Brazing Machine Operator Job Description Sample
Heat Treated And Brazing Furnace Operator
Aerojet Rocketdyne is a world-recognized aerospace and defense leader providing propulsion and energetics to its space, missile defense, strategic, tactical missile and armaments customers throughout domestic and international markets. We are seeking a
Heat Treating and Brazing Furnace Operator for our Canoga Park, CA facility to work either the 1st or 2nd shift. This is a Union position.
Set up and operation of Heat treating and controlled atmospheric brazing furnaces to braze rocket engine thrust chambers and other assemblies where vacuum, explosive and/or inert gas atmospheres are used in production. Essential Job Functions (Including % of Time for Each) 100%- Plan brazing and/or heat treat operations of developmental, prototype and production assemblies in controlled atmospheric brazing furnaces where explosive and inert gasses are used in the atmospheres. Set power and temperature controls, gas flow panels and instrumentation for electric or gas fired furnaces. Adjust switches on temperature control instruments for multiple cycle brazing.
Load assemblies on furnace base and make hookups of thermocouples and pressure lines as required.
Operate auxiliary power equipment to unload furnaces and cool down with cooling muffles. Perform heat treating and/or brazing operation as required.
Operate furnace to heat treat and/or braze assemblies including leak check and purge, instrumentation, heat-up, braze and cool down. Take action when emergency conditions arise during phases of operations to assure safety of personnel and equipment. Over-ride furnace controls by manual operation when necessary.
Requirements High school diploma or equivalent and five (5) years of experience in heat treating and brazing operations.
Demonstrated experience working with and around hazardous chemicals including acids.
Must have a proven safety record and experience with PPE used with hazardous chemicals.
Experience handling large (500 lbs +) complex hardware with tooling and other handling devices (ie: pallet jacks, cranes, lifting straps, etc).
Experience reading, comprehending and using planning and drawings to meet required specification requirements.
Experience using measurement instruments to ensure parts are set-up and indicated properly to meet requirements.
Must carry or obtain applicable certifications to work in an environmentally controlled room.
- Must pass the written and practical exam required for Heat Treated and Brazing Furnace Operator. US Citizenship required. Must also be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement. Work Environment and Physical
The work environment may require a combination of indoor and outdoor activity (hot, cold, wet, humid conditions) with a varied amount of walking, standing, sitting, climbing (i.e. ladders, stair, scaffolding, ramps), balance (maintaining body equilibrium to prevent falling when walking, standing, or crouching on narrow, slippery, or erratically moving surfaces), bending, reaching, handling/fingering (seizing, holding, grasping, turning picking, pinching), stooping, kneeling, crouching and ability to lift/carry/push/pull up to 50 pounds. Work may require the ability to operate material handling equipment (forklift, crane, hoist, man lift, etc.) in a safe manner. While performing the duties of this job, employees may work around variable noise levels or with fume or airborne particles, hazardous chemicals, etc. requiring the use of personal protective equipment such as face protection (safety glasses, goggles, face shield), foot protection (i.e. steel toed shoes, rubber boots, etc.), gloves, hard hat, shop coat and hearing protection.
Some positions may require Respirator clearance up to and including the Self Contained Breathing Apparatus (SCBA) Level A clearance. Work requires the ability to change into or out of personal protective equipment when entering or exiting manufacturing, laboratory, or other areas. Some employees may be required to drive between various locations within the Company facility or between locations.
Work duties may also be required to work in a standard office setting and to use standard office equipment, including a computer and/or the ability to travel by air or auto. Ability to distinguish colors may also be necessary. This position may be expected to work varying shifts and hours to ensure successful operation of activities in the organization. Need help finding the right job? We can recommend jobs specifically for you!
We consider the consistent demonstration of positive, cooperative, self-motivated, courteous and professional behavior to be an essential function of every position. While different positions have different primary areas of responsibility and technical expertise, everyone needs to work as a team, and we expect all employees to contribute as necessary to get the job done. Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S.
Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Equal Opportunity Employer/Minorities/Females/Veterans/Disability.
Individuals with a disability requiring accommodation during the application and/or theinterview process should e-mail the Human Resources Department at
CategoryManufacturing and Production - Other
Heat Treated And Brazing Furnace Operator
Aerojet Rocketdyne is a world-recognized aerospace and defense leader providing propulsion and energetics to its space, missile defense, strategic, tactical missile and armaments customers throughout domestic and international markets. We are seeking a Heat Treating and Brazing Furnace Operator for our Canoga Park, CA facility to work either the 1st or 2nd shift.
This is a Union position. Set up and operation of Heat treating and controlled atmospheric brazing furnaces to braze rocket engine thrust chambers and other assemblies where vacuum, explosive and/or inert gas atmospheres are used in production. 100%- Plan brazing and/or heat treat operations of developmental, prototype
Spot Welding Brazing
spot welding brazing
cut, bend. clamping, tacking and shape metal
$16 an hour
direct hire with benefits; 401K
Location: North Hollywood, Ca.
Reading View. Press Alt Shift A for accessibility help.
Requires the finish-forming, measuring and scribing, trimming, fitting, aligning, assembling and setting-up of sheet, tubular, machined or formed parts preparatory to welding and the straightening and aligning of warped assemblies and parts after welding.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Include the following and all other duties as may be assigned. Individuals must be able to perform each essential duty satisfactorily.
1. Performs such typical operations as assembling prefabricated parts into welding jigs or fixtures to blueprint dimensions.
2. Assembles parts preparatory to welding by fitting, filing, deburring, trimming to scribe lines, grinding; straightens and aligns them after welding.
3. Assemblies made require some correction for stress and distortion.
4. Sets up and operates all grinding equipment, expanders, and large and small band saws, hand plannish sheet metal parts.
5. Determines shrink allowances in order to compensate for this condition.
6. Checks planning sequence of work operations and submits any corrections or suggestions to the Foreman for approval.
7. Holds parts in place by spot welding, clamping, bonding or machine tacking.
8. Performs rework, repair and other associated operations in connection with the work described.
EDUCATION AND/OR EXPERIENCE
Must be able to read and work from blueprints and use precision measuring instruments such as micrometers, scales and Vernier calipers.
TYPICAL MATERIALS, TOOLS and EQUIPMENT USED
Materials worked on: Ferrous and non-ferrous metals and their alloys in the form of sheet, castings, forging, and extrusions, tubular stock machined, and formed parts.
Materials worked with: Emery cloth.
Tools used: Hand tools, scales, router jigs, measuring instruments, hand snips, templates, jigs and fixtures, mandrels, dollies, bumpers, check fixtures, etc. Must have, at all times, complete set of personal tools adequate to perform the work covered by the job classification.
Equipment used: Heating torches, goggles, drill presses, grinding wheels, presses, hand drills, clamps, vises, nibbling machines, etc.
Senior Aerospace is an AA/EEO Employer ∙ Minorities/Women/Veterans/Disable
Work 22, a Los Angeles, Ca.-based employment agency, recruites candidates for both direct hire and temp to hire Southern California jobs and nationwide searches in the following fields: manufacturing, engineering, aerospace, warehouse, and office. This is a free service for job seekers.
Technician, Brazing Lead
Primary Responsibilities Internal deadline to apply of January 19th, 2018 Perform in-line and repair brazing on products and components in accordance with established standards. Perform electro-mechanical assembly and testing of TSD HVAC products Tasks Performed * Obtain and maintain brazing certification in accordance with the AWS standard.
Perform brazing of piping sub-assemblies in accordance with company procedures and quality/productivity standards.
Obtain and maintain EPA Section 608 Level II certification.
Perform “in-line” brazing of production units to complete, in accordance with AWS standard, hermetic piping installation of HVAC unit, in accordance with company procedures and quality/productivity standards. Includes coil, compressor and accumulator brazing and pipe and piping sub-assembly brazing installation.
Support and provide assistance with on-the-job training to help assure HVAC Brazing Technicians are properly trained and are performing brazing techniques in accordance with Company specifications.
Inspect other brazers’ work for compliance to requirements.
Perform brazing for repair and in-factory service of HVAC units.
Perform verification and inspection for completed units, and in-line brazed components by operating measurement devices and visual checking. Identify and correct defects appropriately. Essential Functions * Perform verification and inspection for completed units, and in-line brazed components by operating measurement devices and visual checking. Identify and correct defects appropriately.
Perform testing of HVAC units, for both repair and new production.
Read and conceptualize technical drawings, mechanical blueprints, electrical schematics, and bills of materials to complete sub-assemblies and in-line brazing.
Perform refrigerant related tasks such as measuring, charging, and evacuating HVAC units, for both repair and new production.
Complete electro-mechanical assembly of HVAC products according to drawings, bills of materials, procedures, check sheets, and other work instructions, for both repair and new production.
Use various hand and power tools correctly and safely to assemble sub-assemblies and products.
Read and understand technical drawings, mechanical blueprints, electrical schematics, and bills of materials to complete electro-mechanical sub-assemblies and brazed subassemblies.
Perform verification and inspection of electro-mechanical subassemblies and brazed sub assemblies. Identify and correct defects appropriately.
Complete process check sheets, daily production sheets and other daily reporting and paperwork according to company procedures Minimum Physical Requirements * Ability to mentally picture and work on sub assemblies’ installation in HVAC unit (in-line brazing) while working in tight locations, making brazed connections other than purely vertical or horizontal, while view is partially obstructed.
Ability to safely and correctly use hand and power tools and measurement devices.
Ability to lift up to 50 pounds on a regular basis.
Ability to read, write and follow instructions.
Ability to judge the quality of sub-assemblies and assemblies produced compared to established standards, drawings, and instructions.
Ability to read and understand technical drawings, mechanical blueprints, electrical schematics, and bills of materials.
Ability to operate powered equipment, such as fork truck and overhead crane.
Ability to stand, sit, crawl, squat, kneel, twist, bend, and reach above the shoulders as required to perform essential job functions.
Excellent visual acuity and manual dexterity for timely completion of brazed connections with proper speed and method (as trained to) resulting in proper brazed connections while working at production pace.
Ability to travel domestic and international for training. Desired Education High School Desired Degree High School / GED Desired Job Experience * High School or GED and additional courses in related field, plus minimum 5 years brazing / HVAC experience, or equivalent education and experience.
Applicable safety/operations training required to operate certain machinery and equipment (e.g., fork truck, crane).
Developed knowledge of HVAC systems as obtained through successful completion of technical training courses to obtain EPA 608C Level II certification.
Developed brazing skills as demonstrated by obtaining brazing certification in accordance with the Company AWS program.
Broad knowledge to obtain and maintain clearance for in-line and sub-assembly brazing activities per company training requirements.
Developed mechanical skills as demonstrated by the proper use of hand and power tools.
Developed electrical skills as demonstrated by proper wiring and assembly techniques.
General computer skills with emphasis on MS Office products. Position: Technician, Brazing Lead
Req Code:* 1603 Location: Warrendale PA
Full Time:* Yes
Welding, Soldering Or Brazing Worker
Machine Operator - Blade Machine - Operator
Baumer of America is the leading Machine Engineering company for the Foam Industry in America. We offer our employees competitive compensation, benefits and a positive company environment.
We are seeking a MACHINE OPERATOR for our Blade Room to join our team at our facility located in Towaco, NJ! You will help oversee operational activities and ensure excellent quality control.
- Oversee and coordinate plant operations and activities
- Troubleshoot and resolve issues in a timely fashion
- Load and unload equipment and materials
- Provide innovative solutions to improve plant efficiency
- Conduct routine preventive maintenance on the plant
- Log and record readings for equipment and procedures
- 1-3 Years previous experience in plant operations or other related fields
- Familiarity with plant tools and equipment
- Ability to work with standard and metric systems
- Strong troubleshooting and critical thinking skills
- Ability to handle physical workload
- Ability to thrive in a fast-paced environment
- Fluent (oral and written) in English
- Ability to work independently as well as part of a team
Product Line Leader, Brazing Solutions
Product Line Leader, Brazing Solutions Driving Infinite Possibilities Within A Diversified, Global Organization A key area for growth of our business aligns to our global Breakthrough Initiatives (BTI) – initiatives that haven’t traditionally been “core” to our business but are now being driven to deliver “breakthrough growth. One of the areas of focus is Brazing Solutions. We are seeking an experienced, customer-focused, entrepreneurial individual who will provide the leadership required for the Breakthrough Initiative Product Line Leader for Brazing Solutions. This is a leadership position responsible for executing global growth of product offerings. In this role, you will be responsible for expanding the portfolio of product offerings, marketing strategy, sales promotion programs, channel strategy, pricing, competitive analysis, and marketing communication strategy. 35 Manage strategic marketing activities 35 Define marketing and business development strategies aligned to the strategic plan 30 Define and implement strategy & value proposition
YOU MUST HAVE:
- Bachelor's Degree in Business or Engineering.
Substantial experience as a marketer of welding, brazing, fluxes, or paint products.
Proven ability to manage change.
Proven business acumen in driving growth of “startup” or “ground floor” businesses + Strong ability to manage through influence + Excellent verbal/written/presentation skills + Ability to communicate and collaborate with executive management levels internally and externally + Demonstrated experience in conflict management + Experienced in the use of CRM tools and Strategic Selling methodologies such as "Value Based Selling" + Ability and willingness to travel internationally Exempt Performance Materials and Technologies
- Continued Professional Development + Extensive Travel Required
Job ID: req126759
Location: 115 Tabor Road, Morris Plains, NJ 07950 USA Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. For more information on applicable equal employment regulations, refer to the EEO is the Law poster . Please refer to the EEO is the Law Supplement Poster & the Pay Transparency Policy . If a disability prevents you from applying for a job through our website, request assistance here . No other requests will be acknowledged. Terms & Conditions | Privacy Statement © 2017 Honeywell International Inc.
• Mechanically inclined-Maintenance and mechanical experience for machinery and automotive.
• Entry Level Brazing & Electrical experience. Experience working in a fast paced manufacturing & production environment.
•Good with manual dexterity and capable of using a variety of manufacturing tools
• Ability to use hand and power tools.
• Ability to read and understand blue prints and work orders.
• Experience running and operating grinding industrial machinery. Can work with various tolerances.
• Ability to perform manual off sets, good time-management skills, good troubleshooting on know-how to quickly determine problems and solutions.
• Experience center less grinding, Bandsaws, and entry level CNC Lathe-Mill
• Quality inspection of parts- ability to use all measuring tools; gages, micrometers, calipers, scales etc
• Able to work alone or in a team environment.
Machine Operator & Painter (Cnc Machine Operator)
Job Description 2nd Shift, Painter & Hardware Machine Operator - Be intricate with cutting metal parts for construction of machines. The parts will include joints, pipes, frames, etc.
Experience in painting is a MUST as this person must be able to intricately tape and paint the machine parts. Paint must not drip, so the candidate must be an experienced painter. Candidate must have attention to detail, quality assurance, and safety.
This is a developmental role. Candidate MUST be reliable. If interested please email email@example.com or call 301-588-9729
? At Kelly Services ® , we work with the best. Our clients include 95 of the Fortune 100 ™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly.
® As a workforce advocate for over 70 years, we are proud to directly employ nearly 500,000 people around the world and have a role in connecting thousands more with work through our global network of talent suppliers and partners. Revenue in 2016 was $5.3 billion.
Visit kellyservices.com and connect with us on Facebook , LinkedIn and Twitter . Kelly Services is an equal opportunity employer including, but not limited to, Minorities, Females, Individuals with Disabilities, Protected Veterans, Sexual Orientation, Gender Identity and is committed to employing a diverse workforce. Equal Employment Opportunity is The Law. at https://www.dol.gov/ofccp/regs/compliance/posters/ofccpost.htm
CNC Machine Operator & CNC Machine Programmer
Company seeking experienced an CNC machine operator and a CNC machine programmer with at least 2 years experience as an CNC operator and also 2 years experience as a CNC Programmer. Pay DOE.
Will be a fulltime job with hours 8-5 Monday - Friday with 1 hours for lunch. Pay DOE. To find out how to apply to this opportunity please call Workforce Solutions Staff at 1-800-457-5633 or 325-795-4200 and have it added to your "Interested List". Your name will also be placed on the employer's contact list.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!