Churn Tender Job Description Sample
Tender II - 11981
Oceaneering is a global oilfield provider of engineered services and products primarily to the offshore oil and gas industry, with a focus on deepwater applications. Through the use of its applied technology expertise, Oceaneering also serves the defense, entertainment, and aerospace industries. Oceaneering's business offerings include remotely operated vehicles, built-to-order specialty subsea hardware, deepwater intervention and manned diving services, non-destructive testing and inspection, and engineering and project management.
The Tender is assigned by the Diving Supervisor or designated diving person in charge. Performing sub-sea tasks and assisting the Diver when necessary.
Duties & Responsibilities
Provides topside support for diving operations.
Perform maintenance and repair of topside equipment and DDC operations.
Perform topside and underwater rigging.
May be required to perform sub-sea tasks utilizing commercial diving equipment.
Knowledge of equipment uses, repairs, and maintenance is needed.
Assist the diver in dressing, entering and leaving the water, and undressing
Confirm that the diver's equipment is functioning properly and inform the diving supervisor that the diver is ready.
Prepare and support the dive until its completion.
Support any in-water decompression as required.
Tend the diver's umbilical (keeping at least one hand on the umbilical at all times) and be aware of the diver's depth and location at all times.
Set up and operate all equipment as directed by the diving supervisor, D/T or his or her representative.
Perform routine cleaning and maintenance on diving equipment.
Repair such equipment as he or she is qualified to check-out to repair.
Assist in topside work as required or directed.
Be alert for and immediately report conditions that may be hazardous or unsafe.
Maintain certification in first aid and CPR.
Properly operate a decompression chamber as required for decompression or treatment as directed.
Maintain communication with the chamber occupants.
Properly complete all paperwork as required by employer policy and/or governmental regulations.
Do not perform any other task while operating the chamber.
Perform tasks as a diver or standby diver when directed by the supervisor. A tender/diver who dives shall be subject to the duties and responsibilities of a diver within the limitations of his or her assignment.
When required, ride the chamber with the diver during decompression or treatment. This inside tender/diver must be familiar with and alert for the symptoms of oxygen toxicity.
Report to the diving supervisor any recent medical treatment or illness so that a proper determination can be made concerning fitness and/or ability to dive.
Immediately report all symptoms or suspected symptoms of DCS to the diving supervisor as early and accurately as possible.
Report to the diving supervisor any defect or malfunction of the diving equipment provided for the diving operation.
Maintain a commercial diver log book documenting all hyperbaric exposures.
Read, understand and comply with all employer's policies and applicable governmental regulations, as they relate to their qualifications or performance while engaging in diving operations.
High School Diploma or General Education Degree (GED).
Hold a commercial diving school certificate of graduation.
Entry-level with zero (0) to six months minimum experience.
Must be able to obtain a valid Passport and Transportation Worker Identification Credential (TWIC).
ADCI diver card.
- EMT/DMT certifications.
- IMCA certification or Board of Canada (DCBC) qualified.
- NDT certifications.
- U/W welding, mechanical expertise (including hydraulics, diesel, gasoline).
This position is considered OFFSHORE WORK which is characterized as follows.
Outdoors and indoors, day and night, as well as over/near water.
Requires working on or near moving equipment and vibrating equipment.
Frequently the humidity is above 90%, noise is over 85 decibels and the light is intense/glare.
Potential exposure to open fire/flames/sparks.
Constant exposure to airborne dust, fumes, and gases.
Work surface is stable, height is elevated.
This position is considered HEAVY work.
Equal Opportunity Employer
All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors.
Characteristics of Work Benefits Supplemental Questions
This is entry level semi skilled work in the raising and lowering of manually controlled drawbridges. Job duties involve the monitoring of boat and automobile traffic to ensure the safe clearance of marine vessels, the manual operation of various mechanical components of the drawbridge, and the recording of pertinent data regarding bridge operation and related radio transmissions.
The work is learned through on-the-job training and is performed in accordance with standard procedures. Instructions are received from a DOT-Bridge Tender Senior or other immediate supervisor.
Examples of Work:Examples of work performed in this classification include, but are not limited to, the following:
Listens and watches for signals from boats to anticipate approaching marine traffic.
Receives and issues calls using a two way radio telephone to determine passage requirements of marine vessels.
Opens and closes drawbridge by operating various levers, switches, and knobs; stops all land traffic by operating safety gates and traffic signals.
Completes required forms on a daily basis, recording data on the date and time of opening and closing the bridge; name and description of passing boats; date, time and subject of bridge to vessel radio communications; and a brief description of any problems encountered.
Performs related or similar duties as required or assigned.
These minimum qualifications have been agreed upon by Subject Matter Experts (SMEs) in this job class and are based upon a job analysis and the essential functions. However, if a candidate believes he/she is qualified for the job although he/she does not have the minimum qualifications set forth below, he/she may request special consideration through substitution of related education and experience, demonstrating the ability to perform the essential functions of the position. Any request to substitute related education or experience for minimum qualifications must be addressed to the Mississippi State Personnel Board in writing, identifying the related education and experience which demonstrates the candidate's ability to perform all essential functions of the position.
Graduation from a standard four year high school or equivalent (GED or High School Equivalency Diploma).
Any combination of education and experience equivalent to twelve (12) years of related experience.
Essential Functions:The essential functions include, but are not limited to, the following. Additional essential functions may be identified and included by the hiring agency.
1.Provides safe operation of manually controlled drawbridges.
2.Monitors state and marine radio transmissions.
Roll Tender (40903)
Load rolls of paper onto automatic splicing unit of web offset printing press. Inspect rolls of paper for blemishes or tears and cuts away damaged area with knife.
Roll paper into loading position on automatic splicer, insert shaft of automatic splicer through roll core, secure holding chucks of automatic splicer to shaft ends, and thread paper through press components to prepare press for printing. Apply adhesive strip to backup roll and insert backup roll onto automatic splicing unit of press to prepare paper for automatic splicing. Remove roll of leftover paper from press after automatic splicing.
May operate mechanical truck to transport rolls of paper to press area. May assist with some of the make-ready tasks associated with the type of press operated such as hanging plates, examining plates, prepping and installing blankets, adjusting tension etc. May clean press and clean and install press components to maintain press in working order. May prepare and prepares and loads flat stock into a sheet fed press.
Requires general knowledge of offset presswork procedures and materials. Ability to read and follow job specifications to determine materials needed to run the job successfully.
Ability to make adjustments to auto splicer. Knowledge to load paper and prepare slice for continuous operation of the press. Knowledge of materials and requirements for press.
RRD is an EEO/AA including Vets and Disabled Employer
Lead Bud Tender
SUMMARY: This position provides Spectacular Service to all store guests and is responsible for positive and knowledgeable interactions focused on customer service and information sharing. Assists in the on-going training of store personnel.
DUTIES: Completes retail sales transactions (credit card and point of sale) in compliance with established policies and procedures.
Possesses a strong level of telephone etiquette. Assists in training store personnel on all aspects of position. Demonstrates knowledge of cannabis products and strains to include Sativa, Indica and Hybrids.
Assists in the creation of work schedules to support the store's level of business. Provides recommendations regarding appropriate usage and dosage based on method of consumption. Updates management regularly on potential issues and communicates guest recommendations.
Works with management to ensure the retail store is in compliance with all applicable regulations, specifically with security and inventory procedures. Demonstrates an understanding of regulatory compliance and upholds all policies and procedures unique to the industry. Actively promotes spectacular customer service and aides in creating a welcoming atmosphere.
Promotes a professional demeanor in all interactions and transactions. Responds to guest's questions regarding flowers, strains, creams, oils, waxes, concentrates, edibles, tinctures, vape/e-pens. Stocks product and may be asked to assist with ordering in the absence of management. Actively identifies areas for cost savings.
QUALIFICATIONS: Must be 21 years of age and possess a valid State of Washington Driver's License.
Experience and/or education in the cannabis industry to include store product knowledge. 1-2 years supervisory experience, preferred. High school diploma or GED, required.
Tender Manager is responsible for providing tactical and strategic support of regional and global Transportation proposal activities to ensure consistency and alignment with corporate directives and local/regional requirements.
• Monitor and prioritize all activities with teams related to current and upcoming bid activities.
• Work with bid teams to compile and deliver required content and pricing related to transportation bids to meet timeline expectations
• Coordinate pricing requirements with the procurement teams in region and zone countries
• Proactively engage and liaise with sales managers, BDMs to develop integrated and professional Transportation solution bundle (process, systems, commercial)
• Work with regional and country managers to establish strategies to be pursued in our bids
• Evaluate results of our bids and give a monthly report analysis of our bid activity and strengths/ weaknesses
Minimum 3- 5 years of experience in the transportation industry
Minimum 3 years of experience in bid management or project management role
Graduate degree / Bachelor required preferable in the field of Transportation or Supply chain with specialization in Transportation
Highly Proficient in MS office platforms, Advanced in Excel is a must (Macro, Pivot table and advanced formulas)
Knowledge of Transportation Operations Platforms, Distribution and Transit/Cross-Dock, Import and Export.
Remove, flex, jog, and stack printed sheets, folded signatures, labels or other in-process product from discharge unit of printing press or adhesive coating equipment.
Review signatures for smearing, register issues, bad folds, etc. and notify the Pressroom.
Remove folded signatures from web press and place signatures on pallet or skid for removal to warehouse or binding areas. May adjust stacking mechanism on press according to paper dimensions.
Loads and unloads materials onto or from pallets, carts and trays. Conveys materials from storage or work sites to designated area, using hand truck, electric dolly, or other devices.
Counts, weighs, and records number of units of materials moved or handled on daily production sheet.
Attaches identifying tags or labels to materials or marks information on cases, bales, or other containers.
May assist Press Crew with make-ready of the equipment such as retrieving plates, hanging plates, recycling/storing plates etc.
May perform in process quality checks of printed materials looking for blemishes, scratches or other print defects.
Good knowledge of general warehouse layout, item identification codes, basic warehouse procedures, and the storage areas in order to be able to place or pull paper stock, signatures and materials in accordance with standard procedures.
May require knowledge of operation of automatic counters and tabulate counts for jobs.
Able to complete appropriate forms relating to stock description, quantity, unit of issue, and the labeling requirements for incoming and outgoing materials.
Good skill in the use of manual dollies, carts or hand trucks and hand tools used in material handling tasks such as hammers, pliers, strapping and stretch wrapping tools and equipment, tape fasteners, metal band sheers and related equipment.
Requires general knowledge of offset presswork procedures and materials.
Ability to read and follow job specifications to determine materials needed to run the job successfully.
Ability to make adjustments to auto splicer. Knowledge to load paper and prepare slice for continuous operation of the press. Knowledge of materials and requirements for press.
Finish Line Tender (1St Shift) (1426-056)
Knoll is a constellation of design-driven brands and people, working together with our clients to create inspired modern interiors. Since 1938, we've been thinking about how people interact with their environments, and how their environments impact what they do. Our strength in office systems, seating, furniture, textiles, leather, architectural accessories allows us to compose integrated solutions from products and services that naturally work together.
To learn more, visit www.knoll.com
This is a first shift position.
This position is responsible for visually inspecting all raw and finished product, loaded and unloaded, on the finishing systems against established quality criteria.
ESSENTIAL JOB RESPONSIBILITIES:
Visually inspect all raw and finished product, loaded and unloaded, on the finishing systems against established quality criteria
Load and unload paint system according to paint schedules
Use designated equipment to check finished quality of painted parts against established quality criteria
Maintain accurate records of product loaded, unloaded and rejected from the paint system
Unload and present product in a manner acceptable to the trim areas
Read and understand part tags and catalog numbers
Clean and maintain load and unload areas
Transport stock to and from work area
Perform all duties within established ISO and safety policies and procedures
Performs all 5S housekeeping tasks in appropriate areas. Works to ensure work area is maintained in a clean, orderly and safe condition at all times
Participates as a member of the Finishing Team
- High school diploma or equivalent required
Will be required to cross train on critical finish department positions for coverage purposes
Must be able to work in a team environment and be part of the rotation of all the load and unload positions
Must pass color test
May be required to receive additional education and attend seminars for related training
Experience in a manufacturing environment required
Working knowledge of lean manufacturing techniques, principles, and tools preferred
The Tender Manager will be responsible preparing professionally compiled tenders for the scope around Data Center Infrastructure including electrical distribution, power monitoring, and control. The candidate will need to have a good understanding of finance and legal contracts. The primary function of the position is to work closely with sales, operations, technical teams, quotations, risk management and legal personnel to confirm positive business opportunities, prepare professionally compiled assessments to limit commercial and project execution risk, and accurately cost and price the scope of work for each project opportunity.
What do you get to do in this position?
Establish processes for tender management lifecycle
Enhance scope detail to prevent any confusion on project requirements
Identify escalation committee and escalation processes for presenting risk of project tenders to leadership
Interface with technical experts to identify scope and risk
Ensure contracts are reviewed and marked up by appropriate parties
Review scope of work and formulate cost estimate for internal and external group content with help from quotation teams and suppliers
Lead the tendering team to develop the customer proposal that meets or exceeds the customer's requirements
Work with the tendering and execution teams to develop the estimated timeline an execution plan for the project
Drive "lessons learned" regarding the tender and contract management processes
Finance and contracts knowledge and experience recommended
Sales, project negotiation, or customer management experience recommended
Technical experience in power, IT or monitoring/control in a data center environment is a plus
Five to ten years of relevant experience is recommended
OverviewKIK Custom Products Houston
Machine Tender Company Overview As one of North America's largest independent manufacturers of consumer packaged goods ("CPG"), KIK helps a large portfolio of brands and retailers bring their products to life. With leading positions in the multibillion household and personal care, over-the-counter, and pool additives categories, we maintain close relationships with over 70 global CPG customers and virtually every relevant major North American retailer. We have full-service capabilities covering end-to-end contract manufacturing, including project management, innovation and R&D, sourcing and procurement, blending and compounding, filling and packaging, supply chain and distribution, and quality control. Our manufacturing model is highly flexible and we consistently add value to our customers by leveraging our range of services and expertise. KIK has over 5,000 employees and operates 19 manufacturing facilities strategically located throughout North America and over $1 billion in sales; KCP (operating as KIK Custom Products) is one of North America's largest custom manufacturers of both National Brand and Retailer Brand consumer products. KCP's product lines include Laundry, Household Cleaners, OTC Medicated, Pharmaceutical and Health & Beauty Care, all supported by KCP's in-house technical expertise and value-added services. KIK Consumer Brands – Household Division Our Household Division ("Household") is the #1 player in North American private label bleach, and supplies private label cleaning programs to prominent American retailers. Although Household started as a small bleach plant in Concord, Ontario, we have since expanded to a network of 8 plants strategically located across the United States to efficiently manufacture a variety of cleaners for both hard and soft surfaces. . In addition to its private label portfolio, Household manufactures and markets Greased Lighting® and The Works® branded products Essential Job FunctionsResponsibilities
Possess the necessary skills to operate a filler along with but not limited to labelers, cappers, palletizer, case erectors, heat induction sealers, etc.
Coordinate with Filling Master Operator line lead to ensure the right product is being ran
Ensure raw materials (corrugate, caps, hot melt, bottles, and labels) are staged on line.
Ensure bottle code is correct
Perform basic troubleshooting on the assigned equipment.
Perform packaging equipment size changeovers on assigned equipment.
Perform start-up / shutdown procedures on assigned packaging equipment
Perform wash down procedures on assigned packaging equipment
Perform finished product and finished case on-the-line quality checks per KIK Manufacturing Quality Standards protocol
Perform clean-up duties throughout the shift and post shift.
Attend required safety meetings and participate in safety related programs when needed.
Perform other duties assigned as required.
Correct safety violations and write work orders.
Be responsible for the safety and housekeeping in the immediate work area.
Comply with Good Manufacturing Practices, Standard Operating Procedures, Safety Standards, and follow all plant policies and procedures. Qualifications Qualifications
Machine Operator experience in a Packaging/Filling industry
Production knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
Mechanical knowledge of machines and tools, including their designs, uses, repair, and maintenance
Basic Mathematics skills of arithmetic and statistics, and their applications Working Conditions
Possibility of working around unpleasant odours.
Working in non temperature controlled environment
Possibility of working around high noise levels, depending on location.
Constant interaction with a variety of chemicals and chemical products.
Must be able to lift 45lbs.
Must be able to work overtime where necessary.
Must be able to work in accordance with Health and Safety and GMP regulations. A Career with KIK Offers: KIK offers very competitive salary and comprehensive benefits including health, wellness, dental, vision, life, and disability insurance. You can plan for your future with KIK's retirement savings options including employer match. KIK also recognizes the importance of continuing education and offers Education Assistance to our employees to encourage continued personal development and growth. Thank you for your interest and consideration of a position with KIK Custom Products. KIK is an Equal Employment Opportunity / Affirmative Action employer. Qualified applicants will receive consideration for employment without regards to race, color, religion, sex, or national origin.
Truck & Tap is a new beer bar concept that opening our third location in Downtown Duluth early this Fall. We have a rotating selection of craft beer from around the world, along with wine, and wine/beer-based mixed drinks. Our kitchen is provided by a rotating food truck. This is a fantastic opportunity to get in on the ground floor and grow with the company.
We're slated to begin training in August.
- Must be legal drinking age.
- Positive outgoing attitude.
- Passion for craft beer and improving your knowledge of craft beer.
- Weekend, night, and holiday availability.
- At least one year of service experience
- Must be able to move 161 pound kegs
- Must be able to lift 50 pounds
- Must be able to traverse stairs
- Must be able to be on your feet for upwards of 10 hours
Job Description and
You will be interacting with and serving customers drinks in a laid back, fun environment.
Additional Responsibilities include:
- Staying up-to-date with our ever-changing craft beer menu to make educated suggestions for customers based on their tastes and food choices.
- Following recipes for mixed drinks
- Bussing tables
- Cleaning throughout the day.
- Occasional shifts in our small scale kitchen, paid hourly.
Full and part time positions open with shift pay + tips.
INCLUDE COVER LETTER EXPLAINING YOUR INTEREST IN CRAFT BEER OR YOUR APPLICATION WILL BE REJECTED
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!