jigs for positioning material when required; checks, squares, and scribes all detail connections.
Responsible for work conforming to drawings and notes thereon.
Cleans up material by grinding or chipping.
Burns and tack welds for assembly purposes. Burns, copes and bevels and straightens material. Does minor layout.
Spot paints for identification marks.
Follow welding procedures.
Moves material to and from the work area. Moves welding equipment to material when necessary. Positions component parts on a table held by a fixture or jib, tacking when required.
Welds on ground level, above ground, and below ground, in any required position.
Chips, peens and grinds material to prepare for welding or finish.
Welds structural material such as plates, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship.
Straightens materials by heat or flame. May perform scarfing.
Must take and pass welding tests such as AWS D1.1.
Keeps work area clean.
Other duties may be assigned.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED), and/or 12 months experience.
SPECIALIZED KNOWLEDGE & SKILLS
Ability to read and interpret documents such as blueprints, safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively with supervisor and other employees of organization.
Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. All applications necessary to adequately perform required tasks.
Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
Certificates, Licenses, Registrations: Must complete all company required weld tests.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to walk and stoop, kneel, crouch, or crawl. The employee is occasionally required to climb or balance.
The employee must occasionally lift and/or move up to 50 lbs. The employee must occasionally push and/or pull a maximum force of 200 ft-lb. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Close mental and visual application required to interpret drawings, layout, plan work, and weld. Good judgment in determining best method and procedure to be followed. Able to work on jobs while applying safety rules at all times.
AAP/EEO STATEMENT Schuff Steel is an Equal Opportunity Employer.
Water Utilities Pipefitter I
General Description of Class Benefits Supplemental Questions
This is semi-skilled work in the installation and repair of water distribution and/or wastewater collection facilities and mechanisms. Work involves responsibility for the performance of semi-skilled duties assisting in the installation, repair, and maintenance of water and/or wastewater services and mains. The employee normally works under direct supervision, and all work is inspected in progress and upon completion.
Example of Duties:
Lays water mains; installs hydrants, valves, fittings, clamps, and sleeves; flushes lines; backfills around pipes; landscapes upon completion.
Makes routine water taps; digs holes for taps; sets up tapping mechanism; makes tie-ins; installs water service lines and meters.
Performs maintenance on materials, tools, and equipment.
Yarns, pours and pounds lead; cuts and bevels pipes; threads pipes; caulks joints.
Operates related heavy equipment such as electric grinder, air compressor, jack hammer, acetylene torch, dump truck and boom truck; may operate backhoe.
Perform helper duties for night time call out.
Performs all other associated duties in regards to the installation, maintenance of water lines/attributes and other associated services provided by the City.
Performs emergency repairs on the water distribution system after normal working hours; subject to working overtime and participating in stand-by duty.
Performs related work as required.
- High school diploma from an accredited school or its equivalent.
Required Documents: GED, High School Diploma, College Diploma or Unofficial Transcripts
Must possess and maintain a valid state of Florida driver's license.
Must be able to obtain Class "A" CDL with appropriate endorsements as are required by the employing department within six (6) months of employment.
Must be able to obtain a Class "C" Water Distribution License within eighteen (18) months of employment.
Must maintain a valid telephone number.
Required to pass and maintain qualification for:
Respiratory Protection Physical.
Qualitative and Quantitative Fit Test(s).
May be required to work overtime, or alternate hours, as necessary for the efficient operation of the department.
Position may be designated as Mission Critical by Department Director
Skill in the use of small hand tools and related equipment.
Ability to learn the methods, practices and use of tools required for pipe, main service and water meter installation, testing, and repair.
Ability to operate line locating equipment.
Ability to understand and follow oral and written instructions.
Ability to establish and maintain effective working relationships with co-workers, other City employees and the general public.
Ability to perform heavy physical manual tasks for extended periods, often in adverse climatic conditions.
Requires manual work that involves walking or standing some of the time and exerting up to 100 pounds of force on a recurring basis.
Occupation does require repetitive motion such as movement of the wrists, hands, legs and/or fingers.
The job risks exposure to some significant environmental hazards (entering confined spaces, chemical, electrical, mechanical, height, and heat), bright/dim light, inside and outside environmental conditions, asbestos containing materials and noise levels.
The job requires normal visual acuity, and field of vision, hearing, speaking, color perception, sense of smell, depth, perception, and texture perception.
All City of Lakeland positions are subject to testing (e.g. written, oral, performance, computerized, interview, and/or any combination). Candidates selected for testing will be notified via email or telephone. Please check your e-mail and telephone messages regularly, including "junk" folders. Test times and locations to be announced.
THE CITY OF LAKELAND IS AN EQUAL OPPORTUNITY/EQUAL ACCESS EMPLOYER AND A DRUG FREE WORKPLACE
Welder, Apprentice Or Journeyman I
Nidec Minster Corporation, a leader in the design and manufacture of metal forming equipment and a supplier of machining, fabrication, assembly, logistics, and foundry and aftermarket services has an opening for experienced welders.
Experienced Minster Welders are expected to be knowledgeable, productive and efficient in all duties that are core competencies to the welding function. A Welder must be able to layout, fit, and assemble metal components to fabricate structural forms using knowledge of welding techniques, metallurgy, and engineering requirements. Must possess a thorough understanding of the equipment, settings, electricity flow, gas flow, etc. of the welding equipment used in the various welding processes.
The ability to read blueprints
Layout, fit and assemble metal components
Generate welds in the flat and horizontal position. ( A welding test will be part of the selection process)
Proficiency in the areas of stick, MIG, and flux cored welding processes is desirable.
Other duties include assembly operations, CNC plate burning, burn and bevel operation, material handling and miscellaneous equipment operation (saws, drills, shears and brakes)
High school Graduate or GED
Hobart, JVS or other technical school graduate desirable
Class II Certified AWS welder is desirable
Good communication skills
Must be able to work in collaboration with others
Must be able to work an off shift
Must be willing to start as a contract employee and transition to full time employment at a later date.
Nidec Minster Corporation will provide training to those who posses the basic welding skills or those who may have the technical training but lack hands on experience. These positions will be filled initially on a contract basis.
Please go to http://www.minster.com/ to complete an online application.
An Equal Opportunity/Affirmative Action Employer, M/F/D/V
Perform installation and repairs to various forms of process piping such as steam, chilled water, condenser water, air, gas and domestic water. Install and repair steam stations, heat exchangers, steam traps, pumps, valves etc. Perform various fitting and welding tasks such as building platforms, steps, rails, bollards, fences, gates etc.
Perform installation and repairs to various forms of process piping such as steam, chilled water, condenser water, air, gas and domestic water.
Install and repair steam stations, heat exchangers, steam traps, pumps, valves etc.
Perform various fitting and welding tasks such as building platforms, steps, rails, bollards, fences, gates etc.
Select, inspect, use and maintain block and tackle, chain hoists, come-alongs, jacks and tuggers for use in rigging.
Install the appropriate pipe hangers for piping systems and read and interpret pipe support drawings and symbols.
Read and interpret blueprints including plot plans, equipment location plans, P&IDs, structural steel plans, piping ISOs, detail sheets, line indexes, drawing indexes and instrument summaries.
Read and interpret pipefitting standards, codes, and specifications and identify pipe and components according to specifications.
Identify types of pipe, flanges, gaskets and bolts and install pipe sleeves and floor penetrations.
Test piping systems including pretests, serviceflow tests, head pressure tests, hydrostatic tests and steam blow tests.
Prepare base metals for cutting or welding.
Perform oxyfuel cutting tasks including straight line, piercing, bevels, washing and gouging.
Use fit-up gauges and other measuring devices used to align plate and pipe fit-up.
Connect welding current and setup arc welding equipment and clean welds.
Perform air carbon arc cutting and gouging tasks.
Read welding detail drawings and symbols.
Read welding detail drawings including lines, fills, object views and dimensioning.
Preheat metals, maintain interpass temperatures and postweld heat treatment.
Install and maintain steam traps including mechanical, thermostatic and thermodynamic as well as strainers.
Identify and maintain components of condensate return systems. Install and maintain the various types of steam control valves.
Install and maintain flash tanks and related components.
Install and maintain steam and condensate metering devices.
Perform plasma arc cutting tasks including piercing, slotting, squaring and beveling metals.
Perform basic shielded metal arc welding tasks including stringers, weaves, overlapping beads and fillet welds and be able to detect and correct arc blow.
Use gas tungsten arc welding to make multi-pass V-butt open-groove welds with carbon steel filler metal.
Perform shielded metal arc groove welds, open V-butt welds, stainless steel groove welds, and open-root pipe welds.
Perform gas tungsten arc welding on carbon steel, stainless steel, and low-alloy steel pipe.
Identify metals using visual inspection, magnetic testing and sparktesting.
Perform gas metal arc welding including stringer beads, weave beads and multi-pass fillet welds.
Perform flux cored arc welding to make open-root V-groove pipe welds.
Perform flux cored arc welding including stringer beads, weave beads and multi-pass fillet welds.
Review design documents and evaluate compliance to standards and codes.
A broad knowledge of piping systems and structural welding applications.
Conduct job-site inspections to determine compliance to standards and codes.
The above statements describe the general nature and level of work being performed by individuals assigned to this classification.
This is not intended to be an exhaustive list of all responsibilities and duties required of personnel so classified.Duke University is an Affirmative Action/Equal Opportunity Employercommitted to providing employment opportunity without regard to anindividual's age, color, disability, gender, gender expression, genderidentity, genetic information, national origin, race, religion, sex,sexual orientation, or veteran status.
Duke aspires to create a community built on collaboration, innovation,creativity, and belonging. Our collective success depends on the robustexchange of ideas—an exchange that is best when the rich diversity ofour perspectives, backgrounds, and experiences flourishes. To achievethis exchange, it is essential that all members of the community feelsecure and welcome, that the contributions of all individuals arerespected, and that all voices are heard. All members of our communityhave a responsibility to uphold these values.
Essential Physical Job Functions:Certain jobs at Duke University and Duke University Health System mayinclude essential job functions that require specific physical and/ormental abilities. Additional information and provision for requests forreasonable accommodation will be provided by each hiring department.
Work requires an understanding of blueprints and pipefitting and/orwelding normally acquired through a high school education with coursework in skilled crafts or shop. Possess a valid North Carolina driver'slicense.
Work requires four years of experience as a processpiping/fabrication/structural fitter or welder or an equivalentcombination of relevant education and/or experience. ASME or AWSCertification or eligibility required.
Pipeline Specialist - Eunice
Job level commensurate with experience and skill set.The incumbent must coordinate and complete pipeline operations and maintenance tasks and projects in support of plant, pipeline, corrosion, measurement, controls, pipeline maintenance, mechanical maintenance, and project management. Level will be commensurate with experience and skill set. Position may be based out of company's Clay City, KY or Campbellsville, KY facilities.-Perform all phases of mobilizing, operating and maintaining heavy excavation equipment (hydrovac truck, backhoe, track hoe, side boom, dozer, and skid steer) to include excavation frequently on loaded natural gas pipelines.
Operate large truck and trailer hauling equipment required to transport heavy work equipment or project materials to job site.-Daily responsibilities include but are not limited to operating heavy equipment, excavating loaded natural gas pipelines, assisting with pipe replacements, hot tapping and stopple equipment, pigging operations, pipe cleaning (internal and external), pipe fabrication, pipe recoating and hydrostatic testing. Incumbent may be required to lead others, train, develop training, ensure compliance, supply financial input, scope projects and oversee the supervision of contractors and contract workers.
This position also develops work plans and manages contractor construction crews that perform work on Kinder Morgan company assets and facilities.- This position reports to a Pipeline Support Crew Lead to ensure consistency and assurance of work performed in compliance with governmental and company policies and procedures.-Perform coating removal, surface preparation and the application of coating systems including 3M Scotch-Cote 323.-Installation of “Clock-Spring / Armor-Wrap” for repair on loaded pipelines.-Perform excavation observer and spotter tasks.
Perform trouble-shooting and valve maintenance on DOT mainline isolation valves.-Launch, monitor and receive pipeline pigs and develop pipeline pigging plans.-Conduct internal pipeline cleaning or pigging operations utilizing internal pipe cleaning equipment.-Disassemble meter tubes and perform internal meter tube cleaning.-Calibrate and maintain a holiday detector for coating application inspection.-Perform pressure tests of pipelines and fabrications.
Design and review pressure test plans per pipe and material specifications.-Locate and mark pipelines with pipeline locating equipment, probe rods or by hand digging with shovel using drawings and alignment sheets for reference.-Repair pig launcher and receivers, closures and install pig signals.-Repair shorted pipeline casings and install CP test points on pipelines.-Prepare pipelines for full encirclement sleeves for anomaly repairs.-Coordinate pipeline segment replacements including helping develop the HazOp plan.-Evacuate, purge and load pipelines; operate pipeline air-movers to evacuate gas lines during hot work operations.-Operate portable gas compressors and air compressors.-Perform basic acetylene cutting and beveling operations.-Perform duties of a welder helper as needed.
Industry related experience is preferred.- Excavate in-service high pressure pipelines with track hoe.-Operate heavy equipment on difficult and steep terrain-Ability to obtain CDL within 6 months from date of hire. Maintain a valid CDL driver license, and maintain a driving record satisfactory to the company and its insurers-Operate large truck and trailer hauling equipment required to transport heavy work equipment such as tracked excavators and dozers or project materials to job site.Competencies, skills, and abilities:-Must have ability to read and interpret engineering construction blueprints for both pipeline and compressor station projects.-Individual must follow all safety, environmental and regulatory policies so tasks and assignments are completed in a safe and environmentally responsible manner, ensuring proper handling and disposition of hazardous waste.-Knowledge of both OSHA safety regulations and DOT pipeline regulations.
Strong mechanical skills and knowledge of heavy equipment maintenance procedures.-Ability to read and interpret various company policies and procedures, Operations & Maintenance (O&M) manual and blueprints.-Ability to respond in a timely manner to any emergency or after-hours calls.-Good communication skills - must be able to interface effectively with many internal and external customers, regulatory officials, company contacts, co-workers and 3rd party contractors.-Basic computer skills (knowledge of MS Office, operating systems, company software if applicable), trainable to custom software applications.-Basic math skills (addition, subtraction, multiplication, division, fractions, decimals)-Focused on internal and external customer service.-Ability to work with a team, take direction from supervisors with focused attention on details, work rules, and adherence to required project work schedules.-This individual will be responsible for administrative tasks including ordering and receiving required replacement parts, completing personal timesheets and expense accounts, completing and maintaining CMV documentation and maintaining a company vehicle.
- This position requires acting as a company representative when interacting with contractors and vendors.Physical Demands:-Lift, pull, push, and carry up to 50 lbs.-Exert up to 100 lbs. of physical force.-Stand, walk, kneel, bend, and squat for extended periods of time.-Twist head and back for extended periods of time.-Work in areas classified as confined space.-Climb and work from ladders, catwalks, staging, and platforms.-Ascend and descend slopes and ditches.-Work with hands above head, lying on back.-Work in adverse weather and/or extreme temperature conditions.-The individual will be working outdoors, in a pipeline construction type of environmentADA
Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance, mental, or emotional disability.Working Conditions:-Work schedule is Monday through Thursday, ten hours per day and will involve overtime.-Work schedule during construction is Monday through Saturday, ten to twelve hours per day.-This position requires extensive travel and overnight stays are frequent with work away from the reporting location required up to 80% of the time and the ability to respond to call-outs 24/7.The successful candidate will be required to clear a DOT drug screen and a complete background check after an offer has been extended and prior to being employed.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
If a career with an organization that rewards performance and provides a stable and supportive environment for its associates nationwide sounds good to you, Ferguson may just be the place for you. Our people are our biggest asset and share a common passion for customer service, which has helped shape us into the industry leader we are today.
Ferguson is currently seeking the right individual to fill an immediate need for a Fabrication Technician.
As a Fabrication Technician, you will:
Follow all established standard operating procedures for pipe fabrication.
Follow proper procedures for set up and maintenance of machines in the Fab Shop
Accurately measure, record, and add random pipe length
Follow proper procedures for measuring and cutting pipe with band saw and/or torch
Follow proper procedures for rolling and grooving single and double random lengths
Follow proper procedures for threading and beveling of pipe with landis machines
Moving loose and /or bundled pipe from various locations within the pipe yard
Assemble pipe orders whether in single sticks or bundles and maintain work supplies in an organized manner.
Observe necessary safety precautions for fabrications, cutting, assembling, stacking and shipping of pipe for storage and transportation.
Operate powered industrial equipment in accordance with OSHA guidelines and Ferguson safe operating procedures.
Ensure pedestrian safety by maintaining a safe rate of speed in all areas while operating equipment.
Maintain clearance of equipment to avoid impacts and damage to product or property.
Inspect and maintain all forklift equipment in functional condition.
Work closely with supervisor and lead to resolve any task concerns that arise.
Maintain inventory integrity and product safety at all times.
Cross-train on alternate assignments and perform duties in other work areas as needed.
In addition to the essential job functions described above, all associates will perform duties as requested by management.
Possess good oral and written communication skills, and the ability to work both independently and within a team.
Demonstrate superior math skills, ability to calculate quantities of product on hand.
Requires proper training in the use of machines for cutting and threading pipe.
Operate powered industrial equipment according to OSHA Safe Operating Guidelines, Forklift Safety Training, and FEI Safety Policies.
Knowledge of safe work practices required in the pipe yard.
Operation of machinery for the use of cutting and threading pipe according to OSHA regulations and FEI Safety Policies.
Ability to remain results-focused in the fast-paced customer service environment.
As a large, successful company who prides itself on its stability, Ferguson can offer a competitive benefits package which includes the following: medical (two plans to choose from), dental, vision, disability, retirement savings with company match, paid leave (holidays, vacation, sick, personal, and floating holidays), recognition programs, community involvement opportunities, and much more!
- The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability.
REQUISITION ID: 1435req1717
JOB TITLE: FMS Technician
JOB CITY: Long Beach
JOB STATE: California
About TEAM Industrial Services:
Team Industrial Services, Inc. is the worldwide leader in minimizing equipment and asset downtime, providing specialized industrial on-line maintenance, inspection and repair. We provide critical services to our customers that enable them to maintain and operate their facilities and equipment in a safe and productive manner with over 220 locations throughout the world.
At Team, we invest in our employees with the top training and development resources, meeting the needs of the company and the employee. In a constantly evolving industry, Team remains a leader in innovation and service leadership.
TEAM's is a global best in class provider of field machining services to industrial sites and manufacturing facilities. This requires our technicians to align to these expectations. The general duties and major areas of responsibilities of the Field Machining technicians can be broken down into the following stages.
Review of client job scope.
Compliance with all safety procedures and job documentation.
Accountability of job equipment and tooling prior to arriving job site.
Achieve or exceed client quality expectations.
Accomplish or exceed client production expectations.
The Field Machinist is responsible for the set up and operation of a wide variety of portable machine tools to perform on-site machine work and repairs on location at client work sites.
Primary role is to execute field machining operations in accordance with the approved site and company procedures.
The technician is directly responsible for the execution of services in accordance with the requirements of the site and TEAM process and procedures.
The technician undertakes the training and development to continuously improve their skills and levels of competence and knowledge.
Trained and competent technicians will be required to lead technicians of a lesser on job sites.
Essential Job Functions
Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern
Performs all duties as assigned and adheres to TEAM's Core Values.
Performs field machining services on client work sites performing any of the following duties:
Pipe cutting and beveling
Drilling and tapping
Milling motor or pump bases
Metal disintegration bolt removal
Identifies circumstances that necessitate the use of proper safety procedures and equipment.
Documents all field machining service activities as required.
High school diploma or equivalent preferred. Technical school or relevant training preferred.
Three (3) or more years of experience in field machining in an industrial setting required.
Current HAZWOPER training certificate preferred.
0% - 27%
Position is based out of a branch or site location.
Field duties require indoor and outdoor work in a plant atmosphere
Interaction with other crew employees, as well as supervisors and client personnel
Working in plant and/or shop areas around production machinery with extreme noise levels
Must be able to wear safety equipment as required by the safety department for personal protection
May be at more than one job site in a day and must be able to tolerate climate changes
May be required to travel out of town on a periodic basis
Physical and Mental Requirements
Ability to lift and carry 75 pounds
Must be able to walk and climb except when performing non-field duties
Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively
Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations
Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties
Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations
Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells
Ability to maintain focus and multitask effectively
Excellent communication skills
This job description is intended to indicate the kinds of tasks and levels of work difficulty required of the position given this title and shall not be construed as declaring what the specific duties and responsibilities of any particular position shall be. It is not intended to limit or in any way modify the right of management to assign, direct and control the work of employees under supervision. The listing of duties and responsibilities shall not be held to exclude other duties not mentioned that are of similar kind or level of difficulty.
TEAM Industrial Services, Inc. strictly prohibits discrimination against applicants, employees, or any other covered persons because of race, color, religion, creed, national origin or ancestry, ethnicity, sex, gender, age, physical or mental disability, citizenship, past, current or prospective service in the uniformed services, genetic information, or any other characteristic protected under applicable federal, state or local laws.
TEAM's Core Values
Safety First / Quality Always – In everything we do
Integrity – Uncompromising standards of integrity and ethical conduct
Service Leadership – Leading Service Quality, professionalism and responsiveness
Innovation – Supports continuous growth and improvement
Pride and Respect – For our customers, for each other and for all our stakeholders
Teamwork – Global teamwork and collaboration
ITW Grader - 1St Shift
ITW Grader - 1st Shift
Primary Location: Warren, Arkansas
Employment Status: Full-Time
Looking for a better job?
Armstrong Flooring, Inc. in Warren, AR. currently has a Grader positions available on 1st shift. Work week will normally be Monday thru Friday from 6am to 2:30pm with required overtime. The work environment is very fast paced, repetitive, & manual labor in a non-temperature controlled work environment.
Hourly Pay Scale: Start Pay=$15.69; 45 Days=$15.89; 90 Days=$16.04
SUMMARY: Grade flooring according to Grade rules. Separate flooring by grade and mark defects to be cut according to the cutting rules and nest and putty graded pieces onto buggy while producing a grade standard of 5% or less in defects.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following:
Responsible for following Job Safety Analysis guidelines to assure safe operations
Grade flooring according to Product Specification Form (OPS-QA-SP-00051)
Mark defects according to cutting rules
Use correct cutting rules to cut Tavern from First Grade when possible
Separate dark from light colors for variation in color for the finish line
Putty all open character on boards as needed leaving no putty on bevel
Stack graded boards neatly in buggies with all boards butted firmly against each other with no gaps and oriented in the same direction
Remove and place boards back into system for rework in accordance to grade specifications
Move throughout the line to assist other graders as needed
Help in other areas when required
Keep area clean and wood off floor
Help train other graders
Perform other assigned tasks as needed
Successful applicants will meet the following requirements:
Must be able to lift/push/pull up to 10 lbs.
Must be able to pass a drug test, employment verification/background check
Prior production experience in a manufacturing work environment
The following qualifications are strongly desired:
At least 1 year of consistent employment (same employer) within the last 3 years
Positive work history with good attendance
Armstrong is an equal employment opportunity employer. Women, minority, disabled persons and veterans are encouraged to apply.
We invite you to explore the world of Armstrong at:
Armstrong is an Equal Employment Opportunity Employer
About the Location (Warren, AR):
Our Warren Plant manufactures 3/4" prefinished solid oak flooring and employs a multi-cultural workforce of approximately 240 people working multiple shifts.
The city of Warren is located in Bradley County, Arkansas south of Pine Bluff and northeast of El Dorado. Well known in the area is the city's Courthouse Square, 1 of 10 other Warren structures listed on the National Register of Historic Places. The Square plays host to the annual Bradley County Pink Tomato Festival, which celebrates the county's tomato industry.
Equal Opportunity Employer: Armstrong Flooring is an Equal Opportunity Employer M/F/Disabled/Vets.
Nearest Major Market: El Darado
Job Segment: Quality Assurance, Technology
Combo Fitter/ Welder - Journey Level - PDX
Vigor expects all employees to enhance the atmosphere in which they work by living the Vigor Values every day.
Truth: We seek the truth, and we speak the truth
Responsibility: We act on what we know is right
Evolution: We seek mastery, and adapt to a changing world
Love:We care about the people we work with, and the world we live in
As the commercial repair and modernization subsidiary of Vigor Industrial, Vigor Marine brings together eight drydocks, more than 15,000 feet of pier space and tens of thousands of square feet of superior indoor facilities to serve the full scope of vessels of nearly any size. Our multiple facilities and ready-to-work, ready-to-deploy skilled teams mean we make repairs and upgrades with minimum vessel-out-of-service time.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Successfully performs work individually, as a member of a single craft crew, or a multi-craft work crew.
Complies with craft and shipyard safety and environmental measures.
Consistently exceeds JourneyLevel standards.
Works in the shop as a positive addition to the workforce, applying shipboard skills.
Works from ship specifications, work orders and applicable working drawings and blueprints, i.e., form, shape, fit, and weld on vessels.
Researches and suggests solutions to conditions requiring comprehensive condition found reports (CFRs).
Responsible for being conversant in all quality assurance requirements.
Performs burning and effectively uses scarfing tip for clean up, bevel parts, etc.
Performs Arc welding - SMAW, FCAW, GMAW.
Performs carbon arc gouging for weld preparation and cleanup.
Properly cares for and safely uses hand and power tools.
Coordinates the performance and completion of job specifications
Demonstrated ability to do basic shipboard layout.
Complies with craft and shipyard safety and environmental measures.
Installs new and/or affects repairs to ships structure, foundations, structural closures and outfitting items
Cuts, bevels and flushes steel with a Gas/Oxy burning torch
Prepares surfaces by grinding and chipping
Comprehends and understands marine architectural blueprints. Must be able to determine information to fabricate, erect and install ships structures, foundations, structural closures and outfitting items from blueprint.
Tack welds steel and/or aluminum components
Maintains a clean and orderly work area
ESSENTIAL USE OF SENSES
Talking, hearing, vision, depth perception, color vision, field of vision.
ESSENTIAL MENTAL REQUIREMENTS
1.Interaction/communication with others: Frequently- Interacts with others to ensure ongoing safety of operation. May work with several individuals in a confined space.
2.Works alone/independently: Frequently- Works in the presence of other individuals performing duties.
3.Directs/supervises others: Not Required.
4.Repetitive work: Work is similar on a day to day basis.
5.Attention to detail: Must perform all tasks in compliance with regulatory agency standards.
6.Flexibility: May move from one job to another, unexpectedly.
7.Other mental/psychological demands: Works in a noisy environment, and works at heights.
PHYSICAL REQUIREMENTS OF JOB TASKS:
Standing, walking, sitting, lifting, carrying, overhead reaching, all direction reaching, pushing, pulling, twisting, climbing, balancing, bending, crouching, squatting, simple grasping, crawling, and fine manipulation.
EQUIPMENT/TOOLS AND/OR PROTECTIVE CLOTHING REQUIRED TO ACCOMPLISH JOB TASKS:
pneumatic grinder drill press hard hat
shears punch safety glasses
hand drill saber saw hearing protection
hand tools chipping gun respirator
gas/oxy burning torch brake coveralls
hood vent for welding welding equipment buffer
ESSENTIAL MENTAL REQUIREMENTS
Interaction/communication with others: Frequently- Interacts with others to ensure ongoing safety of operation. May work with several individuals in a confined space.
Works alone/independently: Frequently- Works in the presence of other individuals performing duties.
Directs/supervises others: Not Required.
Repetitive work: Work is similar on a day to day basis.
Attention to detail: Must perform all tasks in compliance with regulatory agency standards.
Flexibility: May move from one job to another, unexpectedly.
Other mental/psychological demands: Works in a noisy environment, and works at heights.
ESSENTIAL WORKING CONDITIONS
Works indoors: Frequently- Works indoors exposed to temperature variances, vibrations, humidity, chemicals, dust and noise.
Works outdoors: Frequently- Works on shipboard exposed to typical Oregon weather.
Safety equipment required: Wears welding helmet, long pants, long sleeved shirt, eye protection, hearing protection, respirator, hard hat, and leather shoes.
Other Exposures: Smoke, acids, degreasing cleaners, fumes, free silica, asbestos, dust, weld flash, paints, solvents, oil and grease.
Operation of equipment/tools/vehicles: Uses grinders, hand/power tools, air torches, welding machines, comealong, chainfall, hammer, wedges, wire feeders, compressed gas tanks, plate shears, automatic multihead burning machine, hydraulic press and punch, large and small plate rolls, carbon saw, large surface slab for securing fabrication, overhead and jib cranes and rigging, drill presses and a complete range of handtools.
Required hygiene standards: Per company standards.
MINIMUM TRAINING/EDUCATION REQUIREMENTS:
High School diploma or GED preferred. 5-10 years relevant work experience. Proven skills, work history and/or applicable education will be considered in lieu of work experience.
Some knowledge of several skills with more advanced knowledge of 1 primary skill and possess at least 1 certification (hours in skilled trade & demonstrated proficiency). Requires general supervision during performance of primary skill, but is able to perform job duties of A-1 through A-3 with little or no supervision.
ESSENTIAL CERTIFICATES, LICENSES, REGISTRATIONS
Welder -- Certifiable in 11018, dual shield and SMAW.
Four hour fire watch certification
HAZWOPER- First Responder Awareness Level.
The physical requirements will vary from day to day, assignment to assignment.
Must be able to follow supervisory instructions.
The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. Employees may be required to perform other job-related duties as requested by their supervisor(s).
Must have the ability to perform the essential job duties with or without reasonable accommodation and without posing a direct threat to safety or health of employee or others.
Vigor and its wholly owned subsidiaries provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Vigor complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training..
Pipeline Specialist - Enterprise
The Pipeline Specialist is based out of our Southern Natural Gas (SNG) Enterprise Compressor Station located at 100 County Road 332, Enterprise, Mississippi 39330. Kinder Morgan offers a robust benefits package including medical, dental, vision, life insurance, two retirement plans, paid holidays, and paid time off.
Kinder Morgan is one of the largest energy infrastructure companies in North America.To be considered for our Enterprise, MS Pipeline Specialist job click on Apply Now to sign in or create an account to upload your resume. This is a great opportunity if you are an experienced Pipeline Construction, Heavy Equipment Operator, or have operated Heavy Equipment in the Pipeline Construction or Pipeline Services field.Position Description: The incumbent must coordinate and complete pipeline operations and maintenance tasks and projects in support of plant, pipeline, corrosion, measurement, controls, pipeline maintenance, mechanical maintenance, and project management.
There is weekly travel to and between Southern Natural Gas (SNG) and Tennessee Natural Gas (TNG) locations and pipelines.Perform all phases of mobilizing, operating and maintaining heavy excavation equipment (hydrovac truck, backhoe, track hoe, side boom, dozer, and skid steer) to include excavation frequently on loaded natural gas pipelines.Operate large truck and trailer hauling equipment required to transport heavy work equipment or project materials to job site.Daily responsibilities include but are not limited to operating heavy equipment, excavating loaded natural gas pipelines, assisting with pipe replacements, hot tapping and stopple equipment, pigging operations, pipe cleaning (internal and external), pipe fabrication, pipe recoating and hydrostatic testing. Incumbent may be required to lead others, train, develop training, ensure compliance, supply financial input, scope projects and oversee the supervision of contractors and contract workers.This position also develops work plans and manages contractor construction crews that perform work on Kinder Morgan company assets and facilities.This position reports to a Pipeline Support Crew Lead to ensure consistency and assurance of work performed in compliance with governmental and company policies and procedures.Perform coating removal, surface preparation and the application of coating systems including 3M Scotch-Cote 323.Installation of Clock-Spring / Armor-Wrap for repair on loaded pipelines.Perform excavation observer and spotter tasks.Perform trouble-shooting and valve maintenance on DOT mainline isolation valves.Launch, monitor and receive pipeline pigs and develop pipeline pigging plans.Conduct internal pipeline cleaning or pigging operations utilizing internal pipe cleaning equipment.Disassemble meter tubes and perform internal meter tube cleaning.Calibrate and maintain a holiday detector for coating application inspection.Perform pressure tests of pipelines and fabrications.Design and review pressure test plans per pipe and material specifications.Locate and mark pipelines with pipeline locating equipment, probe rods or by hand digging with shovel using drawings and alignment sheets for reference.Repair pig launcher and receivers, closures and install pig signals.Repair shorted pipeline casings and install CP test points on pipelines.Prepare pipelines for full encirclement sleeves for anomaly repairs.Coordinate pipeline segment replacements including helping develop the HazOp plan.Evacuate, purge and load pipelines; operate pipeline air-movers to evacuate gas lines during hot work operations.Operate portable gas compressors and air compressors.Perform basic acetylene cutting and beveling operations.Perform duties of a welder helper as needed.
Industry related experience is preferred.Experience / Specific
Excavate in-service high pressure pipelines with track hoe.Operate heavy equipment on difficult and steep terrain
Ability to obtain CDL within 6 months from date of hire. Maintain a valid CDL driver license, and maintain a driving record satisfactory to the company and its insurers
Operate large truck and trailer hauling equipment required to transport heavy work equipment such as tracked excavators and dozers or project materials to job site. Competencies, Skills and Abilities:Must have ability to read and interpret engineering construction blueprints for both pipeline and compressor station projects.Individual must follow all safety, environmental and regulatory policies so tasks and assignments are completed in a safe and environmentally responsible manner, ensuring proper handling and disposition of hazardous waste.Knowledge of both OSHA safety regulations and DOT pipeline regulations. -Strong mechanical skills and knowledge of heavy equipment maintenance procedures.Ability to read and interpret various company policies and procedures, Operations & Maintenance (O&M) manual and blueprints.Ability to respond in a timely manner to any emergency or after-hours calls.Good communication skills - must be able to interface effectively with many internal and external customers, regulatory officials, company contacts, co-workers and 3rd party contractors.Basic computer skills (knowledge of MS Office, operating systems, company software if applicable), trainable to custom software applications.Basic math skills (addition, subtraction, multiplication, division, fractions, decimals)Focused on internal and external customer service.Ability to work with a team, take direction from supervisors with focused attention on details, work rules, and adherence to required project work schedules.This individual will be responsible for administrative tasks including ordering and receiving required replacement parts, completing personal timesheets and expense accounts, completing and maintaining CMV documentation and maintaining a company vehicle.This position requires acting as a company representative when interacting with contractors and vendors.
Physical Demands:Lift, pull, push, and carry up to 50 lbs.Exert up to 100 lbs. of physical force.Stand, walk, kneel, bend, and squat for extended periods of time.Twist head and back for extended periods of time.Work in areas classified as confined space.Climb and work from ladders, catwalks, staging, and platforms.Ascend and descend slopes and ditches.Work with hands above head, lying on back.Work in adverse weather and/or extreme temperature conditions.The individual will be working outdoors, in a pipeline construction type of environment ADA
Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance, mental, or emotional disability. Working Conditions:Work schedule is Monday through Thursday, ten hours per day and will involve overtime.Work schedule during construction is Monday through Saturday, ten to twelve hours per day.This position requires extensive travel and overnight stays are frequent with work away from the reporting location required up to 80% of the time and the ability to respond to call-outs 24/7.The successful candidate will be required to clear a DOT drug screen and a complete background check after an offer has been extended and prior to being employed. Job level commensurate with experience and skill set.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!