Coater Job Description Sample
Reading prints and masking off coating area.
Coating material to required specification.
Keeping a log of work preformed.
Upkeep and sanitation of coating PPE.
Upkeep of ventilation filters and filter change log.
Daily inspections of CO2 monitor.
Other duties as assigned, directed, requested, or needed.
Must be able to work outside in both winter and summer.
Must be medically qualified to wear respiratory equipment.
Must be able to pass a pre-employment physical and drug screen.
Must be able to stand for 8 hours per day.
Must be able to lift 50lbs.
Must be able to read a tape measure.
- High School Diploma Preferred
Coater Technician (PM Shift)
We currently have an opening for a friendly, team and goal oriented individual to join our Manufacturing Team in the position of Surface Coater Tech. The Coater Tech receives, sorts, and prioritizes work as it enters the coating area. The Coater Tech will also perform visual inspection of the lens before and after coating to validate lens surface; as well as clean and secure lens on control arm, remove lens and wiping excess water off spindles. Additionally the Coater Tech will verify air jets are properly aligned and checks both water and coating levels and perform general daily and weekly maintenance.
Prioritize tray processing as dictated by tray color.
Perform lens visual inspection before and after coating to validate lens surface.
Check air jets for proper alignment, check water and coating levels, refill as needed.
Ability to communicate and escalate with peers and principles.
Run coating prime, check coating dispense height
Ensure and maintain the cleanliness of all equipment, workstations and overall facility.
Practice and comply with all requirements of our Quality Management System (QMS), as well as regulations promoting a safe and healthy work place environment.
Education, Experience & Background:
High School Diploma, GED, or equivalent work experience preferred.
One to three (3) years of related manufacturing experience preferred.
Able to read English to understand written procedures, hazardous warning, etc.
Ability to think logically in following procedures and instructions
General problem solving abilities
If you are prohibited from working on a government contract, this may disqualify you from consideration for this position.
Visionworks provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religious beliefs, sex, gender, sexual orientation, age, marital status, national origin, ancestry, physical or mental disability or history of disability, genetic information, status as a protected veteran or disabled veteran, or any other status protected by Federal, state or local law.
Low Observable Coater - Speciality Painter
Job Description: :
This occupation requires robotic and manual application of special technology coatings to produce aircraft, parts and assemblies with low-observable characteristics.
Reads and interprets laboratory, engineering and manufacturing process specifications and plans sequence of operations for finish applications on low-observable aircraft, parts, assemblies and test articles. Determines methods, tools, operations and sequences necessary to apply, rework, or repair aircraft structural coatings and finishes requiring ingenuity in developing new procedures or in deviating from standard practices to meet special requirements.
Sets up robotic coating application equipment by loading programs, initializing robots and positioning parts/assemblies to be finished. Operates robotic coating application systems, recognizing problems and initiating corrective action as required. Sets up and operates the Laser Projection System, utilizing existing programs, for the purpose of creating sub-assembly material kits and projecting mask lines on parts.
Sets up and operates manual application equipment to apply both special technology and traditional coatings when so assigned. Performs preliminary process preparations such as removing/reinstalling panels and assemblies, cleaning, and hand or machine surface finishing when so assigned. Mixes coatings to specified proportions, verifying physical properties of mix such as viscosity and temperature as required.
Working to exacting tolerances, applies coatings to specified thicknesses and surface texture. When so assigned, may fill gaps, blend steps and mask layouts in accordance with sketches, blueprints or verbal instructions.
Tests and measures coating thicknesses both in process and when fully cured. Hand or machine finishes coated surfaces and details artifacts such as tapered edges.
Develops overlays and performs first run bonding operations. Uses geometry to cut raw-stock materials prior to bonding operations. Applies films and decals.
Sets up and operates micro-processor controlled coating chambers monitoring humidity, temperature and pressure to ensure proper application of special technology coatings. Works closely with authorized liaison personnel, to suggest or develop repair and/or maintenance procedures to be performed during routine maintenance operations or in the field, to assure maintainability of design requirements when coatings or finishes become damaged or worn during the life of the aircraft. When so assigned, assists other personnel during radar cross section testing to identify and resolve low-observable problems.
May perform rework where coatings must be moved/reapplied. Cleans equipment as required.
Ability to set up and operate robotic coating application equipment; to work with exceptional detail and to exacting tolerances as typically required on special technology vehicle exteriors. Requires a thorough knowledge of surface finishing, coating and applique techniques associated with low-observable technology.
Ability to use all necessary equipment to obtain the desired results. Ability to work interactively with a wide variety of other personnel to produce products with low-observable characteristics. Knowledge of shop mathematics including decimals, fractions and geometry.
A candidate is required to have the following minimum level of experience or training:
Completion of the one-year (or earlier as determined by performance) Special Technology Finisher/Coater Trainee, 381-3 Program.
Two years of similar outside experience which would include the application, hand and/or machine finishing of aircraft components, parts and fine details such as contours and tapers.
1.The ability to perform basic computer skills will be required in order to operate computer controlled paint robots.
2.Must have documented evidence of ability to read and interpret complex assembly and installation blueprints.
3.Must possess active Security Clearance(s) as required by the respective program.
Previous coatings experience
5 years experience as a Low observable coater
Previous F-22 or F-35 coatings experience
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Job Location(s): Marietta Georgia
Security Clearance :
Business Unit :
ESS0343 AERONAUTICS COMPANY
Job Class :
Job Category :
Relocation Available :
Work Schedule :
9x80A-9,9,9,9,8 hrs/d in wk1, /9,9,9,9,off in wk2
Req Type :
Additional Posting Locations :
Screen Coater - 1St Shift - 5:30 Am To 2:00 Pm
The Coater is responsible for applying the necessary emulsion coatings to all screens in accordance with GSP and industry standards. The Coater is required to maintain an adequate number of coated screens in each frame size to meet the coated screen inventory requirement. The Coater is also responsible for maintaining tension standards set on all screens. Responsibilities include mixing emulsion, checking tension and re-tensioning screens, and verifying stencil thickness and RZ value according to GSP standards prior to releasing a screen for exposure. The Coater is responsible for the cleanliness of the coating room and proper daily use and maintenance of the equipment required to coat screens. The Coater will all assist with training and coaching of others as required.
Check all screens for quality and tension before coating
Fill out quality tag on all screens coated
Coat all screens for the burn room in accordance with GSP and industry specifications
Put all coated screens in the proper racks
Maintain a consistent inventory of coated screens in all frame sizes according to levels established
Mix and strain emulsion for coating according to GSP standards
Restock all supplies used in the coating room prior to the end of each shift
Communicate technical issues or problems to the SMR Shit Team Leader and or the Screen Print Production Supervisor
Maintain cleanliness in the coating area
Complete daily & weekly paperwork as required
Assist in other areas of SMR as required
Work well a team environment to ensure productivity and quality
Must have a high standard for quality assurance.
Strong priority and time management skills
Self-motivating and self-managing
MINIMUM POSITION REQUIREMENTS:
High School diploma or GED
Ability to communicate (read, speak, write) in English
Minimum 2 years Screen Print or SMR experience
Ability to lift a minimum of 50lbs
Available for weekend work shifts and overtime
Able to pass a background check and drug screen
It is our people behind life's passions who will make the big difference. If you are interested in becoming part of a company that delivers market leading products, driving your own career and working with brands committed to active lifestyles, then you've found your fit.
Have what it takes? Join us.
We are the people behind life's passions.
Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: firstname.lastname@example.org or 1-888-735-4767.
Equal Opportunity Employer: Minorities/Women/Protected Veterans/Disabled
EEO is The Law - click here for more information
Brunswick and Workday Privacy Policies
Process Coater I
Performs basic coating operations under the supervision of department supervisor and/or lead person..
Essential Duties and Responsibilities:
includes, but not limited to, the following:
Performs coating operations including, but not limited to, dry film lube, cetyl alcohol lube, dye ID, etc.
Reads, understands and uses technical documents, including, but not limited to, blueprints, work instructions, job routers, etc. to ensure that parts conform to all applicable requirements.
Operates all coating equipment, including, but not limited to spray equipment, bake ovens, lube tanks, etc. Troubleshoots problems and determines action to be taken.
Operates electric or manual pumps in the removal of chemicals/paints from paint and/or lube tanks when necessary.
Required to observe all safety rules including, wearing of safety equipment for the handling and usage of paints and chemicals.
Must perform duties within required company and/or industry standards, specifications and policies.
Ensures product quality according to company and/or industry standards and practices.
Must handle all chemicals in accordance with all applicable company and governmental standards and requirements.
Monitors all equipment in the department, and depending on the repair needed, corrects the problem or reports to Lead or Supervisor any equipment in need of repair.
Trains Coating Operators when necessary
Adheres and implements all company HSE policies, procedures, and practices
This position requires no supervisory duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
High school diploma or equivalent is required; three to five years of related experience and/or training is desired
Ability to read and comprehend instructions, correspondence, blueprints, etc. Ability to read and write semi-complex instructions, presentations, reports, email, etc. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions and decimals.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form; deal with problems involving several concrete variables in standardized situations.
Ways of working, Experience, and Behaviors
To perform the job successfully, an individual should demonstrate the following competencies:
- Synthesizes complex or diverse information; Collects and researches data; Uses experience to complement data; understands the work flows and procedures.
Technical Skills – Technical skills in manufacturing and processing processes and methods including flow, layout, assembly and production equipment.
- Speaks clearly and persuasively in positive or negative situations; listens intently to others and seeks clarification; Provides clear and pleasant responses to inquires regardless of the situation; Presents complex concepts in a simple manner to achieve understanding of benefit plans at all levels of the organization. Demonstrates group presentation skills; Participates in meetings.
- Team Work
- Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Places success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed; Recognizes accomplishments of team members.
- Business Acumen
- Understands business implications of decisions; Displays orientation to profitability; Demonstrates knowledge of market and competition; Aligns work with strategic goals.
- Cost Consciousness
- Works within approved budget; Develops and implements cost saving measures; Contributes to profits and revenue; Conserves organizational resources.
- Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
- Prioritizes and plans work activities; Uses time efficiently; Plans for resources in a creative way only adding cost as absolutely necessary; Sets goals and objectives; Organizes or schedules their tasks
- Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently required to stand. The employee frequently is required to walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift, push, pull, and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception.
ENVIRONMENT, HEALTH AND SAFETY
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is frequently exposed to toxic or caustic chemicals. The employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually loud.
The responsibilities of the position include compliance with company and governmental safety, environmental and hazardous materials regulations and procedures. Must use all Personal Protective Equipment provided by the company for the position and the environment.
We are proud to be an EEO/AA employer M/F/D/V. We maintain a drug-free workplace and perform pre-employment substance abuse testing.
SUMMARY OF POSITION:
Places coating wheel into coating pot and secures coating wheel.
Places pot onto coater.
Hooks up air line into syringe and bleeds any air out of the syringe. Inserts syringe into coating pot and makes adjustments so coating will spread evenly onto coating wheel.
Receives trimmed reels from laser operation. Loads reels onto de-reeling arm.
Make sure the strip is correctly aligned. Pushes drive button to activate the coater.
Adjust coating wheel height so coating material transfers from wheel to strip. Once leading edge of strip appears at the end of the oven, change drive motors and guide strip around take-up reel.
Continually monitor and inspect coated resistors in process to insure conformance to specification.
Cleans machines as necessary.
Participates in continuous improvement activities
High School diploma or equivalent
One month to three months experience
Good hand/eye coordination to operate machine.
Fairly clean work with occasional exposure to disagreeable elements such as noise, dust, and fume.
Exposure to some chemicals used in cleaning coating equipment.
Viewing small, similar looking parts for extended periods of time.
Skills / Certifications
Ability to concentrate and pay close attention to all aspects of the operation, such as coating coverage.
Good organizational skills.
Ability to understand verbal and/or written instructions in order to take work directions.
Ability to operate up to four machines simultaneously.
Ability to read, write and perform arithmetic calculations.
We are recruiting for a local manufacturing company for a full time 1st shift Powder Coat Technician.
Assistant Coater Operator
Our Garden Segment is searching for a Assistant Coater Operator in our Greenfield, MO location.
Central Garden & Pet Company (NASDAQ: CENT) is a leading innovator, marketer and producer of quality branded products for the pet and lawn and garden supplies markets. Please see our website at www.central.com for additional company information.
Measures of Success
Ensure that the seed coating is applied in the correct amounts and that seed is fully coated.
Mix chemicals as needed using all required safety gear.
Mix chemicals for other dump stations as needed using all safety gear.
Mix and fill all chemical tanks as needed.
Keep accurate records of chemicals used.
Verify paperwork is accurate before it is turned in.
Make sure that bins, coaters, dryers and conveyance systems are fully clean when changing between different types of seed.
Clearly mark bin sheets as to what seed is in each one.
Double check each holding bin before running seed into it and verify that it is ready for new seed. Verify that seed is going to correct bin.
Keep track of dust bin weight for calculating waste % and track dust control system bags.
Ideal Candidate Attributes
Good math skills are needed.
Good communication skills are needed.
Must be able to clearly communicate with others.
Ability to work in a constant state of alertness and safe manner.
We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law.
LO (Low Observable) Coater
LO (Low Observable) Coater
Location: Pinellas Park, FL
Rate: $16.00 to $19.00/HR
M,T,W,Th 10 Hours, Friday Off
6:30am to 5:00pm. Or 6:30am to 5:00pm
Contractor to Lockheed Hire
Candidate who are submitted for this position must be prepared to interview in person.
Have the ability to prepare aircraft surfaces, mask, prime and apply finish coatings to exterior surfaces. Prepare and apply material for aerodynamic smoothing and flushness. Able to accurately cut materials to specific dimensions and bond to specified surfaces within exact tolerances. Must be able to interpret blueprints, process specifications, knowledge of basic shop mathematics and follow complex application procedures. Mask complex configurations. Have the technique to apply prime and finishing materials to correct thicknesses and use proper measuring inspection equipment to verify. Mix material including primers, top coats, sealants and fillers to correct ratios. Make patterns, cut and bond materials to contoured surfaces.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!