Coater Helper Job Description Sample
Journeyman Litho Coater Operator
This person will be responsible for set up and operation of the Wagner Spot Coater and KBA Coater. This position is an hourly non-exempt position, subject to overtime. This position reports to the Lithography Manager. This position has no supervisory responsibilities.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for assigned production schedule.
Responsible for set up and operation of coater line.
Train and direct personnel assigned to the coater line.
Adjust and check oven setting thermal and U.V., to assure proper bake.
Report mechanical problems.
Must wash up and change over the coater with the aid of the Stacker Operator.
Change coater roller with the aid of the Stacker Operator.
Maintain and lubricate equipment.
Responsible for startup, adjustment and shutdown of LTG oven.
Make minor mechanical repairs.
- Travel is required as needed for this position
EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Better than average mechanical ability.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Must have basic computer skills.
Must have the ability to read and comprehend simple instructions, short correspondence, and memos in English.
Must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent.
Must be capable of lifting 60lbs frequently.
Low Observable Coater - Speciality Painter
This occupation requires robotic and manual application of special technology coatings to produce aircraft, parts and assemblies with low-observable characteristics. Reads and interprets laboratory, engineering and manufacturing process specifications and plans sequence of operations for finish applications on low-observable aircraft, parts, assemblies and test articles.
Determines methods, tools, operations and sequences necessary to apply, rework, or repair aircraft structural coatings and finishes requiring ingenuity in developing new procedures or in deviating from standard practices to meet special requirements. Sets up robotic coating application equipment by loading programs, initializing robots and positioning parts/assemblies to be finished. Operates robotic coating application systems, recognizing problems and initiating corrective action as required.
Sets up and operates the Laser Projection System, utilizing existing programs, for the purpose of creating sub-assembly material kits and projecting mask lines on parts. Sets up and operates manual application equipment to apply both special technology and traditional coatings when so assigned. Performs preliminary process preparations such as removing/reinstalling panels and assemblies, cleaning, and hand or machine surface finishing when so assigned.
Mixes coatings to specified proportions, verifying physical properties of mix such as viscosity and temperature as required. Working to exacting tolerances, applies coatings to specified thicknesses and surface texture. When so assigned, may fill gaps, blend steps and mask layouts in accordance with sketches, blueprints or verbal instructions.
Tests and measures coating thicknesses both in process and when fully cured. Hand or machine finishes coated surfaces and details artifacts such as tapered edges. Develops overlays and performs first run bonding operations.
Uses geometry to cut raw-stock materials prior to bonding operations. Applies films and decals. Sets up and operates micro-processor controlled coating chambers monitoring humidity, temperature and pressure to ensure proper application of special technology coatings.
Works closely with authorized liaison personnel, to suggest or develop repair and/or maintenance procedures to be performed during routine maintenance operations or in the field, to assure maintainability of design requirements when coatings or finishes become damaged or worn during the life of the aircraft. When so assigned, assists other personnel during radar cross section testing to identify and resolve low-observable problems. May perform rework where coatings must be moved/reapplied.
Cleans equipment as required. Basic Qualifications Ability to set up and operate robotic coating application equipment; to work with exceptional detail and to exacting tolerances as typically required on special technology vehicle exteriors. Requires a thorough knowledge of surface finishing, coating and applique techniques associated with low-observable technology.
Ability to use all necessary equipment to obtain the desired results. Ability to work interactively with a wide variety of other personnel to produce products with low-observable characteristics. Knowledge of shop mathematics including decimals, fractions and geometry.
A candidate is required to have the following minimum level of experience or training: Completion of the one-year (or earlier as determined by performance) Special Technology Finisher/Coater Trainee, 381-3 Program. OR Two years of similar outside experience which would include the application, hand and/or machine finishing of aircraft components, parts and fine details such as contours and tapers.
NOTES: 1. The ability to perform basic computer skills will be required in order to operate computer controlled paint robots. 2. Must have documented evidence of ability to read and interpret complex assembly and installation blueprints. 3.
Must possess active Security Clearance(s) as required by the respective program. Desired skills
Previous coatings experience
5 years experience as a Low observable coater
Previous F-22 or F-35 coatings experience As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Join us at Lockheed Martin, where we’re engineering a better tomorrow.
*Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
- Job Location(s): Marietta Georgia
Powder Coater – Finisher: We are looking for an individual who is reliable, hard worker, and takes pride in powder coating and finishing very high-end, artistic products that will be displayed in very visible, public places like skyscrapers in New York, offices in Google, Nintendo, and other high-profile places. We prefer someone who has previous powder coating and finishing experience, but we will gladly consider you if you are reliable, positive, and a hard worker. This position will perform a variety of responsibilities within the finishing department, including hanging products, washing with a power washer, powder coating, sandblasting, and applying a patina finish with chemicals. This is a career position and not just a job. It is also a full-time, hourly position. Shift: 3:30pm - 12am, Monday through Friday Benefits: Medical Insurance Dental Insurance 401(k) with Company match Paid Time Off Holiday Pay
How to Apply: Apply to this posting and call Jeff at 801-784-5450
Snelling Staffing Services is currently seeking a Powder Coater in Kalamazoo, MI. The Powder Coater will be responsible for using industrial powder coating ovens to cure powder coated products and packing of completed powder coated products ready dispatch.
Shift: First and second shifts available
Duties of a Powder Coater:
- Identifying, picking and returning of powder boxes correctly according to a work schedule.
- Electrostatic powder coating of products in a spray booth or on a conveyor line according to specification.
- Demonstrating good ability to spray a Powder to the correct thickness range.
- Having the versatility to spray to a good standard a range of products from aluminum extrusions, large flat surfaces, awkward profiles and overcoat rejected powder coated parts.
- Clean down of electrostatic spray guns and spray booths correctly.
- Maintenance of the spray gun parts and booths according to instruction.
Requirements of a Powder Coater:
- 1 to 2 years of Powder Coating experience required
- Ensuring Health & Safety procedures are followed and to maintain all quality systems in order to meet your production targets.
- Take part in all Company training programs and team briefing sessions.
Interested and qualified candidates for the Powder Coater opening should submit their resume for immediate consideration. Resumes will be reviewed as quickly as possible and qualified applicants will be contacted to set up an interview.
Powder Coater - Finisher
We are looking for an individual who is reliable, hard worker, and takes pride in powder coating and finishing very high-end, artistic products that will be displayed in high end computer systems. We prefer someone who has previous powder coating and finishing experience, but we will gladly consider you if you are reliable, positive, and a hard worker.
MUST HAVE ALL OF THE FOLLOWING REQUIREMENTS, NO EXCEPTIONS:
- Good attendance and punctuality
- Attention to detail and ability to double check your own work for accuracy
- Ability to take direction
- Superb work ethic
- Adaptability - Ability to multitask and change direction quickly.
- Ability to work in a team environment as well as self motivated.
- Basic computer skills/knowledge.
- Positive attitude and able to take initiative.
- Maintain Organized and clean work area.
Experience in Warehouse, Shipping/Receiving and Inventory Management is a also a plus!
This position has great potential for advancement for the person possessing the required skills.
No direct interaction with customers required.
Benefits are not offered at this time.
Background check required.
SERIOUS INQUIRIES ONLY! We are looking for team members to grow our rapidly growing business to the next level!
Powder Coater And TIG Welder
We are seeking a Powder Coater who can also do TIG Welding to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms.
- Perform all aspects of the coating process
- Loading trays for wash coating/metal coating
- Loading/unloading ovens and must follow Lead person direction/ training
- Manufacture and fabricate finished metal products
- Install and repair various equipment and components
- Follow blueprints to meet product specifications
- Calculate material measurements to verify specifications
- Conduct tests to evaluate weld quality and tolerance
- Must pass general coating testing before hiring and also work within ACC job level system
- Ability to stand/sit for long periods of time
- Previous experience in welding, manufacturing, or other related fields
- Familiarity with welding tools and procedures
- Familiarity with engineering blueprints and schematics
- Ability to handle physical workload
Outstanding manufacturing facility looking for an experienced Industrial painter. Should have experience in painting, preferably with aluminum steel or stainless. Should have experience with polane and mil-spec paint. Will set up, operate or tend machines and equipment to coat a variety of parts and/or assemblies Could train someone who has automotive painting experience. Will work Monday - Friday 6AM - 3:30PM. . Pay between $11-$16/hr depending on experience.
Coater Technician (PM Shift)
Job Description: We currently have an opening for a friendly, team and goal oriented individual to join our Manufacturing Team in the position of Surface Coater Tech. The Coater Tech receives, sorts, and prioritizes work as it enters the coating area. The Coater Tech will also perform visual inspection of the lens before and after coating to validate lens surface; as well as clean and secure lens on control arm, remove lens and wiping excess water off spindles. Additionally the Coater Tech will verify air jets are properly aligned and checks both water and coating levels and perform general daily and weekly maintenance.
* Prioritize tray processing as dictated by tray color.
Perform lens visual inspection before and after coating to validate lens surface.
Check air jets for proper alignment, check water and coating levels, refill as needed.
Ability to communicate and escalate with peers and principles.
Run coating prime, check coating dispense height
Ensure and maintain the cleanliness of all equipment, workstations and overall facility.
Practice and comply with all requirements of our Quality Management System (QMS), as well as regulations promoting a safe and healthy work place environment.
Education, Experience & Background: * High School Diploma, GED, or equivalent work experience preferred.
One to three (3) years of related manufacturing experience preferred.
Ableto read English to understand written procedures, hazardous warning, etc.
Ability to think logically in following procedures and instructions
General problem solving abilities If you are prohibited from working on a government contract, this may disqualify you from consideration for this position. Visionworks provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religious beliefs, sex, gender, sexual orientation, age, marital status, national origin, ancestry, physical or mental disability or history of disability, genetic information, status as a protected veteran or disabled veteran, or any other status protected by Federal, state or local law.Job Requisition ID: RH23679A-B
Job Title:* Coater Technician (PM Shift)
Job Type:* Full-Time
Location:* Schertz, TX
Post Date:* 09/26/2017
Production Painter/Clear Coater
Growing Metal Fabricator is seeking detail oriented Production Painter/Clear Coater for artistic metals. Experience with wet spray painting in a production environment is preferred.
Must be hard working, a self-starter and be open to learning and continuously improving. If you are looking for a high end, creative and challenging job that embraces flex-time and self-empowerment, and your skills closely match employer's request, please apply for this position. Pay is $10-14/hour depending on experience and inclusive of cross training opportunities.
Requirements for this position: Our client in Pinellas Park is looking for 6 LO Coaters Have the ability to prepare aircraft surfaces, mask, prime and apply finish coatings to exterior surfaces. Prepare and apply material for aerodynamic smoothing and flushness.
Able to accurately cut materials to specific dimensions and bond to specified surfaces within exact tolerances. Must be able to interpret blueprints, process specifications, knowledge of basic shop mathematics and follow complex application procedures. Mask complex configurations.
Have the technique to apply prime and finishing materials to correct thicknesses and use proper measuring inspection equipment to verify. Mix material including primers, top coats, sealants and fillers to correct ratios. Make patterns, cut and bond materials to contoured surfaces. *Experience to interpret blueprints is required. *Experience with Sanding and Masking complex configurations is required. *Experience with LO Coating is required.
Low Observable Aircraft Structural Maintenance experience to include: • Evaluate, install, remove and repair low observable coatings. • Repair, modify and fabricate aircraft, metal, plastic, composite, advanced composite, LO and bonded structural parts and components. • Assemble and repair using special fasteners and adhesives • Ability to prep, apply coatings and bond materials to metal or composite parts. •Ability to mitre, blend, smooth, treat and finish parts to meet flushness and engineering requirements. •Mix material including primers, top coats, sealants and fillers to correct ratios. •Make patterns, cut and bond materials to contoured surfaces. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!