Crook Operator Job Description Sample
Rough Knot Saw Operator
Being an industry leader would not be possible without a winning team. Unilin Flooring is constantly looking for creative, innovative, and enthusiastic winners like yourself to join our team in the areas of Human Resources, Finance, Operations, Marketing, Sales, and Logistics/Supply Chain. We offer a variety of challenging and exciting career opportunities at our different operations facilities locations and headquarters office in Dallas, TX. Unilin Flooring is dedicated to attracting, developing, and retaining winning team members in every aspect of our business. Start your career search today and find the perfect fit!
Works at a crosscut saw to remove defects from rippings prior to going to the side matcher as follows
The rough knot sawyer should have a good understanding of the flooring grade rules so in order to perform his/her job satisfactorily.
Removes the following defects from rippings by the use of the crosscut saws, splits, shake, knots larger than ½ inch in diameter, obvious rot, tapered and scant rippings, knots that extend through the entire width of rippings, excessive wane, cross grain. Remove all defects that will cause the side matcher to plug and all defects that are not allowed in any approved grade of hardwood flooring.
All long rippings that have excessive crook should be cut in such a way to minimize the crook. Also rippings that exhibit excessive back bow should be crosscut similarly.
Rough knot sawyers are to always observe the quality of rippings coming from the ripsaw and notify an appropriate supervisor when they are substandard.
All cuttings shall be made as close to the defect as possible. The maximum allowable cut shall be no more than ¼ inch from the defect to be removed.
Most defects are removed by simply cutting through the knot or defect
Maintain a clean and safe work environment.
High school diploma or general education degree (GED
One to three months related experience and/or training; or equivalent combination of education and experience.
Ability to read and interpret documents such and safety rules, operating and maintenance instructions and procedure manuals.
While performing the duties of this job, the employee is regularly required to:
Stand, walk, stoop, kneel, crouch, or crawl, use hands to finger, handle or feel objects, tools, or controls.
The employee must regularly lift and/or move up to 25 pounds.
Work near moving mechanical parts.
Is regularly exposed to fumes or airborne particles and vibration.
Work in a normally loud / noisy work environment.
Intermediate Rotomold Operator - 2Nd Shift
Tennant is a recognized leader in designing, manufacturing and marketing solutions for industrial and commercial markets, with more than $820 million in annual revenues. With a vision to become a global leader in water-based sustainable cleaning and other technologies, Tennant creates innovative solutions, such as our ec-H2O products, that are changing the way the world cleans.
Tennant employees work to create a cleaner, safer, healthier world. Tennant is a company that cares about what it's doing, and the sustainability of its products, and works every day to develop new solutions that clean exceptionally well, but don't damage the environment. Employees of Tennant Company work with a spirit of Stewardship. Very simply, Stewardship is a filter for our actions and decision-making, as we strive to leave things in better condition than when we found them.
Tennant is seeking a 2nd Shift Intermediate Rotomold Operator to work 2:00 pm to 10:00 pm. The Rotomold Operator is responsible for successful operation of rotational molding machines to form plastic molds, produce tanks and other molded components. Rotomold operators will start out with new hire on the job training on first shift for approximately a month and a half prior to transitioning to their assigned shift.
Programs and maintains the operation of the rotomold machine including start-up, shutdown, temperature adjustments, fills roto-mold buckets with powder, pulls completed parts, scrapes clean and cuts out parts per work instructions. The operations require the enhancement of appearance, function and safety for the product. Ensures quality of all outgoing products.
Process requires some troubleshooting and adjustment to complete assigned tasks.
Carries out detailed written and oral instructions.
Provides guidance and training for others within the department.
Assist with daily tool maintenance with mold prep, soda blasting seams, polishing seams, power-washing mold and adjusting latches
Review product on the machine and take visual inventory
Review dimensional requirements and insure quality expectations are being met
Review returned parts from non-conformance, discuss part issues with engineer/supervisor and related production Operators
Maintain process portion of mold manuals and process parameters within the machine controls. Update the process information
Fill roto-mold buckets with powder used in the molding process
Facilitate troubleshooting of process related problems
Hi/low air issues
Uneven wall thickness distribution
Holes forming on seams, part surfaces, and around inserts
Mold venting / airlines
Causes of part variations for size
Causes of part warpage
Causes of part color variations
Causes of insert crooked / loss of location
Causes of over cured/ under cured part
Mold – in – graphics application
Secondary operations ( cutout fixtures, dimensional fixtures, cooling fixtures)
Pull completed parts from machine molds
Scrape finished parts clean
Use jigs, fixtures & routers to cut-out parts per work instructions
Flame finished parts to assure smooth surfaces
Clean molds and/or work area as required
Change/assist in the changing of molds as required
Water tests parts as required
Ensures production quality of all outgoing products, using check fixtures to assure correct shrinkage and to maintain necessary tolerances within the production process
Maintain on-going count of parts produced during regularly scheduled shift
Movement of tools, raw materials, work in progress and finished goods materials into and outbound of the department
Performs other duties as assigned
REQUIRED EXPERIENCE & EDUCATION:
High School Diploma OR G.E.D. OR equivalent
2+ years of rotational molding and/or injection molding experience
Previous experience scheduling short-term work, guiding/training others and troubleshooting process problems
Must possess a current forklift license
Must be legally authorized to work within the United States without sponsorship
Ability to coordinate and manage all production scheduling of work including change overs, parts to run and quantities required
Ability to lead within a team or group of individuals
Ability to enter/save on the machine program and send to arm
Ability to understand cure levels and cooling times and how part quality is effected using temperature system
Ability to be trained on multiple production lines
Ability to carry out detailed written or oral instructions
Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees
Ability to deal with problems involving complex variables in non-standardized situations
Ability to use basic hand tools, jigs, fixtures and routers to cut-out parts
Ability to work with without direct supervision
Ability to use Microsoft Outlook for email
Ability to understand majority of roto-mold blue prints from Engineering Drawing Locator
Ability to navigate and use Microsoft Windows, Drawing/method layout Locator and Autotime
REQUIRED PHYSICAL DEMANDS:
Must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move 75 pounds
Specific vision abilities include close vision, color vision, depth perception and ability to adjust focus
Regularly required to stand, use hands to grip, handle or feel objects, tools or controls and reach with hands and arms
Frequently required to walk, talk and hear
Routinely and regularly works near moving mechanical parts
Frequent exposure to hot conditions
Occasionally exposed to non-toxic fumes
Moderate noise level
REQUIRED INTERPERSONAL & BEHAVIORAL SKILLS:
Ability to problem-solve.
Ability to concentrate on tasks, make decisions and work calmly and effectively in a high-pressure, deadline oriented environment.
Willingness to be flexible with time and adjust to a changing work environment.
Ability to build and maintain positive relationships, both internally and externally, while maintaining a client service orientation.
Ability to use sound judgment and discretion in dealing with highly confidential information.
Consistent attendance either onsite or remotely as needed by the business.
Ability to take direction and accept supervision.
Demonstrated ability to work independently, organize and accurately prioritize work, be detail-oriented, understand when urgency is required and use good judgment in varied situations.
Equal Opportunity Employer
Tennant Company is an equal opportunity employer. Employment decisions are made on the basis of individual skill, ability, reliability, productivity, and other factors important to performance. We do not discriminate on the basis of race, color, creed, religion, sex, national origin, physical or mental disability, age, veteran status, pregnancy, sexual orientation, genetic information, gender identity, or any other basis protected by state or federal law or local ordinance.
PBX Operator / Communications Operator / Telephone Operator / Call Center Representative / Receptionist / Customer Service Representative PRN
Medical City Plano
PBX Operator / Communications Operator / Telephone Operator / Call Center Representative / Receptionist / Customer Service Representative
PBX Operator / Communications Operator / Telephone Operator / Call Center Representative / Receptionist / Customer Service Representative processes calls and pages. The Operator takes an active role in communication for emergency codes, conditions, and drills. The Operator also monitors security alarms.
High school diploma/GED preferred
PBX experience preferred
Minimum of two years of heavy multiline phone experience is required
Material Handler / Forklift Operator
Evans Distribution Systems has an immediate opening for a Materials Handler / Forklift Operator for our customer's operation in Troy, MI. The operation is located near the intersection of West Maple Road and Crooks Road. This is a full time position, 7 am to 4 pm. The starting pay is $12 per hour.
The Materials Handler is responsible for the safe movement of materials within the warehouse and production areas. They must have computer skills to assist the Shipping and Receiving Supervisor with transactions in the warehouse management system (WMS). They must also assure that the goods in storage are organized and in the proper location.
Locate received goods in the warehouse area, scanning location of product into WMS.
Must process receipts/bill of lading in our WMS/Infor. SAP
Move goods from warehouse area to production area using a pallet jack.
Move finished goods from production area to finished goods storage area using a pallet jack.
Label product designated for shipment.
Cycle count product to assure accurate inventory and location.
Help maintain cleanliness of warehouse and building grounds.
Handle customer products with integrity.
Perform all duties in conformance with appropriate safety and security standards.
Assist in warehousing operations as needed, and all other miscellaneous duties as requested by supervisor
Maintain the facility's equipment and materials with integrity in a neat, clean, and orderly fashion
Responsible for awareness and compliance with warehouse work rules and company policies
High school degree/GED.
1 year experience driving a forklift is a must.
Average ability to use and navigate warehouse management systems.
Communicate via email.
Must be able to pass all pre-employment testing (includes background check).
We only consider resumes that are submitted through our website: www.EVANSDIST.com/careers.aspx.
For more information please contact our HR Department at 313-827-9180
Operator Helper - Equipment Operator
Under supervision, perform semi-skilled manual work in connection with an entry level position in power plant operation. Assist equipment operators while learning the following job duties:
Isolate, clean, open, replace, inspect, close and return to service plant equipment. Isolate equipment and place/remove clearance tags in the plant and switchyard. Operate, regulate, adjust, clean and perform minor maintenance on plant auxiliary systems.
Monitor and inspect all plant equipment for normal operation. Identify and report abnormal conditions to the proper authority and write work orders. Operate, clean, service and lubricate portable power driven tools and equipment.
Maintain tools, equipment and work areas in a clean and orderly condition. Utilize portable meters, analyzers and equipment to conduct tests and monitoring. Lubricate and check lubrication equipment; adjust packing glands as necessary and perform necessary operative maintenance, using appropriate hand tools.
Operate oil filtering equipment. Erect and remove simple scaffolding and rigging. Perform routine cleaning of plant areas and equipment, including outside areas, as assigned.
Load, unload, move and handle materials, supplies and equipment; open boxes, barrels, bags and other materials using material handling equipment.
Monitor water chemistry as required. Maintain water pH and follow EPA guidelines as applicable.
Assist in preparing boilers and auxiliaries for operation and removal from service. If applicable, monitor coal feed to mills and burners and observe conditions of fires and furnaces. Hand lance slag in boilers, hand- operating soot blowers, unplugging ash lines, disposing of clinkers and other similar work.
Use flow diagrams to identify system piping and equipment and revise these prints as required. Make required equipment checks and assist in performing tests and preparing related reports, graphs and curves. Perform duties in accordance with Company's safety rules, operating regulations and practices and report unsafe conditions and practices.
Train for and carry out assignments in firefighting, first aid and other emergency response programs as required. Perform other job duties as assigned.
Operator Tech I - Wireline Operator
Demonstration of wireline operations technical skills and practical applications, including supporting surveying and wireline logging services, conducting rig-up and rig-down of down hole equipment, disassembly of tools, and post-job on-site equipment testing.
Operate heavy equipment such as Wireline Trucks, Manlifts, Bucket trucks and Forklifts. Support other projects at the Geysers such as performing steam well and pipeline maintenance and assisting with Steamfield and Power Plant operations.
Routine maintenance of wireline equipment at jobsite and assembling tools.
Performing rig-up procedures and installations at jobsites.
Performing safe operation of crane and sling loads.
Performing pre-job preparation of wireline equipment, wireline units, survey jobs and ensuring completion of pre-job logistics.
Removing and disassembling tools and equipment in the field.
Carry out post-job shop responsibilities, including cleaning, servicing equipment, office equipment testing, and accurate and timely submission paperwork and related files.
Preparing and maintaining documentation for jobs, daily reporting, and all applicable administrative functions.
Perform general shop duties for tools and equipment.
Comply with applicable safety standards and maintain a safe working environment
Cooperate with management in promoting, developing and maintaining a safe place of work and safe working practices, meeting all applicable health, safety and environmental requirements
High School Diploma and attendance in trade/vocational school, military service, or equivalent.
Entry level; minimum 2 years directly related experience including understanding of health and safety regulations, and previous experience working with and around hazardous energy, chemicals and waste materials including knowledge of safe handling, storage,
Must have experience with machinery repair.
Must have strong mechanical aptitude and basic understanding of chemistry, physics, electricity and mathematics.
Must have a valid California or other state equivalent Class C license and be in the process of obtaining a Class B license.
Preferred Valid Active Commercial Driver’s License (CDL Class B, Minimum)
Preferred Two years previous experience in wireline and/or geothermal/oilfield industry.
Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities.
Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use
our website or to apply for a position, please send an e-mail with your request to email@example.com. Determination on requests for reasonable accommodation are made on case-by-case basis.
Please view Equal Employment Opportunity Posters provided by OFCCP
Send This Job to a Friend
Field Operator 2 - Marine Systems Operator
Northrop Grumman's Mission Systems Sector Undersea Systems Division is seeking a self-starting, motivated Field Operator 2 - Marine Systems for an excellent opportunity to join a dedicated team. The team designs, develops, tests, delivers, and operates advanced prototype, unique marine systems.
The qualified candidate will split time working ashore in Southern California and worldwide at-sea aboard commercial work boats. The field site personnel possess a wide variety of engineering disciplines including mechanical, ocean, electrical, and software engineering; drafting; mechanical and electronics assembly; and quality assurance. Candidates for this position are expected to contribute to this broad technical depth with good problem-solving skills and hands-on workmanship abilities. Ashore duties will focus on equipment maintenance and upgrades and operational qualifications and training. At-sea duties will focus on equipment readiness and operations in a high tempo environment.
The Field Operator must be able to work collaboratively in small, technically focused teams; prioritize and adjust tasks simultaneously to accomplish the project result; determine priorities to achieve the required goal on short and long term basis, and make decisions that have an impact on the organization's credibility, operations, and services.
This position is envisioned to be full-time with comprehensive benefits including health and dental insurance, paid time off, and matching contributions to a 401K retirement account. However, qualified candidates who desire part-time/deployment-only employment will be considered and are encouraged to apply. Part-time employees will work at-sea for weeks or months followed by extended time off without pay. Full-time employees will split time between working at-sea for weeks or months followed by working ashore at the Southern California field site.
This position is contingent upon the candidate obtaining a DoD Top Secret Clearance/eligible for SCI access.
High school diploma or GED
Five years of hands-on experience operating and maintaining marine systems, such as remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), or diving systems
Ability to work at-sea aboard a commercial vessel. Each at-sea assignment will typically last 45-60 days and employees are generally expected to support at least two at-sea assignments per calendar year. Annual physical exams are required to verify fitness for sea duty.
The chosen candidate be able to obtain and maintain a DoD Top Secret Clearance/eligible for SCI access; this requires US citizenship.
Active Top Secret Clearance/eligible for SCI access is desired.
Bachelor Degree in a STEM field such as mechanical, ocean, or electrical engineering
Prior military experience, preferably U.S Navy
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO. U.S. Citizenship is required for most positions.
Process Operator II - Preweigh Operator
1st and 2nd shift
Maintain a clean, safe and orderly work environment by properly identifying and storing ingredients, supplies and products as directed by supervisors and efficiently using various hand tools and equipment.
Read and follow the daily production schedule and instructions, prepare packaging materials by retrieving items form storage, applying labels to containers, setting up and loading filling machines, stacking and palletizing products operating various automatic and manual packaging machines, scales and printing devices, industrial lift trucks, pallet jacks and other material handling equipment.
Prepare ingredients according to production schedule and instructions for blending and compounding using various tools and measuring devices, included but not limited to: digital/manual scales, pumps, and hand scoops, buckets, bags, supersacks and pallets. Operate various processing equipment designed to break up, grind, mix, transport, or otherwise prepare ingredients for final processing
Assist other operators as directed.
Bipro Operator Bipro Operator Th-Sat Every Other Sunday Night 5 Am To 5Pm
Agropur is currently looking for a BiPRO Operator at our Jerome, ID location.
Essential Functions Include the Following:
Operate equipment and control processes in the production of high quality/ high value whey products, while applying learned knowledge of processes involved and production methods.
Complete CIP of the equipment used in the production of high quality/ high value whey products.
Complete all documentation in an accurate and timely manner.
Follow all GMP, SOP and HACCP programs.
Follow all safety programs and procedures directly involved with the whey department.
Monitor processes, materials, or surroundings and reviewing information by telephone, in written form or in person.
Identifying information by categorizing, estimating, recognizing changes or deviations in circumstances and or/events.
Perform operator level maintenance as needed when needed.
Assisting other coworkers with tasks and duties that are within the department as assigned.
Train other/new employees.
Ability to pay strong attention to detail and multitask effectively.
Ability to read and understand SOP's.
Understand and troubleshoot product flow's
Able to properly document information legibly.
Understand and obey all Good Manufacturing Practice.
Previous food production is preferred.
Ability to work in a fast paced environment.
Requires the ability to communicate and document work.
Strong organizational skills.
Good to excellent spelling, grammar and written communication skills.
Track and maintain information on a database.
Intermittently be able to lift 60 pounds.
Be able to move up and down stairs.
Able and willing to work safely with chemicals.
Ability to wear hearing protection.
Able to move above about work stations in a manufacturing environment for a 12 hour shift.
Be able to work at floor level, waist level, and shoulder level repetitively.
Be able to work the shift assigned and fill in other shifts as needed.
Be able to work weekends (including Saturday and Sunday) and off shifts if needed or assigned.
AA/EEO Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity
Machine Operator III - Fin Machine Operator 2Nd Shift
Ensuring Chart's Success…
Chart's manufacturing group is critical to building our products on time and of the highest quality to our customers. The Machine Operator III will work towards our production goals along with peers through the direction of lead man, shift supervisor, and plant manager.
What Your Day-to-Day Activities Will Be…
Candidates will have be running McElroy and Happy fin tube machines
Reads, interprets drawings and written instruction applicable to specific machining process.
Performs set-up and operation as required without supervision.
Performs all required measurements.
Capable of required tool selection for required task.
Trains, or assists in training new employees.
Can safely operate overhead or jib type cranes and rigging.
Performs all non-electrical preventative maintenance as indicated by supervision for specific machinery.
Adhere to all safety guidelines and policies.
Other duties as assigned.
Your Professional Experience Should Be…
- The ability to reading a tape measure as well as blue prints.
Your Education Should Be…
- High School Diploma or Equivalent Work Experience
Your Physical Work Environment Will Require…
While performing the duties of this job, the employee is regularly required to:
Standing for prolonged periods of time.
Occasional repetitive lifting up to 60 lbs as regular daily activities necessitate.
Handle or feel objects.
Tools or controls and talk or hear.
The employee is occasionally required to walk, stoop, kneel, crouch or crawl.
Chart Industries is an equal opportunity employer.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!