Bootmaker Hand Job Description Sample
Service Rig Hand
The following essential functions and related job standards have been prepared for the Company's Exclusive use and are not intended as an inclusive listing of any job's responsibilities. These functions and standards may be changed or altered by the Company at any time without notice. The company retains its traditional rights in managing and operating the Company, its facilities, and employees.
General Description of Occupation:
The floor hand is part of a 4-5 person crew who are responsible for performing services on oil wells requested by the customer and specified by the Company. The duties of the Floor Hand include assisting in rigging up/down pulling/laying rods, tubing and casing, and other functions specified by the Operator or other designated individual. All duties are performed in a specified fashion to maximize the safety of the entire crew, along as the oil well being serviced.
Number of Days Worked Each Week: 5-7
Total Hours Worked Each Week Including Breaks: 8-80
Time Allowed for Breaks/ Meals: No formal times established; breaks/meals taken as time permits
Essential Functions of Job:
Rigging up and Down. The floor hands will handle guywire (undo from well service rig, drag to anchor, clamp down), hydraulic jacks, pads/boards, and emergency gear including SCBA boxes, fire extinguishers, and H2S monitor. The floor hand will follow the direction of the Derrick Man and Operator or other designated Company official in performing these duties.
Essential Functions of Job (cont.):
Servicing the Well. Each job will be slightly different, but the floor hands will frequently be required to handle tubing, rods, casing, and associated equipment such as rod strippers, polish rods, etc. The floor hands will operate rod wrenches, tongs, elevators, and associated equipment.
Physical Requirements of Job:
Standing and Walking. The floor hands will be required to stand and move about for extended periods. Virtually all duties performed by the floor hands require standing and / or walking.
Surface Conditions. The floor hands will typically stand /walk on the ground surrounding the well, or on the metal grating of the floor.
Ground conditions can include mud and obstructions. The presence of oil can create slippery conditions on the floor.
Sitting. Sitting will occur when traveling to or between wells ( riding in crew pickup), when break conditions exist, and occasionally when work near ground level occurs ( for example, when putting flange on well head). An estimated 1 hour per day is spent riding in the crew pickup.Manual Handling Tasks (Lifting, Pushing, Pulling, Carrying).
Lifting /Carrying . Listed below are some of the heavier objects you will be required to handle as a Floor Hand. The table below lists the object, the weight of the object, the range of the lift (for example: lift from ground), and whether carrying is required. Because of the nature of oil well service jobs, one job may require you to handle a rod polisher, the next may require you to handle tubing, etc., but all of the objects below are handled routinely as part of your Physical Requirements of Job:
RANGE OF LIFT
Lift from Ground
2-3 person lift and carry
Lift to Shoulder level
2 person lift and carry
Lift to Shoulder level
Mid Chest level
Elevator handled with 1
Hand; very repetitive
Box, 40-80 lb
Lift from ground
2 person lift and carry; 1 hand carry for long distance
Mid Chest level
Carried for long distance
Lift from Ground
1-hand carry for long
Lift from Ground to Shoulder level
Lift from ground to shoulder level
Lift from ground to shoulder level
Tubing (2 7/8")
Lift to shoulder level
Lift from Rack to floor
Lift to shoulder level
Wrapping Wire on Floor
Pulling/ Pushing Objects typically pulled or pushed are listed below, along with the measured force requirements.
OBJECT PULLED/FORCE RQT
Stringing Guywire , 20 lb pull force
Guywire is dragged to the anchor (20 lb pull force), then the wire is pulled taut and clamped
120-130 lb pull force required
Tubing pulled off rack
Other Physically Demanding Tasks. Some additional physically demanding jobs are described below.Rod Wrenches.
When pulling rods, Rod Wrenches are held in each hand. The wrenches each weigh 10 lb. The wrenches are placed on two connected rods and the wrenches are used to uncouple the rods.
To loosen the rods can require a lot of force with the arms, and the task is very repetitive.Laying Tubing Down. When tubing is being pulled, the floor hand will "catch" the tubing as it is released from the elevator, then slide it on the rack and let it drop. Catching the tube requires the floor hand to very suddenly support the weight of the tubing.
Catching the tubing requires both physical strength and skill. Climbing. Routinely climb up / down stairs to work floor; climbing on well during servicing operations may be necessary. Required Postures. The following postures are routinely required when performing floor hand tasks
Shop / Yard Maintenance Duties. Employees shall be required to perform other essential functions while not directly working with the Rig. These may include, lifting, pulling, pushing and carrying differing objects within company owned property.
Job TitleYard HandLocationTowanda, PA, USDivision NameNewpark Mats and Integrated ServicesOverviewNewpark is changing the paradigm in the industries we serve, developing new ways to help customers drive operating efficiencies while working in harmony with the environment and improving community relations. Newpark is headquartered in The Woodlands, Texas, and serves North and South America, Europe, the Middle East, Africa and Asia Pacific.
Newpark provides leading edge matting solutions and worksite construction services to diverse industry segments around the world. Our flagship DURA-BASE® Advanced-Composite Mat System provides a heavy duty working platform for temporary work sites and access roads and is used for many other industry applications.Essential FunctionsAssists with coordination of shipping, receiving. Keeps warehouse clean and clear from safety hazards.
Stocks and stages material daily as they arrive and ship. Receives and stows inbound material and freight. Handles special projects, as assigned.Education & Experience RequirementsHigh School Diploma or educational equivalent.
Entry level. Ability to operate a forklift and maintain a safe driving record. Basic knowledge of applicable products within service area.
Ability to multitask with a wide range of customers both production and drilling. Good customer service skills.Position SummaryAssists with coordination of shipping, receiving. Keeps warehouse clean and clear from safety hazards.
Stocks and stages material daily as they arrive and ship. Receives and stows inbound material and freight. Handles special projects, as assigned.How To ApplyRegister to create an account then search for the vacancy. Click Apply to complete your application online.
We are an equal opportunity employer. Newpark and its affiliates do not discriminate against applicants or employees on the basis of race, color, age, religion, sex (including pregnancy and gender identity), national origin, sexual orientation, disability, military service/veteran status, genetic information, or any other protected status. For more information on Equal Employment Opportunity, please click here.
Newpark Resources, Inc. is committed to ensuring equal employment opportunity, including providing reasonable accommodations to individuals with a disability. Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may contact the Manager, HR Governance & Compliance at HRcompliance@newpark.com.
Production Hand Packager / Finisher
Receive finished product from finishing area; monitor quality of finished product in adherence to product standards; advise supervisor of quality problems
Complete documentation process of product to be shipped
Shrink-wrap (as requested), box and label product according to customer specifications; as required, weigh packaged product to insure adherence to carrier weight limitations
Transport boxed product to assigned area
Complete required carrier paperwork and, as necessary, contact carrier or transportation company for product pick up
Enter order status in order entry system
Generate custom, computerized UPS or express tracking labels/invoices for overseas shipments
Maintain computerized blanket order label inventory and, as indicated, release product for packaging and shipment to customer
Maintain and organize working area and packing supplies
Follow safety procedures and maintain cleanliness of work area
Perform other related duties as assigned
Ability to provide proof of High School Diploma or GED
One year prior experience demonstrating attention to detail and math skills
Good verbal communication skills are necessary for communicating with press operators, coworkers and carriers concerning shipping requirements
Ability to meet physical demands of the job, 50lbs regularly
Ability to complete required certification program
Good math skills including addition, subtraction, multiplication, division, percentages and decimals
Ability to measure accurately using a ruler
Ability to follow packaging/shipping directions
Ability to meet performance standards
Ability to work as a team member to service customers
Good recordkeeping/documentation skills
Attention to detail
Demonstrated record of consistently good attendance/punctuality
Ability to operator a forklift
Occupational Therapist / OT Hand Therapy
HAND THERAPY - OT
Full Time (36+ hrs/wk)
Day / Evening
8:00 AM - 4:30 PM
OT - Occupational Therapist
The Occupational Therapist provides occupational therapy services in an inpatient setting comprised of patients with musculoskeletal, cardiovascular/pulmonary, integumentary and neuromuscular medical conditions/diagnoses and developmental disabilities.
Promotes occupational performance and health, prevents disability by restoring physical and cognitive capabilities and/or using adaptation/compensation through evaluation, planning, intervention/re-evaluation, discharge/follow-up.
Minimum Education Requirements:
Graduate of an accredited college or university of Occupational Therapy with a Bachelor's degree or higher in Occupational Therapy required.
Prior inpatient experience as a student or practicing clinician preferred.
Current licensure or eligibility for licensure to practice Occupational Therapy in the state of Pennsylvania required. Valid CPR certification upon hire or within first 90 days of employment required.
- Important Note: Good Shepherd is a drug free work environment. As a result, candidates selected for employment may be subject to a drug screen test.*
GOOD SHEPHERD'S UNIVERSAL FLU PROGRAM
As a health-care provider, we have a professional and ethical obligation to protect our patients and residents from developing further complications.
To protect our patients and residents, Good Shepherd is now requiring influenza (flu) vaccinations for all Associates, licensed independent practitioners, contracted, agency and temporary employees, students and volunteers.
Good Shepherd is an Equal Employment Opportunity employer and does not discriminate in its hiring or employment practices. All qualified applicants will receive consideration without regard to their race, color, creed, religion, national origin, age, disability, sex, sexual orientation, veteran status or any other characteristic protected by State or Federal law.
Current Employees Click Here to Apply
Return to Search Results
General Plant Spare Hand - New London
If Excellence Drives You, This Is Your Destination.Job Description
Bemis Company currently has General Plant Spare Hand opportunities available at our manufacturing facility in New London, WI.
This is an entry level position with excellent advancement opportunities. Bemis offers an excellent wage and benefit package. Earnings of up to $50,000 in first year based on shift schedule, with top earners in $70,000's based on overtime opportunities. Apply today!
Who we are looking for: This challenging position is perfect for enthusiastic individuals wanting to work in a high performing manufacturing culture.
Qualified applicants will possess good mechanical aptitude, as well as the ability to work a rotating shift schedule of 21 consecutive days followed by 7 consecutive days off. A high school degree and previous manufacturing experience is preferred.
Duties will include:
Responsible for following all plant and department specific safety and security rules, procedures, and programs.
Train and work as a Rewind Assistant, Blown Film Assistant, Coating Assistant, or Press Assistant position as needed for production requirements.
Actively participate and support Continuous Improvements efforts, such as 5S, production improvements, and Safety Teams.
Help in keeping the facility clean and organized.
Physical requirements include:
Must be able to stand/walk continuously
Operate hand and foot controls frequently
Bend /stoop/reach frequently
Lift up to 50lbs frequently
Work in temperatures up to 95 degrees in summer months
Frequently climb 3-4 flights of stairs
Pass entrance physical
Ability to rotate shifts
Bemis is committed to its core values: Ethics, Accountability, Innovation, and Respect. By becoming an employee at Bemis Company, Inc., you will work in a high performing environment where team members collaborate to get the job done, challenge the status quo to find a better way, and embrace unconventional ways of thinking. We are eager to see how you can make an impact in our high performance culture.
Bemis Company, Inc. is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.
Floor Hand - Oklahoma
SPN Well Services provides a complementary suite of drilling, completion and production services, including driling rigs, CATS, coiled tubing, pressure control, electric line, thru tubing, remedial pumping, production tools, and rentals. Offering both individual and packaged services, we support all phases of your well's lifecycle while helping you reduce costs and enhance production. We also offer local leadership, basin-level experience and innovative application of technologies.
The job of the Floorhand is to safely and efficiently perform all manual labor tasks on the drilling rig under the direct supervision of the Driller or, in his absence, the Assistant Driller. This includes the operating of the tongs, slips and pipe spinners to connect and disconnect drill pipe, tubular and drilling bits or tools as well as performing all maintenance of the equipment of the rig. It further includes rig up and rig down procedures, nipple up and down and care of the B.O.P. system, the monitoring and operation of the shakers and when called up to do so, to assist the Derrick Hand within the mud pit, mud pump and chemical sack rooms. The Floorhand is responsible for the housekeeping activities on the drill floor including washing, chipping and painting. When trained, the Floorhand will provide relief for the Derrick hand.
This position reports to the Driller on tour, however, the Floorhand ultimately reports to the Tool Pusher and/or Rig manager on location.
Physical ability to perform medium to heavy manual labor
Ability to read, write and speak English to the extent that they are able to understand verbal and written instructions as well as able to give verbal and written instructions
An understanding and use of the basic management concepts and principles including delegation, motivation, discipline, goal setting and performance evaluation
A thorough knowledge of the oil field service related equipment, materials, terminology and the maintenance of the same
A working knowledge of the purpose, capability and limitations of the equipment associated with their assigned area
Other duties as assigned by supervisor.
Position requires standing, walking, and sitting, while working either indoors or outdoors
While performing this job, the Floorhand will be required to lift and carry, pull/push, reach, squat, kneel and or climb ladders or stairs
Working conditions for this position may involve exposure to varying environmental conditions. This may include chemicals, gases, cold/heat, noise, dampness, dust, fumes, radiation and heights. Exposure to the above conditions should be handled as prescribed in the Felderhoff Drillings HSE Handbook and/or the Felderhoff Drillings Standard Operating Procedures
Other requirements include mental, physical and manual dexterity, hand/grip strength, depth perception and any other physical attributes that enable the employee to perform the job safely according to all Company, Local, State and Federal regulations and requirements
This position requires the ability and willingness to wear the following personal protective equipment and/or safety equipment to including, but not limited to; safety glasses, face shields, goggles, ear muffs/plugs, steel toe boots, hard hat, full body harness with applicable fall protection devices, SCBA (Self Contained Breathing Apparatus), H2S detectors, slicker or TYVEK chemical suit and gloves, FRC (Fire Retardant Clothing)
Passing the company's drug screening process
Passing the Company's background check
Excellent Benefits: Medical, Dental, Vision, Disability, Life, Matching 401(k), Employee Stock Purchase Pla
This job description indicates the general nature and level of work expected of the incumbent. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the incumbent. Incumbent may, and probably will, be asked to perform other duties as required. Each employee, regardless of classification, is required to maintain a safe, orderly and clean workplace, using safety precautions and observing safety rules at all times.
Superior Energy Services and its subsidiaries are Equal Opportunity and Affirmative Action Employers for Minorities/Women/Veterans/Disabled.
Advanced Hand Solder - All Shifts
Build through-hole (THT) and surface mount (SMT) printed circuit board assemblies, placing components on boards per controlled parts lists, drawing documentation and quality workmanship guidelines.
Hand-solder THT components per specifications
Operate equipment such as, aqueous cleaner and component location equipment.
Assist, as required, with the operation of wave solder or selective solder machines.
Wire and solder prototypes and other complex assemblies of unique or unusual design per applicable specifications.
Cut and form (prep) components
Perform manual placement of THT components
Assemble chassis components using a variety of hardware
Assemble electromechanical devices using a variety of hardware
Recommend changes in documentation to ensure high quality results
Perform other assignments as required
Work under limited supervision
May receive direction from group leader
Skills & Qualifications
Basic soldering skills. (THT Class 2)
Basic component identification skills - (THT and some SMT)
Ability to perform simple task utilizing work instructions and production drawings.
Ability to perform component prep using hand tools, tooling, and some automatic equipment
Regular use of vision to see objects at close range with occasional depth perception to objects where and as they actually are and adjustment of lens of eye to see objects in sharp focus at varying close distances. Microscope work required
Color vision required
Ability to assemble simple electronic assemblies
High School diploma
Two years of printed circuit board assembly experience preferred
11616 East 51st Street
Tulsa, Oklahoma, 74146
Tower Hand Apprentice - Columbia, SC
Goodman Networks offers a complete family of solutions towireless carriers, OEMs, backhaul service providers, and enterprise customers.Additionally, our Field Services division is a valued partner of DIRECTVdelivering high quality service installations,maintenance, and upgrades for residential and commercial customers. Solutionsand services offered by Goodman Networks help these entities implement newtechnologies faster, enhance network performance, and improve business results.
This is an entry-level tower climberposition to perform work on towers and rooftops.
You will receive training to:
Be a competent climber
Perform controlled descents
Use aerial lifts
Work on tower platforms
Mount and cable equipment
Perform cable, fiber and systemtesting
Troubleshoot and repair antenna systems
You will gain an understanding of thelatest wireless technologies.
You will gain the followingcertifications: Tower Climber, FirstAid/CPR, Donlen Driving, OSHA-10, Aerial Lift
Mayperform installs and removals of radios, antennas, and associated RF equipment
Troubleshoots Alarms / RSSI issues at sites using supplied sweep gear.
Performelectrical down tilts and mechanical down tilts to a variety of antennas usingsupplied antenna controller units.
Runjumpers as needed to complete ongoing scopes of work.
Maydevise jumper connections with knowledge from connector training.
Completerequired equipment and supply paperwork.
Climbing communicationsstructures, to include guyed; self-supporting; monopoles; building/rooftops;grain silos; etc.
Performing audits: safety;defect and quality.
Ability to follow daily instructions.
Ability to run jumpers as needed to completeongoing scopes of work.
Fill out required paperwork and printouts.
Applies job skillsand company policies and procedures to complete assigned task
Goodman Networks considers applicants for all positionswithout regard to race, color, religion, creed, gender, national origin, age,disability, genetic information, marital or veteran status, or any otherlegally protected status.
Recommended Minimum Job Requirements:
HighSchool Diploma or equivalent
Validstate-issued driver's license is required
Recommended Knowledge, Skills and Abilities:
Knowledgeof standard knots
Useof hand tools to mount equipment, run and connect cables, and secure climbers.
Knowledge of basic electricity,grounding, and power safety.
Trainingin a technical background the requires reading and applying diagrams andtechnical information
Ability towork closely with others
Travelas required, typically within a designated region
Not afraid of high elevations
Must be ableto climb and descend all types of tower and rooftop structures up to 400 feet
Must be ableto lift 75 lbs.
Must be ableto travel as needed
Must bewilling to work in challenging environmental conditions – higher/lower seasonaltemperatures, humidity, wind, precipitation.
This position requires good physical conditioning tosustainably carry/lift/move heavy objects throughout the workday.
Apply by emailing your resume TalentAcquisition@goodmannetworks.com
Certified Hand Therapist ( OT Or PT) - Outpatient San Rafael, CA
Select Physical Therapy in Mill Valley, CA is seeking a full or part time hand therapist for our outpatient center. An ideal candidate is a licensed physical or occupational therapist ready to expand our hand therapy program. You do not need to be a certified hand therapist (CHT) to be considered but you MUST possess solid splinting skills and comfortable as a lead physical or occupational hand therapist. We have multiple clinicians on staff in San Rafael and continue to grow with referral sources on site. We have a great team in the north Bay and looking for a dynamic hand therapist to join. We are the largest provider of outpatient rehabilitation in the country, locally managed by treating therapists.
Why join our nationwide team of amazing hand therapists?
UNMATCHED continuing education program with CEU accrediting courses focused on hand therapy including our national UE symposium, journal clubs, webinar training and more.
Company paid CHT certification that includes exam prep along with a manual therapy certification of the upper limb all PAID by company.
National network of over 300 hand therapists
Hand team meetings in each local area and virtual meetings and training available.
Opportunities to observe and interact with our referring physicians to provide the best in patient care
Large national company with the supplies, resources and stability you need to focus on treating and increasing your skills.
Affordable PPO plans for full time clinicians (32hr+), multiple plans to choose from
Company matching 401(k)
Generous paid time off PLUS holidays
Competitive salary with additional incentives and more
To learn more about us, contact our regional recruiter Shanel Green at 610-223-5944 or firstname.lastname@example.org
Regional Recruiter Outpatient Division
Select Physical Therapy
Select Physical Therapy is a part of Select Medical Corporation's Outpatient Division is a nationally prominent, locally driven provider of outpatient physical rehabilitation with approximately 1600 locations in 37 states, including the District of Columbia. Throughout the country we operate primarily as Select Physical Therapy, NovaCare Rehabilitation, Physio, Kessler Rehabilitation Center, KORT, Saco Bay Physical Therapy, Concentra, SSM Physical Therapy and Keystone Physical Therapy. Our highly respected clinical team provides preventative and rehabilitative services that maximize functionality and promote well-being. We develop individualized treatment plans to help achieve each patient's specific goals. Our integrated local market network allows us to effectively partner with physicians, employers, payors and case managers to achieve optimal patient outcomes in a cost-effective manner. We also provide physical therapy and athletic training services to professional sports teams, colleges, universities and high schools. #ACN
Responsible for the evaluation, plan of care, treatment, re-evaluation, discharge, and appropriate communications of high quality hand therapy services to patients and customers.
Develop treatment plans, supervise assistants and aides, contribute to case management, and provide quality patient care.
Maintain positive level of interaction with facilities and clients. Enhance and expand client relations with facilities and their staff.
Must be a graduate of an accredited school for Occupational or Physical Therapy.
Must hold specialty certification or licensure in Hand Therapy.
National registration and state licensure or registration REQUIRED.
MUST have solid experience in application of custom splinting pre and post-op orthopedic required.
Minimum two years in adult rehabilitation
Hand and splinting experience REQUIRED.
Cardio-Pulmonary Resuscitation (CPR) certification.
Valid state driver's license.
Hand Surgeon Physician Albuquerque, NM Consultant
Concentra, one of the largest health care companies in the nation, is looking for a hand surgeon to provide specialist services to our team. Concentra Advanced Specialists assist in the management of medically complex patients, expedite return to work and functional restoration.
Working collaboratively with medical and therapy providers, you will provide specialist services, both non-surgical and surgical, for orthopedic and neuromusculoskeletal work related injuries. In addition, you will communicate with employers and take an active role in the case management. The treatments you provide will make a tremendous difference in the lives of those who look to us for care and comfort.
Half a day per week or biweekly
Flexible scheduling with consideration of your private practice
Preferred experience in treating patients with work related injuries.Licensure requirements of the state of practice
Graduate of accredited MD or DO program of accredited university
Unrestricted DEA license for state of jurisdiction
Board Certification Hand Surgery
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!