Circle Cutting Saw Operator Job Description Sample
Concrete Cutting Operator - Eugene Area, OR
American Concrete Co. (ACC), a division of Hamilton Construction Co. based in Coburg, OR, is looking for Concrete Saw Operator. American Concrete has been in business for more than 30 years and is reputable, respected and licensed in all Western States.
We supply our operators with an equipment yard, well-maintained equipment, office, a safe work environment, and technical training and support. The ideal candidate will be:
Willing to learn to perform flat sawing, core drilling, hand sawing and wall sawing.
Must possess a valid driver’s license and have a clean driving history.
Pass a required pre-employment drug screen. (Background check and other testing may be required on certain projects. )
Ability to work days/nights/weekends or out of town if necessary.
Ability to use heavy equipment and wear safety gear. Desirable but not required:
CDL or the ability to get one. Applicants serious about building a career with one of the leading concrete companies in the Pacific Northwest are welcome to apply. ACC has three locations (Main office/Coburg, Portland, OR and Redmond, OR) so if you have a preference; please state that on your application.
All applicants please send resume with references, or a note describing your experience to General@AmericanConCo.com or by fax 541-726-8146. For more information and to fill out an application online, please visit our website: www.AmericanConCo.com This is a full time position, offering a high competitive compensation package ($12 - $25/hr. depending on experience), including health insurance and retirement plan. Thank you for considering our opportunity.
We are an equal opportunity employer. Women, minorities, veterans, and individuals with disabilities are encouraged to apply
Die Cutting Assistant Operator
Must have high school diploma, G.E.D, or equivalent.
Must have basic computer skills – computer inputs.
Must be able to lift and carry a minimum of 40 lbs.
Must be able to stand for a continuous 8 hour period.
Must have the ability to read and interpret documents such as safety rules, job tickets, operating and maintenance instructions, and procedural manuals.
Must be able to perform basic arithmetic including addition, subtraction, multiplication and division.
Must be able to maintain good attendance.
Must be willing to work overtime as needed.
Assist in the set up of job according to job ticket instruction and approved structure.
Reviews job tickets for specifications, make-ready time, run speed, die information, quantity, ship date and any special instructions.
Assist in the running of equipment at the required speeds while maintaining quality, waste and safety standards.
Follows all standard operating procedures relevant to job, position and department.
Assist in properly documenting production and quality inspections per Diamonds Standard Operating Procedures.
Monitors production schedules checking for current job and next scheduled job to assure all resources are available.
Assists in the troubleshooting and solving of operating problems on the die cutter(s).
Verifies Die Cutting Operator has the proper materials.
Plasma Cutting Operator
We are seeking a Plasma Cutting Operator to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms.
- Manufacture and fabricate finished metal products
- Install and repair various equipment and components
- Follow blueprints to meet product specifications
- Calculate material measurements to verify specifications
- Conduct tests to evaluate weld quality and tolerance
- Previous experience in Plasma Cutting, manufacturing, or other related fields
- Familiarity with Plasma tools and procedures
- Familiarity with engineering blueprints and schematics
- Ability to handle physical workload
As one of the largest custom and diverse precision machine/fabrication shops in the southeast, CBM offers a full line of CNC Milling, CNC Turning, fabrication, welding, painting, sandblasting, assembly, and repair services for large parts. Our facility includes 22 overhead cranes with a lifting capacity of up to 100,000 lbs. CBM currently operates 20 hours per day to accommodate our customers needs. CBM is ISO 9001:2008 certified, and woman owned!
Our highly trained staff of Engineers, Machinists, Painters, Quality Technicians, Assembly Technicians, and Fabrication Specialists will ensure that our customer specifications and expectations are met and exceeded. Our engineering department is capable of reverse engineering parts, and creating CAD drawings upon request. CBMs chief objective is to provide quality parts promptly to the leading manufacturers of North America!
Laser Cutting Machine Operator
Immediate opening for qualified laser cutting machine operator .
Must be skilled in blueprint reading , (both metric and U.S. standard) must be knowledgeable in tolerance interpretation.
Must be able to proficiently use precision measuring instruments . Micrometer, calipers, tape measure, dial indicator, etc.
Being familiar with Fanuc controls is a plus.
Must have at least 1 year experience in laser operation and daily laser maintenance .
Salary will be based on experience .
Laser Cutting Operator
Requisition Number 18-0010
Post Date 1/5/2018
Title Laser Cutting Operator
Shift Various Shifts
Company O'Neal Steel
Description CNC Laser Cutting Table Operator - O'Neal Steel
One opening for each shift (1st, 2nd & 3rd) After more than 90 years in business, O'Neal Steel is now the United States' largest family-owned metals service center supplying carbon and alloy steel, stainless and aluminum products for companies nationwide. That's an important distinction because it means the family who started the company, and has guided its growth, continues to instrumental in its operation today. Customers ranging from small job shops to major manufacturers have come to rely on O’Neal as their one-stop shop for a vast inventory and complete range of steel products, available for quick delivery through our national network of distribution facilities. As a third-generation family-owned business, we remain committed to the principles of our founder – and the success of our customers. O'Neal Steel, one of the nation's largest metal service centers has an opening for a CNC Laser Cutting Table Operator. We are looking for a highly motivated and hard working candidate that will be responsible for the daily set up and operation of the machine. Set up and operation includes adjustment and/or replacement of expendable tooling, guides, jigs, and fixtures. Employees in this classification will typically operate one or more of the following machines:
Operate angle line machine
Operate a flame beveller
Operate a saw
Operate a shear
Operate a burner
Operate a laser
Operate a press brake
Operate a rolling machine
Any other activity that might be required of the employee as any given time
To qualify for consideration, an applicant must possess the following skills. Possession of these skills is a prerequisite for employment.
Minimum of 2 years of experience involving Laser cutting experience, the making of fixtures, set up and changeover.
Ability to read and interpret simple blueprints and geometric tolerances.
Organize parts and prepare them for the next process.
Operator must be capable of operating other equipment as required fro the fabrication of various parts.
Ability to use a variety of hand tools such as: hammer, pliers, screwdriver, wrench, drill, grinder, bander.
Ability to use measuring tools such as: tape measure, box caliper, slide dial caliper, and micrometer.
Ability to convert fractions to decimals and vice versa, add and subtract in fractions and decimals.
Responsible for producing quality parts in the most productive manner while following safe work practices.
Must be able to concentrate and maintain productivity in high pressure situations.
Must be able to work without close supervision.
The following skills are considered important to this position but may be learned on the job. Applicants will not be eliminated from consideration if they do not possess these skills.
The ability to operate any piece of metal working equipment.
Ability to operate forklift and/or overhead crane
Education: Machine Technology Certification preferred.
Shift: One opening for each shift. 1st Shift (6:00AM-2:00PM) Monday-Friday, Overtime will be required as needed.
2nd Shift (2:00PM-10:00PM) Monday-Friday, Overtime will be required as needed.
3rd Shift (10PM-6:00AM) Sunday-Thursday, Overtime will be required as needed.
Benefits: O'Neal offers a competitive salary and a comprehensive benefits package including, but not limited to:
Health, Vision and Dental Insurance
Work site Wellness Programs
Health and Dependent Care Flexible Spending Accounts
Short-Term and Long-Term Disability Coverage
Tuition and Health club Reimbursement
Accidental Death and Dismemberment and Life Insurance
Metlife Auto & Home Insurance Program
Training and Development Opportunities + 401k and Profit sharing - - -
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities.
Please view Equal Employment Opportunity Posters provided by OFCCP here at http://www.dol.gov/ofccp/regs/compliance/posters/ofccpost.htm .
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have accessto the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosureis (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41CFR 60-1.35(c)
Cutting Department Technician/ Machine Operator
We are seeking a Cutting Department Technician/Machine Operator to join our team! You will be responsible for make-ready, operation, and cleaning of die-cutting machine.
Selects, installs, and adjust specified cutting die on press bed, sets up stripping mechanism
Directs crew during regular cleaning and maintenance of cutting machinery
Verifying that product is in compliance with customer specifications
Prepares daily time, production, usage, and quality control reports
Must have industry related skills, knowledge of operation of cutting machinery, and experience.
Must demonstrate high degree of attention and care to prevent damage to precision machinery
The ability to handle physical work load
Strong work Ethic
Youngshin Die Cutting Operator
We are looking for a YoungShin Die Cutting Operator to join our team!
SHIFT: 2nd shift – 2:30 PM – 10:30 PM
DUTIES and RESPONSIBILITIES:
Set up and run required jobs.
Have necessary knowledge of required hand tools, and be able to measure in fractions of inches up to and including 32nds.
Maintaining standard of quality.
Report any problems and/or discrepancies to the shift supervisor.
Keep work area clean and orderly.
Available to work overtime, weekends, holiday and other shifts when needed.
Performs other tasks as requested.
Ability to stand for 8 or more hours.
Ability to lift up to 50 lbs.
Ability to visually inspect all work for defects.
SKILLS AND KNOWLEDGE:
High School/Technical or equivalent experience.
1 year die cutting experience on any material.
Large Format Die cutting experience a plus.
Ability to communicate/understand written as well as oral instructions.
Thorough understanding of finishing bindery equipment operation.
Ability to apply written instructions to machine set-up.
Basic Math skills including skills including addition, subtraction, multiplication and division.
Classic Graphics holds the following certifications:
o* ISO 9001:2008 - Manufacturing
o* ISO 27001 - Information Security
o* G7 Master Printer
o* Forest Stewardship Council
Die Cutting Operator - Clam Shell, Brausse, Kluge
Litho Tech is seeking an experienced die cutter operator that will be responsible for the set-up and operation of our Clam Shell, Brausse and Kluge die cutters.This position requires knowledge of die cutting and experience in setting up and running die cutting equipment and producing high quality die cut work.S Spe SPECIFIC RESPONSIBILITIES
Read and follow specific job instructions and produce order according to specifications and deadlines
Follow all safety requirements
Meet standards in quality, production, waste, attendance, and core values
Maintain equipment - daily and periodic cleanings Maintain accurate records of material usage in Hagen
Possession of high school diploma or equivalent (GED) is preferred + 2 years of related experience operating a Kluge, Brausse or Bobst die cutter.
Efficient machine set-up and run ability
Produce high quality work consistently
Work well with others and independently
Meet deadlines while working under pressure Work flexible hours, overtime if needed
Gerber Operator ( Cutting Machine Fabric)
Responsible for assisting in the performance of a variety of tasks related to cutting products related to sewing operations in support of garment prodcution
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Off-loading the gerber of cut fabric
Loading carrousel of stock fabric rolls
Operating the Dell Tech pattern software to retrieve markers
Packaging of cut work directly off the gerber
Management of scrap fabric
Adheres to all quality and safety standards
Supports other projects and performs duties as assigned
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Performs all work in accordance with safety and workmanship and good housekeeping specifications
Frequent lifting of up to 50 lbs.,
- Ability to climb ladders, bend, kneel, work overhead with arms, and sit or stand for several hours at a time
- Must be able to wear protective apparel including safety glasses, safety shoes, and gloves
- Eye/hand coordination required, with steady and agile hands to operate equipment and tools
- Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus
EDUCATION: High school diploma or GED Required
651 Orchard Street, Suite 106
New Bedford, MA 02744
Steel Plasma Cutting Machine Operator
National manufacturer requires experienced, reliable, dedicated automotive or machinery trained person. Position is Plasma Steel Cutting Machine Operator. Welding experience helpful. Will train individual with some computer aptitude. Full time position with full benefits. North Kingstown, (Quonset) Rhode Island location.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!