Countersinker Job Description Sample
Aircraft Test Tech A
Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
Mechanics will be working on a live aircraft. Employment in this position also requires standing, reaching, walking climbing/balancing, lifting less than 10 pounds, rotation of head/neck, exposure to energized sources and noise and the use of personal safety gear for face, eyes, hand and ears. Additional Tasks, Duties and Responsibilities Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
Perform tests using various computer systems, oscilloscopes, power supplies and meters. Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment ""STE"", Automated Test Equipment ""ATE"" and shop aids) adjust or repair. Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems. Order parts and components required to complete assigned task. Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems. Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems. Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander). Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions. Align parts and secure in place using Clecos or tooling/hand clamps. Check for good edge margins and alignment and shim parts, as required.
Handle and protect components and assemblies in accordance with shop procedures and drawing requirements. Set up assembly tools per tooling instructions or drawing. Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size, per drawing using drill motor. Set countersinking tools to proper depth, as required. Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
Use solvents to clean surfaces prior to sealing or assembly. Apply sealant, alodine, primer, adhesives and special finishes. Determine and obtain correct type and size fasteners.
Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner). Handle and dispose of hazardous materials in approved manner. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians.
Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Relocation Assistance Available
Yes. Available for eligible candidates, if authorized.
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
This is an hourly position governed by the IAM Collective Bargaining agreement. High school graduate or GED preferred.
"This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee."
Experience troubleshooting and fixing problems with various types of electronics equipment
Experienced reading and interpret production illustrations, wiring diagrams, and/or schematics
Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
Contingent Upon Program Award
Structures Technician - Dragon Spacecraft
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
Structures Technician – Dragon
Modification, repair, assembly, and installation of the rocket and spacecraft.
Use tooling holes, pilot holes, or by hand (as required), per drawing or tooling instructions.
Align parts and secure in place using clecos or tooling/hand clamps.
Check for good edge margins and alignment.
Shim and/or trim parts as required.
Select drill bits, reamers and/or countersinking tools for pilot and full size holes.
Locate, drill pilot holes using drill motor and proper size drill bit(s).
Drill, ream, countersink full size holes in parts/assemblies, in proper sequence and to correct size using drill motor.
Set countersinking tools to proper depth as required.
Disassemble parts and deburr holes using chip chasers, deburring tools, and files to prepare for installation of fasteners.
Use solvents to clean surfaces prior to sealing or assembly.
Apply sealant, alodine, primer, adhesives, special finishes.
Load and unload ovens to bond detail parts to assemblies
Handle and dispose of hazardous materials in approved manner.
Determine and obtain correct type and size fasteners.
Cold work holes to prepare for close tolerance fastener installation.
Install bushings into housings using arbor press and/or hydraulic puller.
Apply liquid nitrogen to facilitate installation of bushings.
Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing.
High school diploma or GED.
At least 5 years of structural assembly experience.
Preferred Skills and Experience:
Experience gained through the military or within an aviation manufacturing company is a plus.
High-volume manufacturing experience is a plus.
Drill, ream, hone and/or countersink straight and close tolerance holes.
Use various types of hand tools and/or hand-held power tools, floor-mounted power tools and precision measuring tools.
Capable of visualizing a three-dimensional shape from a two-dimensional view and understanding symbols, flag notes, and general notes.
Perform basic arithmetic calculations accurately (addition, subtraction, multiplication, division, decimals and fractions).
Make basic layouts on parts or assemblies in order to establish reference points and to check dimensions.
Read and interpret engineering drawings, blueprints, and specifications.
Operate computing equipment.
Must be able to work off-shift with minimal notice.
Must be able to travel to different sites, up to 5% travel.
Must be able to work all shifts and available for overtime and weekends as needed.
Repetitive assembly operations, grasping, standing, lifting, bending, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.
Must be able to lift up to 25lbs. unassisted.
- To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here.
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000.
We are currently looking for a Precision Grinder Temporary Night Shift to join our team!
With minimum supervision operates one or more of the following precision grinding machines to grind internal and/or external surfaces of metal objects to specified dimensions and finish: center-less, cylindrical, external, internal, surface, drill, broach, saw, gear, cutter and thread grinders. Requires ability to select and use all types of grinding machines. Abrasive wheels, holding fixtures, gages, micrometers, etc. Four place tolerances may be specified.
An Equal Opportunity Employer M/F/D/V
Grinds the cutting edge on counter-bores
Grinds the cutting edge on countersink cutters
Grinds the cutting edges on hole saws and arbors
Grinds precisely the inside diameter and outside of various products
Must perform grinding wheel safety test prior to installation
Other related duties as assigned
High School graduate or equivalent
In-house training programs participation as required to assure continuous quality improvement.
Is alert and safety conscious, thorough and conscientious
Must be able to precisely run a variety of grinding equipment such as Brown & Sharpe grinders, Cincinnati grinders, Studer grinders, Covel grinders, K. O. Lee grinders and CNC grinders such as a Walter
Must be able to read blue print with close tolerances towards degrees of cutting edge angle
Must be able to use precision measuring instruments such as calipers, micrometer and height gages
Snap-on is a drug free work environment and an Equal Opportunity Employer, Minority/Female/Disabled/Veteran.
Job descriptions/specifications are only intended to present a descriptive summary of the range of duties, tasks, and responsibilities associated with a specified position. Therefore, descriptions/specifications may not include all duties performed by the individual. In addition, description/specifications are intended to outline the minimum qualifications necessary for entry into the position/class and do not necessarily convey the qualifications of incumbents within the position/classification. An EOE employer
Drywall Finisher Mechanic
Drywall Finisher Mechanic
Seals joints between plasterboard or other wallboard's to prepare wall surface for painting or papering by performing the following duties:
Essential Duties and Responsibilities:
Mixes sealing compound by hand or with portable electric mixer and spreads compound over joints between boards.
Presses paper tape over joint to embed tape into compound and seal joint or tapes joint, using mechanical applicator or Broad-knife that spreads compound and embeds tape in one operation.
Spreads and smooths joint compound material over tape to blend joint with wall surface.
Sands rough spots after compound has dried.
Fills cracks and holes in walls and ceiling with sealing compound.
Installs metal molding at corners in lieu of sealant and tape.
Applies texturing compound and primer to walls and ceiling preparatory to final finishing (if applicable).
Countersinks nails or screws below surface to wall prior to sealing compound.
Candidate should exhibit excellent organizational skills and the ability to multi-task.
Repetitive motions using applicators and rollers.
Constant walking, steeping, squatting, bending, kneeling, climbing on scaffolds, and carrying materials.
Must be able to lift between 20 – 124 lbs.
This job also requires some drywall framing, hanging and sanding.
Work Environment/Working Conditions
Employee will work in a busy, informal, yet professional office environment at times. The noise level is usually moderate but may be high while employee encounters field operations.
Precision Walls is an Affirmative Action, Equal Opportunity Employer of women/minorities/disabilities/veterans. We are an e-Verify employer and all candidates must pass a drug test.
AZZ Enclosure Systems
To install and wire components that are required to monitor, operate, and control metal clad switchgear.
ESSENTIAL FUNCTIONS (other duties may be assigned):
Connects wiring between components according to the wiring print, specification sheet, and Bill of Material using hand tools such as screwdrivers, strippers, crimpers, etc.
Prevents on-the-job injuries by attending safety meetings, fork lift training, wearing safety glasses, shields, steel-toed shoes and harnesses, etc.; cleaning work area; and maintaining awareness of hazmat manuals, ISO Standards, and safety stations.
Crimps appropriate size and type of lugs to wire ends by using a hand crimping device.
Installs wiring, lugs, and assembles/installs components such as switches, heaters, and relays and other apparatus in a frame, panel or other structural support according to design specifications.
Lays out, routes, and ties wire to panels by using wiring bundles, bundle holders, clips, and bushings and other protectors with hand tools.
Positions, aligns, and adjusts wires and components to facilitate wiring and assembly of product.
Attach wire labels.
Drills, taps, reams, countersinks using drill presses and portable power drills.
SUPERVISORY RESPONSIBILITIES (list below, if applicable):
Equipment Used: Hand tools such as screwdrivers, strippers, crimpers, tape measure, etc
Certificates, licenses, and registrations: None.
Able to read tape measure and electrical point-to-point prints.
Education/Experience: High school diploma or equivalency (GED) preferred, but not required
Able to read and comprehend simple or somewhat complex instructions. Able to write notes or simple correspondence. Able to effectively communicate information to coworkers
Able to perform simple addition, subtraction, multiplication, and division calculations using whole numbers as well as decimals/fractions. Able to calculate and interpret common tape measurements.
Reasoning Ability: Able to apply common sense understanding to carry out multiple-step instructions of moderate complexity. Able to deal with standardized situations with a limited set of variables.
Attendance Requirement: Requires regular attendance during scheduled shift and overtime as required.
Travel Requirement: None
Physical Demands: Manufacturing position; spends more than 2/3 of time standing, kneeling/crouching/stooping, using hands, and reaching. Spends app. 1/3 of time walking and talking/hearing. Generally requires clear vision at close distances (for reading prints/instructions and marking reference points
Work Environment: Industrial manufacturing environment. Facility is enclosed and is ventilated, air conditioned and heated. Steel toe shoes, safety eye wear, required. Gloves, face-shield, and other PPE as needed.
General Mod Mechanic
Job Description: :
PERFORMS SUCH TYPICAL DISTINGUISHING DUTIES AS:
Determines methods and sequence of modifications, disassembles, assembles, makes locations, installs and mates completely various types of products, assemblies and installations, where complete information is not readily available, operational sequences change or vary considerably, and tooling is inadequate or not provided; lays out for and locates to all reference points, and secures coordination of assemblies in modifying metallic and nonmetallic structures and installations, including all rework, pickup and incorporation of design and modification changes working to station, water, center, butt and chord lines shown in engineering documents; performs all assembly operations such as pickup and rework on metallic and nonmetallic structures and installations requiring reforming, recontouring or refitting; performs the final sealing and pressurization of modified structures and installations on incomplete or complete products which materially alter previous assembly reference and sequences; assembles complete, installs and connects and services power plants, accessories and functional units, where it is required to exercise a knowledge of power plant assembly, rigging, final assembly, composites, installation, servicing and conversion method and techniques.
Must possess certifications required by the Company. Must possess a knowledge of or have completed training in Blueprint II, repair technology, operation of ground support equipment, and principles of operation of aircraft systems. Must have basic knowledge of composites fabrication as it relates to structural modification.
Must have a minimum of two years of experience in aircraft assembly and installation.
PERFORMS SUCH RELATED DUTIES AS:
Installs shortages, incorporates design or modification changes in metallic and
nonmetallic structure, functional systems, power plants, components and accessories; makes adjustments, synchronizations, alternations, repairs, corrections, and replacements as required.
Collaborates with authorized Company, customer and/or vendor liaison personnel in correcting malfunctioning items.
Works with blueprints, diagrams, sketches, service bulletins, maintenance manuals and technical orders.
Hooks up and operates all types of ground support equipment.
Cures sealants using hot air, heat blankets, lamps and other curing methods.
Repairs components of precision functional assemblies such as valves, cylinders and pumps; disassembles, replaces and realigns parts, adjusts to appropriate settings, retorques fittings, reassembles and functionally tests completed power plant units as required prior to transfer of aircraft to the flight line.
Performs bonding operations in the assembly of composite parts.
Performs final finishing, grinding, and polishing of parts as required.
Drills, reams and countersinks holes and installs fasteners as required.
Processes engines for short or long term storage and maintains them to applicable specifications.
Performs sealing and other rework operations on major structures. Installs plumbing, rigging and other functional items and makes air and vacuum checks as required.
Performs satisfactorily any function of the Assembler
Installer, Senior Hydraulics and Controls Installer, and Assembler
Heat Area classifications.
Active Secret Clearance with investigation within the last 5 years.
Minimum of two years of experience in aircraft assembly and installation.
Must be able to attain a Final Secret clearance and Special Program Access prior to start.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Job Location(s): Palmdale California
Security Clearance :
Business Unit :
ESS0343 AERONAUTICS COMPANY
Job Class :
Job Category :
Relocation Available :
Work Schedule :
FLEX9x80A-Friday off in 2nd week w/flex hrs/day
Req Type :
Additional Posting Locations :
Job Title: Inspector
Reports to: Quality Manager
Quality Inspector I performs routine inspection on structural and mechanical assemblies/subassemblies, and detail parts. Personnel are also capable of supporting peripheral responsibilities as defined by Quality Management.
Responsibilities include but are not limited to:
Obtain engineering specification for any given assembly/subassembly and detail part.
Verify engineering specification for any given assembly/subassembly and detail part.
Verify all operations of a production work order have been completed per engineering requirements.
Create and disposition NCMR within the ERP system.
Minimum Job Requirements:
Must be able to verify distinguish pass/fail characteristics of close tolerance holes and basic fastener installation requirements.
Must be able to properly use calipers, micrometers, depth gages, height gage, radius gages, countersink gages, scale and pin gages.
Must be able to interpret 2D blueprints, technical specifications, inspection documents, and written/verbal instructions.
Must be able to inspect operations performed and recognize defects as dictated by IP/engineering requirements.
Must be able to maintain and update any required training.
Must be able to work cooperatively in a team environment.
Must have focus on Quality and have a clear understanding of risk escapement and potential impact to product.
High School or GED equivalent/previous experience desired
Must be authorized to work in the United States. International Traffic in Arms Regulation/Export Administration Regulations (ITARE/EAR) clearance is required
Other Knowledge, Skills, And Abilities Required:
Knowledge and understanding of QMS processes and standards.
Ability to gather data, compile information, and prepare reports.
Ability to communicate effectively, both orally and in writing.
This position will require an employee to perform the following functions effectively, with or without reasonable accommodation.
Effective use of a computer keyboard and software
Effective use of telephone and other applicable electronic communication equipment.
View and read documents, and computer monitors.
Verbal communication with Quality team members and management.
Position will generally require sitting for prolonged periods of time.
Occasional requirements may include standing for prolonged periods, walking, climbing stairs or ladders, kneeling, crouching, reaching, balancing, and lifting and carrying a minimum of 25 lbs.
Manufacturing Awareness Training
Electrical Bond Training
OJT as defined by Quality Management and/or Production Customers relative to work being performed
Safety training defined by the organization and Management.
Equal Opportunity Employer
LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI's Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.
LMI is an E-Verify Employer.
LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer
Paint Associate -- 2Nd Shift
4 day work week! Quarterly profitability bonuses!
Hours: Monday-Thursday 3pm-1:30am
Lantech believes in building up our associates we give you the skills you need to advance in your career!
Ask us about our Skills Progression Program!
Lantech is the premier manufacturer in stretch wrapping machines in the United States and in case handling machines in the Netherlands. We have sales and technical support offices in North America, Europe, Australia, and China as well as a global network of independent distributors, integrators and service technicians. Where our customers are, we are.
Comprehensive benefits package that includes a four-day manufacturing work week plus eight paid holidays per year and vacation; quarterly profitability bonus; medical, dental and vision insurance plans; 401(k) plan; free life insurance; casual dress; and safety gear reimbursement. Plus other perks such as quarterly company events, perfect attendance drawings and skill development learning opportunities.
Position includes a variety of work associated with a production paint line including part washing, part dry off, plugging/taping holes, loading parts onto line, unloading parts off the line and delivering parts to assembly areas. Position also includes installing threaded inserts using a pneumatic gun as well as countersinking and taping holes on a plate using a radial arm drill.
Will be required to learn all aspects of a production powder coating paint line.
Must be willing to operate a fork truck and pass internal assessment
Must be quality conscious and able to identify poor quality from process to process including final paint finish.
Must be a team-oriented individual with good interaction / communication skills.
Must be willing to work overtime as needed to meet schedule requirements
Must have a proven record of good attendance.
Will be standing for at least 9 hrs. / day
Must be able to lift 50 pounds
Desired Skills/Experience: Any previous production experience
Education: High school diploma or equivalent is required. Additional training from vocational or trade school is a plus.
Starting Pay: $13/hour
Candidates must be experienced with assembly of composites parts/structures.
Assembles, installs, and/or mates structures, functional units, parts and equipment including ground support equipment where information is furnished, sequences are standardized and assemblies are coordinated, tooling is provided or locations are determined from a previously established reference point by the direct measurement from such points as edge of parts, previously located holes, ribs, stringers, bulkheads, floor panels or other installed units; works the assembly in proper sequence, loads jigs and does necessary operations to complete the assembly, either in or after removal from jig; performs such assembly and installation operations as reforming of parts to correct contour, crimping, trimming and filing parts to fit, framing, skinning, drilling, reaming and riveting assemblies, and attaching fittings and installations required to obtain a finished structure or functional unit; modifies incomplete and complete assemblies to incorporate in or out-of-station changes to structure and/or installation, when pertinent information is supplied and normal installation practice is not affected; disassembles and/or reassembles structure and installations, where units are returned to their original position, or where their position previously has been established. Performs rework of the level of difficulty of the operations described above. Must possess a minimum of 5 year assembly and installation experience.
PERFORMS SUCH RELATED DUTIES AS: Improvises simple shop aids to facilitate installation and assembly.
Drills, reams and countersinks holes and fittings; trims and files parts, torques and safety bolts as required. Fabricates structural items such as clips, angles, gussets and patches, ECT. Installs incidental plumbing, electrical, rigging, or other functional items, as required by practical assembly sequence, where locations are made by direct measurement from established reference points; applies sealing compounds, insulation and adhesives as required in normal work assignments. Presses in bushings or bearings when required.
Five years professional aircraft work experience
Must have basic mechanical skills
Well rounded knowledge of sheet metal tooling, equipment, materials, and processes, Composites
Must take instruction and guidance well
Must be goal oriented, have an exceptional attention to detail, and must work well in team situations and also as an individual
Must be able to perform moderately strenuous physical tasks which include bending, stooping, kneeling and working overhead for long periods of time
We are PENGO, your #1 auger and related wear parts provider. With over 65 years manufacturing augers, we are proud to provide QUALITY, EXPERIENCE and EXCELLENCE in SERVICE. Located in Cokato, MN; we feel people make the difference and we are looking for a few Motivated, Reliable, Energetic candidates to join our Team.
Set up, operate, or tend drilling machines to drill, bore, ream, mill, or countersink metal work pieces.
Essential Duties and Responsibilities:
Works from drawings, sketches and instructions to successfully produce required parts
Works under the close direction of supervisor
Uses a variety of tools and equipment such as machine tools, spin lathes, shear, saw, press brake, forming, drilling, punching, burning and related equipment to cut materials to size, shape and form
Checks work as necessary to assure holding prescribed tolerance and to maintain quality standards
Detects defective materials, unusual conditions or operating difficulties for reporting to supervisor
Ensures safe operation of all equipment, tools and processes as well as compliance with safety regulations and keeps work area and equipment in a clean and orderly condition
Verify conformance of machined work to specifications, using measuring instruments such as calipers, micrometers, and fixed and telescoping gauges.
Study machining instructions, job orders, and blueprints to determine dimensional and finish specifications, sequences of operations, setups, and tooling requirements.
Select and set cutting speeds, feed rates, depths of cuts, and cutting tools according to machining instructions or knowledge of metal properties.
Install tools in spindles.
Change worn cutting tools, using wrenches.
Position and secure workpieces on tables, using bolts, jigs, clamps, shims, or other holding devices.
Move machine controls to lower tools to workpieces and to engage automatic feeds.
Turn valves and direct flow of coolants or cutting oil over cutting areas.
Operate single- or multiple-spindle drill presses to bore holes so that machining operations can be performed on metal or plastic workpieces.
Establish zero reference points on workpieces, such as at the intersections of two edges or over hole locations.
Knowledge, Skills and Abilities:
Ability to read, understand and effectively communicate information through writing and speaking so others will understand
Attention to detail
Multi-tasking and organizational skills
Independent Self-Starter/Team Player
General Arithmetic/Basic Algebra/Basic Geometry/Percentages
Ability to distinguish colors
Ability to run powder coat paint system
Ability to spray paint
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!