Chipping Machine Operator Job Description Sample
Chipping And Small Wheel Grinder - 2Nd Shift
Summary: Cleans and removes excess material from castings using hand grinders. Once trained, this position will work our 2nd shift, which is normally 3pm-11pm.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Grinds all welds, seams, and high spots marked by the line inspector safely and efficiently using large hand grinders.
Inspects equipment daily.
Communicates to supervisor quality and equipment problems.
Follows job work instructions and training matrix, where applicable.
To perform the job successfully, an individual should demonstrate the following competencies: demonstrates attention to detail; is consistently at work and on time; makes timely decisions; uses time efficiently; demonstrates accuracy and thoroughness; works quickly; observes safety and security procedures.
Additional Competencies for Chip and Small Wheel Level A:
To perform the job successfully, an individual should demonstrate the following competencies: demonstrates a higher level of attention to detail, accuracy, and thoroughness than at Level B. At Level A, an employee is quicker and uses time more efficiently than at Level B.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
High School diploma or GED preferred, but not required; or up to one month related experience or training; or equivalent combination of education and experience.
Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences.
Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's.
Ability to apply common sense understanding to carry out simple one- or two-step instructions. Ability to deal with standardized situations with only occasional or no variables.
No Computer skills needed.
Certificates and Licenses:
No certifications needed
This job has no supervisory responsibilities.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts; fumes or airborne particles; extreme heat (non-weather) and vibration. The employee is frequently exposed to toxic or caustic chemicals.
The employee is occasionally exposed to wet or humid; outdoor weather conditions; extreme cold. The employee may be exposed to risk of electrical shock and risk of radiation. The noise level in the work environment is usually very loud.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee must regularly hold, lift and /or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception and ability to adjust focus.
While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; talk or hear and taste or smell. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to walk.
Machine Operator III - Fin Machine Operator
Ensuring Chart's Success…
Chart's manufacturing group is critical to building our products on time and of the highest quality to our customers. The Machine Operator III will work towards our production goals along with peers through the direction of lead man, shift supervisor, and plant manager.
What Your Day-to-Day Activities Will Be…
Candidates will have be running McElroy and Happy fin tube machines
Reads, interprets drawings and written instruction applicable to specific machining process.
Performs set-up and operation as required without supervision.
Performs all required measurements.
Capable of required tool selection for required task.
Trains, or assists in training new employees.
Can safely operate overhead or jib type cranes and rigging.
Performs all non-electrical preventative maintenance as indicated by supervision for specific machinery.
Adhere to all safety guidelines and policies.
Other duties as assigned.
Your Professional Experience Should Be…
- The ability to reading a tape measure as well as blue prints.
Your Education Should Be…
- High School Diploma or Equivalent Work Experience
Your Physical Work Environment Will Require…
While performing the duties of this job, the employee is regularly required to:
Standing for prolonged periods of time.
Occasional repetitive lifting up to 60 lbs as regular daily activities necessitate.
Handle or feel objects.
Tools or controls and talk or hear.
The employee is occasionally required to walk, stoop, kneel, crouch or crawl.
Chart Industries is an equal opportunity employer.
CNC Machine Operator
Symmons Industries is a family-owned, premier domestic manufacturer of commercial and residential plumbing products. We are proudly respected in the industry for the quality of our products and customized service levels. Headquartered in Braintree, MA, Symmons is currently seeking a CNC Machine Operator to operate and support all metal working and processing machinery as well as manufacture components for assembly.
Machine production operation on CNC Millers, CNC Lathes, Drill Presses, Bridgeports, Saw Cutters, and other manufacturing machine equipment
Operate and provide support on all metal working and processing machinery (i.e. Kanban Processes, quality control and inspecting machined parts)Manufacture machine Copper Alloys, Steels, and Plastics
Operate Fanuc and OSP family Controllers
Check, adjust and manage lube oil and water-soluble coolant machine tanks
Clean out machine of material and manage chips collection and distribution to chip spinning cell
Support the operation of the equipment tooling sequencing and basic understand production, including lights out operation
Operate from issued blueprints, verbal and written work instructions to produce qualified parts
Maintain product quality and quantities hourly. As required, product must be checked with prescribed inspection sample sets with various inspection measurement instruments
Work from schedules, Kanban signals, and work orders
Material handling - as needed, move material from one area to another with the use of material handling equipment (such as wheeled-carts, pallet jacks or 2-wheel hand trucks)
Maintain machinist maintenance of machine, and incoming/outgoing material, post transactions of all make parts made each day
Maintain clean cell area, practice 5S principles. Maintains safe and clean work environment by complying with safety procedures
Perform other duties and responsibilities as necessary
Adhere to company safety policy and procedures
To maintain a team atmosphere by communicating effectively within the department, as well as through-out the company.
High School Diploma/GED equivalent, Vocational Technical experience preferred
1-3 years of CNC Operator experience
Required to perform machine cell labor with heavy lifting of up to 35 pounds is necessary
Demonstrate dependability through good judgment and be able to work well with a wide range of people as a team, in varied cell environments
Passing Grade on the Basic Math, Comprehensive English and Mechanical Aptitude Tests
Hours: Monday-Friday, 7:00 am- 3:30 pm
Symmons Industries is a premier manufacturer of commercial and residential plumbing products, setting the standard for quality in plumbing fittings since 1939. From the pioneering development of our pressure balancing anti-scald shower valve, to our expansive range of exceptional customized Design Studio products for the kitchen and bath - we have maintained an unrivaled commitment to quality materials, superior engineering and solid workmanship. As an industry leader, Symmons continues to innovate within the custom fittings category, creating distinctive design solutions for premium hospitality and condominium projects. Pairing reliable behind the wall technology with stylish and durable products in front of the wall, Symmons is truly the smart choice in plumbing. Headquartered in Braintree, MA, Symmons is a privately-held company with regional sales offices and local representatives located throughout the United States and Canada. For more information please visit www.symmons.com.
Symmons offers a competitive compensation package including excellent benefits and a 401k plan with 100% match up to the first 6% of eligible wages with immediate vesting.
Ellwood Mill Products, located in New Castle, PA, is a subsidiary of Ellwood City Forge. For over 100 years, ECF has pushed the boundaries of precision manufacturing and engineering to make us a leader in open-die forging, rough machining, and heat treating; we will continue to do so long into the future. Our products are used in the most demanding applications—from high performance machine components to nuclear submarines. With state-of-the-art equipment, our engineering and technical teams solve some of the biggest challenges in our industry.
About This Position
This position is responsible to function as a member of a work team to produce various Rough Machined forgings to Customer's specifications. Performs all functions within the Cell including lathes, mills, saws and other equipment.
What You'll Get:
Competitive compensation including profit sharing.
401(k) retirement plan.
Affordable medical, dental and vision plans.
Health savings account.
Life, AD&D, and disability benefits.
What You'll Do:
Verifies sizes of parts, and ensures parts will meet the customer's requirements by properly performing layout operations. Completes non-conforming material reports (NCM) when necessary.
Loads and unloads machines with aid of overhead crane. Operates machine and material handling equipment with care to avoid damage. Utilizes a variety of below hook lifting devices as appropriate for the part/task.
Assumes ownership of the part once cutting begins
Sets up and operates machines to perform required operations. Selects, installs and changes tooling as required to maintain cut quality.
Sets up and operate saw/lathe/mill/core tester, etc. selecting proper feeds and speeds. For mills, adjusts speeds and feeds in accordance with the milling calculator to maximize chip removal rate and carbide life. Adjusts saw feeds and speeds per the charts and as per the procedure for blade 'break-in'. Maintains spare cutter(s) ready to install.
Performs preliminary Equi-tip tests and final Brinell hardness tests as required.
Performs final dimensional inspection of product and completes dimensional sketch as required.
Performs final saw cuts to length tolerance.
What You'll Need:
A High School Diploma/GED.
A problem-solving mentality and high level of attentiveness.
A clean criminal background investigation.
A clean urine and hair follicle drug screening, performed upon offer of employment.
A strong work ethic.
A willingness to learn.
A commitment to safety.
Vocational school training, related on-the-job machining experience, or a technical associate's degree preferred.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
Numerical Control Multiple Tool & Milling Machine Operator A
NC machine operators setup, operate and adjust numerous types of Numerically Controlled (NC) single and multiple tool milling machines, utilizing pre-planned control media and/or program documents to fabricate close tolerance, high quality parts from various types of metals.
Job Responsibilities include:
Employment in this position also requires finger manipulation, handling, lifting less than 10 pounds, standing, walking, contact with metals, exposure to noise and atmospheric conditions, and the use of personal safety gear for face/eye, hand/arm, ears and feet.
Prepare to set-up job (e.g., production orders, first lots, tool tryouts) or run previously set-up job by reviewing work order, tie-in sheets, operator's or setup documents, blueprints or CATIA plots.
Ensure that correct material (type and quantity) and tools or fixtures were issued and are free from visible defects.
Identify type of set-up required. Check machine set-up and/or parts completed by previous operator to determine progress on a job and ensure safe working conditions, as required.
Select machine accessories and holding devises (e.g., chucks, vises, turntables, templates, probes).
Verify that apparatus is in good condition.
Identify fixtures, shop aids, or templates to be built and fabricate as required.
Attach machine accessories, tools, fixtures (e.g. coolant lines, air nozzles, suction devises), shop aides, and gears using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes.
Retrieve and download CNC programs to machine controller using computing equipment and downloading from various servers/data bases.
Select and check cutting tools per program or CNC documents.
Ensure cutters are the correct type, length, diameter, radius, and are in good condition.
Load and unload cutters following program information or set-up documents, using tool holders, spindle tapers, hand tools (e.g. wrenches, mallets, spanners) and/or overhead cranes.
Set machine coordinates or index points per CNC documents, including cutter offset/compensations, tool heights, and probes, using controller keyboard, coax indicator or digital readout; height blocks, shims and edge finders.
Run CNC programs to machine rough and precision cut parts following NC documents.
Adjust machine settings (e.g. speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence, including; head, spindle, or wheel angles.
Perform minor editing of CNC programs per shop requirements.
Remove all sharp edges from part with a de-burring tool and/or file, as required.
Perform Statistical Process Control (SPC) functions as required.
Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment as required.
Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance, chips to ensure smooth operation.
Check work after completion of each operation in job and/or completed job to ensure parts are complete per drawing and that there are no defects (e.g., tool marks, mismatch, incorrect cutter finish).
Maintain personal and tool certifications, as required.
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Relocation Assistance Available
Yes. Available for eligible candidates, if authorized.
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. This is an hourly position governed by the IAM Collective Bargaining agreement. High school graduate or GED preferred.
This position must meet Export Control compliance requirements, therefore a United States Person as defined by 22 C.F.R. §120.15? "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Experience using precision measuring tools.
Experience as a machine operator, writing and editing CNC programs.
Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications.
Experience reading and interpreting assembly instructions or drawings.
Experience operating 3, 4, or 5 axis NC/CNC machine tools.
Capable of working with and around hazardous materials (while using the proper protective equipment).
Contingent Upon Program Award
Machine Operator (2Nd Shift)
Eaton Crouse-Hinds in Syracuse, NY is looking for a Machine Operator to work in our CNC2 department.
Perform a variety of machining operations using single or multi-spindle drill press and/or tapping machines (automatic and semi-automatic) and milling machines on various castings and parts of steel, cast iron, aluminum, brass, etc.
Duties include positioning parts into chucks, fixtures or loading machine; move selector levers for prescribed speeds; initiating machine cycle, removing machined part and check work.
Work involves highly repetitive machine operations such as drilling, milling, tapping, reaming, boring, facing, threading, counterboring, etc. Maintain setup (setups made by others).
Work from verbal instructions, method cards and job assignment tickets.
Operate sequence prescribed.
Check work with fixed gauges at prescribed intervals.
Remove chips from machines and move material to and from work stations as directed.
Perform a variety of similar and associated duties as required or directed.
Detect and report faulty machine operations, defective material and unusual cases to proper supervision.
Maintain work area and equipment in a clean and orderly condition.
Follow prescribed or standard safety regulations.
High school diploma or equivalent from an accredited institution
Must be legally authorized to work in the United States without sponsorship
No relocation benefit is offered for this position. Only candidates residing within the immediate geographic area of Syracuse, NY will be considered for this position
Experience working in a manufacturing or production environment
Experience working with tapping, milling, and/or drill press machines
Moderate physical effort, equivalent to continuous light, frequent average or occasional heavy manual effort applied in various ways in performance of job duties.
Ability to use and read fixed gauges not requiring interpretation.
Able to read, write, perform simple addition and subtraction, follow simple directions.
Screw Machine Operator
New exciting opportunity with great pay and benefits! Looking for a CNC Machinist to join our Genoa City team. This individual will be responsible for maintaining and operating CNC machines and will be trained in operating automatic screw machines.
Hourly Rate + Benefits + Paid Time Off
Benefits Include: Health care, dental, life insurance options, short-term disability, 401K, etc.
Education: Requires a high school education or GED, trade school a plus
Experience: 2+ years of general machining experience
1.Install and adjust cams, gears and stops to the screw machine and verify the positioning of cutting tools by using gauges and/or other instruments.
2.Stock and load the screw machine, keeping it filled with proper oil levels, cutting fluids or lube and keeping the machine free of chip build-up.
3.Operates control console checking work position at specified reference points, interprets part drawings and uses required precision inspection instruments to inspect work maintaining tolerance requirements throughout the process
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.
Job Description: Are you an energetic and dependable employee that takes pride in your craft? Would you like to be part of a dynamic and growing aerospace manufacturing business in Savannah, GA? Arconic Forgings and Extrusions (AFE) is looking for qualified Machine Operator (Machining)s at our Savannah, Georgia location. Our organization is dedicated to rapid, profitable growth through continuous capital investment, operational excellence and career development. Arconic is a company that promotes and develops from within with worldwide opportunities. If you are interested in a career with our facility, where our business has doubled in revenue in first five years of existence, we encourage you to apply.
Arconic Forgings and Extrusions (AFE) serves the global aerospace and automotive markets with the most specialized engineering, highest quality, and the greatest breadth and depth of extrusions and forgings in our industry. Headquartered in Cleveland, OH; AFE employs 3,400 people in 5 countries at 16 locations. AFE is a business unit of Arconic (NYSE:ARNC).
Company Benefits: We offer eligible employees a comprehensive benefits package designed to assist employees and their families with financial security, health and well-being. In addition to competitive pay, we off a variety of benefit programs.
Medical, Life, Dental and Vision Plans
401(k) Program with a Company Match (up to 6%)
Retirement contribution (3%)
Performance Pay based on company results (up to 5%)
2 weeks' annual vacation accrual
10 annual paid holidays
Employee discount programs
Position Profile: The Machine Operator (Machining) operates various manual and CNC machines needed to produce a wide array of sonic turbine discs and dies that meets or exceeds our customer's specifications.
Essential Functions: This is a representative summary of the major duties and responsibilities, and is not all inclusive. Incumbent(s) may and may be required to perform additional, position-specific tasks.
Layout work from blueprints, work orders, and other specifications.
Set up jobs on a variety of parts and maintain specified overall tolerances.
Maintain dimensional accuracy during machining process using precision measuring instruments such as veneer calipers, micrometers and gauges.
Application of shop mathematics to perform accurate job set ups on a variety of machine tools. More advanced set ups may require more advanced mathematical applications such as geometric and trigonometric formulas.
Calculate machine speed and feed ratios and the size and position of cuts.
Use chip cutting principles (tooling selection/control, feeds and speeds, use of inspection gauges, etc.) to efficiently and safely machine discs into prescribed tolerances/dimensions.
Mount, install, align, and secure tools, attachments, fixtures, and work pieces on machines, using hand tools and precision measuring instruments.
Adjust machine feed and speed, change cutting tools, or adjust machine controls when automatic programming is faulty or if machines malfunction.
Insert control instructions into machine control units to start operation.
Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Regular attendance is an essential function of the position.
Performs all other duties as assigned.
Ability to work various shifts that support a 24/7 operation
Must be able to learn and follow company procedures and work instructions.
Maintains a safe and organized workstation and follows all company policy, safety and procedures.
Production and Processing — Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Operation and Control — Controlling operations of equipment or systems.
Operation Monitoring — Watching gauges, dials, or other indicators to make sure a machine is working properly.
Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
Reading Comprehension — Understanding written sentences and paragraphs in work related documents.
Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Speaking — Talking to others to convey information effectively.
Troubleshooting — Determining causes of operating errors and deciding what to do about it.
Basic functions of Microsoft Office Suite.
Ability to operate a forklift and man lift to O.S.H.A approved standards.
Continuously required to wear common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats.
Continuously required to stand; walk; use hands to handle, or feel; reach with hands and arms; and talk or hear.
Frequently required to stoop, kneel, crouch, or crawl.
Frequently required lift and/or move up to 50 pounds.
Occasionally required to sit.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Nickel and titanium manufacturing facility. Exposure to: moving mechanical parts; wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; extreme cold, extreme heat, vibration; loud noise level
High School Diploma/GED from an accredited institution
Minimum 1 year experience measuring parts using various inspection tools (calipers, gauges, micrometers)
Minimum 1 year experience setting up and operating manual machines, including; lathes, mills, saws drills, etc.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S> person as an U.S. Citizen, U.S> Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
1+ year experience from work in a manufacturing environment or from a technical or craft certification program
Previous military and/or mechanical experience related to hydraulic maintenance is a plus.
Machine Operator - Abrasive Belt Press Operator - 1St Shift
- Knowledge / Skill / Experience
.1. Possesses basic mechanical skills
.2. Basic mathematical skills (measurements, standard, metric)
.3. You must be able to stand for a minimum of 8 hours per day and also have excellent use of your hands.
Tortilleria Machine Operator
The tortilla machine operator provides customer satisfaction by operating and caring for equipment used in the tortilleria department, including the tortilla manufacturing machine (tortilla maker), mixers and fryers, making sure there are plenty of delicious flour and corn tortillas, tostada shells, duros, tortilla chips and masa for customer purchases.
Some Job Responsibilities include:
Operating and maintaining tortilla making machines, conveyor belts, mixers and fryers.
Engaging with customers through smiles and greetings, offering product information and always giving a genuine thank you.
Mixing masa for tortilla products.
Manufacturing and packaging tortillas and snack items like toasted tortilla chips and duros.
Ensuring all manufacturing and cooking facilities meet proper food safety and member safety guidelines.
Maintaining adequate stock levels to ensure adequate production of tortilleria products.
Merchandise tortilleria products on shelves, merchandisers and floor displays.
Maintaining a positive and friendly attitude towards customers and fellow team members.
Understanding proper product preparation, roasting and merchandising techniques and procedures,
Keeping clean neat and orderly work areas, including a well swept production area.
Performs other duties as needed or assigned by management. Must be at least 18 years old.
Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time;
This description reflects management's assignment of essential functions; it does not proscribe or restrict the tasks that may be assigned;
This job description is subject to change at any time
Employer provides reasonable accommodations to a qualified employee that does not impose an undue hardship on the employer.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!