Case Finishing Machine Adjuster Job Description Sample
Cenveo, a world leader in the management and distribution of print and related offerings is seeking an experienced Envelope Machine Adjuster in its City of Industry, CA facility.
The ideal candidate will have a High School Diploma or equivalent with a mathematics emphasis, 3 years of experience as a Machine Adjuster in a production environment and a high degree of mechanical aptitude.
Cenveo offers a competitive salary and a comprehensive benefits package including, but not limited to medical, dental, vision, life insurance, short & long term disability, 401k, PTO and Company paid holidays.
Under general supervision, sets up and adjusts various types of converting equipment for safe and efficient operation in the production process. This includes the start-up, operation, adjustment to proper parameters involving close tolerances, maintenance, troubleshooting, and cleaning of the equipment.
Primary Duties and Responsibilities (*Essential Functions)
These are functions a qualified incumbent or applicant must be able to perform with or without reasonable accommodation.
At the start of the shift, inspect all orders processed on machine during the previous shift for accuracy of production; obtains approval from lead adjuster or supervisor on start-up of new orders.
Make proper size changes and adjustments to all assigned machines in accordance with estimated change times; note any delays on work order.
Continuously monitor all assigned machines and performance to ensure quality and run speed standards are being met.
Ensure proper machine efficiency anticipating any possible problems. Performs effective preventative maintenance and repairs on equipment as needed.
Ensure all change parts are cleaned and returned to parts cage or other assigned areas at completion of order.
Relay any special instructions or important information pertaining to machine performance to next shift upon their arrival.
Monitor machine shut downs where applicable to ensure proper wash up of machines at end of shift; ensure work area is clean.
Maintain a clean and safe work area free of debris and adhesives.
Check and perform tooling make ready to ensure that it is staged prior to machine going down for change.
Conduct daily work area audit to include housekeeping, organization, work benches, and tools are properly stored.
Perform and fill out all documentation pertaining to lubrication, hoist inspections, and QC checks.
Insure that all printers not in use are cleaned and ink ready (cleaned and assembled) for any upcoming job.
Communicate to management/lead all maintenance and safety issues.
Apply samples to cartons, check skid count, shipping tag, and insure overall appearance of the skid is neat and presentable for shipment.
Ability to work and communicate with others.
Other (Non-Essential) Functions
Includes functions which are normally performed by persons holding this title. However, these functions may be reassigned to other employees as part of a "Reasonable Accommodation" under the ADA.
May act as machine operator and pack envelopes to cover breaks, meal periods or when operator is unavailable.
Performs other duties as assigned.
Physical Requirements & Environmental Conditions
The physical demands required while performing the duties of this job include: required regularly to stand; walk; use hands to finger, handle or feel, reach with hands and arms, twist, talk and hear. The employee is regularly required to stoop, kneel or crouch. The employee must regularly lift or move up to 25 pounds and occasionally lift and or move up to 50 pounds or more with assistance. Specific vision abilities required by this job include close vision, distance vision, and an ability to adjust focus.
This position requires the incumbent to grasp objects utilizing manual dexterity including hand/finger coordination and the utilization of color vision.
The employee is occasionally exposed to moving mechanical parts, fumes, toxic chemicals and heat. Exposure to noise level in the work environment is usually moderate to loud and requires hearing protection and safety shoes
Cenveo is an Equal Opportunity Employer.
High degree of mechanical aptitude and previous assembly/production experience required.
3 years experience in the order inspection of processed materials making proper size changes, adjustments and troubleshooting on equipment.
2 years of mechanical experience preferred but not required.
Willingness to work overtime as needed.
The minimum related language skills required for this position is the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively with coworkers and supervisor.
This position requires an ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
High School education or equivalent.
Regional General Adjuster - Major Case (Human Services)
Our claims department is seeking a Regional General Adjuster for Human Services to join our growing team in our Bedford, NH, Windsor, CT, Worcester, MA or Itasca, IL office.
Responsible for the coverage analysis investigation evaluation negotiation and resolution of specialty claims that represent the company's largest damage exposures. Must be fluent on liability and coverage with the ability to quickly analyze file material and discern key issues; create a plan for strategic claim evaluation; and partner with outside counsel to drive the most efficient.
This candidate must have a high level of technical expertise in handling liability claims. Claims to be handled involve but are not limited to coverage involving General Liability, Commercial Auto, Human Services Professional Liability, Medical Malpractice, Eldercare. Claim types to be handled involve but are not limited to errors and omissions, sexual misconduct, products liability.This is a full-time, exempt role.
- Must possess or secure and maintain appropriate state adjuster license(s) and continuing education credits.Works with high authority limits on assignments reflecting a very high degree of technical complexity and coordination.Possesses a high and extensive level of technical knowledge and skills including product and industry.Negotiate settlements, mitigate losses, and control expenses on our company's largest losses.Maintain a high level of communication with leadership.Responsible to provide consultation and participation in the development of large claim strategies handled by staff adjusters.May co-adjust cases to facilitate learning and to impact file.Recognized as the company consultant in a field providing technical guidance, assistance, and training to lower level associates.May have regional, zone or companywide scope
May be subject matter expert (SME) to coordinate consistent countrywide handling of specific large losses.Required to have and maintain sufficient home-based internet connection.May perform additional duties as assigned.
- Typically has 5 -7 years professional experience
Bachelor's degree or equivalent experience. Higher level degree may be desired
Dedicated to meeting the expectations and requirements of internal and external customers
Makes decisions in an informed, confident and timely manner
Maintains constructive working relationships despite differing perspectives
Strong organizational and time management skills
Ability to negotiate skillfully in difficult situations with both internal and external groups
Demonstrates ability to win concessions without damaging relationships
Demonstrates strong written and verbal communication skills.Promotes and facilitates free and open communication
Understanding of applicable statutes, regulations and case law
Thinks critically and anticipates, recognizes, identifies and develops solutions to problems in a timely manner
Easily adapts to new or different changing situations, requirements or priorities.Cultivates an environment of teamwork and collaboration
Operates with latitude for un-reviewed action or decision
Proficient in MS Office, excel, word, etc.Proficient using Claims systems (i.e. Guidewire, CSS, PMS, etc.).Physical demands & work environment:Ability to use a personal computer and other standard office equipment
Ability to travel as necessary
Ability to sit and/or stand for extended period
Ability to work hours in excess of 40 hours per week.Ability to work in a fast paced changing or stressful environment.Ability to perform work in a noisy/loud work environment.
"The Hanover values diversity in the workplace and among our customers. The company provides equal opportunity for employment and promotion to all qualified employees and applicants on the basis of experience, training, education, and ability to do the available work without regard to race, religion, color, age, sex/gender, sexual orientation, national origin, gender identity, disability, marital status, veteran status, genetic information, ancestry or any other status protected by law.
Furthermore, The Hanover Insurance Group is committed to providing an equal opportunity workplace that is free of discrimination and harassment based on national origin, race, color, religion, gender, ancestry, age, sexual orientation, gender identity, disability, marital status, veteran status, genetic information or any other status protected by law."
As an equal opportunity employer, Hanover does not discriminate against qualified individuals with disabilities. If you require a reasonable accommodation, as a candidate for employment, please inform The Hanover Talent Acquisition office.
Paper Finishing Operator - OTM II - B Shift
As a Finishing operator, you will be responsible for functions occurring within the Finishing center operations. You may be assigned to duties that include: packaging slit rolls to customer specifications, operating the manual packaging line, cutting cores, banding, etc. This requires the understanding of Avery Dennison standard packaging practices and the Exact program packing requirements. Higher level roles in the Finishing operations include the operation of slitting, rewinding and/or automated packaging equipment. This position may be required to rotate. You will work B Shift (4:00 p.m. - 12:00 a.m.).
This posting is for the Quakertown Paper Finishing department and is subject to shift alignment. All interested individuals are encouraged to apply, with those currently in the Quakertown Paper Finishing department receiving first consideration.
In this important role, you will also be responsible for:
Sorting, labeling and packaging finished goods for shipment, per customer specifications, quality requirements and standard practices.
Inspecting general appearance of finished product.
Keeping area supplied with necessary packaging materials.
Preparing cores for machine operators.
Communicating and coordinating necessary information to appropriate shift/department personnel to ensure effective operations.
Tracking multiple orders being packed at one time.
Performing duties to continuously improve quality and productivity.
Maintaining a clean, safe work area.
Performing 5S duties and audits.
Assisting in equipment maintenance activities, as directed.
Participating in group problem-solving teams and continuous improvement activities.
Performing all other duties assigned by supervisor.
What we will be looking for in you:
You regard safety as a core value; serve as role model for other employees and encourage adherence to safety practices, policies and procedures.
You have a strong service and quality focus; address issues effectively when problems arise and take initiative to understand root cause, then communicate / educate the team in a timely manner.
You actively contribute in a team-based environment; encourage open communication and positive interaction with peers and management to effectively reach common goals.
You must be able and willing to work overtime, including short-notice requests.
You will be required show proficiency with computer applications.
You must be able to obtain a Lift Truck Operator's license and be able to lift up to 50 pounds.
- High school diploma or equivalent required.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/DisabledAll your information will be kept confidential according to EEO guidelines.
Riot Finishing Production Operator
ARC/RIOT is looking for a Full-Time Finishing Operator to help us continue to provide the best employment experience for employees; and, continued excellent service for our customers.
We are seeking candidates for our vacant Finishing Operator role. The Finishing Operator works directly with the Sales and Operations teams by using various equipment and machines to finish the printed product to exact customer specifications to support the business by performing the following duties:
Mount printed media to various substrates using mounting adhesives
Trim / cut printed material to specifications
Laminate printed media
Stitch / hem banners
Study production schedule. Estimate hour requirements for completion of job assignments. Inform the Manager of any requests that can't be met. Establish or adjust work procedures to meet production schedules.
Ensure required resources are available to complete job
Address problematic orders and customer complaints.
Inspect finished work for quality, count and sizes.
Minor maintenance functions include cleaning, replenishing consumables, replacing filters and waste containers.
Provide quality customer service to maintain current accounts and enhance the company's image.
Process, comprehend, and follow detailed written and verbal instructions.
Gather, organize, and wrap completed work for delivery to customer.
Keep area stocked with paper and supplies. Notify your supervisor if supplies need to be reordered.
Report mechanical failure to the Production Manager or Branch Manager.
Work overtime when necessary. Overtime is a condition of employment.
Assist in other departments when necessary
Assist in preparing packages for delivery
Perform any other tasks, duties, or functions directed by the Production or Branch Manager.
Excellent eye for detail
Knowledge and understanding of Adobe software a plus
Experience and Qualifications:
2+ years' experience in color reprographics field in a professional environment using graphic applications
1-2 years of direct color services and design such as signage, posters, projects, etc.
Thorough knowledge of materials and equipment utilized in finishing and mounting
Experience in table saws, wall saw, panel saw, drills, hand tools (hammer, box cutter)
Basic Math Skills including addition, subtraction, multiplication and division
Able to measure in fractions of inches up to and including 32nds
Ability to balance multiple priorities in a fast-paced environment and align operations and sales processes to achieve business results
Self-motivated with the ability to work independently, resourcefully with minimal oversight
Demonstrated experience in developing strong working relationships with internal and external customers
Finishing Technican-Part Time (Will Train)
From stitching and binding to special coatings, embossing, intricate folds, die cutting, and 1-to-1 inkjet messaging, our Finishing team uses the industry's most advanced technology to transform ink on paper into finished pieces that grab consumers' attention and drive sales and readership for our customers.
Are you looking for a company that can provide you with both a challenging and rewarding career?
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Entry level pay starting at $13/hr.
We will train! All are encouraged to apply especially those who have worked in manufacturing, warehouse, or factory environments. Warehouse, entry level, machine operator, material handler encouraged to apply!
Quad/Graphics is seeking Part Time General Manufacturing Finishing Technicians to grow with us in our manufacturing environment! A finishing technician position includes the opportunity to learn the printing process from the ground up and advance in a progressive environment. In this position you will assist in the creation of various well known Direct Mail pieces and other related products our Finishing (Bindery) department. Quad/Graphics prides itself on having a grow from within philosophy where employees are provided the opportunity to learn in their roles and grow within the company.
Essential Duties & Responsibilities
The list of duties and responsibilities may include the following but is not limited to:
Remove product from the end of the printing press or finishing machine.
Stack loose signatures off a pallet and transfer to table and then place into a collator hopper.
Transfer completed bundles of product off machine conveyor and stack onto pallets, then place mail bags onto pallet.
Move product with a hand jack or motorized Raymond or Big Joe lift.
Comply with all quality, safety and work rules and regulations.
Effectively communicate with other members of the staff.
Remove skids of product using a Big Joe and Hand Truck.
Follow all clean-up and housekeeping procedures.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The ability to take stacks (average 10-30 lbs.) using repetitive hand/wrist movement, off of the end of a machine (2-4 feet high) and stack product on skids from floor level to 5 feet high using repetitive bending and twisting.
The ability to remove skids (weighing up to 2400 lbs.) by using a Big Joe and Hand Truck
Ability to lift stacks of end boards (30 lbs.) as needed
Lift rolls of banding strap (60 lbs.) as needed
Moving logs as needed without lifting them (stand them up or lie them down)
Ability to adjust stacker using a touch screen
Ability to use a vibrating jogging table
The ability to take stacks of loose signatures ranging (5-30 lbs.) off a pallet of up to 48" in height and transfer to table top work surface 42", and then place into a collator hopper.
Ability to transfer completed bundles of product (10-30 lbs.) off machine conveyor and stack onto pallets or into mail bags that potentially weigh from 5 to 75 lbs. Then place mail bags onto pallet.
The ability to use a hand jack or motorized Raymond or Big Joe lift.
The ability to use a computer, scissors, and tape gun.
At least 18-years of age or older
A solid work history
Quad/Graphics is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military or veteran status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories.
Drug Free Workplace
Finishing Gluer Machine Operator Trainee - Harrison, AR
About WestRock (NYSE: WRK) partners with our customers to provide differentiated paper and packaging solutions that help them win in the marketplace. WestRock’s 45,000 team members support customers around the world from more than 300 operating and business locations spanning North America, South America, Europe, Asia and Australia. Learn more at www.westrock.com.
Finishing Gluer Machine Operator Trainee - Harrison, AR329 W Industrial Park RoadHarrison, Arkansas, 72601United States Finishing Gluer Operator Trainee – Harrison, AR We are seeking a Finishing Gluer Operator Trainee to be located in Harrison AR. The Harrison Folding plant is a high quality producer of packaging products. Planned plant expansions have created new opportunities for qualified The Opportunity: We are seeking a career-minded, experienced manufacturing machine operator. This position starts off as an operator trainee and will be required to move up to the operator position as vacancies occur. This position is responsible for helping run high speed carton forming equipment safely, performing preventative and breakdown maintenance, and participating on a safety team and a production improvement team. Responsibilities also include set up and changeover of machines, production paperwork and assisting crew with all responsibilities that assure quality product and efficient production. ESSENTIAL JOB FUNCTIONS:Troubleshoot mechanical and automation problems
Ability to interact with integrity with the crew and plant leadership
Must meet company’s safety, quality, and productivity standards
Interact with improvement teams to resolve production issues
Continually look for opportunities to improve processes and optimize equipment efficiency.Standard hand tools provided by the company What You Need To Succeed:High school education; 2-year technical degree preferred2 years manufacturing experience or 1 year gluer operator experience in folding carton industry
Willing to work rotating 12 hour shifts
Flexible with day or night shifts
Overtime required as needed
Pay is competitive and will be determined in accordance with your experience. What We Offer:Corporate culture based on integrity, respect, accountability and excellence
Comprehensive training with numerous learning and development opportunities
An attractive salary reflecting skills, competencies and potentialA career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work *CBWRK *JCWRK WestRock Company is an Equal Opportunity Employer committed to creating and maintaining a diverse workforce: Minorities/Females/ Disabled/Veterans #AR
Packaging Machine Adjuster
MAIN JOB PURPOSE:
Underminimal direction of management or other employees, safely performs and guides:the repair, replacement, installation, inspection, enhancements, optimization,testing and troubleshooting of all packaging floor and associated equipment(includes high speed packaging equipment).
Performs Preventative Maintenance Routines includingaccurate, complete and timely follow-up documentation. This documentationincludes computerized work order updates, inventory transactions, verbal andwritten reports, etc.
Applies all technical knowledge and experience toensure that all repairs and size / format changeover set-ups are performed in asafe and effective manner.
Perform equipment inspection, installation,maintenance, repairs, and diagnostics of packaging machinery and all relatedequipment. This also includes accurate, complete and timely follow-updocumentation including work order updates, inventory transactions, verbal andwritten reports, etc.
Effectively uses hand / power tools and shopequipment.
Effectively work with managers, operators,contractors, service people, vendors/suppliers and clients to ensure timely andaccurate completion of services. This includes coordination of activities toensure minimal disruption of production schedules and work flow.
Move and operate various equipment including but notlimited to forklift, high lift, etc.
Defines, selects, requests and expedites parts andmaterials while following approved procedures.
Inspect used parts to determine dimensional changesusing calipers, micrometers and other measuring instruments and diagnose toprevent future problems.
Perform all tasks and responsibilities in a fashionthat assures personal safety and the safety of others and equipment. Report any non-conformance to safety standards.
Effectively communicates with others by presentinginformation, responding to questions and seeking feedback/input.
Effectively works and participates in a teamenvironment.
Actively participates and/or leads in projectinitiatives and selected cross-functional teams as approved.
Schedules and plans daily activities and projectinitiatives.
Performs/follows quality related practices (i.e SPC,TQM, GMP, etc).
Ensures and maintain the quality of product beingmanufactured.
Can be required to train others, participate intraining design and initiate efforts to develop or modify training programs.
Required to stay up to date on emerging technologiesand techniques relating to area(s) of expertise.
Maintains and cleans: work area, job site, shop area,tools and equipment.
Share job related knowledge and information withmanagement and peers.
Mechanical experienceand knowledge with pumps, drives, packaging equipment(stamping press, cartoner machines, bundling machines, case packing machines),high speed equipment, conveyors, glue units, cooling systems, electricalsystems and components.
Working understanding ofbasic electrical and frequency drives. PLC knowledge is a PLUS.
Effective mechanical troubleshootingskills (pneumatic and electric basic skills included) and equipment setupskills for product size changeovers are a must.
Must be able to displaymanual dexterity and perform all physical demands as outlined in the jobdescription.
Ability to use shopequipment in order to perform tasks related to milling, cutting, drilling,grinding, and fabricating of parts / components / equipment.
Basic computer skills ispreferred (utilize CMMS computer systems on-site).
Understand and followall GMP/Plant Hygiene guidelines when performing the daily functions.
Work with little or nodirection on a team or on your own.
Must be able to pass ahands-on troubleshooting evaluation as well as a written maintenance mechanicalaptitude test (pending available professional certifications).
Must be able to workrotating shifts (facility produces 24 hours a day) and be available to workweekends and holidays in environment with regular exposure to moving mechanicalparts and airborne particles.
Must be able to workovertime as needed (both forcible and non-forcible).
Must be able to handleregular walking, standing, and kneeling based on job task(s).
Must be able to wearappropriate protective equipment consistent with job scope.
The noise level in thework environment is usually loud, consistent with a high capacity packagingoperation.
Machine Operators ; Press & Finishing - Scottsburg
Multi-Color is an employer of choice with job stability and a long history of continued expansion in our community. We are one of the largest and most awarded label companies in the world! With over 8,000 dedicated employees and growing, we operate 70 state-of-the-art manufacturing facilities in over 26 countries. We have immediate openings for our Scottsburg, IN facility. The world's leading brands choose us, you should too!
What's In It For You?
A job that provides more time off
Great benefits and pay
Paid training and career advancement
Eligibility for paid vacation
Competitive medical, dental and vision options
Company supplied life and disability insurance
401k retirement plan with a company match
10 paid holidays
Health & wellness plan membership
Monthly fitness facility reimbursement
Recognition for great work!
Multi-Color Corporation believes that people are our greatest asset and our associates are at the very heart of our success. That's why we recruit only highly motivated and focused individuals. Our associates are involved in company and community initiatives. Together, we make a difference!
Want to learn more about us, our technologies and our successful operations? Check us out at www.mcclabel.com or search "Multi-Color" on Facebook to get an insider's view of our plant culture, our people and why we love what we do!
Job Description & Responsibilities:
We are currently looking for Press Operators, Press Support and Converting Operators to work in our highly efficient and very safe manufacturing environment.
3+ years experience in machine operating
3+ years experience doing their own set-ups and running production.
The right candidate will also have a proven track record of stability in work history
Strong mechanical aptitude is required.
Rotogravure Press Operators:
Operates the press, leads the press crew and runs the job in a productive and efficient manner using tools and equipment required
Monitors press performance (registration, copy, color and other quality parameters) on a regular basis
Attains and maintains all defined job objectives related to the planning and execution of quick change over
Views labels with assistance of strobe light
Related duties as assigned
Attains and maintains all defined job objectives related to the planning and execution of quick change over
Cleans press and ancillary equipment
Locates cylinders to and from press
Related duties as assigned
Operation of equipment to convert printed material
Visually inspect product and identify/remove defective material
May view labels to detect quality deviations with the assistance of strobe light
Follows quality work instructions
Related duties as assigned
3+ years experience with operation, set-ups, and production
Proven stability in work history
High School Diploma or GED Equivalent and ability to work in the US without company sponsorship
Comply with all company and safety policies and procedures
Regular and predictable attendance, overtime when required
Ability to assist with press and/or machinery set-up, run, and clean up: detail oriented; excellent verbal skills; ability to read and understand a job ticket.
Ability to differentiate colors (able to pass color test); ability to read a ruler Vision correctable to 20/20
Ability to work in a team environment with a high sense of urgency for on-time completion of assigned activities
Ability to work 12 hour night shift rotation
Print shop experience helpful, but not required
We are an EOE, and Drug-Free workplace. All finalist candidates will be required to pass certain pre-employment requirements.
Label Finishing Machine Operator - Batavia
Are you looking for a CAREER? How about GROWTH OPPORTUNITY and GREAT BENEFITS? Look no further! Multi-Color is a solid, stable, and growing organization, with a proven history and over 100 years of business success.
Become a member of our award-winning, Batavia, Ohio team at Multi-Color's largest facility in the world!
Our offerings include:
Great benefits - medical, dental, vision, company paid life insurance, short-term and long-term disability coverage, and more
401K with company match (where YOU can invest in company stock).
Employee recognition and wellness programs
Paid vacation and holidays - 10 paid holidays a year with no waiting period!
Paid training and certifications
Employee led safety and community involvement teams
Company provided uniforms
Wide range of growth and promotion opportunities
Stability & security for your future
Our Label Finishing Machine Operators are responsible for:
Producing top quality labels for our amazing and loyal customers.
Operating a slitting machine, safely handle slitting blades, splice rolls, and produce finished labels in a productive and efficient manner.
Monitoring machine performance (registration, copy, color and other quality parameters) on a regular basis.
Viewing labels with assistance of a strobe light.
Communicating, planning and delivering on a quick change over as efficiently as possible.
Training and working with work cell team members to hang rolls, prep rolls for slitting, packing finished labels, etc.
Qualified candidates must be able to work day or night shift, 12 hour rotation, and weekends based on schedule assigned*
Be SAFE - Comply with all company and safety policies and procedures.
Be DEPENDABLE - Regular and predictable attendance, overtime when required. 12 hour rotating shifts.
Be a TEAM PLAYER - Ability to assist others with machine set‐up, run, and clean up.
Be CARING - Pay attention to the details; respect others, and communicate openly.
High School Diploma or GED Equivalent required.
Ability to work in the US without company sponsorship required.
Ability to work in a team environment with a high sense of urgency for on‐time completion of assigned activities.
Ability to work a 12 hour night shift.
- 3+ years' experience operating a machine (Slitter, Rewinder, CNC machine, brake press, drill press, )
- Experience in a printing environment a plus.
Offline Finishing Operator /7
Requisition ID: 005519
Sets up and operates all equipment to perform manual operations necessary to finish loose component parts (back panels, rails, knobs and other furniture items) in off-line finishing area.
Applies all finishing material to component parts and racks for air-drying.
Sands sealer and lacquer finishes by hand and uses steel wool when finish requires this process.
Blends glazes by hand until specified appearance is acquired.
Presses button to start spray booth exhaust fan.
Turns sprayer valve and nozzle to regulate width and pressure of spray applying knowledge of painting technique.
Presses trigger of spray gun and directs spray onto surfaces of furniture articles to apply uniform finish coating.
Trucks finished parts to next location.
Cleans spray gun with solvents at end of each day.
Performs other duties at the Supervisor's direction.
Maintains equipment and work area in neat and orderly manner.
Notifies Supervisor of any quality and/or safety issues.
Detects faulty materials/process and notifies Supervisor.
Follows prescribed safety policies and procedures.
- Must be able to routinely stand, walk, bend, reach, push, pull and lift moderate to heavy items.
Ethan Allen is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. We are an E-Verify Employer. eamanufacturing
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!