Centrifuge Operator Plasma Processing Job Description Sample
Centrifuge Operator - Experience with Dewatering Equipment (Belt Press, Filter Press, Centrifuge and Dredge). TWIC Required. Job located in Norco, LA Practices safety procedures in accordance with training and guidelines when working.
Provide industrial services using appropriate techniques including handwork or manual work in accordance with established methods and applicable regulations. Manually cleans, installs, fits, repairs valves, caps, hoses, pumps, gaskets and all other external and internal equipment on projects Understanding of equipment maintenance and ability to perform maintenance. Maintains good housekeeping and cleanliness in the cleaning areas.
Reports complaints, rejections or safety issues to management. Checks equipment at the start of each shift performs other duties as required. PRINCIPAL DUTIES & RESPONSIBILITIES: • Assist in the operation of industrial waste treatment equipment or power tools as directed and in accordance with established company and client’s facility rules. • Hooks up and breaks down hoses using proper tools when directed by Operator or Project Manager.
Cleans up work area and equipment after work is complete. • Assist in maintaining safe and clean work place. • Assists in the inspection of equipment, hoses, connections, pumps, and general work area prior to starting any job. Informs supervisor of deficiencies which may cause accidents, injuries, or lost productivity. • Wears the personal protective equipment prescribed by posted signs, written instructions, and work permits. Also, wears additional protective equipment specified by his/her supervisor or clients Safety Department. • Promotes safety through own actions and work habits. Reports all accidents and near misses, involving self, company vehicles, or other job personnel to his/her supervisor immediately. • Does not operate alone must be able to follow the direction of supervisor REQUIREMENTS: • TWIC card • Basic safety courses including site specific procedures; All required local training, Successful completion of all required and OSHA training as a condition of employment • Must pass a pre-employment physical. • Must have access to a telephone. • Must be willing to be on a 24 hour per day call out basis, 7 days per week. • If away from place of residence, must maintain regular contact with the company. • Is willing and able to work overtime, shift work, rotating schedules, irregular hours, nights, weekends, and/or holidays as business needs may require • Compliance with MVR, Drug and with Background checking policy • Compliance with physical requirements JOB RELATED EXPERIENCE: • Must have two years of verifiable experience as a Centrifuge Technician or equivalent DEMONSTRATED KNOWLEDGE, SKILLS AND ABILITIES: • Develops a basic working knowledge of all services provided by the company Reading, writing and comprehending in English Basic math skills Complete OSHA 29CFR 1910.120 (40 Hour HAZWOPER Training) An Operator is responsible for opening and maintaining industrial waste treatment equipment at the job site and all required functions associated with waste water treatment equipment provided by the company. • Attention to detail • Ability to follow procedures • Safe driving WORKING ENVIRONMENT: • Plant environment • Ability to lift up to 150 lbs. • Is willing and able to work overtime, shift work, rotating schedules, irregular hours, nights, weekends, and/or holidays as business needs may require
About Us Republic Services is an industry leader in U.S. recycling and non-hazardous solid waste. Through our subsidiaries, Republic’s collection companies, recycling centers, transfer stations, and landfills focus on providing effective solutions to make proper waste disposal effortless for our 14 million customers.
We’ll handle it from here., our brand promise, lets customers know they can count on Republic to provide a superior experience while fostering a sustainable Blue Planet for future generations to enjoy a cleaner, safer and healthier world. Why Work with Us Our Company cannot thrive without great people devoted to serving customers, the community, and the planet. We hire the best people to make Republic a great place to work.
We are focused on attracting talented individuals across professions who are as committed to serving customers and the planet as we are. We strive to create a workplace that's meaningful and rewarding to our 33,000 employees. That's why we are proud to be recognized as Best Large Employer by Forbes, World’s Most Ethical Companies by Ethisphere, and One of the Most Meaningful Companies to Work for in America by Business Insider.
Job Description The Company’s E&P division provides oilfield waste services to its customer base and operates three types of waste management and disposal facilities: treatment, recovery and disposal facilities; engineered landfills; and salt water disposal injection wells. The Centrifuge Operator is responsible for Fluid Environmental Services (FES) mobilization, operation and demobilization.
Knowledge, Skills & Abilities
Principal Responsibilities • Supervises FES mobilization and operation. • Demobilizes FES equipment, including dryings, centrifuges, vacuums, screw conveyors and pumps. • Troubleshoots equipment issues, performs equipment maintenance and orders equipment and supplies. • Supervises operators during service delivery. • Attends all required safety meetings and conducts all business activities in accordance with the Company’s policies. • Performs other job-related duties as assigned or apparent. The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.
Qualifications • High school diploma or GED. (Required.) • One (1) year of experience in a mechanical equipment related role. (Required.) • Experience in the oil and gas industry. • One (1) year experience in solids control or oilfield fluid processing technology.
Rewarding Compensation and Benefits Eligible employees can elect to participate in: • Comprehensive medical benefits coverage, dental plans and vision coverage. • Health care and dependent care spending accounts. • Short- and long-term disability. • Life insurance and accidental death & dismemberment insurance. • Employee and Family Assistance Program (EAP). • Employee discount programs. • 401(k) plan with a generous company match. • Employee Stock Purchase Plan (ESPP). Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, genetic information, or any other characteristic protected by applicable law.
Centrifuge Operator I - Lufkin, Texas
Equal Opportunity Employer: Minority/Female/Disability/Veteran Waste Management (WM), a Fortune 250 company, is the leading provider of comprehensive waste and environmental services in North America. We are strongly committed to a foundation of operating excellence, professionalism and financial strength. WM serves nearly 25 million customers in residential, commercial, industrial and municipal markets throughout North America through a network of collection operations, transfer stations, landfills, recycling facilities and waste-based energy production projects. I. Job Summary The Centrifuge Technician I is primarily responsible for operating and maintaining process equipment. This person will be required to safely operate Thermal Desorption Technology, Centrifuge Technology and/or chemical treatment. II. Duties and Responsibilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.
Ensures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times.
Assists job site construction.
Operates and maintains site process equipment.
Operates Centrifuges at customer site + Travels to customer sites to operate equipment and assist the customer.
Records and maintains daily operations and preventive maintenance logs. III. Supervisory Responsibilities This job has no supervisory duties. IV. Qualifications The requirements listed below are representative of the qualifications necessary to perform the job. A. Education and Experience
Education: High school diploma or G.E.D. (accredited).
Experience: None required (in addition to education). B. Certificates, Licenses, Registrations or Other Requirements
TWIC Card preferred + Forklift Certification preferred + Basic Plus Safety Training + OSHA Hazardous Material training a plus
Must be willing to travel up to 90% of the time C. Other Knowledge, Skills or Abilities Required
Must not be color blind.
Must have the ability to operate an all-terrain forklift
Must be willing to work outdoors in inclement weather conditions for extended periods.
Computer proficiency skills to include Microsoft Word and Excel + Base shift schedule is Monday – Friday from 6 am – 6 pm. routinely. Additional weekend and alternating night shifts may be required + Additional call out hours for Saturdays and Sundays are expected, with longer working hours required during turnarounds or upsets. V. Work Environment Listed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job.
Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc) most of the work day; + Required to exert physical effort in handling objects less than 50 pounds rarely; + Required to be exposed to physical occupational risks (such as cuts, burns, exposure to toxic chemicals, etc) frequently; + Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements frequently; Normal setting for this job is: Customer site. Benefits At Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. If this sounds like the opportunity that you have been looking for, please click "Apply.”
Title:Centrifuge Operator I - Lufkin, Texas
Experienced Plasma Machine Operator
Summary of Position:
The Plasma Operator is responsible for programming, setup, operation and maintenance of programmable Plasma Cutting machines. Applicant must possess a strong mechanical aptitude as well as the ability to communicate clearly and follow directions.
Description of Duties:
*The Plasma Operator will perform machine programming and setup for all parts as per drawings. Operator must understand tooling set-up and measurement.
* The candidate must be able to effectively read, write, understand technical instructions and follow these written and oral instructions as provided by the shop manager.
* Must possess solid troubleshooting and communications skills
Candidate must have:
* Minimum 2 years experience operating plasma cutter
*Basic understanding of material grades
*High School Diploma or equivalent
*Experience with Messer Cutting Systems
This is a full time position, hours are from 4p.m to 12:30a.m
Plasma Spray Operator
Coursework in machine technology a plus
Ability to interact effectively and work efficiently with people at all levels in an organization
Previous manufacturing machining experience
Ability to read and/or adjust micrometers and calipers
Welding and lathe experience a plus
Strong attention to detail
Work under limited supervision
Flexible toward occasional overtime and weekend work
Ability to lift 50 lbs
Duties and Responsibilities
Cylinder base preparation
Grit blasting and surface prep
Journal repairs for grinding and laser engraving operations
Application of build-up materials, ceramic powder and sealers
Medustrial, a service of Condustrial, Inc. provides supplemental staffing for the healthcare industry... (long term care, hospitals, government agencies & facilities).
Tech Plasma Processing
Responsible for the accurate and timely sampling, testing, shipping and storage of plasma collected from donors. 1 In compliance with Standard Operating Procedures (SOPs), responsible for collecting plasma samples and moving plasma units to freezer to ensure product quality. 2 Ensures plasma units are properly stored according to SOPs, which could include unsuitable plasma units and samples. 3 Ensures accuracy of unit labeling by verifying the pre-printed label matches the dynamic label. 4 Utilizes sterile technique to draw samples and uses heat sealer to assure the sterility and quality of plasma unit samples per SOPs. 5 May ensure samples and units are packed and shipped in accordance with SOPs and center procedures. Prepares shipping and unit disposal documentation. 6 Monitors freezer and refrigerator temperatures and immediately informs appropriate personnel if equipment is not functioning properly.
Records variances. 7 Conducts daily calibration of equipment according to SOPs. 8 Ensures the accurate recording of donor data in the electronic donor information management system as outlined in the SOPs. 9 Understands the policies and procedures associated with hyper immune programs at the center if applicable. 10 Maintains clean efficient work environment, and ensures sufficient operating supplies and forms are available as needed. Follows all Health Safety & Environmental (HSE) and Occupational Safety and Health Administration (OSHA) policies and procedures. Promotes safety in all actions. 11 Maintains confidentiality of all personnel, donor and center information. 12 May be cross-trained in other areas to meet the needs of the business. 13 Bilingual skills may be required, at the discretion of the organization, to meet the needs of the business. 14 Perform other job-related duties as assigned.
Education • High school diploma or equivalent required Experience • Minimum of three (3) months experience in laboratory or warehouse environment preferred or equivalent combination of education and experience • Must be able to perform basic math calculations Working Conditions (physical & mental requirements) • Ability to understand, remember and apply oral and/or written instructions • Ability to understand and follow basic instructions and guidelines • Must be able to see and speak with customers and observe equipment operation. • Occasionally perform tasks while standing and walking up to 100% of time • Reach, bend, kneel and have high level of manual dexterity • Occasionally be required to lift and carry up to 25 pounds • Fast paced environment with frequent interruptions • Frequently exposed to hazardous chemicals, extreme temperatures and to blood borne pathogens • Required to wear Personal Protective Equipment while performing specific tasks or in certain areas • Required to work overtime and extended hours to support center operational needs All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, veteran status, national origin or other legally protected classifications. Worker Type: Employee Worker Sub Type: Regular
Plasma Material Handling Associate Operator
Grifols is a global healthcare company whose mission is to improve the health and well-being of people. Our three divisions –Bioscience, Diagnostic and Hospital–develop, produce and market our innovative products and services to medical professionals in more than 100 countries. We are committed to fostering an environment that creates continuous learning opportunities and encourages professional development and growth. As a company devoted to improving the health and well-being of people, we are looking for talented professionals worldwide. Make a difference and join us in this challenging and rewarding enterprise.
Shift: 1st Hours 5:30 am
2:00 pm (Mon
Fri) Operator will assist in processing the plasma receipt and verification efficiently, effectively and accurately. The operator will help maintain production area at a level that meets or exceeds cGMP standards for quality and safety for 2.6 million liters of plasma per year. The operator will perform all functions associated with the electronic verification of all units/cases of raw plasma to be processed in manufacturing pools at the Clayton or 3rd party facilities. Major tasks of position include but are not limited to:
Electronically verify all units of plasma that are to be assigned to internal or 3rd party processed manufacturing plasma lots. This is to be done by using radio frequency technology to scan each unit of plasma
Research and resolve a discrepancy that is observed during the Plasma Lot Consolidation process.
Identify, remove, destroy, and document all units of raw plasma that have been previously identified as discrepant.
Assemble and label all skids of raw plasma that are verified for each manufacturing plasma lot. Each plasma lot contains approximately 550 containers that must be placed on skids manually; stretch wrapped, and labeled with PU or Plasma Lot numbers to provide traceability.
Sign for every case received, complete all associated paperwork and RF scan to correct dynamic Bin.
Troubleshoot any discrepancies between paperwork and physical cases received.
Operate various pieces of material handling equipment (i.e. forklifts, pallet jacks, straddle stackers) to maneuver material within the designated work areas.
- Perform housekeeping within assigned work area and discard bio-hazardous waste and debris in a manner that is compliant with waste handling procedures.
Requires high school diploma or equivalent
Prior use of SGP for Plasma Operations with regard to Material Handling functionality is preferred for this position.
Past or present work experience in a manufacturing or warehouse setting is required.
Knowledge of math rounding rules and use of decimals is required.
Must be able to work effectively as a member of a team.
Requires prolonged standing, walking, bending and lifting up to 50lbs.
Requires work in cold (+5) environment and occasional (-30) environment.
Immunizations are required.
Strong preference will be given to applicants that possess experience with the following: 1) SGP Plasma Management System and knowledge of the SGP SOP’s. 2) The use of RFT scanners using the SGP application.
This position requires that applicants not be afraid of heights. As part of the interview process you will be required to physically climb a 90 foot vertical ladder while wearing a safety harness. Attributes: Work is performed in a manufacturing environment with rotating shifts. Exposure to biological fluids with potential exposure to infectious organisms. Exposure to chemicals, electrical manufacturing equipment, hand tools and moving machinery. Exposure to high levels of noise and to extreme cold below 32*. Occasional entry into confined spaces requiring kneeling and squatting. Operates forklifts, tractors and power equipment. Personal protective equipment required such as protective eyewear, safety shoes, gloves and garments. Work is performed standing and walking for 4-6 hours per day. Bending and twisting neck and waist for 4-6 hours per day. Frequent hand movement of both hands with the ability to make fast, simple, movements of the fingers, hands, and wrists. Ability to make precise coordinated movements, of the fingers to grasp and manipulate objects. Frequent foot movement. Frequent moderate lifting and carrying of 15-44lbs. Frequent heavy lifting and carrying of 45lbs. with a maximum lift of 50lbs. Occasionally reaches above and below shoulder height. Hearing acuity essential. Color perception/discrimination, depth perception and far vision correctable in one eye to 20/30 and to 20/100 in the other eye. Able to communicate information and ideas so others will understand; with the ability to listen to and understand information and ideas presented through spoken and written words and sentences. Frequently performs simple and routine tasks that vary little each day by following a set of written or oral instructions/procedures. EEO Minorities/Women/Disabled/Veterans
Location:[[mfield6]] Learn more about Grifols at http://www.grifols.com/es/web/international/home
Plasma Operator easy apply
- apply with indeed
location:De Pere, WI
salary:$13 - $15 per hour
date posted:Wednesday, January 3, 2018
job type:Temp to Perm
questions:firstname.lastname@example.org easy apply
apply with indeed
- Follow all SOP/SPI - Ensure all product meets quality and customer expectations
Report any maintenance or product issues to supervisors
- Operate and maintain computerized laser generator Working hours: 2nd shift
- This individual must be proficient in reading and writing in the English language
Proficient in computer usage
Strong mathematical aptitude - ability to read micrometers (up to .0001 accuracy), calipers, and tape measures
Ability to read blueprints is preferred Candidates must submit to a criminal background check and drug screen Start your career today! Visit www.randstadstaffing.com ,send your resume to Cassidy at Cassidy.email@example.com call the office 9204693742 or stop in! We are located at 821 S Huron Road Suite A Green Bay, WI 54311 Randstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temporary-to-permanent or permanent opportunities, no one works harder for you than Randstad. EEO Employer: Race, Religion, Color, National Origin, Citizenship, Sex, Age, Disability, Ancestry, Veteran Status, Genetic Information, Service in the Uniformed Services or any other classification protected by law.
location:De Pere, WI
salary:$13 - $15 per hour
date posted:Wednesday, January 3, 2018
Plasma Table Operator – 1St Shift
Busy manufacturing company is looking for a 1st shift Plasma Table Operator
Pay and Benefits:
Health, Dental, Life, Vision, Short Term Disability, and Critical Illness Insurance after 90 days
- Load equipment with product using the overhead crane and/or forklift
- Remove all materials from the burn table after cutting
- Prepare equipment to cut material by downloading or programming the computer
- Package material for shipping when needed
- Measure material before/after cutting to ensure compliance with customer specifications
- Complete inspection reports
- Perform preventive maintenance
- Wear approved personal protective equipment such as safety shoes, gloves, safety glasses, etc
- Perform other duties as assigned by a supervisor
Knowledge, Abilities, skills:
- A minimum of one (1) year previous burn table work experience is preferred
- Ability to read and understand measuring tools and equipment such as a tape measure, calipers, and micrometer
- Ability to safely operate overhead cranes and forklifts
- Ability to perform math including addition, subtraction, multiplication and division of fractions as well as convert fractions to decimals or vice versa
- Ability to recognize and interpret colors according to the company’s classification system
- Ability to lift and move up to 75 pounds
- Knowledge of general shop procedures and rules including safety precautions
- Ability and willingness to cooperate with co-workers and work as part of a production team
Please submit resume for immediate consideration!
Fastest growing Staffing Firm in the Twin Cities!
Medical, Dental, Vision, PTO, Holiday's
Plasma Cutter Operator
We are seeking a Plasma Cutter Operator to become an integral part of our team! The Plasma Cutter Operator will use specialized equipment to weld and assemble new metal forms.
- Manufacture and fabricate finished metal products
- Install and repair various equipment and components
- Follow blueprints to meet product specifications
- Calculate material measurements to verify specifications
- Conduct tests to evaluate weld quality and tolerance
- Previous experience in Plasma Cutting, manufacturing, or other related fields
- Familiarity with Plasma Cutting tools and procedures
- Familiarity with engineering blueprints and schematics
- Ability to handle physical workload
As one of the largest custom and diverse precision machine/fabrication shops in the southeast, CBM offers a full line of CNC Milling, CNC Turning, fabrication, welding, painting, sandblasting, assembly, and repair services for large parts. Our facility includes 22 overhead cranes with a lifting capacity of up to 100,000 lbs. CBM currently operates 20 hours per day to accommodate our customers needs. CBM is ISO 9001:2008 certified, and woman owned!
Our highly trained staff of Engineers, Machinists, Painters, Quality Technicians, Assembly Technicians, and Fabrication Specialists will ensure that our customer specifications and expectations are met and exceeded. Our engineering department is capable of reverse engineering parts, and creating CAD drawings upon request. CBMs chief objective is to provide quality parts promptly to the leading manufacturers of North America!
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!