Bobbin Winder Tender Job Description Sample
High Pressure Plant Tender (Provisional)
Under direct supervision, tends oil, gas or coal fired high-pressure boilers, incinerator furnaces and related equipment, and assists in the maintenance and repair of this equipment; performs related work.
In the Department of Sanitation, under supervision, operates, repairs, alters and maintains boilers, furnaces, pollution control equipment, and other related equipment and appurtenances; performs related work.
Hand fires high-pressure boilers using solid fuels, and stoker equipment and incinerator furnaces using burnable refuse.
Tends and operates stoker equipment, oil-fired-pressure boilers and incinerator furnaces and related equipment.
Assists in the cleaning, inspecting, testing, maintenance and repair of high-pressure boilers, incinerators, auxiliaries and relative equipment.
May operate a motor vehicle.
In the Department of Sanitation, in addition to the duties above, may be assigned to inspect, clean, test, repair, maintain and alter facility equipment; inspect and read meters, gauges and other controls of operating and related equipment; use hand and powered tools and weld and burn in the performance of assigned duties; work from sketches, drawings and blue prints; requisition parts and maintain inventory; keep records and logs; and supervise assigned personnel. May operate a motor vehicle. CONTRACT TITLE High-Pressure Plant Tender FLSA Non-exempt MINIMUM QUALIFICATIONS 1. Two years of full-time satisfactory experience within the last ten years operating and maintaining high pressure boilers or the equivalent marine experience; OR 2. Not less than one year of experience as described in 1 above plus sufficient training of a relevant nature acquired in an approved trade or vocational high school to make up the equivalent of the remaining required experience. Six months of acceptable experience will be credited for each year of approved trade or vocational high school. NOTE: For appointment to certain positions a Motor Vehicle Driver License valid in the State Of New York is required. Such license must be maintained for the duration of such appointment. COMPENSATION $73,080 BENEFITS CUNY offers a comprehensive benefits package to employees and eligible dependents based on job title and classification. Employees are also offered pension and Tax-Deferred Savings Plans. Part-time employees must meet a weekly or semester work hour criteria to be eligible for health benefits. Health benefits are also extended to retirees who meet the eligibility criteria. HOW TO APPLY To apply, go to www.cuny.edu, access the employment page, log in or create a new user account, and search for this vacancy using the Job ID or Title. Select "Apply Now" and provide the requested information. CLOSING DATE January 20, 2018 JOB SEARCH CATEGORY CUNY Job Posting: Support Staff EQUAL EMPLOYMENT OPPORTUNITY CUNY encourages people with disabilities, minorities, veterans and women to apply. At CUNY, Italian Americans are also included among our protected groups. Applicants and employees will not be discriminated against on the basis of any legally protected category, including sexual orientation or gender identity. EEO/AA/Vet/Disability Employer. Job Title: High Pressure Plant Tender (Provisional)
Job ID:* 18046 Location: Lehman College
Full/Part Time:* Full-Time
General Laborer /Mason Tender
The job will include unloading materials, building scaffolding, mixing mortar, construction site cleanup, operating rough terrain forklift and skid loader and other tasks related to masonry construction. The applicant must be able to lift up to 100 pounds, must be able to work outdoors in all weather including summer heat and winter cold.
It is preferable if the applicant has some construction experience but training is available. The job pays $15.00 to $23.00 plus full family healthcare and a pension plan. Assignments can be anywhere in Eastern Iowa and currently the need is in Waterloo.
Winder Operator III
Winder Operator III
Job ID: 4094
Functional Area: MANUFACTUR
Position Type: Full-Time Regular
Relocation Provided: No
Location: GRIFFIN, GA
Education Required: High School or GED Preferred
Experience Required: None
Hours of Work: 12 hour shifts/8a-8p/8p-8a
JOB SUMMARY: Responsible for operation of extrusion equipment; including but not limited to, product quality, following all SOCs, winder flips, box making, core and resin supply constancy. Must comply with all safety, quality, GMPs, productivity and cleanliness standards.
Responsible meeting production and product requirements in accordance with the scheduled work order(s).
Makes boxes and waxes cores to be used to fulfill work order requirements on production line.
Ensure adequate raw material (compound) levels are available to consistently run line.
Performs first piece, periodic and finished roll quality checks: such as, roll weight, width, footage, stretch, core length, packaging and other quality inspections in accordance with Quality Line Report.
When applicable, and directed by work order, complete quality check on every roll.
Assists Production Techs in making changeovers, line thread-up, screen changes and other set-up tasks needed to getting production lines in operation.
Responsible for accurately completing and recording production data on work order paperwork.
All other assignments, general and specific, as directed by Supervision
Responsible for working safely, cleanly and ethically. Follow all plant PPE requirements, safety rules and policies. Reports unsafe conditions to supervisor immediately.
Responsible for maintaining general area housekeeping and recording its completion in the daily cleaning logs.
Responsible for following all GMPs to assure food product safety.
SECONDARY DUTIES AND RESPONSIBILITES: This job description reflects the general details considered necessary to describe the principal functions of the job identified for the purpose of job evaluation.It should not be construed as a detailed description of all work requirements that may be inherent in the job nor shall be construed as giving exclusive title to every function described.
- Although certain positions have specific tasks and responsibilities with respect to food safety, the food safety and quality of all products manufactured by Berry is the responsibility of every Berry employee. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Coil Winder - 1St Shift (Internal Only)
- 1st Shift (Internal Only) atITW
Date Posted: 1/16/2018
Job Description Basic Description: Candidate will be responsible for the winding of all coils and must be able to work and communicate effectively in a team environment. Will also perform assembly work as needed. Essential Functions:
These functions will include winding of all coils, prepping, welding, dip/bake and assembly as needed.
Cross training/rotation on welding and winding within the cell is required on a regular basis.
Work overtime up to 12 hours a day when needed to meet due dates on customer orders.
Willing to work in other areas of your cell and Components Division when necessary.
Position requires ordering material and scheduling order
Must have a high school diploma or equivalent + 1 year of mechanical experience required + 1 year coil winding experience
Must be able to read and understand coil winding data sheets
Possess good hand dexterity
Must be willing to cross-train
Must be able to stand for up to 12 hours
Be able to lift up to 50 lbs
Overtime will be required
Share With https://www.jobs.net/jobs/itw/en-us/job/United-States/Coil-Winder-1st-Shift-Internal-Only/J3R2D36J26SLKYH99JH/Coil Winder
- 1st Shift (Internal Only)
Location: Appleton at https://www.jobs.net/jobs/itw/en-us/search/United-States/location/Wisconsin/Appleton/ , at https://www.jobs.net/jobs/itw/en-us/search/United-States/location/Wisconsin/Appleton/ WI at https://www.jobs.net/jobs/itw/en-us/search/United-States/location/Wisconsin/Appleton/
Experience:At least 1 year(s)
About Us Founded in 1912, ITW is a global industrial company centered on a differentiated and proprietary business model. The company's seven industry leading segments leverage the ITW Business Model to generate solid growth with best-in-class margins and returns in markets where highly innovative, customer focused solutions are required. ITW's 50,000+ dedicated colleagues around the world thrive in our decentralized, entrepreneurial culture. In 2016, the company achieved revenues of $13.6 billion. Interested in learning more about our unique career opportunity? What is a Talent Network? Talent Networks enhance your job search and application process. Whether you choose to apply or just leave your information, we look forward to staying connected with you. Why Join?
Receive alerts with new job opportunities that match your interests
Share job opportunities through Social Media or email Are you looking for a new job? Check out these current opportunities:,,,and ITW is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. Applicants and employees of ITW are protected under Federal law from discrimination on several bases. Follow the link above to read more.
Store Associate - Outlet Winder #339
Our History Nearly a century after opening our doors, Beall's Inc. continues to serve our communities with the spirit of pride and appreciation first shown by Robert M. Beall back in 1915. In 1987, with the start of the Outlet business in retail, his son E.R.Beall decided to open the first Beall’s Outlet in Florida. The concept was a hit and the Outlet division has been growing ever since. Currently within the Beall's Inc. portfolio, there are over 450 Outlet stores and 70 Department Stores that cover 13 states, with sales over a billion dollars annually. The Outlet division conducts business under two different names, Beall’s Outlet within Florida, Georgia and Arizona and Burke’s Outlet for all other locations. Who Are We? We are a convenient and welcoming store where everyone can find the styles and brands they want all at lower prices. We are continually offering fresh assortments of fashion apparel, shoes, accessories and homes goods, making shopping for the family easy, affordable and rewarding. We are the shopping solution for the entire family. More Brands! Big Savings! Our Mission We are a customer-centric, family focused organization with a relentless desire to deliver exceptional value. We want to thrill our customers with an ever changing offering of the latest brands and fashions, in a bright and casual shopping environment, while delivering friendly and consistent customer service. Store Associate A store associate provides the best possible service to our customers on the selling floor resulting in repeat customers and increased sales. To achieve this goal, teamwork will be required among all employees. Certain non-selling tasks must also be completed in order to maintain exceptional customer service. A successful Store Associate will be:
Leader in Customer Service
Demonstrate operational agility
Perform all functions of POS, Receiving and Stock, Housekeeping
Energetic and engaging with internal and external customers
- Able to promote all company programs
High School Diploma or equivalent is required; college degree preferred.
Knowledge of company standard software, systems and procedures.
Excellent communication and interpersonal skills.
Ability to work varying hours and schedules to include days, mid shifts, nights, weekends and holidays.
Occasionally travel to other stores as requested by management.
Must be able to reach a minimum of 60 inches to stock and maintain merchandise.
Must be able to have full body rotation and mobility (i.e., bending, stooping, twisting and reaching) to replenish and maintain merchandise.
Must be able to lift and carry a minimum of 20 pounds (while wearing a provided safety belt) to unload and process merchandise.
Must have full hand and arm usage for operating machines such as POS terminals and ticketing machines.
Must be able to push and pull merchandise fixtures (minimum resistance of 10+ pounds) for presentation and department changes.
Must be able to handle cleaning equipment (vacuum, broom, mop, duster, etc.) used for maintaining cleanliness. External Company Name: Bealls, Inc. External Company URL: https://www.beallsinc.com/
Store Manager Candidate In Winder GA
At Dollar General, our customer is at the center of everything we do! We are a fast-moving Fortune 200 publicly-traded company with more than 14,000 stores and 14 distribution centers in 44 states, growing by hundreds of stores each year. We work in an energetic atmosphere that embraces innovation and teamwork. At Dollar General, you can see a clear and fast path to career growth and success. We are committed to attracting talented and motivated people who can advance our mission of "Serving Others." Let's Grow Together! GENERAL SUMMARY: This position exists primarily for the purpose of developing internal store manager bench from the assistant store manager population, although external candidates will also be in the program. It is a position to be used to give store manager candidates more experience prior to becoming a store manager, and is to be held for a specified period. DUTIES and ESSENTIAL JOB FUNCTIONS:
Assist in recruiting and staffing activities.
Assist with store merchandising by facilitating and/or participating in staging, stocking and storage of merchandise; ensuring that merchandise is presented according to established practices and store manager direction; and properly utilizing merchandise fixtures, signing and pricing of merchandise.
Assist in all aspects of inventory management (including proper execution of damages, markdowns, register scanning, paperwork and facility controls); prepare and conduct inventories.
Follow prescribed ordering practices to ensure the meeting or exceeding of in-stock targets.
Provide superior customer service leadership.
Act as a role model by following company procedures and policies as outlined in the employee handbook, SOP manual and company communications.
Participate in store opening and closing activities.
Ensure the safe deposit of all company funds in the designated bank.
Assist in ensuring the financial integrity of the store through strict cashier accountability, key control and adherence to company security practices and cash control procedures.
Assist in the maintenance of clean, well-stocked stores; provide a safe environment for customers and employees.
Manage store in store manager’s absence.
Review operating statements to identify business trends (including sales, labor, profitability, and inventory turn), expense control opportunities, potential shrink, and errors.
Complete all paperwork and documentation according to guidelines and deadlines. KNOWLEDGE and SKILLS:
Ability to read and interpret documents such as diagrams, safety rules, operating and maintenance instructions, and procedures manuals.
Ability to perform mathematical calculations such as addition, subtraction, multiplication, division, and percentages.
Knowledge of cash handling procedures including cashier accountability and deposit controls.
Ability to learn and perform IBM cash register functions, including those necessary to generate reports.
Knowledge of inventory management and merchandising practices.
Knowledge of cash, facility and safety control policies and practices (deposits, store keys, SAFE and STARS programs, etc.)
Knowledge of recruiting, interviewing, hiring, counseling, and termination practices including legal compliance and internal processes.
Effective oral and written communication skills.
Effective interpersonal skills.
Effective organization skills with attention to detail.
Ability to solve problems and deal with a variety of situations where limited standardization exists. WORK EXPERIENCE and/or EDUCATION:
High school diploma or equivalent strongly preferred.
One year of experience in a retail environment preferred for external candidates; four months experience as a Dollar General assistant store manager required for internal candidates. COMPETENCIES:
Aligns motives, values and beliefs with Dollar General values.
Supports ownership by tapping into the potential of others.
Acts as a liaison between the Store Support Center and store employees.
Fosters cooperation and collaboration.
Interacts tactfully yet directly with employees and maintains an open forum of exchange.
Demonstrates responsiveness and sensitivity to customer needs.
Applies basic principles of retail (i.e., ordering cycles, peak inventories, merchandise flow, etc.).
Provides continuous attention to development of staff.
Recruits, hires and trains qualified applicants to fulfill a store need.
Ensures store compliance to federal labor laws and company policies and procedures. WORKING CONDITIONS and PHYSICAL REQUIREMENTS:
Frequent walking and standing.
Frequent bending, stooping and kneeling to run check out station, stock merchandise and unload trucks.
Frequent handling of merchandise and equipment such as hand-held scanners pricing guns, box cutters, merchandise containers and carts, two-wheel dollies, and U-boats (six-wheel carts).
Frequent and proper lifting of up to 40 pounds; occasional lifting of up to 55 pounds.
Occasional climbing (using ladder).
Occasional driving/providing own transportation to make bank deposits, attend management meetings and to other Dollar General stores.
Fast-paced environment; moderate noise level.
Occasionally exposed to outside weather conditions. Note: This position requires some travel with limited overnight stays Dollar General Corporation is an equal opportunity employer. Requisition ID: 2018-157845 External Company URL: http://www.dollargeneral.com
Coil Winder - Machine Operator 3Rd Shift
Eaton Power Systems Division is seeking a Coil Winder-Machine Operator-3rd shift. The Coil Winder-Machine Operator-3rd shift will be based out of our North Street facility in Waukesha, WI Primary Functions: Set-up and operate winding machine to produce coils, of various size, to specifications called for on winding sheet, winding diagram and order pouch. Coil conductor configurations include strip, round wire and rectangular wire in various combinations. Essential Functions:
Read and interpret winding specification documents to determine characteristics required for specific coil to be wound. Determine coil number, quantity and revision. Record coil number on coil and on labor recording paperwork.
Determine and install appropriate mandrel device on machine. Adjust mandrel, end plates and/or tail-stock as required by window size specification.
Load strip, conductor and insulating paper to DeReeling mechanisms on machine. Measure materials, make adjustments to machine to accommodate material and verify proper alignment.
Places coil form on mandrel, wraps form/mandrel with paper, positions leads and tapes to coil form / mandrel.
Apply pack out as needed per specification. Repeats for each section.
Folds, insulates and tapes weld pre-cut leads to strip stock of coil body. Winds major insulations, and applies varnish with hand applicator. Operates crimp tool to crimp wire to static shield.
Operates machine regulating winding speed with foot control, aligning aluminum or copper strip to center of insulating paper strip and both to center of coil form and adjusts tensioning devices as required.
Inserts oil rib ducts and other special insulating paper at specified places in coil. Weld aluminum and copper leads as required.
Verify proper secondary coil.
Make adjustments to machine (flattener, traverse and material tensions) to yield desired finished coil dimensions as specified.
Operates walkies and hoist equipment
Determine adhesive locations per reference specifications and apply liquid adhesive with hand applicator at specified locations throughout the coil.
Insert cooling ducts, special insulation and component parts at specified locations throughout the coil
Wind coil sections per winding instructions to specified number of turns.
Braze, or bend taps and leads into coil at specified locations throughout the coil.
Position and insulate leads per winding sheet and diagram(s).
Splice material per specifications as required.
Remove coil from mandrel device by hoist and put aside to pallet.
- Performs daily 6S clean up. Qualifications
A high school diploma or GED from an accredited institution is required.
Minimum 1 year of manufacturing experience or military technical training
The ability to work in the United States on an ongoing basis without company sponsorship is required.
- No relocation is being offered for this position. Candidates must reside within the 50 miles of Waukesha, WI in order to be considered
Minimum of 6 months prior coil winding experience
Minimum 3 Years of Manufacturing Experience
Must be able to interpret prints, applicable engineering, safety instructions, maintenance and operating instructions and quality specifications. We make what matters work. Everywhere you look—from the technology and machinery that surrounds us, to the critical services and infrastructure that we depend on every day—you’ll find one thing in common. It all relies on power. That’s why Eaton is dedicated to improving people’s lives and the environment with power management technologies that are more reliable, efficient, safe and sustainable. Because this is what matters. We are confident we can deliver on this promise because of the attributes that our employees embody. We’re ethical, passionate, accountable, efficient, transparent and we’re committed to learning. These values enable us to tackle some of the toughest challenges on the planet, never losing sight of what matters. Job: Manufacturing & Operations Region: North America – US/Puerto Rico Organization: ESSG CPSD PDD Power Delivery Division Job Level: Entry Level Schedule: Full-time Is remote work (i.e. working from home or another Eaton facility) allowed for this position?: No Does this position offer relocation?: No Travel: No Eaton is an Equal Opportunity and Affirmative Action Employer. Eaton is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Job Band : Hiring Manager: William Raymond Atwell HR Rep:
Brentwood, NH NEI The Winder Operator is a key position that works closely with the Winder team and the Coater Operator to produce quality product that meets our customer’s specifications. Required to lead and train other Winder Operators to ensure quality product is produced. A strong knowledge and understanding of each raw material and finished product quality specification and appearance defects, line set up that includes raw materials and finished good specifications for each individual product that is produced.
A solid understanding of all equipment to included box makers, palletizers, line drives, change over’s, packaging, winder control panel along with troubling shooting problems and working with mechanics and electricians to solve any problems. Complete neat and accurate recording of data for necessary paper work in conjunction with roll weights, and roll and pallet counts, tests standards for finished goods. A Solid understanding and continuous awareness and monitoring of finished products and temperatures.
Monitor winder end employees in the area of policies, production and safety procedures to ensure they followed by the all employees working in the winder area. The position reports to: Production Shift Supervisor Overtime Status:
Nonexempt (N) Reports to/Dept: [[oc_deptinfo]] Shift: 12 hour shift Live the Safety standard, adhere to the safety responsibilities. Metrics Implement a personal safety action plan to include LTT and PPE required throughout various tasks and review with supervisor Ensures a safe work environment through strict adherence to OC’s safety policies and procedures while producing and running the winder with controlled power and speed, quality activities and communication with winder operators, batch technicians, coater operators and supervisor. Work as team with other key operators to achieve high standards for Coater operations, safety goals, and quality products Metrics Accurately produces quality product in accordance with work order(s) using proper set up and customer specifications, raw materials and SOP’s:
Ensure safety, set up, and quality specifications are consistent with the policy and effectively communicated to quality techs, coater & winder end employees and production supervisor. Reporting of product(s) that doesn’t conform to the physical or appearance standards and specifications. Monitor all finished goods to ensure proper specification and appearance Troubleshoot problems and work with team members and maintenance to solve problems Train and develop new winder employee(s) to ensure consistency with product specifications, set up and proper job tasks to sustain accurate knowledge and certifications.
Become a technical resource regarding the Coater Operation process and equipment Metrics Utilize Winder Operator technical skills to assist in decision making Identify opportunities around procedures and efficiencies for the winder operation Ensure the injury-free performance of team members Metrics Work in an environment characterized by mutual trust and respect, open and honest communications, teamwork and a passion for winning. Effectively learn change for his / her workgroup while maintaining high levels of engagement. Behaves consistently with desired Owens Corning employee characteristics and competencies Metrics Works closely with the production coater operators, Quality Control and supervisor in a team-based environment that will ensure continuously improving product performance and employee efficiency.
Ensure performance practices are consistent and within site policies and procedure. Job Requirements Experience: High School Diploma with preference for those with further post-secondary education and/or Degree or Diploma.
Three (3) years industrial production experience in a 24/7 continuous manufacturing environment or equivalent. Familiar with working shift schedule. Must be able to work all shifts including nights and weekends when applicable Knowledge and Abilities:
Ability to make decisions based on facts and / or data including algebra and technical skills to analyze data, interpret graphs, and combine related data Ability to effectively communicate to all levels in the organization Ability to work effectively in a team environment as well as effectively communication both within and outside of the organization Ability to apply common sense understanding to carry out detailed and involved instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Ability to work both strategically and hands-on Proficient in Microsoft Office products, including Word, Excel and Outlook along with reading Crystal reports.
Also must have the ability to learn SAP Personal Characteristics: Strong interpersonal skills Must be highly organized and able to adapt to changing demands and priorities. Must be results-oriented and focused on quality products for the customer About Owens Corning Owens Corning (NYSE:
OC) develops, manufactures and markets insulation, roofing, and fiberglass composites. Global in scope and human in scale, the company’s market-leading businesses use their deep expertise in materials, manufacturing and building science to develop products and systems that save energy and improve comfort in commercial and residential buildings. Through its glass reinforcements business, the company makes thousands of products lighter, stronger and more durable.
Ultimately, Owens Corning people and products make the world a better place. Based in Toledo, Ohio, Owens Corning posted 2015 sales of $5.4 billion and employs about 16,000 people in 25 countries. It has been a Fortune 500® company for 62 consecutive years.
For more information, please visit www.owenscorning.com . A career at Owens Corning offers the ability to enhance your expertise and achieve your personal and professional aspirations. Through it all, we’ll empower you with an environment that encourages open communication and big ideas, competitive pay for your performance, comprehensive benefits, and more opportunities to make your impact. Must be eligible to work in the U.S. on a permanent basis.
Owens Corning is an Equal Opportunity, Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or status as an individual with a disability.
Electric Motor Winder
Inspect various kinds of electro-mechanical equipment for damage and evidence of electrical malfunctions.
Test condition of windings according to EASA Standards.
Illustrate and/or document all relevant data specific to unit’s electro-magnetic characteristics, operating conditions, existing damage or intended serviceability.
Dismantle and/or strip damaged or unserviceable electro-mechanical equipment.
Prepare all reusable parts for rewinding and inspect renewed parts for hidden, structural damage or unusual conditions.
Rewind various kinds of electro-mechanical equipment, including but not limited to: single phase, three-phase, dc fields, armatures, wound rotors and transformers. Observe proper insulating techniques and/or requirements during rewinding.
Test rewound electro-mechanical equipment according to EASA Standards and document test results.
Complete required paperwork for each job accurately and on a timely basis.
Operate specialized repair and testing equipment, including but not limited to: winding machines, test panels, surge testers, core-loss testers, cut-off saws, burnout ovens, back ovens, grinders, cranes, forklift trucks, brazing units, dip tanks, VPI systems and various hand-held power and non-power tools.
Observe all safety procedures and policies and use proper protective equipment (especially eye, ear protection and steel toe shoes/boots, gloves, etc.) * Keep work area clean and organized.
Report all injuries, near misses and accidents immediately to a supervisor.
All other duties as assigned. Required Skills
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience is desired.
Certification from a Technical school helpful.
Mechanical aptitude required.
Prior experience working as a Winder desired. An Equal Opportunity Employer, including disabled and vets. Tracking Code: 790-773 Job Location: Augusta, Georgia, United States
Position Type:* Full-Time/Regular
Electric Motor Winder
Brick Staffing is seeking an Electric Motor Winder client in Denver, CO. Candidate must have prior experience rewinding various types of electro-mechanical equipment.
· Inspect various kinds of electro-mechanical equipment for damage and evidence of electrical malfunctions.
· Test condition of windings according to EASA standards.
· Illustrate and/or document all relevant data specific to unit's electro-magnetic characteristics, operating conditions, existing damage, or intended serviceability.
· Dismantle and/or strip damaged or unserviceable electro-mechanical equipment.
· Prepare all reusable parts for rewinding and inspect renewed parts for hidden, structural damage, or unusual conditions.
· Rewind various kinds of electro-mechanical equipment, including, but not limited to: single-phase, three-phase, dc fields, armatures, wound rotors and synchronous fields. Observe proper insulating techniques and/or requirements during rewinding.
· Test rewound electro-mechanical equipment according to EASA standards and document test results.
· Complete required paperwork for each job accurately and on a timely basis.
· Operate specialized repair and testing equipment, including, but not limited to: winding machines, test panels, surge testers, core-loss testers, cut-off saws, burnout ovens, bake ovens, grinders, cranes, forklift trucks, brazing units, dip tanks, VPI systems, and various hand-held power and non-power tools.
· Observe all safety procedures and use proper protective equipment (including safety goggles/glasses, hearing protection, steel-toed boots, etc.).
· Preferred level of education: High school diploma or equivalent.
· Preferred level of experience: 5+ years of relevant experience.
· Mechanical aptitude.
· Ability to work alone or within a team.
· Focused on safety and quality.
· Positive attitude.
· Ability to understand, perform and retain various skill-related training and operation and safety procedures.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!