Bulk Station Operator Job Description Sample
Operator - Equipment Operations - Bulk Handling
Primary Purpose:Safely operate various types of equipment related to movement and transporting of bulk products as dictated by customer needs and requirements. Essential duties and responsibilities:Operation of equipment which includes, but is not limited to: Pay loaders, E-Crane, Krupp Stacker/Reclaimer, D-9 and D-10 dozers, Bruks Ship loader, and CBUL.Perform all functions of terminal operations as directed by the Shift Supervisor or Plant Coordinator consistent with standard operating procedures and federal, state, and local regulations.Perform routine inspections and maintenance on assigned equipment and report findings in accordance with policy and procedure.Perform all functions in a timely, efficient, and cost effective manner.Participate in and successfully complete required training and related testing.Actively participate in and promote our Safety, Quality, and Environmental Compliance (SQE) culture.Comply with Federal, OSHA, EPA, and Company regulations, policies, and procedures.Communicate effectively and professionally with supervisors, coworkers, and customers.Ensure assigned equipment and terminal housekeeping is conducted as required.All other duties as assigned.
Education:High School Diploma or GED equivalent. Experience/specific knowledge:Experience in equipment operations and bulk handling facility.
Certifications, licenses, and registrations:Ability to obtain a TWIC (Transportation Worker Identification Credential) as issued by TSA (Transportation Security Administration). Competencies, skills, and abilities:Ability to effectively communicate, orally (face to face and by telephone) and in writing, in English with coworkers, contractors, government officials, and Senior Management.Ability to read and understand written material (in English), including use and understanding of basic numerical calculations, safety rules and operations instructional guides and procedure manual.Ability to write routine reports and correspondence.Must have basic math skills; ability to add, subtract, multiply, and divide in all units of measure.Ability to read and interpret documents. Physical demands:Must be able to sit, stand, and walk for extended periods of time.Must be able to lift and/or move up to 50 pounds.Must be willing to work in protected areas at heights up to 45 feet above ground.Must be able to reach, climb, stoop, kneel, crouch, and crawl.Must be able to hear and smell for deficiencies or hazards.Must be able to pass a respiratory fit test. Working conditions:Must be able to work in all weather conditions.Must be willing to work all shifts, overtime, weekends, and holidays as needed as required.Must be able to respond to call-out as assigned.Must be able to work over water (dock).Must be able to work with a team, take direction from supervisor, keep required work schedule, focus on attention to details, and follow work rules. Preferred education, experience, competencies, skills and abilities:Prior bulk terminal experience preferred.Prior heavy equipment experience preferred.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Bulk Line Operator
Ecolab, the leading global developer of premium cleaning, sanitizing and maintenance products and services for the hospitality, institutional and industrial markets is seeking a Bulk Line Operator who will be responsible for manufacturing or assisting in the manufacturing of all products according to standard formula following all applicable instructions and current standard operating procedures.
What's in it For You:
Opportunity for a long term career path
Access to best in class resources, tools, and technology
Thrive in a company that values sustainability, drives a safety-focused culture and has been recognized as one of the most ethical companies in the world
Comprehensive benefits package starting day 1 of employment- medical, dental, vision, matching 401k, company paid pension, stock purchase plan, tuition reimbursement and more!
What You Will Do:
Accountable for assisting in the correct operation of extrusion equipment
Verifies all processes downstream and upstream are properly manned
Verifies all packaging meets quality standards in areas of performance and appearance
Has good communication with mixer, supervisor, and all other associates.
Is proactive in solving problems
Performs clean outs of equipment and maintains clean and orderly work area
Complies with all safety policies and procedures
Hangs powder bags, grinds blocks, assists in returning blocks to the line, perform block inspection
Assists front end operator in changeovers, start-ups and shutdowns
Perform other duties as assigned
Maintains a clean and safe work environment
Plant location: Garland, TX
Work week and shift: 2nd Shift, Monday through Friday (1:30PM-9:30PM); overtime as needed
High School diploma or equivalent
No immigration sponsorship available for this role
Must be able to lift/carry 50 pounds
Must be able to pass a drug screen and physical exam
Ability to complete training and master skills that are required by position (including but not limited to Hazardous Material Safety and DOT training)
Ability to understand and track safety, quality and productivity data, including run rates, fill weights, and averages
Experience with Total Production Management (TPM) & Continuous Improvement Systems
Strong attention to detail, good communicator and a team member
Ability to meet physical requirements of position
Bulk Truck Operator Cement
Bulk Truck Operator – Cement
Headquartered in Tomball, Texas, BJ Services is the largest North American-focused, pure-play pressure pumping services provider. BJ Services provides hydraulic fracturing and cementing services to leading upstream oil and gas companies engaged in the exploration and production of North American oil and natural gas resources. We operate field locations serving all major North American oil and natural gas shale basins. Our shared culture is built by an unwavering pursuit for perfecting operational execution in the oilfield.
JOB PURPOSE: The Bulk Truck Operator is an entry level position within Fracturing field operations for individuals with prior commercial driving experience and credentialing and is considered a training position for future Field Operator positions. The Operator 1 Sand Truck-Fracturing will be responsible for learning how to drive, operate, and maintain Fracturing Services equipment such as the Iron Truck, Sand Truck, Belt Assist Sand Storage (BASS) and Auxiliary Sand Trucks and Equipment.
ROLES & RESPONSIBILITIES
Responsible for learning and identifying all pieces of treating iron for fracturing jobs (i.e. floppers, check valves, dart valves, 2x1 valves, suction manifolds, hoses, etc), and applying acquired knowledge in the field.
Learns how to drive and operate Fracturing trucks and equipment; progresses to independently driving Iron, Sand, BASS and Auxiliary Sand trucks
Assists in performing emergency roadside repairs as required
Assists Field Operators and Supervisors with rigging in / out fracturing equipment for service
Lifts, carries and moves iron pipes and fracturing equipment to / from trucks and well site
Assembles and disassembles iron and fracturing pieces
Monitors and manipulates sand control gauges, transfer belt controls, valves, and other hydraulic equipment to control sand flow to Blender
Increase or decrease flow speed as needed
Maintains truck and equipment to standards, and ensures all equipment, including personal protective equipment, is in proper working order.
Inspects truck equipment and supplies such as tires, lights, brakes, gas, oil, and water pre-and post-trip
Learns and assists Field Operators and Supervisors with performing routine maintenance on fracturing equipment (i.e. quarterly maintenance inspections, 200 & 400 hour inspections and services on trucks and equipment).
Learns and is responsible for completing required paperwork and submitting it to the appropriate parties accurately and on time (i.e. fuel log report, timesheets and log books, maintenance reports, month-end expense reports, trip permits, etc).
Maintains Safety Standards always: shop, yard, location and while traveling.
Reports all hazards or potentially hazardous situations, accidents, incidents and injuries immediately to supervisor.
Attends weekly Safety Meetings.
All other duties assigned
WORK ENVIRONMENT / PHYSICAL ABILITIES
While performing the duties of this job the employee is regularly exposed to moving mechanical parts and outside weather conditions. The employee is regularly exposed to fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration. The noise level in the environment is moderate to loud.
While performing the duties of this job the employee is regularly required to stand, sit and walk; use hands to finger, handle, or feel and reach with hands and arms, lift up-to 50 pounds. Occasionally required to climb or balance; stoop, kneel, crouch, or crawl; talk, hear and smell; lift more than 100 pounds. The vision requirements include: close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
Class A CDL with Hazmat and Tanker endorsement.
Ability to work on call 24/7.
Must be willing to work weekdays, weekends, and overnight travel.
High School Diploma or equivalent
Willingness to work in physically demanding role-ability to lift 50 lbs on a regular basis.
Willingness to work long hours
Ability to pass DOT physical and drug screen
Ability to pass a background and driving record (MVR) Check
Ability to understand and carry out routine oral and written instructions
Ability to safely operate, maintain, and perform minor repairs on equipment, replacing hoses, minor mechanic type work on pumps, fittings, etc.
Ability to maintain effective working relationship with other employees.
Reliable transportation to and from work.
EQUAL OPPORTUNITY EMPLOYER
BJ Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, BJ Services complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.
Bulk Plant Operator I
General Description: Under strict supervision, the Bulk Plant Operator is responsible for maintaining sufficient inventory for upcoming jobs and keeping the plant in good working order so that blending of materials can be completed in a systematic and well-organized manner.
To do this, the Bulk Plant Operator is also responsible for keeping an inventory of cement/additives, acids/additives and all chemicals on an ongoing basis. The Bulk Plant Operator will also schedule transportation, assist in blending acids and cement prior to shipment and order transportation from third parties on an as needed basis. The Bulk Plant Operator is ultimately responsible for blending and loading the cement, chemicals, and/or acid needed to perform each job, and for maintaining the bulk plant and chemical warehouse.
Essential Functions: 1. Works with regard to quality assurance. 2. Ensures that all supplies and products are properly labeled, stored and disposed of. 3.
Develops necessary skills to operate departmental equipment as well as the ability to identify, maintain and troubleshoot equipment. 4. Works under strict supervision with little or no flexibility in regards to work methodology. Job duties are highly defined and repetitive in nature. 5.
Complies with all company and client Health, Safety, and Environmental (HSE) practices and guidelines. 6. Continually emphasize safety. Participate in safety meetings, hazard hunts and ensures JSA's are followed. 7.
Know, follow and periodically review the requirements established by job policy and procedure. Follow established procedures and guidelines 8. Report unsafe acts, conditions or hazards immediately 9.
Follow instructions given by supervisory personnel. 10. Requires maintained eligibility to drive company light-duty and commercial vehicles. 11. Develops an understanding of district goals and works towards meeting those objectives. 12.
Performs work on his/her own as well as provides assistance to other employees as directed. 13. Performs and assumes other duties and responsibilities as may be required by immediate supervisor. 14. Performs the primary thinking called for and encompassed by the overall Position Definition. 15.
Adheres to Company policies and work requirements. 16. Weighs out chemicals to match each blend amount that needs to be loaded. 17. Blows down and Maintains bulk equipment. 18. Maintains and keeps up with the cleanliness of the bulk plant.
Equipment Operator Class- Lasalle Station
Exelon is looking for Equipment Operators/Entry-level operations candidates at our LaSalle Generating Station in Marseilles, IL The Equipment Operator is an entry-level hands-on position within the Operations job family and leads to becoming a licensed Reactor Operator and Senior Reactor Operator. An SRO license can lead to the highest levels of the Nuclear industry.
Individuals who are selected to fill these vacancies will enter one year of initial non-licensed operator training. Once successfully completed, the candidate will assume shift duties on an operations team. This is a shift work position, which requires mandatory rotating day and night shifts.
The qualified candidate will be responsible for the following: Regularly and customarily is responsible for the monitoring, control and operation of nuclear station equipment for the control room. This includes the following, together with other related and incidental work. 1.
Starts, stops, controls and monitors nuclear reactor and auxiliary reactor systems, as required for plant operations, including taking manual control of equipment as conditions warrant. Starts, stops, controls and monitors steam turbine, main generator and auxiliary turbine generating equipment as required to maintain maximum station capability, including taking manual control of equipment as conditions warrant. 2. As directed, starts, stops, adjusts, tests and operates pumps, valves, switchgear, controls and other components of systems. 3.
Monitors recorders and indicators within the control room for the nuclear and turbine generator systems for operation within prescribed limits. Obtains overview data and performs various calculations as required by procedure. 4. Responds to plant indicators and alarms in accordance with plant procedures including identifying those parameters that are indicative of an emergency condition and initiating designated actions. 5.
Performs operations in accordance with administrative procedures and NRC license including shift turnovers, log maintenance, etc. 6. Responds to and takes action as required in mitigating consequences of plant transient. Required to be thoroughly familiar with entry conditions and cautions for the emergency operating procedure and the basis of each step in the procedures.
Required to be familiar with the abnormal operating event procedures and system diagnostic and restoration procedures. 7. Participates as a member of station fire brigade and will be required to function as fire brigade leader. 8. Assists shift supervision in the performance of any and all of the duties involved in directing and coordinating the actions of the other personnel assigned to assist in operation of the station. 9.
Responsible to identify and correct deficient conditions through the use of the station Corrective Action program, initiating action requests for material condition issues and submitting Procedure change requests. 10. Initiates Emergency Plan in accordance with implementing procedure. 11. Implements tagging and system out-of-service requests, including directing others to realign valves, rack out breakers and hang tags. 12.
During refueling of the reactor, manipulates controls, drives, etc. and observes nuclear and radiation monitoring instruments in accordance with procedural controls. May be required to assist in refueling. 13. Operates station communications equipment as required.
Individuals who are selected to fill these vacancies will enter one year of initial non-licensed operator training. Once successfully completed, the candidate will assume shift duties on an operations team. This is a shift work position.
Candidates must possess an Associate of Science degree or equivalent established by meeting the criteria in one of the following options:
NOTE: Course work in chemistry, math and physics may have been completed at the college or university level, or through the Navy Nuclear Power Program.
Forty-three or more semester-credit hours of course work from a regionally accredited college or university. This course work must include course work in chemistry, math, and physics.
Two or more years of documented industrial operating experience or experience related to power generation, in addition to course work in chemistry, math, and physics.
Documented training and experience applicable to nuclear propulsion (preferred) or power generation operating experience while a member of the armed forces. If you are a potential candidate coming from the Navy you will need to provide the following documents: 1) occupation/training awards history, DD214 and the fitness and counseling 2) evaluations with social security numbers and medical documentation removed.
Trainees must pass the Plant Operator Selection System (POSS) examination, and score satisfactorily on the Basic Math and Science Test (BMST) that are administered by the Human Resources Department.
Trainees must successfully complete a License Medical Screening and Fire Brigade Screening prior to introduction into the Non Licensed Operator Training Program. Candidates failing to qualify physically for licensing will be evaluated by management (preferably prior to hire) on a case-by-case basis.
Trainees must satisfactorily complete a psychological screening.
Trainees must qualify for site unescorted access
Starting hourly rate is $32.95/hour.
Class starts June 2018
Transfer Station Equipment Operator
Advanced Disposal is a company that brings fresh ideas and solutions to the business of a clean environment. It is our people who make the difference and leave the world a cleaner, more beautiful place. We are proud to provide cost-effective and environmen
Heavy Equipment Operator - Transfer Station
Republic Services is an industry leader in U.S. recycling and non-hazardous solid waste. Through our subsidiaries, Republic's collection companies, recycling centers, transfer stations, and landfills focus on providing effective solutions to make proper waste disposal effortless for our 14 million customers. We'll handle it from here., our brand promise, lets customers know they can count on Republic to provide a superior experience while fostering a sustainable Blue Planet for future generations to enjoy a cleaner, safer and healthier world. Why Work with Us Our Company cannot thrive without great people devoted to serving customers, the community and the planet. We hire the best people to make Republic a great place to work. We are focused on attracting talented individuals across professions who are as committed to serving customers and the planet as we are. We strive to create a workplace that's meaningful and rewarding to our 33,000 employees. That's why we are proud to be recognized as Best Large Employer by Forbes, World's Most Ethical Companies by Ethisphere, and Human Rights Campaign Foundation's 2018 Corporate Equality Index.
The Operator – Heavy Equipment is responsible for the safe operation of heavy equipment at a recycling facility, landfill or transfer station for the purpose of transferring, spreading, covering, loading and/or compacting waste or soil in an efficient and safe manner.
Knowledge, Skills & Abilities
Good customer services skills to meet and exceed customer expectations; acts in a professional, courteous and cooperative manner toward customers and co-workers; works with a sense of honesty and trustworthiness.
Good time management skills to ensure assigned responsibilities are completed in an efficient and safe manner.
Good follow through ability; ability to adhere to work schedule and follows through on challenges as they arise.
Ability to adhere to Company policies and rules set forth; promotes the Company's safety standards; does not take inappropriate risks.
Maintains a feeling of pride in work; strives to achieve all goals.
High School diploma or GED
Two years' prior related experience in heavy equipment operation.
One year of prior experience working at sites regulated by OSHA.
Perform pre- and post-operation inspection of the equipment in accordance with Company policy to ensure windows, lights, mirrors and rear view camera are clean. Safely and efficiently operate equipment that may include: forklift, excavator, bulldozer, front-end loader and other equipment using proper safety standards.
Continuously monitor waste for evidence of unacceptable waste in materials.
Continuously monitor the condition of the equipment to ensure it is operationally ready at all times to minimize down time; clean tracks or wheels on equipment, as needed.
Perform and document minor service on equipment, referring more complicated mechanical issues to Maintenance Shop for repair.
Complete Equipment Condition Report and other reports, as necessary; report any necessary repairs to supervisor, as needed.
Follow all required safety policies and procedures.
Ensure that shop is clean, serviced and stored at the completion of each shift.
Perform other job-related duties as assigned. The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
Rewarding Compensation and Benefits
Eligible employees can elect to participate in:
Comprehensive medical benefits coverage, dental plans and vision coverage.
Health care and dependent care spending accounts.
Short- and long-term disability.
Life insurance and accidental death & dismemberment insurance.
Employee and Family Assistance Program (EAP).
Employee discount programs.
401(k) plan with a generous company match.
Employee Stock Purchase Plan (ESPP).
Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, genetic information, or any other characteristic protected by applicable law.
Utilities Station Operator I - Cs-Uso I
Hiring department Utilities & Energy Mgt
Monthly salary $3,629+ depending on qualifications
Hours per week 40.00 Shift
Posting number 17-12-14-02-5135
Job Status Open
FLSA status Non-exempt
Earliest Start Date Immediately
Position Duration Funding expected to continue
Position open to all applicants
Location Austin (main campus)
Number of vacancies 1
Security sensitive; Certified 3-Yr. Driving Record and Criminal Background Check conducted on selected applicant.
Hiring decision is contingent upon applicant clearing background check and driving requirements. Rotating 12 hour shift, includes working weekends and holidays. May be required to report to Pickle Research Campus. May be required to work alternate work schedule.
Required Application Materials
- A Resume is required in order to apply
- A Letter of Interest is required in order to apply.
- A List of 3 References is required in order to apply.
To perform semi-skilled operation of equipment and machinery in a central plant environment.
Starts up, shuts down and adjusts chilling station and power plant systems in accordance with established operational and safety procedures. Accuracy required in all phases of work performed.
Monitors equipment and maintains records of equipment operational status. Operates control computer systems. Performs detailed inspections of operating equipment for proper operation.
Cleans and maintains all equipment and work areas. Informs appropriate personnel of unusual conditions, problems or deficiencies and corrects as necessary. Identifies and reports safety hazards, and corrects as necessary.
May complete work orders using automated maintenance program systems. Demonstrate excellent interpersonal communication skills. Performs related duties as assigned.
Keeps current on all changes to operating procedures, new equipment and related systems. Drive UT vehicle. Maintain acceptable driving record required in accordance with UT System Policy UTS157.
Required to carry University issued cell phone during work and on-call hours. Helps train new personnel. May perform preventative or corrective maintenance.
May be required to operate or ride in a personnel lift. May be required to utilize scaffolding to access plant equipment.
Licenses: Class "C" Operator's Driver's License.
Applicant selected must provide a current three year Driving Record from the current state of residence. If not currently a Texas resident, must obtain a Texas Driver's License within 30 days after entering Texas as a new resident.
Performs other related functions as assigned. Attends staff meetings, safety training or meetings, and plant operation and maintenance training courses. Completion of training certification required within 18 months.
High school graduation or GED. Two years of experience in semi-skilled level operation and maintenance of electrical, industrial or mechanical equipment.
This includes one year experience operating: large industrial compressors, gas turbines, fans, pumps, steam boilers, turbines or similar process plant equipment. Demonstrated ability to work well within a team environment. Demonstrate effective interpersonal communication skills. Equivalent combination of relevant education and experience may be substituted as appropriate.
Experience in a co-generation, utilities power plant, or chilling station environment. More than three years experience in semi-skilled level operation and maintenance of electrical, industrial or mechanical equipment.
More than three years experience operating gas and steam turbines. More than two years experience operating large industrial compressors, fans, boilers and pumps. More than two years experience with computer-based control systems.
Uniforms and/or personal protection equipment (furnished) May work in all weather conditions May work in extreme temperatures May work around chemical fumes May work around standard office conditions May work around biohazards May work around chemicals May work around electrical and mechanical hazards Repetitive use of a keyboard at a workstation Use of manual dexterity Climbing of stairs Climbing of ladders Lifting and moving May be required to work in tunnels, confined spaces, and manholes. Perform elevated work.
May be required to work extended shifts including nights, weekends and holidays. Participate in on-call program.
Compression Station Operator
Compression Station Operator
Reference Code: 48623
Location: United States (US) - West Union, WV
Job Category: Pipeline/Power Operations; Trades/Technical
Employment Type: Employee Full-time
Relocation Eligibility: This position is not eligible for our relocation program
Reporting to the Team Leader, the Compressor Station Operator(s) will operate and maintain compressor station engines and auxiliary equipment, pipelines, and associated facilities; performs related clerical and maintenance duties for Highland Compressor Station. Works in a team environment.
The candidate must live within either 30 miles or 45 minutes of the Compressor Station for emergency response purposes.
Operates compressor engines, auxiliary equipment, pipelines and associated facilities in assigned area;
Analyzes and determines if engines and equipment are operating properly;
Performs routine maintenance including: lubricates as required, maintains proper oil and water levels, checks temperatures for overheating, adjusts equipment, takes readings and maintains log book of readings and pressures;
Relays readings and pressure information to Gas Control;
Maintains constant alertness for equipment failures and pressure changes;
Works alternating shifts as required;
Using PC and/or hand held device, completes Work Orders, enters data into Job Plans, creates new Work Orders, etc. in SAP and other required systems;
Maintains clean engine room, wipes up all spills, mops, etc.;
Performs or assists in pipeline operation and maintenance duties including but not limited to: patrolling for leaks, clearing rights-of-way, repairing leaks, corrosions surveys;
Performs or assists with other periodic duties including but not limited to: chart changing, maintaining drips, equipment inspection, general housekeeping, equipment maintenance/repairs/overhaul, maintenance of grounds/building, travels to and supports other stations as required;
Other tasks as required.
Qualifications & Education
Must have the interpersonal skills to work effectively with other personnel in a team environment;
Must be able to communicate and work well in the team environment;
Must demonstrate basic personal computer (PC) skills, and must have the ability to obtain basic skills in using a hand-held computer;
Must be able to obtain basic skills in using SAP and other required TransCanada systems
High School Graduate or GED preferred;
One to two years' experience in mechanical maintenance.
Depending on the qualifications of the applicants, the successful candidate may be offered a position at a more appropriate level and/or ladder.
Applicants must have legal authorization to work in the country in which the position is based with no restrictions.
All positions require background screening. Some include criminal and/or credit checks in order to comply with regulations.
Please apply to this posting by 03/27/2018. To apply, go to jobs.transcanada.com and enter Reference Code 48623. Only applications submitted through the TransCanada Careers website will be acknowledged.
TransCanada is an equal opportunity employer and participates in the E-Verify program supervised by the U.S. Government.
Make what you do matter.
At TransCanada we dream big, think big and do big things. For over 65 years, we've had the vision and scale to deliver big things that matter to the world. From supplying reliable and efficient energy to millions of North Americans with our pipelines, gas storage and power generation facilities, we believe in making big things possible.
TransCanada is looking for people who are willing to think about the future...and think big. We're looking for people who are ready to take on the most significant challenges of their careers and define energy infrastructure in North America.
Thank you for choosing TransCanada in your career search.
Nearest Major Market: Morgantown
Job Segment: ERP, Clerical, SAP, Inspector, Technology, Administrative, Quality
Apply now "
Central Station Operator
The Central Station Operator monitors all incoming signals received at the proprietary central station. Properly documents all responses for the alarm in the alarm monitoring software. Verifies alarms and notifies the proper authorities and/or key personnel based on the type of alarm signal.
Essential Job Functions
Monitors and processes incoming alarm signals
Works with technicians and installers in the field to verify alarm signals
Notifies the proper authorities and/or key personnel based on the type of alarm signal processed
Performs code changes
Properly documents all responses for the alarm in the alarm monitoring software
Interacts daily with stores and distribution center personnel to provide support on arming and disarming their alarm systems
Skills and Qualifications
Excellent verbal and written communication skills
Able to type at least 35 WPM
Strong organizational skills, ability to multi-task and detail oriented
Must have a reliable work ethic
Will require a Drug Screening
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!