Corrosion Control Fitter Job Description Sample
Corrosion Control - Aircraft Mechanic I
Supporting the Most Exciting and Meaningful Missions in the World
- Aircraft Mechanic I
PAE is seeking a Corrosion Control
- Aircraft Mechanic I to support one of our customers at Lemoore, CA:
BASIC FUNCTION SUMMARY (included but not limited too)
Performs scheduled and unscheduled corrosion prevention and treatment maintenance at the Organizational Level on F/A-18. Smoothens surfaces with sand paper, roughens surfaces with acid solution and non-corrosive abrasives to ensure that paint adheres to surface, masks and covers portions of surfaces not to be painted.
The AC-1 Mech – Corrosion Control works under minimum supervision to safely prepare, paint, and detail aircraft in accordance with company quality standards and procedures. Stores, handles, uses and disposes of hazardous waste chemicals in accordance with Federal, State, and local environmental protection laws. Properly takes care of and maintains shop equipment and tools. Follows standardized procedures when using sealants, paint strippers, and corrosion preventative chemicals, and utilizes personal protective equipment as required.
A working knowledge of paint processes and products is necessary. Comply with safety rules/procedures and be alert for unsafe conditions. Address unsafe conditions prior to putting people or property at risk. Perform other duties as required. This Mechanic works under minimum supervision and gains technical guidance, as required, from supervisor or higher-level Mechanic.
ESSENTIAL DUTIES AND ACCOUNTABILITIES (included but not limited too)
Experience working on F/A-18
Paint, sand surfaces, and scheduled/unscheduled maintenance.
Will have experience writing with clarity and technical accuracy.
Performs aircraft inventory, acceptance and transfer inspections.
Perform other tasks as directed by management.
Provides technical assistance, guidance and instruction as required.
Maintains and/or completes required records and applicable maintenance forms.
Become CDI certified as directed by management to perform collateral duty inspection assignments
Performs daily duties normally associated with this specialty.
Practice good housekeeping, tool control, FOD awareness/prevention and safety always.
Comply with Hazardous Waste Program.
Operates SE, flight line vehicles and other support equipment as required.
Qualified to perform corrosion detection, treatment, prevention and documentation Assists in aircraft/equipment movement and flight line foreign object prevention walks.
Annotates maintenance actions in aircraft forms and VIDS/MAF, Work Orders in NALCOMIS/OOMA.
Will have knowledge of and understand basic supply procedures. Assist with ordering parts, tools, materials and equipment as required.
Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment.
Keeps shop area clean and participate in daily hangar cleanups.
Aircraft mechanics shall have three years' experience in their specific aircraft maintenance occupational field. The last two years must have experience as an Aircraft Corrosion Control Technician; in the military, or with a government aviation maintenance Contractor.
Must have experience in corrosion detection, treatment and prevention.
The mechanic will be capable of cross-training into or assisting other specialties as directed by management.
Must be a US citizen and completed high school or equivalent.
Will have experience writing with clarity and technical accuracy.
Must read, write, speak, and understand English.
Candidate experience must be clearly defined on resume with specific dates (month and year)/locations of relevant experience.
Shall have completed appropriate F/A-18 preferred, Advanced Corrosion Control (N-701-0013) /Aircraft Paint and Final Finish (N-701-0014) training or Air Force/USCG equivalent preferred.
Must be able to meet and maintain physical requirements associated with and/or pass medical exam requirements related to performing daily assigned tasks. Must maintain continuous respirator qualification.
High School graduate or equivalent. Must have a valid driver's license.
Must be able to obtain a secret level clearance and be able to maintain it.
Must be available to work any shift including weekend shift.
LICENSING, CERTIFICATION REQUIREMENTS
(MAY BE REQUIRED but not limited too)
N-701-0013 (advance corrosion) and N-701-0014 (paint and final finish).
Pass Paint physical
Egress/Explosive System Checkout
Tow Supervisor/Tow Brake Operations
Required to pass SF-86 background investigation
PAE is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.
EEO is the Law Poster
EEO is the Law Poster Supplement
Aircraft Worker - Corrosion Control
United States of America - Florida, Jacksonville
AECOM is now hiring qualified Aircraft Workers in support of U.S. NAVY aircraft maintenance operations at Naval Air Station Jacksonville, Jacksonville, FL.
The Aircraft Worker Corrosion Control makes repairs to aircraft following orders of higher grade worker. This work will be inspected by supervisors or quality assurance representatives for general compliance with accepted practices; assists in inspection, cleaning, arresting and repairing corrosion on aircraft structure, landing gear, and flight surfaces. This worker may assist in the application of coatings and sealants, and the application of aircraft markings such as numbers and squadron logos; will obtain standard parts by referring to parts manuals and by making comparisons with samples; will perform pre-flight and post-flight maintenance inspections in support of flight schedule; will enter in the maintenance records description of the work performed; may remove, install, and seal panels; will services engines and other various aircraft components; will perform scheduled and unscheduled maintenance on assigned aircraft, short of overhaul, required to keep aircraft in safe operating condition; will be required to carry tool boxes to and from aircraft; will perform preoperational inspection and operate ground support equipment such as electrical power supply, tow tractors, and engine starting units. The Aircraft Worker could perform this work up to 7 days and 40 hours a week and overtime depending on operational tempo.
Shift work and detachment required. High School graduate or equivalent with a minimum two (2) years actual and recent organizational level aircraft flight line or aircraft carrier flight deck servicing experience is recommended.
Must have completed Corrosion Control course C-600-3183 or equivalent military aviation maintenance training or maintenance technical school curriculum. Prior experience with U.S. Navy servicing operations on P3C aircraft highly preferred. Must have a valid state driver's license.
Knowledge and use of special tools/equipment required to perform assigned maintenance tasks is mandatory.
Work is performed primarily outdoors under all types of weather conditions with exposure to loud noise and exhaust fumes.
Ability to read and interpret technical publications, safety rules, operating and maintenance instructions and procedure manuals.
Should be a self-motivator and work with minimum supervision.
Must be able to meet physical requirements associated with and/or pass any medical examination requirements related to performing daily assigned tasks.
There is a great deal of standing, climbing, bending and stooping.
Must be able to lift up to 50 pounds.
Must be able to speak, read, write and understand the English language. Candidate must be able to obtain an approved status from the Contractor Verification System, which includes a 7 year background check and maintain a security clearance for Public Trust. Must pass ordnance certification.
Must be able to obtain and maintain a Security Clearance
What We Offer
When you join AECOM, you become part of a company that is
pioneering the future . Our teams around the world are involved in some of the most cutting-edge and innovative projects and programs of our time, addressing the big challenges of today and shaping the built environment for generations to come. We ensure a workplace that encourages growth, flexibility and creativity, as well as a company culture that champions
inclusion, diversity and overall
employee well-being through programs supported by company leadership. Our
core values define who we are, how we act and what we aspire to, which comes down to not only
delivering a better world , but working to "make amazing happen" in each neighborhood, community and city we touch. As an Equal Opportunity Employer, we believe in each person's potential, and we'll help you reach yours.
Job Category Maintenance
Business Line Management Services
Business Group Management Services Group (MS)
Country United States of America
Position Status Full-Time
Requisition/Vacancy No. 216704BR
Clearance Required Yes
Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.
Corrosion Control Technician
Coffman Engineers Inc. is seeking a Corrosion Control Technician in our Anchorage office.
NACE CP2 Technician certification
College degree preferred
Valid driver's license and driving record that meets Coffman's stringent requirements are required.
Transportation Worker Identification Card (TWIC) or eligibility to obtain a TWIC
Travel and overtime
Why You Want To Work Here
You could choose to work anywhere, so why work at Coffman Engineers? Because we are different – our culture sets us apart. Simply stated, we are a group of creative, high-performing people who like working together and believe that what we do makes a difference. Our culture isn't the only thing that makes us different, but it drives everything we do.
This position offers you the experience of working in the oil and gas industry, traveling to remote and interesting locations throughout Alaska, and the opportunity to work hard in a team environment! We welcome the dedicated and the driven. Join us.
Don't take our word for it. Check out what others are saying:
Coffman At A Glance:
40 years in business
490 employees in 14 offices located in 8 states and 1 territory
Multi-discipline engineering services plus fire protection, corrosion control, commissioning and project/construction management
#212 Top 500 Design Firms, Engineering News-Record, 2018
#12 Best Firms to Work For - Multi-Discipline, Zweig Group, 2018
#30 Zweig Group Hot Firm List, Zweig Group, 2018
You must apply online for this position. If you are unable to complete our online application process, or if you need assistance to do so, let us know so we can provide a reasonable accommodation.
As part of the application process, you will be asked to create a user profile that allows you to manage the application process, answer a few questions, attach your resume and other documents, and then submit. We look forward to learning more about you! Go to http://www.coffman.com/home/careers/openings/anchorage-openings/ on Coffman's website and open the appropriate position posting.
If you are experiencing problems applying through our system, please try again using a different browser or an updated version of your current browser. If that doesn't work, please contact us directly.
This position is direct with Coffman Engineers; we are an Equal Opportunity and Affirmative Action Employer of Minorities/Females/Veterans/Disabled individuals.
Corrosion Control Technician I/Ii
JOIN THE SAN DIEGO COUNTY WATER AUTHORITY!
The San Diego County Water Authority is an independent public agency that serves as San Diego County's regional water wholesaler. The mission of the Water Authority is to provide a safe and reliable water supply to its 24 member agencies serving the region's $220 billion economy and 3.3 million residents.
The Water Authority is executing a long-term strategy to diversify the region's supplies, make major investments in the region's water delivery and storage system, and improve water use efficiency. Through dynamic leadership, thoughtful planning, and prudent fiscal policies, the Water Authority is cost effectively managing the region's water portfolio, while continuing to diversify supplies to enhance current and future reliability.
THE OPERATIONS & MAINTENANCE DEPARTMENT
The Operations and Maintenance (O&M) Department is responsible for operating the Water Authority's aqueduct system; ensuring facility security and emergency preparedness; and maintaining and managing the fleet and various other assets. Specifically, the department controls water deliveries to meet member agency demands; manages dam and reservoir operations; ensures water quality; oversees water treatment plant and power generation operations; maintains all vehicles and heavy equipment; provides electro-mechanical support; implements the Asset Management Program (AMP); complies with all applicable environmental regulations; and develops and manages computerized Supervisory Control and Data Acquisition (SCADA) and system maintenance programs.
THE ASSET MANAGEMENT DIVISION
The Asset Management division manages the water infrastructure and the reliable delivery of water through four main functional groups: Condition Assessment and Monitoring, Data Management, Program Management and Prioritization, and Project Delivery and Capital Improvement Project (CIP) Support.
The Condition Assessment and Monitoring group performs scheduled inspections, condition assessments, failure analysis, condition monitoring, and cathodic protection. The Data Management group performs database design and support. The Program Management and Prioritization group performs risk assessment, project prioritization, new project scopes, and program budgeting. The Project Delivery and CIP Support group provides project management, departmental project representation, design reviews, and construction submittal reviews.
THE IDEAL CANDIDATE
The ideal candidate will have knowledge of basic principles and practices of corrosion control/cathodic protection and prevention. This person will be a self-starter, take direction well, and be able to work as part of a team to identify system deficiencies and provide technical solutions. Experience conducting field surveys or other hands-on field work is desirable.
Corrosion Control Technician I: $29.26 - $39.35 hourly ($60,858.72 - $81,848.00 Annually)
Corrosion Control Technician II: $32.30 - $43.44 ($67,177.77 - $90,344.80 Annually)
The position may be filled at either level, depending on candidate qualifications. Currently, there is one (1) vacancy in the Asset Management Division, stationed at the Escondido facility.
The Corrosion Control Technician I/II performs a variety of duties in the installation, testing, inspection, modification, maintenance, and repair of all components associated with the Water Authority's corrosion control program; inspects and repairs cathodic protection systems; and performs related duties as assigned.
The Corrosion Control Technician I is the entry-level class in the Corrosion Control Technician series. Initially under direct supervision, incumbents learn and perform a variety of skilled, journey-level duties in the installation, testing, inspection, modification, maintenance, and repair of all components associated with the Water Authority's corrosion control program.
The Corrosion Control Technician II is the journey-level class in the Corrosion Control Technician series. Under general supervision, incumbents perform the full range of assigned duties including the responsibility for the installation, testing, inspection, modification, maintenance, and repair of all components associated with the Water Authority's corrosion control program; inspects and repairs cathodic protection systems. This classification must possess a thorough knowledge of SDCWA water conveyance facilities.
The duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the class.
Performs a variety of duties associated with the Water Authority's corrosion control program; installs, tests, inspects, modifies, maintains, repairs, and operates a variety of galvanic anode and impressed current cathodic protection equipment, facilities, and devices for large diameter pipelines and associated water delivery, storage, treatment, and power generation facilities.
Performs field surveys of soil resistivity and physical characteristics for determining corrosivity or interference with other buried structures and determines adequacy of electrical insulators and connections and electrical continuity.
Conducts tests and surveys of cathodic protection systems to isolate and identify system problems and deficiencies; reviews test data and records to determine substandard system performance; corrects system deficiencies as necessary.
Operates a variety of electrical and electronic testing devices and equipment; operates a computer to enter and retrieve data and to perform calculations.
Inspects the work of contractors performing construction, installation and repairs to cathodic protection systems and facilities.
Assists with internal and external inspection of large diameter pipelines.
Evaluates protective coating conditions to determine corrective action and appropriate maintenance.
Gathers information and physically locates underground pipes, cables, and facilities.
Maintains awareness of new trends and developments in the fields of corrosion control and cathodic protection.
Prepares and maintains accurate logs, records and drawings of corrosion control and test data; prepares necessary reports.
Assists with condition assessment of pipeline structures, flow control facilities, major facilities, and pipeline structures in the street.
Assists with installing, upgrading, troubleshooting, testing, and maintaining cathodic protection remote monitoring units; coordinate repairs with manufacturer as necessary.
Collects and compiles data from corrosion test stations to determine the need for maintenance, repair, and/or replacement of the associated facility; maintains accurate records using digital technology and utilizes the system to trend and analyze the data.
Diagnoses, troubleshoots, adjusts and repairs corrosion prevention and testing devices, equipment and systems.
Performs field and laboratory surveys of soil resistivity and physical characteristics for determining environmental corrosivity or interference with other buried structures.
For further details regarding the duties and responsibilities, and qualification guidelines for this class specification, please click on the following link: Corrosion Control Technician I / Corrosion Control Technician II
This position has been approved for hire at Step 1 of the salary range. Depending on qualifications, starting salary may be negotiable. Step increases may occur at 6 months, 1 year, and annually thereafter. Qualification Guidelines
The qualification guidelines generally describe the knowledge and ability required to enter the job in order to successfully perform the assigned duties. Any combination of experience and training that would provide the required knowledge, skills and abilities will be considered.
Corrosion Control Technician I
Equivalent to the completion of the twelfth grade supplemented by college level course work in engineering, chemistry, physical science, corrosion, or related fields.
Corrosion Control Technician II
Equivalent to the completion of the twelfth grade supplemented by college level course work in engineering, chemistry, physical science, corrosion, or related fields; and two years of experience in corrosion control and prevention.
A Corrosion Control Technician I may be considered for advancement to Corrosion Control Technician II after demonstrating proficiency to perform the full range of duties of the latter class. Proficiency criteria and the process for demonstrating performance at the levels established in the criteria are established jointly by hiring authorities and the Human Resources Manager and are described in a separate document.
LICENSES AND OTHER REQUIREMENTS
A valid California driver's license and the ability to maintain insurability under the Water Authority's Vehicle Insurance Policy.
Possession of, or ability to obtain, a Cathodic Protection Tester (NACE-CP1) certification within 24 months of hire to be considered for the Corrosion Control Technician II classification.
This classification is assigned to work a 4/10 schedule, Monday - Thursday, during normal business hours. Normal business hours are 6:00 a.m. to 4:30 p.m.
To be considered for this position, please submit an employment application and supplemental questionnaire by 5:30 p.m., Tuesday, June 18, 2019. Resumes will not be accepted in lieu of a completed application and supplemental questionnaire.
All applications and supplemental questionnaires will be evaluated in relation to the criteria outlined in this job announcement. The selection process may consist of an appraisal interview, writing exercise, and/or other appropriate screening devices.
To ensure timely and successful navigation, please consider applying early if you are new to the governmentjobs.com application system. For technical assistance with the online application system, please review the Government Jobs online application guide, or contact their toll-free applicant support line at (855) 524-5627. If you have questions regarding the position, please contact Patricia Duran, Human Resources Analyst, at (858) 522-6663.
The San Diego County Water Authority is an Equal Opportunity Employer and does not discriminate against any person on the basis of race, color, religion, sex (including pregnancy status), gender, gender identity and/or expression, sexual orientation, marital status, age, genetic information, mental or physical disability (whether perceived or actual), ancestry, military or veteran status, citizenship status, medical condition, and/or national origin.
Should you have any questions regarding the recruitment process or require accommodations pursuant to the Americans with Disabilities Act, please contact Patricia Duran, Human Resources Analyst, at (858) 522-6663.
Performs a variety of technical assignments associated with the cathodic protection program for the Company's natural gas distribution facilities. Monitors and maintains the corrosion control facilities by performing testing, inspections and some repairs of these facilities. Initiates work orders for recommended improvements and maintenance of corrosion control facilities to ensure compliance with Federal regulations.
Monitor the installation and maintenance of cathodic protection for corrosion control of gas facilities and performs testing and inspections to ensure compliance with Federal DOT Corrosion regulations where applicable. Evaluate and update corrosion circuit records, rectifier notifications, and mapping records.
Work independently to complete monthly assignments and track subsequent areas of cathodic protection exception to meet various state and federal regulatory compliance requirements.
Operate and maintain specialized corrosion instruments to obtain field data under a wide variety of conditions.
Recommends improvements to material, construction and operating standards related to corrosion control as defined in the YG Construction Standards or Gas Operating Procedures.
Provide specifications, inspections and estimates relative to corrosion work by contractors, for typical cathodic protection system maintenance and installations.
Provide corrosion control expertise, within YG's standards and practices, to Capital Construction team and Gas Operations group for cathodic protection upon request.
Troubleshoot cathodic protection systems within the scope of the TMP for the Corrosion Technician classification and initiate appropriate corrective actions; including work orders/job orders, State and Town permitting, CBYD mark outs and notification for the maintenance of corrosion control facilities.
Direct, monitor and inspect the work of corrosion contractors performing facility installation and repair work, as needed.
Perform assessment of installation practices of new gas main construction i.e., proper coating application, testing/calibration of holiday detection and adherence to YG corrosion construction practices.
Maintain facility updates on corrosion software.
Perform inspections of factory coating applications on new gas YG gas piping upon request.
Other duties as assigned.
Minimum Entry Level Requirements:
Education and Experience: High School Diploma and the ability to pass the applicable Federal Operator Qualification tests and Time Merit Progression steps to a fully qualified Corrosion Technician within three years.
Knowledge, Skills and Abilities: The ability to understand electrical theory, basic chemistry principles and corrosion theory. Thorough knowledge of gas distribution operations and construction. Thorough knowledge of Federal and state codes relative to leak classification and corrosion control. Thorough knowledge of the work management system. Ability to work independently. Possess a valid motor vehicle operator's license.
Working Conditions: Frequently exposed to gaseous atmospheres, high noise levels, and traffic, construction site hazards and hazards on customers' property. Occasionally required to travel.
This position is categorized as safety-sensitive for the purpose of drug testing. Successful applicants shall be subject to a pre-assignment drug test if the individual is currently in a non-safety sensitive position. As an employee in this position the individual shall be subject to random drug testing. A positive drug test will result in disciplinary action.
Number of Openings:
Eversource Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, sex, sexual orientation, gender identity, national origin, religion, disability status, or protected veteran status.
VEVRRA Federal Contractor
Corrosion Technician, Level 1-4 (Odessa, TX)
The Corrosion Technician must also ensure compliance with company policies, procedures as well as federal and state regulations. Essential Duties and
Responsible for all activities related to corrosion control (external/internal) and pipeline integrity
Cathodic protection includes recording annual pipe-to-soil readings, rectifier readings, bond readings, road casing status, insulated effectiveness with the Allegro. Analyze and make recommendation on data collected.
Troubleshooting rectifier units, remote monitoring, performing interference testing, designing, overseeing installation, and performing as-built drawings for needed cathodic facilities.Design, install, operate, and maintain cathodic protection facilities, power lines, galvanic anodes on gathering systems, mainlines, and storage field.Supervise contractor on new rectifier / groundbed installations and complete job data book.Supervise contractor on Close Interval Survey(s) and analyze data collected. Develop action/closure plan.Monitor the condition of the pipeline through pipe-to-soil potentials, visual inspection, examination of coupons, data from in-line tools, etc.Conduct various tests, measurements, and surveys to ensure efficient operation of cathodic protection facilities.Perform atmospheric inspections and document findings on the PCS-CPDM. Prepare any mitigation plan.Internal corrosion responsibilities include installing coupons, collecting samples, evaluating results, and make any necessary changes required to internal corrosion control program.Document all related work associated with performing and maintaining regulatory compliance and operating and maintenance procedures.Prepares drawings, job specifications and contract bid documents
Prepare and present the corrosion data for the external and internal annual corrosion review.Prepare and participate in federal inspections.Inspect 3rd party construction / work activities
Mentor fellow employees when the opportunity presents itself
Assist in preparing the O&M / Capital Budget for corrosion control.Respond to/address callouts and emergencies outside of regular business hours.Will be required to carry a company-provided cell phone and be available to respond during working and non-working hours.Other duties as assigned The successful candidate will be required to clear a drug screen and a complete background check, after an offer has been extended and prior to being employed
Job level commensurate with experience and skill sets
High School diploma or equivalent with 1-3 years of pipeline experience. Certifications, Licenses, Registrations:Approved educational courses in all phases of corrosion including internal, external, and atmospheric corrosion.Must possess and maintain a valid driver's license and a driving record satisfactory to the company and its insurers.Achieve and maintain all qualifications, certifications, and progression requirements applicable to the job classification
Completion of any site specific technical training may be applicable Experience / Specific
Understand and operate all corrosion related instrumentation
Working knowledge of environmental and safety aspects of coating projects
Working knowledge of AC and DC electrical systems
Proficient with computer skills (MS Office, operating systems, company software, and technical systems) • Basic Math skills (addition, subtraction, multiplication, division, fractions, decimals, etc) Competencies, skills, and abilities:Ability to complete work assignments with minimal supervision in an acceptable time frame.Ability to operate and maintain chemical injection and pressure access equipment.Ability to estimate installation, operating and maintenance expenses associated with corrosion systems.Ability to complete work assignments with minimal supervision in an acceptable time frame
Ability to operate and maintain chemical injection and pressure access equipment
Ability to estimate installation, operating and maintenance expenses associated with corrosion systems.Ability to effectively organize, plan, prioritize, document, and complete work independently.Ability to successfully work in team environment.Overtime will be required.Must be able to work with a team, take direction from supervisor(s), prioritize work schedule, focus attention on details, and follow rules.Strong communication skills both verbally and in writing.Safe work practice and active participation in the safety program.Depending upon the location and workload, travel will be required Working Conditions / Physical Demands: Must be able to withstand extreme weather conditions
Must be able to frequently, enter confined spaces, climb to and work from elevated platforms, excavated areas, ladders, walkways, etc.Must be able to lift a minimum of 20 pounds in awkward positions, and ability to lift 50 pounds from floor to waist (occasional).Be available for shift work when applicable.NACE certification
Experience in all phases of corrosion control and pipeline integrity as described in the Job ResponsibilitiesExperience with PCS-CPDM and RStrengWorking knowledge of AC and DC electrical systems, corrosion related portions of NEC, and NACE standards
Knowledge of company policies and DOT regulations
Knowledge and experience with safe handling practices of products (gas and liquids). The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned. Preferred education, experience, certifications, competencies, skills, and abilities:Above the minimum requirements; not required but advantageous in this position:A technical or associate degree in a related field or equivalent from an approved and accredited college or university.NACE certification.Experience in all phases of corrosion control and pipeline integrity as described in the Job Responsibilities.Experience with PCS-CPDM and RStreng.Working knowledge of corrosion related portions of NEC and NACE standards.Knowledge of company policies and DOT regulations.Knowledge and experience with safe handling practices of products (gas and liquids).
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Corrosion Control Engineer
The Buildings & Infrastructure Line of Business is a global network of employees, which serves both the private and public sector. Our employees work to shape the communities we live in by creating world-class projects that transform the future development patterns of those communities.
We provide our clients award-winning planning, engineering, architectural and interior design, construction and program management, and design-build project delivery. The Jacobs business model allows us to successfully service our clients, leverage our integrated services, and provide our employees with growth opportunities while delivering global solutions to our client's local programs.
We consistently receive high rankings from Engineering News-Record (ENR) in many classifications, including the categories of Top Design Firms, Top Contractors, Top Green Buildings Design Firms, and Top Transportation Companies.
This position will help provide and sustain clean water resources for our clients around the world and have a hand in transforming tomorrow. As a Corrosion Control Engineer, you will have the chance to lead corrosion control studies, designs, construction support, and condition assessments of water, wastewater, storage, and conveyance projects.
Working with other members of our team, you'll use your skills and experience in cathodic protection, protective coatings and linings, materials selection, and condition assessments to support our projects, globally. During your time with us, you will analyze the corrosivity of the environment, develop alternatives for corrosion control within established design criteria, design the preferred corrosion control systems, and support construction. If you're up for the challenge, we've been looking for someone just like you. Join our team and help us lay the foundation for human progress.
Our Corrosion Control Technologists:
Provide technology guidance and expertise for water, wastewater, storage, and conveyance projects.
Actively support business development pursuits, where corrosion control technology is often a differentiator.
Participate in project decisions regarding technical approaches, cost and scheduling performance. - Mentor staff associates within selected technology area and supervises and reviews the work of others.
Maintain a close relationship with clients and tracks upcoming project opportunities and collaborates on project pursuits.
Bachelors or Masters in appropriate engineering field.
8 to 10 years of corrosion control experience.
The ideal candidate will possess the following skills and experience:
Professional Engineering license
Cathodic protection system planning, design, operation, and analysis
Protective coatings and linings specification, inspection, and failure analysis (including lead paint abatement)
Materials selection, including metals, plastics, and fiberglass
Buried pipeline corrosion control
Water and wastewater treatment plant corrosion control
Buried and elevated storage tank corrosion control
Condition assessment of all of the above
At Jacobs, we help prepare people for new opportunities and challenges. With positions at every level, openings in multiple disciplines, expertise in a range of markets and offices around the globe, we create an environment where you can learn, grow, and thrive. From our competitive benefits program to our Health and Safety initiative of Beyond Zero workplace injuries, we believe that you'll find a flourishing career here at Jacobs.
Pipeline Corrosion Integrity Technician
- The tissue in plants that brings water upward from the roots;
- a leading global water technology company.
We're a global team unified in a common purpose: creating advanced technology solutions to the world's water challenges. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. Our products and services move, treat, analyze, monitor and return water to the environment, in public utility, industrial, residential and commercial building services settings. Xylem also provides a leading portfolio of smart metering, network technologies and advanced analytics solutions for water, electric and gas utilities. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise with a strong focus on developing comprehensive, sustainable solutions. For more information, please visit us at www.xylem.com
If you are excited and passionate about helping us solve water, we want to hear from you!
PureHM is the Oil and Gas division of Pure Technologies, a world leader in the development and application of innovative technologies and solutions. We are an industry-leading company that offers a range of technology-driven services and innovative products for oil and gas pipeline operators. In January 2018, Pure Technologies was acquired by Xylem, a leading global water and energy technology company committed to developing innovative technology solutions to the world's water challenges. At PureHM, our people are the key to our success. We take pride in recruiting the best talent available for all areas of our business.
The Role: The Pipeline Corrosion Integrity Technician is responsible to perform duties associated with pipeline integrity and corrosion control inspection surveys and assessments. This is a position that requires relevant technical skills, NACE CP1 or CP2 certifications, field leadership and the ability to work independently. This is an excellent career opportunity for cathodic protection and integrity technicians looking to broaden their technical experience and exposure to broader pipeline integrity challenges.
Plan & perform annual cathodic protection adjustive surveys, which includes: measuring & recording structure-to-soil potential data, rectifier monitoring & maintenance, soil measurements
Serve as the technical Lead for the project, assist personnel as needed with troubleshooting and dealing with any technical or equipment difficulties.
Provide regular project progress reports to the Project Manager, ensuring an effective communication including all pertinent project details.
Process Field data utilizing specialty software for analysis and client presentation
Locate and map pipelines and document positional pipeline information utilizing electro-magnetic and GPS equipment
Perform over-the-line depth of cover, close interval cathodic protection and coating surveys, DOC, ACVG, DCVG & Watercourse surveys utilizing XLI equipment and /or other equipment.
Document physical features of installation site for subsequent detailed as-built drawings
Assist senior personnel in the preparation of survey reports and final job reports
Operate and maintain company vehicle and other equipment
Capture multiple data streams and troubleshoot, wearing backpack and carrying probes daily. Operate advanced field test equipment including GPS receiver, pipe locator, survey pack, & handheld PDA
Review/download documents of record. Prepare custom reports, daily project and safety checklists
Perform water course mapping and bathymetric surveys
Perform inline tool tracking (remote and traditional)
Launch and receive and Inline leak detection tools including tool preparation, data review and processing
Education, Experience, Skills, Abilities, License/Certification:
Must have a minimum of NACE CP1 to be considered or your application will be rejected, prefer NACE CP2.
Pipeline/oil field experience is not essential but is considered an asset
Previous experience in a field-based capacity is preferred
Familiarity in surveying, line locating, GPS, ATV and boating experience a plus
Applicable technical degree or diploma is considered an asset
Enjoy working outdoors in varying weather; heavy travel throughout U.S for defined periods
Previous corrosion, cathodic protection, and project coordination experience required
Solid organizational skills, able to prioritize and track multiple projects concurrently
Positive attitude, teachable – brings continuous improvement to role and company
Intermediate Microsoft Office Applications (Word, Excel, Outlook) and PC Skills
Experience tracking inline inspection and cleaning tools and/or supporting the preparation, launching and receiving of ILI tools would be considered an asset
(The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)
Regularly required to sit or stand, reach, bend and move about the facility
Must be able to lift up to 50 lbs.
(The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)
Clean driver's license with ability to secure passport.
Expect up to 12 hours per day during away periods. No more than 24 days straight before time off periods.
Average 175-195 days per year in the field. Except for training, time home is time off
Travel Requirement: < />
EOE including disability and veteran
The New Iberia facility specializes in cold box assembly and fabrication, pressure vessels and other cryogenic equipment as used for the air separation and hydrocarbon industries.The end users of this equipment include all the major LNG, petrochemical and air separation engineering on a worldwide basis. The facility is located at the Port of Iberia.
What Your Day-to-Day Activities Will Be…
Assist in developing and implementing shop standards and improvements
Provides instruction on fitting techniques, proper tools and proper procedures
Assists in developing and presenting formatted training materials
Works independently in all areas of the shop with fitters and welders in order to raise the level of quality in fitting and solving problems
Works to identify opportunities for technology improvements
Makes training recommendations to supervisors
Provides follow up reports to production supervision on observed deficiencies in fitting
Be able to identify fit up issues rapidly and address them quickly
Promotes safety, honesty and integrity on the job
Required to work at elevated heights up to 75ft
Add'l duties and responsibilities may be assigned
Your Education Should Be…
High school and/or technical program
Three years' experience in related field
Blueprint reading required
Knowledge of shop math preferred
Education may be substituted by extended experience
Your Professional Experience Should Be…
Must have through knowledge of departmental operations
Must have a complete support of safety procedures
Must have thorough knowledge of shop standards
Must be able to communicate professionally with people at all levels and remain calm and objective
Be a self-starter, creative thinker, reliable and able to work with minimal supervision
Chart is an equal opportunity employer
Fitter - Weekend Night Shift (Tulsa, OK)
801 N Xanthus Tulsa Oklahoma 74110-4949
Welcome to Valmont, where a world of opportunity awaits. When you join our team, you become part of a passionate group dedicated to changing lives and conserving resources around the globe. We want problem solvers who roll up their sleeves to foster progress and innovation for all people. At Valmont, we provide infrastructure, irrigation, tubing and coatings to the world. We strengthen cities. We nourish croplands. We design, manufacture and coat. Our products and services make a difference. Join us, and BUILD YOUR WORLD.
How you will contribute
Valmont is currently seeking a highly motivated and talented individual for the Fitter position in the Global Utility Division. We are looking for a highly driven individual that will layout, align, and assemble fabricated metal products used in electrical poles, substations, and other structures. Additionally, you will…
Work under the guidance of coworkers to fit components together in the shop from blue prints in preparation for welding
Assemble structural units that require fitting
Utilize hand tools and measuring devices in the performance of job tasks
Determine whether process specifications have been met prior to construction site assembly
Wear required personal protective equipment and follow facility safety regulations
Maintain a safe and productive working environment
Perform various other duties requested by the supervisor to ensure customer requests are met
What it takes
The ability to read and interpret blue prints to properly fit products
The ability to perform basic math functions such as adding, subtracting, multiplying, and dividing
The ability to communicate and interact with coworkers in a positive manner
The ability to work in a timely and expeditiously manner to deliver an on-time result without errors
Highly qualified candidates will also possess:
High School Diploma or GED equivalent
One year of previous experience in a manufacturing or fabrication environment
One year of previous hands-on welding experience in a professional environment
Must have a high awareness for safety at all times
The ability to identify and communicate maintenance or product problems to departmental supervision
The ability to work in a high volume, fast paced environment
Must be a person of passion and integrity who has the drive to excel and deliver exceptional results
Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
If you have a disability and require any assistance in filling out the application for employment, call (402) 963-1115 or email EEOCompliance@Valmont.com.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!