Corner Brace Block Machine Operator Job Description Sample
Dish Machine Operator (Dmo)/Utility - Tillmans Corner - #3170
The Dish Machine Operator (DMO)/Utility is responsible for maintaining the cleanliness and sanitation of all glassware, tableware, and cooking utensils/vessels by using both mechanical and manual cleaning methods in accordance with Ruby Tuesday standards. DMO/Utility communicates with and supports the Garden Bar Specialist to ensure the Garden Bar is always 100% stocked. Breaks down the Garden Bar and dish machine area following Ruby Tuesday procedures
ESSENTIAL DUTIES AND RESPONSIBILITIES
Maintain a gracious, pleasant and friendly attitude, while contributing to a teamwork-based work environment.
Take pride in his/her appearance while adhering to the Ruby Tuesday Dress & Appearance Policy.
Follow all safety and sanitation guidelines at all times.
Rinse, wash, sort, and stack glassware, tableware, and cooking utensils/vessels by using both mechanical and manual cleaning methods; return dishes and cooking utensils/vessels to the line or the proper storage location.
Set up, maintain, and break down the garden bar and dish area, including assembling/ disassembling the dish machine.
Support the Garden Bar Specialist by preparing items for service for garden bar according to specifications.
Wash and clean fruit and vegetables for peeling, dicing, shredding, or slicing using kitchen hand-utensils and electric equipment.
Measure and assemble ingredients and cooked items according to Ruby Tuesday recipes and menu specifications.
Ensure the highest quality preparation and presentation of food items served on the garden bar.
Complete specific cleaning responsibilities and station maintenance including, but not limited to, the walk-in refrigeration, prep, and dry storage areas.
Dispose of trash and debris according to Ruby Tuesday procedures.
Maintain clean, stocked, and sanitary restrooms through regular restroom checks.
Clean and maintain the cleanliness of carpeted and non-carpeted floors according to Ruby Tuesday standards and procedures.
Clean, roll, and unroll kitchen mats.
Sweep up trash around exterior of restaurant. Deck scrub walk ways and back dock area.
Responsible for the set-up, cleanliness, and organization of the work area before, during, and after every shift.
Position requires slip-resistant shoes.
EDUCACION Y/O EXPERIENCIA
Es preferible tener Diploma de la Escuela Secundaria o Equivalencia de la Escuela Secundaria.
Esta posicion requiere asistencia regular; requiere la habilidad de estar parado o estar caminando por varias horas a la vez; frecuentemente requiere oir, hablar, caminar, gatear, trepar, estar parado, tener que alcanzar, doblarse, mantener balance, arrodillarse, agacharse, levantar y transportar objetos de hasta 50 libras de peso, requiere la habilidad de tolerar cambios de temperatura significativos y la frecuente inmersion de las manos en agua y/o en soluciones para sanitizar. Habilidades especificas de vision requeridas para este trabajo incluyen vision de cerca, vision de lejos, vision de color, vision periferica, percepcion de profundidad y la habilidad de ajustar el enfoque.
Nota: La descripcion del trabajo refleja la asignacion de las funciones esenciales de la posicion actualmente, pero no prescribe o restringe tareas que puedan ser asignadas. Las funciones esenciales estan especificadas, pero estan sujetas a cambio en cualquier momento por varias razones. Incluyendo discrecion gerencial.
Besser Block Machine Operator - Frederickson, WA
Besser Block Machine Operator - Frederickson, WA
Location: Tacoma, WA, US, 98446
Company: Oldcastle Architectural
Job ID: 128008
Central Premix is a division of the Oldcastle Architectural Products Group (APG). APG is North America's leading manufacturer and supplier of concrete masonry, dry mix, and hardscape products. With over $2B in sales, APG operates across 33 states and 6 Canadian provinces through a network of over 165 operating locations and more than 5,000 employees.
Operates plant machinery as directed and specified while adhering to all rules and regulations mandated by safety policies and procedures to produce a superior product.
Essential Duties and Responsibilities
Read job specifications to determine machine adjustments and material requirements
Set stops or guides to specific lengths as indicated by scale, rule, or templates
Observe machine operation to detect product defects or machine malfunction
Review product for inconsistencies or abnormal appearance assuring product meets quality requirements
Perform routine machine maintenance
Assist other operators to set up machines and any other necessary tasks to adhere to deadlines and completion of product
Make sure all housekeeping is maintained in a clear and orderly fashion in assigned area
Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential duties of the job.
Requirements / Education / Experience
High school diploma/equivalent; or at least 1 months of related experience in trades specific to job requirements; or equivalent combination of education and experience
At least 1 year of experience required
Ability to read and interpret documents such as safety rules, operating and maintenance instruction and procedure manuals
Ability to be a self-starter and work independently
Ability to add, subtract, multiply, and divide, in all units of measure, using whole numbers, common fractions, and decimals
Have the ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form
Ability to deal with problems involving several concrete variables in standardized situations
Experience working with Microsoft Suite to include Word, Excel, etc.
Maintain a high level of accuracy in all aspects of work assignments
While performing the duties of this job the employee will be required to frequently stand on their feet for extended periods of time
Must have the ability to lift and/or move up to 50 lbs.
Able to work a flexible schedule
What Oldcastle Offers You
A culture that values opportunity for growth, development, and internal promotion
Highly competitive base pay
Comprehensive medical, dental and disability benefits programs
Group retirement savings program
Health and wellness programs
Oldcastle has a long and proud heritage as one of North America's largest corporations. We are a proud reflection of the hundreds of family businesses, local and regional companies and mid to large sized enterprises that together form the Oldcastle family. Oldcastle operates with a decentralized, diversified structure, letting you work in a small company environment while having the career opportunities of a large enterprise.
Oldcastle is a great place to grow! If you're up for a rewarding challenge, we invite you to take the first step and apply today! Please complete your online application and profile which will be sent directly to the appropriate Hiring Manager. Thank you for your interest in the Oldcastle family!
Follow Oldcastle Careers on Facebook, Twitter, Instagram, Google+, Pinterest, WordPress (Career Blog) and LinkedIn!
Central Premix is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
Central Premix is part of the Oldcastlecareers™ network.
Nearest Major Market: Tacoma
Job Segment: Temporary, Equipment Operator, Industrial, Machinist, Contract, Manufacturing
Block Operator - Chicago, IL
Norfolk Southern is one of the nation's premier transportation companies specializing in freight railroading. We operate approximately 21,000 route miles in 22 states and the District of Columbia, serve every major container port in the eastern United States, and provide efficient connections to other rail carriers. Norfolk Southern has the most extensive intermodal network in the East and is a major transporter of coal and industrial products.
We are a team of more than 28,000 employees working together to maintain our reputation as "The Thoroughbred of Transportation". As an industry leader, Norfolk Southern offers a competitive salary and an excellent benefits package.
Requisition ID : 1801
Primary duties: Instruct all road and yard crews as to the movement, make-up and placement of trains and cars in yard limits including industry placement and pull.
Perform all computer work relating to arrival and departure of trains and individual switching of cars, waybills, I/C, industry and yard inventory. Supervise train movement for Metra 74th St. to Manhattan. Perform any other duties that may be assigned by Supervision.
Candidates must be able to type 35 words per minute. Training and hourly wages are set by the union agreement between the Transportation Cmmunications Union and Norfolk Southern.
We maintain a drug-free workplace and perform pre-employment substance abuse testing.
Norfolk Southern is an equal opportunity employer including veterans and disabled.
Nearest Major Market: Chicago
Crane Operator - Power Block (Miami-Dade Efw Facility)
About Covanta: Covanta is a world leader in providing sustainable waste and energy solutions.
Annually, Covanta's modern Energy-from-Waste facilities safely convert approximately 20 million tons of waste from municipalities and businesses into clean, renewable electricity to power one million homes and recycle approximately 500,000 tons of metal. Through a vast network of treatment and recycling facilities, Covanta also provides comprehensive industrial material management services to companies seeking solutions to some of today's most complex environmental challenges. For more information, visit www.covanta.com .
Information on our facilities is available at www.covanta.com/Covanta-Map . For career opportunities, visit www.covanta.com/Careers . Covanta is an Equal Opportunity Employer.
We seek a dedicated individual who will operate overhead crane controls to stage, rotate stock and feed materials to conveyor for burning. This individual will oversee storage conditions, levels, lighting, door openings and proper operation of the crane.
Managing levels and height of material piles as well as inspecting cranes for defective parts and notifying supervisor of defects or malfunctions is essential. Assisting other plant operators is necessary as well as supporting plant operations. Keeping crane cabs neat and orderly is a requirement, as well as performing operational preventive maintenance and general housekeeping daily. This job also entails completing PM sheets and work orders as required.
To be considered for this position the individual must have a high school diploma or general education degree (GED); one to two years related experience and/or training in similar situation. Mechanical competency. Internal candidates must have completed qualification standards for prior position in company's line of progression.
Machine Operator III - Fin Machine Operator
Ensuring Chart's Success…
Chart's manufacturing group is critical to building our products on time and of the highest quality to our customers. The Machine Operator III will work towards our production goals along with peers through the direction of lead man, shift supervisor, and plant manager.
What Your Day-to-Day Activities Will Be…
Candidates will have be running McElroy and Happy fin tube machines
Reads, interprets drawings and written instruction applicable to specific machining process.
Performs set-up and operation as required without supervision.
Performs all required measurements.
Capable of required tool selection for required task.
Trains, or assists in training new employees.
Can safely operate overhead or jib type cranes and rigging.
Performs all non-electrical preventative maintenance as indicated by supervision for specific machinery.
Adhere to all safety guidelines and policies.
Other duties as assigned.
Your Professional Experience Should Be…
- The ability to reading a tape measure as well as blue prints.
Your Education Should Be…
- High School Diploma or Equivalent Work Experience
Your Physical Work Environment Will Require…
While performing the duties of this job, the employee is regularly required to:
Standing for prolonged periods of time.
Occasional repetitive lifting up to 60 lbs as regular daily activities necessitate.
Handle or feel objects.
Tools or controls and talk or hear.
The employee is occasionally required to walk, stoop, kneel, crouch or crawl.
Chart Industries is an equal opportunity employer.
Sewing Machine Operator
Mohawk Industries is the leading global flooring manufacturer that creates products to enhance residential and commercial spaces around the world. Mohawk's vertically integrated manufacturing and distribution processes provide competitive advantages in the production of carpet, rugs, ceramic tile, laminate, wood, stone and vinyl flooring. Our industry-leading innovation has yielded products and technologies that differentiate our brands in the marketplace and satisfy all remodeling and new construction requirements. Our brands are among the most recognized in the industry and include American Olean, Daltile, Durkan, IVC, Karastan, Marazzi, Mohawk, Pergo, Quick-Step and Unilin. During the past decade, Mohawk has transformed its business from an American carpet manufacturer into the world's largest flooring company with operations in Australia, Brazil, Canada, Europe, India, Malaysia, Mexico, New Zealand, Russia and the United States.
Mohawk Industries, Inc. is an Equal Opportunity Employer committed to an inclusive workplace and a proud Drugs Don't Work participant.
EOE MINORITIES / FEMALES / PROTECTED VETERANS / DISABLED
Responsible for operating an industrial sewing machine to secure all sides and corners of rugs.
Responsible for performing this job in a quality and productive manner.
Expected to maintain all housekeeping items and follow all housekeeping procedures associated with the position.
Responsible for removing product off stacks and pulling product to the sewing machine.
Responsible for removing improper sewing/binding and repairing thread breaks.
Responsible for changing thread, binding, and/or needles.
Responsible for pushing product to the tailburner.
Prior sewing experience preferred
Must be able to demonstrate ability to learn the operation of an industrial sewing machine
Must be able to follow all safety rules
Sustained employment of at least 6 months
Prior experience in an industrial environment preferred
must be able to stand, bend, stoop, push, and pull for the duration of a 10-hour shift
Machine Operator 2Nd Shift
Operate and trouble shoot production filler lines at a standard level or above. Monitor label placement, weight measurements and torque pressure periodically. Manually record daily production and any possible down time. Assist coworkers at material handling and palletizing of finished good product.
Arrange for necessary tools to perform job.
Insure all safety devices are in place and operational.
Verify received components against MOS.
Verify label position, torque, fill height and against specs by running test pieces.
Operate filling equipment and machinery.
At specific intervals evaluate line samples for various attributes, fill weight and height, etc.
Observe machine operation to detect work piece defects or machine malfunction.
Trouble shoot and assist in the routine maintenance of filling equipment and machinery.
Relieve employees on line when necessary.
Accurately complete documentation of work performed in a timely manner.
Assist material handlers with set up, stack, mark and pack finished work pieces.
Load and unload materials into/from pallets, trays, racks and shelves by hand according to specific block and tier.
Ensure proper work order close out.
Attach identifying tags/labels to materials or mark information on cases, bales and other containers.
Verify and complete line clearance.
Follow all Safety guidelines and policies, follow GMP's related to personal hygiene and handling of material.
High school diploma or general education degree (GED).
Ability to add, subtract, multiply and divide in all units of measure.
Ability to use instruments and measure.
Here are just some of the benefits you will enjoy in this role:Health, dental and vision insurance401(k) with company match
Short and long term disability insurance
Flexible dependent and health spending accounts
Paid time off – vacation, sick and personal days WORKING CONDITIONSWhile performing the duties of this job, the employee is regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse, and telephone to talk and hear. The employee is frequently required to sit and reach with hands and arms. The employee must occasionally lift and/or move up to 20 lbs.While this position will primarily work in an office environment, travel, including overnight (approx. 30 %) may be required to attend company events, staff meetings, training sessions, customer meetings and/or industry or vendor trade shows.May be required to utilize personal vehicle for business travel that may result in long periods of sitting. Must maintain a valid driver license with a driving record that meets Company minimum standards and maintain current automobile insurance coverage as set forth by Sysco.The noise level in the work environment is usually moderate.Overtime work may be required depending on business needs. NOTICE: The above statements are intended to describe the general nature of the environment and level of work being performed by this job. This job overview in no way states or implies that the duties and responsibilities listed are the only tasks to be performed by the associate in this job. The associate will be required to follow any other instructions and to perform any other job related duties requested by his or her supervisor. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions.This job description supersedes prior job descriptions. When duties and responsibilities change and develop, the job description will be reviewed and is subject to changes of business necessity. EEO/AA Employer
Machine Operator – ATC
Prior Manufacturing experience
Ability to work with computerized shop floor tools
Ability to follow written instructions and take verbal instructions for multiple assembly tasks in a manufacturing shop environment
Demonstrates strong communication and follow-up skills
Strong written and verbal communication skills
Demonstrates positive attitude, strong work ethic, teamwork and flexibility
Has a strong belief in the purpose of Metem, a Power business
To stay connected with exciting news and the latest job opportunities from GE businesses, follow us on twitter: @geconnections
The ATC (Advanced Technology Center) Machine Operator is responsible for set-up and operation of production machines, including electrical discharge machines (EDM), CNC EDM Machines, FHD (fast-hole drill) EDM Machines, and Electro-Chemical Machines (ECM).
As the Machine Operator – ATC, you will:
Set up and operate special purpose equipment, conventional and/or numerical control machines to perform machining operations, fast hole drilling, graphite shaping on metal castings, forgings and bar stock according to specifications that hold to high quality machine standards
Calculate and set controls to regulate machining factors such as speed, feed, coolant flow, depth and angle of cut, or enter commands to retrieve, input, or edit computerized machine control media
Read and interpret blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and setup requirements
Start and observe machine operation to detect malfunctions or out-of-tolerance machining, and adjust machine controls as required to ensure operation runs successfully
Install work holding devices, such as blocks and tooling on table of machine using hand tools
Select and install tooling, place electrodes in automatic-tool-changer (if required) in sequence specified on process sheet
Use electronic documenting system to update status of parts as they are moved throughout the plant, and record all necessary quality information, including accept / reject criteria and detailed information regarding any quality defects
Perform troubleshooting and problem solving as required
- High School Diploma / GED
Ability and willingness to work occasional overtime, including the night shift, and weekends
Ability to lift / push / pull at least 50 pounds, with or without reasonable accommodation
GE is the world's Digital Industrial Company, transforming industry with software-defined machines and solutions that are connected, responsive and predictive. Through our people, leadership development, services, technology and scale, GE delivers better outcomes for global customers by speaking the language of industry.
GE Power is a world leader in power generation with deep domain expertise that helps customers deliver electricity from a wide spectrum of fuel sources. We are transforming the electricity industry with the digital power plant, the world's largest & most efficient gas turbine, full balance of plant solutions and our data-leveraging software. Our innovative technologies and digital offerings help make power and water more affordable, reliable, accessible and sustainable.
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
Machine Operator - Katy, TX
Hubbell Incorporated was founded in 1888 and has grown into an international manufacturer of quality electrical, lighting and power solutions with more than 75 brands used and recognized around the world. Our founder, Harvey Hubbell, developed tooling and equipment to serve the growing demand for new assembly and manufacturing machinery during the industrial revolution.
An early, and one of many patents awarded, came for the creation of the first practical method to control electricity through the pull chain socket that remains unchanged today. As a market leader in reliable, electrical solutions, we provide more than half a million products delivered through our various business groups. Hubbell is committed to continually innovating solutions that work, transforming old products with new ideas, and ensuring that we Energize, Enlighten and Empower the communities that support us.
Hubbell Commercial & Industrial (HCI) provides solutions for a broad range of non-residential and residential construction, commercial and industrial applications along with high-voltage test and measurement solutions. As a leading global manufacturer and supplier in multiple markets, we have quality products that serve the commercial construction, datacom, industrial light, industrial heavy, high voltage, residential and oil & gas markets. HCI has built its success through strong leadership, employee and customer loyalty and an exceptional sales force.
5713 Thirteenth Street
Katy, TX 77493
Skills and Experience
SUMMARY: Duties consist of lifting parts onto a table and operating a pneumatic hand file / bench-top sander along the edge of the material to get rid of the bur, this includes removing sharp corners that is left by the webbing after punching.
Once the part has been deburred, they must restack the part onto a skid neatly and count all parts completed.
The final step includes placing a tag on the parts that have the part number and exact quantity so the next operation can identify each part.
Duties and Responsibilities
Must be able to follow directions.
Must be able to operate a pneumatic grinder / file.
Must be able to operate electric bench-top sanding machine.
Must be able to count, stack and label parts correctly.
Must have steel toe boots with metatarsal insert.
Must be able to get along with other employees.
Must be able to make it to work every day and get right to work after clocking in.
Must dress appropriately (no holes in jeans or sleeveless shirts)
Must be able to lift 50 pounds.
Requires standing and walking the majority of the workday.
Indoor shop is not climate controlled.
Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.
Job Segment: Equipment Operator, Industrial, Machinist, Manufacturing
Machine Operator III
This position performs manufacturing and inspections functions during production. A key part of this position will be meeting established safety practices, quality standards and production rates. This position is also required to operate a fork lift to assist in product movement.
The Machine Operator III will have achieved the competencies as described in Skill Block Level 3, and will be expected to consistently demonstrate that level of proficiency.
Reports to: Shift Supervisor
Supervises: Provides work leadership to 1-4 Temporary workers as needed
Interacts with: Shift Supervisor, Plant Manager
Maintain knowledge of product quality plans; check for flaws, blemishes, discoloration, burn marks and warping.
Assemble product in accordance with quality plan; assemble feet, cor-plugs and card holders as needed.
Emboss product when required; ensure a quality embossing stamp.
Perform inspection of each part to quality plan requirements.
Notify supervisor of any suspect quality issues.
Transport product into inventory in a safe manner; [using Forklift machine].
Stack and package product in accordance with quality plan and supervisors instructions.
Provide on the job training to new employees and temporary employees when requested by supervisor.
Assist in routine preventive maintenance on mold and machines.
Assist in lubing molds.
Assist in clean up of manufacturing areas.
Provide input to improve processes and procedures.
Maintain safe workplace and ensure that safety policies are followed.
Report safety concerns and hazards to your supervisor.
Other duties as assigned.
Flexible and adaptable to a changing environment.
Able to get along with others and work in a team environment
Qualifications [Knowledge, Experience Skills]:
High School Diploma or Equivalent preferred. (Related work experience can be substituted for educational requirement.)
Related Experience required:
0-3 years experience in plastics industry preferred.
Has a basic knowledge of commonly used concepts, practices and procedures within the plastics field.
Ability to work in a seasonally fast paced environment under direct supervision.
Forklift experience is a plus.
Specific Skills required:
Safety and Quality Standards
Basic math skills
Basic mechanical skills
General computer skills
Certifications, licenses and or other special requirements:
Willingness to work a flexible schedule, including variable starting times, overtime and/or weekends/holidays;
Willingness to work in a manufacturing environment that requires contact with high noise and heat levels, dust, grease, oil and other substances;
Must follow safe work practices, including required personal protection equipment.
Must be able to lift, push, pull frequently, and maneuver at least 100 pounds.
12 hour shifts; 2/2/3 working schedule
$13.45 per hour
Full health benefits effective on the 1st day of the following month
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!