Cabinetmaker Job Description Sample
This is a Limited Term role for a period not to exceed (1) year.
Under general supervision, the purpose of the position is to perform skilled trades work related to cabinet making tasks and projects. This position is responsible for performing design, layout, building, installation and repair of all types of cabinetry in accordance with established project objectives. Work requires technical trade skills and physical agility to successfully perform the work.
1.Receives and reviews work orders and/or cabinetry requests for the purpose of determining materials requirements.
2.Performs field activities in visiting project sites for the purpose of obtaining dimensions, measurements, project layout and other pertinent information.
3.Prepares materials and supplies cost estimates, and calculates labor requirements; prepares materials and supplies orders and submits such for processing.
4.Plans project task and completion schedules, and coordinates installation and/or repair activities with site personnel.
5.Designs and/or reviews drawings, blue prints, sketches and/or related specifications outlining project tasks and sequencing.
6.Builds, installs, and/or repairs various standard and custom cabinetry, shelves, counter tops, and similar items upon request.
7.Works with various mediums in construction and repair activities, as applicable to the assigned project, i.e., laminates, wood stains and finishers, lacquers, glues and paint.
8.Maintains safe and effective operating conditions of shop equipment; operates such in accordance with established safe operating principles and procedures.
9.Reviews and/or maintains various documentation concerning project activities, i.e., billing invoices, projects design materials, maintenance work orders, cost estimates.
10. Maintains cleanliness and order of shop and work areas.'
11. Performs related duties as directed.
1.High school diploma or equivalent;
2.Five (5) years of experience with a minimum of 4 in the area of wood working or cabinetry and a minimum of 1 year experience working with people or customer services.
3.Valid driver's license with driving record that is consistent with fleet safety policy.
4.Ability to work independently with little supervision.
1.Experience in a healthcare environment.
2.Additional vocational or technical training in cabinet making.
3.Valid driver's license with driving record that is consistent with fleet safety policy.
4.Knowledge and previous work experience with a personal computer.
Essential Physical Functions:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
1.Ability to work primarily first shift hours.
2.Ability to stand or walk continuously while performing tasks.
3.Ability to safely lift and to push/pull boxes, equipment and other maintenance related objects weighing up to 50 pounds.
4.Ability to frequently perform fine motor tasks with hands, such as working with drills, saws, sanders and other cabinet making related tools.
5.Ability to work for extended periods in awkward positions or bend/twist while making cabinets
6.Ability to work outside in adverse weather conditions.
7.Ability to wear a respirator and ear muffs/ear plugs while performing some cabinet making tasks.
8.Ability to safely operate a company motor vehicle and comply with the Company's Vehicle Safety Program.
NOTE: Pre-placement protocol J (dated August 2001)
This position does needs a respirator fit testing w/ a chemical vapor respirator
About SSM Health Dean Clinic-
Based in Madison, Wis., Dean Clinic consists of a network of more than 60 clinics in south-central Wisconsin. Our more than 500 physicians provide primary, specialty and tertiary care in the clinics as well as eye care through our Davis Duehr Dean locations.
Dean Clinic also offers urgent care services and operates outpatient surgery centers. Dean Clinic joined SSM Health in 2013.
Carpenter Cabinetmaker Journeyman IV
POSITION INFORMATION: Responsible for constructing, installing, and repairing wooden, architectural, structural elements and furnishings. Establishes the specifications for each job and determines tools and equipment to be used. Recommends replacement or repair of equipment. Operates and maintains equipment.
Construction and Installation. Establishes the specifications of each job based on blueprints, drawings, and diagrams. Determines the tools and materials required for each job. Measures and marks dimensions before cutting to ensure a proper fit. Constructs and installs all wooden, architectural, structural elements, furnishings, and new and altered casework on construction projects.
Costs Estimates. Estimates costs of materials and labor, creates material lists, and requisitions supplies for each job.
Drywall Construction. Constructs drywall partitions. Installs wood and metal doors and frames with related hardware.
Repair. Repairs, inspects, and maintains all wooden and architectural and structural elements and furnishings. Repairs and replaces screens, blinds, shades, acoustical tile ceilings, furniture, fixtures, crates, lockers, etc.
Equipment. Operates and maintains all associated carpentry equipment. Discusses with supervisor cost estimates to replace or repair equipment. Establishes standards and specifications when purchasing new equipment. Maintains a clean, neat, and safe work area.
Record Maintenance. Records time spent on each job. Creates and maintains a list of materials used for each job and forwards to supervisor.
Continuing Education. Continues to say abreast of changing technologies, procedures, and new product items by reading appropriate trade journals, safety codes, and operating manuals.
Snow and Ice Removal. Clears ice and snow from sidewalks, streets, and parking areas using hand tools and/or heavy equipment.
Training. Participates in training and educational activities. Assists with training of others on procedures and operating equipment.
As Needed. Performs various duties as needed to successfully fulfill the function of the position.
Education: High school diploma, GED, or Trade School Certificate
Experience: 24 months Carpentry experience
Certifications/ Licenses: Oklahoma Driver's License
Knowledge/ Skills/ Abilities:
Advanced knowledge of principles and theory in the safe operation of all equipment.
Advanced knowledge of raw materials and how the materials can be used.
Advanced knowledge of design techniques in order to create blueprints, drawings, and schematics.
Advanced knowledge of safety rules and regulations.
Ability to read and understand more complex written procedures, specifications, and blueprints.
Ability to estimate costs of a project to include materials and resources needed to complete the job.
Ability to manage own time and prioritize.
Ability to kneel, squat, climb, pull, push, twist, walk, and stand for extended periods of time.
Ability to lift and carry 80 to 100 pounds.
Cabinetmaker - Full Benefits
Sawtooth Concepts is looking to hire a Cabinetmaker for our custom cabinetry. If hired, you would be responsible for preparing raw materials for the assembly of custom cabinetry, and would also do some finish and installation work as needed.
This is a Full-Time position (Mon-Fri) with some opportunity for overtime. As a sister company to Scentsy, Inc., we provide excellent benefits and competitive wages ($12-16/hour DOE)
THINGS YOU WOULD DO
Trim component parts of joints to ensure snug fit
Assemble cabinet parts; sand & scrape surfaces & joints; and install hardware
Restock parts and maintain a clean work area
Assist with installations as needed
YOU SHOULD HAVE:
High school diploma (or equivalent)
Valid Driver's License (travel to installation sites is required – both locally & out of town)
Previous cabinetmaking or finished wood product experience preferred, but other relevant experience will be considered
Strong working knowledge of tools & equipment common in a cabinet shop, such as: power/hand tools, table saw, router, drill, sander, planer, shaper, panel saw, CNC router, edge bander, etc)
YOU SHOULD BE ABLE TO:
Obtain forklift certification
Use (and take care of) standard tools and equipment of the cabinet making and woodworking trades
Read and interpret and work from blueprints, sketches, and detailed drawings
Perform repetitive work with minimal supervision
Assemble parts and read a tape measure in both standard and metric
Use jigs and templates for reproduction of cabinet parts
Communicate well - both in words and on paper
Work well within a team
Have a strong attention to detail and great problem solving skills
Frequently read, comprehend, write, perform basic mathematic calculations
Adhere to all established procedures, policies, and safety rules as outlined by the Company
This position is required to work in a production environment. Lighting and temperature are adequate. While performing this job, you will be frequently exposed to work near machinery, moving mechanical parts, and/or raw materials. You will also be required to work around warehouse equipment (e.g. forklifts, pulleys). In addition, you may be frequently exposed to strong scents, dirt, fumes, smoke, loud noises, vibration, grease, oil, and dust and occasionally exposed to raw chemicals, heat, steam, and water. You will need to frequently stand, bend, squat, walk, reach above shoulder level, perform repetitive manual dexterity, have both arms and legs accessible and occasionally, sit, and crawl; lift and move up to 100lbs. safely throughout the facility repeatedly; ascend and descend stairs, step stools, ladders, scaffolding, platform ladders or mechanically elevated devices; and frequently work around loud noises and moving machinery.
Location: Savannah, GA
Pay Rate: DOE
Duration: Long Term Contract
Shift: 4x10; must be able to work any shift and work overtime as needed
Must be able to work any shift and work overtime as needed.
Education and Experience
High school diploma/GED. Advanced knowledge of cabinetmaking processes and products. Four (4) years of experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of Company inspection and process specifications preferred.
Under general supervision, fabricates the most complex cabinets and other wood-surfaced subassemblies for installation in aircraft. Assists lead by overseeing projects and providing guidance, assistance and training to co-workers.
Principal Duties and Responsibilities/Essential Functions:
1.Fabricates complex high quality furniture and other wood-surfaced subassemblies using stationary and hand held-tools.
2.Interprets material specifications and design/engineering drawings to ensure finished product meets design and engineering requirements with a high level of quality and detail. Coordinates with supervision to ensure compliance with customer approved design samples.
3.Utilizes a variety of woodworking tools and techniques.
4.Complies with and champions safety, 5S, and housekeeping policies and ensures the protection of aircraft interiors.
5.Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
6.Utilizes the material tracking system to create parts demand, track squawks and to sign-off work.
1.Accepts Lead responsibilities when required. Mentors and trains lesser skilled technicians. 2. Oversees projects and coordinates with Lead to delegate tasks to assigned technicians. 3. Conducts safety audits and assists team members in doing safety audits. 4. Assists in maintaining shop equipment and associated JSAs. 5. Coordinates with other backshops when necessary. 6. Adapts to sudden schedule changes. 7. Performs other duties as required.
1.Demonstrates excellent communication skills, both verbal and written.
2.The ability to read, write, speak, and understand the English language.
3.Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
4.Must be computer literate.
Cabinetmaker (Weekend Shift)
FLYING COLOURS CORP. was established in 1989 is a global leader in all aspects of aircraft completions & maintenance. Flying Colours has grown into a leading aviation service provider with concentration in the following areas:
Refurbishment & Modification
Maintenance & Repair
Avionics Upgrade & Installation
Engineering & Design
Flying Colours is a factory authorized Bombardier service center.
To safely, and efficiently build and finish various cabinets, galleys, lavatories, wardrobes, tables, and other interior furnishings in accordance with the customers' requests, engineered drawings, and completion / finish specifications.
Cabinetmakers / Finishers are expected to work safely and efficiently at all times.
Candidates should have general knowledge of aircraft cabinets and components, including repairing, modifying, refurbishing, and fabricating aircraft cabinets, as well as stripping and re-covering cabinets with new veneer or laminate.
Incumbents fabricate and build various cabinets, galleys, lavatories, wardrobes, tables, closets and related interior components in accordance with customer requests, engineered drawings, and completion specifications. In addition to working with wood components and high-grade veneers, incumbents also work with composite and other light-weight components and materials.
Candidates must be able to understand and work from blueprints as well as other written instructions and design specifications. Strong mathematical knowledge is required, as is the ability to make accurate measurements and finish materials to a high level of quality and precision.
Incumbents must be able to work with engineers and calculate weight & balance data and must be familiar with a variety of hand tools, woodworking machinery and ideally, CNC automation.
Other tasks and assignments include:
Cutting veneer panels to size on saw
Laying out veneer to match grain
Gluing material down w/ spray gun or brush
Trimming off veneer using router in a table jig / hand router
Assemble pre cut panels
install panel pins and inserts using drill and dapco gun
edge fill all open edges and sand flush (hand sand or orbital sander)
cut wood trims and bond onto cabinet (make use of saw/ wood glue and clamps)
install hinge block and hinges (router, screws)
Build up cabinetry
reassemble cabinetry after finish process is complete.
Screwing items back together (screw-driver/ drill)
installing lights, latches, other small items (use of hand tools)
weighing cabinets and document Part number and serial numbers
Gather screws and put into card board for paint
Sand material for finish process
Hand sand or sand with orbital power sander
Wipe off or blow off dust with damp cloth or air-gun
Edge fill any rough areas using putty knife and mixing board, then sand flush by hand
Apply lacquer, clear coats and finishes to finished product surfaces ensuring consistent application and coverage (applied by hand and/or spray equipment)
Repair / prepare surface between coats for additional finishing
Inspect for high quality, clear consistent finish result
Performs work in a productive, diligent, careful and safe manner.
Complete any special projects or other tasks as required or assigned. May be assigned to other areas of operations, based on business or customer requirements.
Works in compliance with all Administrative, Health & Safety policies and procedures as per legislative requirements and as outlined in Company policies.
EDUCATIONAL BACKGROUND & EXPERIENCE REQUIREMENTS
Applicants with aerospace / aviation experience are preferred.
Applicants must have extensive, practical wood-working, surface preparation, finishing and cabinetry experience. In addition to a High School Diploma or equivalent (minimum), preference given to candidates with additional trade certification or education in woodworking, woodwork manufacturing or millwork.
Excellent planning, organization and coordination skills.
Excellent judgment, strong attention to detail.
Please note: The above statement reflects the general details considered necessary to describe the principal functions of the job identified and shall not be considered as a conclusive description of all work required in the position.
Flying Colours Corp is an Equal Opportunity Employer
Cabinet Maker III
Posting Number S00354P Classification Title Benefited Hourly Position Type Disclaimer
Liberty University's hiring practices and EEO Statement are fully in compliance with both federal and state law. Federal law creates an exception to the "religion" component of the employment discrimination laws for religious organizations (including educational institutions), and permits them to give employment preference to members of their own religion. Liberty University is in that category.
Position Title Cabinet Maker III Does this position require driving? Yes Contact Contact Phone Ext Contact Email Job Summary/Basic Function
The Cabinetmaker Lead Tech is responsible for producing cabinets, fixtures. Architectural millwork and wood furniture for the university.
Acts as a lead to cabinetmaker technicians and other personnel, providing training, technical expertise and assistance in performing wood projects, using various cabinetmaking materials and techniques. May coordinate the work activities of less experience cabinetmaker personnel. Inspects job sites and plans repairs. Working independently and exercising good judgment and discretion is essential to this job.
High school diploma or GED. Minimum of 7+ years of related experience in cabinetmaking doing a variety of woodwork. Certifications obtained while employed by Liberty University at the expense of the employer will be reimbursed back to the University upon voluntary termination (resignation) for the first 12 months after acquiring it.
Must be detailed oriented, strong organizational skills and well-developed communications skills.
1.With minimal supervision, fabricates the most complex cabinets, fixtures and furniture with materials such as wood, veneer, and laminates.
2.Is able to work from shop drawings to ensure finished product follows design and specifications with a high level of quality and detail.
3.Is familiar with and is able to utilize a variety of woodworking tools and techniques.
4.Fabricates complex cabinets, fixtures and furniture using stationary and hand held-tools.
5.Knowledgeable in the use, care, and maintenance of a variety of woodworking equipment.
6.Follows all safety and housekeeping policies to ensure a safe working environment.
7.Assists supervisor by overseeing projects and providing guidance and training to co-workers as needed.
8.Must provide own hand tools to perform and complete trade related tasks.
9.Remains abreast of existing and emerging technologies, processes, products, services and leading industry performance benchmarks.
10. Works effectively as a team member, embracing and fostering LU's mission.
11. Essential Personnel; you are required to work during snow events and major on campus events. Performs snow removal activities as assigned, such as shoveling, salting, etc.
12. Reports to work at the required time and performs duties as assigned by the Cabinet Shop Supervisor.
7:00 AM to 5:30 PM
Must be able to work on weekends, holidays, and flexible daily hours as well as various evening hours
Corrections Teaching Asst
Job Class: Corrections Teaching AsstWorking Title: Career Technical Teaching Assistant
Who May Apply: Open to all qualified job seekers
Date Posted: 03/09/2018
Closing Date: 03/26/2018
Hiring Agency: Department of Corrections
Location: Minnesota Correctional Facility (MCF) - Red Wing
Work Shift/Work Hours: Day Shift/ 7:15 am
- 3:45 pm
Days of Work: Monday
Travel Required: No
Salary Range: $16.62- $23.09/hourly; $34,703- $48,212/annually
Classified Status: Classified
Connect 700 Program Eligible: Yes
PLEASE NOTE: THIS POSITION WAS PREVIOUSLY ANNOUNCED. IF YOU PREVIOUSLY APPLIED TO THIS POSTING, YOU DO NOT NEED TO REAPPLY TO BE CONSIDERED.
The Minnesota Department of Corrections has an opening for a Corrections Teaching Assistant at the Minnesota Correctional Facility-Red Wing. This grant-funded position provides support to the Education Department on meeting institutional education goals, specifically to assist career technical instructors and to assist with supervision of students in career technical classes.
Responsibilities include but are not limited to:
Assist residents in their daily educational needs.
Tutor individual students and small groups in Career Technical programs.
Orient new students to power tools and shop safety prior to working on machines.
Provide departmental administrative support.
This position has direct contact with offenders.
The following qualifications are required of all applicants seeking consideration for this position:
- Completion of an Associate's degree or higher from an accredited institution of higher learning;
2) Completion of the equivalent of two years of full-time study (or a minimum of 60 semester credits) at an accredited institution of higher learning; (Note: To qualify by means of #2, you MUST explain how you meet the requirement of #2 in your application/resume. Please include the number of credits you completed with a passing or C grade or better and indicate the type of academic term in which the credits were completed (e.g. semester, quarter, or other). If invited to interview, you will be asked to provide a transcript to verify you qualify by means of #2.)
3) Passing score of 460 points (or higher) on the ParaPro Assessment test AND either a high school diploma or GED certificate. (NOTE: To qualify by means of #3, you MUST include the date you took the ParaPro test and your score, as well as the month/year you received your high school diploma or GED, in your application/resume. If invited to interview, you will be asked to provide a copy of your ParaPro test results/certificate to verify you qualify by means of #3. The ParaPro Assessment measures reading, writing and basic math competencies. For information on the ParaPro test, visit www.ets.org/parapro.)
Other minimum qualifications:
Ability to tutor students in machine tools and cabinetmaking.
Ability to effectively operate a scanner, photocopy machine, printer, calculator, TV, VCR and DVD players, and fax machine; and
Demonstrated computer skills, including experience using email, calendar, presentation, word processing, database, and spreadsheet software applications (e.g. Microsoft Office or similar), and experience with internet navigation; and
Ability to read, speak, and write in English; and
Skills in records management sufficient to gather and maintain statistical and other data for reporting purposes; and
Strong interpersonal skills and the ability to work successfully with a diverse population.
The following qualifications are strongly desired of applicants seeking consideration for this position:
+Completion of a vocational degree program in machine shop, cabinetmaking or a related field.
+Experience working in a career technical program/field such as machine shop or cabinetmaking.
+Experience and skill in educational assessment sufficient to administer, proctor, and score tests/assessments.
+Classroom experience, including teaching, conducting training classes/workshops, and/or tutoring.
+Experience working in an educational setting.
+Experience working in a correctional setting.
Tuberculosis screening may be required prior to hire for this position. For a copy of the Physical Demands Analysis, please contact Deb Wingfield at email@example.com.
The selection process may include screening the top candidate(s) on their criminal history, predatory offender registration, offender associations and/or other applicable background information in accordance with Department of Corrections' policy.
Employment history/reference checks, including incidents of sexual harassment, will also be conducted on the top candidate(s) in accordance with Department of Corrections' policy. This may include a review of job performance and discipline records.
New employees will be fingerprinted within the first 30 days of employment.
Why Work For Us
Join a team with a national reputation for excellence! The Minnesota Department of Corrections (DOC) is highly regarded nationwide and has provided a model for other corrections systems to follow.
Our mission is to reduce recidivism by promoting offender change through proven strategies during safe and secure incarceration and effective community supervision. We offer great State of Minnesota benefits, competitive pay, internal promotional opportunities, free parking, and workout facilities at most locations.
The State of Minnesota offers a comprehensive benefits package including low cost medical and dental insurance, employer paid life insurance, short and long term disability, pre-tax flexible spending accounts, retirement plan, tax-deferred compensation, generous vacation and sick leave, and 11 paid holidays each year.
How to Apply
Click "Apply" at the bottom of this page. If you are unable to apply online, please contact the job information line at 651.259.3637.
For additional information about the application process, go to http://www.mn.gov/careers.
If you have questions about the position, contact Deb Wingfield at firstname.lastname@example.org or 651.361.7303.
AN EQUAL OPPORTUNITY EMPLOYER
The State of Minnesota is an equal opportunity, affirmative action, and veteran-friendly employer. We are committed to providing culturally responsive services to all Minnesotans. The State of Minnesota recognizes that a diverse workforce is essential and strongly encourages qualified women, minorities, individuals with disabilities, and veterans to apply.
We will make reasonable accommodations to all qualified applicants with disabilities. If you are an individual with a disability who needs assistance or cannot access the online job application system, please contact the job information line at 651.259.3637 or email email@example.com. Please indicate what assistance you need.
Return to Previous Page
Under general supervision, the Cabinetmaker is responsible for assembling finished products using tools, machines, and their own hands. Fabricates various types of wood products. The Cabinet Maker reports directly to the Production Manager.
- Studies blueprints or drawings of items to be constructed and plans sequence of cutting or building
- Organizes finished products to be assembled
- Laminates sides of cabinets, doors, edges;. Cleans laminate glue off cabinets
- Inserts screws or dowels in predrilled holes, and fastens parts together with screwdrivers, glue, & clamps
- Glues, fits, and clamps parts and subassemblies together to form complete unit, using clamps or clamping machine
- Fits prefabricated wooden parts together
- Installs hardware such as hinges, catches, and knobs on assembled cabinets
- Trims component parts of joints to ensure snug fit, using handtools, such as planes, chisels, or wood files
- Work with an energetic team to achieve production goals
- Operates edge bander & table saw when needed
- Ensures working environment is safe, clean and organized
- Follows all safety and OSHA standards
- Performs other duties as assigned or required
REQUIRED EDUCATION AND EXPERIENCE:
- Minimum 2 years’ experience in commercial cabinetry or related field, preferred
- A working knowledge of woodworking and general assembly techniques
- Proficient at using a tape measure
Previous experience using hand routers, hinge press, vertical panel saw, etc. is preferred
Assembled cabinets, knowledge of table saw, frequent lifting excess of 50 Lbs, forklift. THIS IS A MUST: ABILITY TO READ A MEASURE TAPE FULL TIME POSITION 40 HRS some overtime will be require due to ...
Cabinet Installer 3 (Lead)
Installs cabinets on high end construction projects
Fabricates cabinets and furniture in the shop as needed
May supervise the work of other Installers
Reads drawings and suggests changes that ...
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!