Cutter Machine Tender Job Description Sample
Machine Tender I-Part Time-Saturday-Sunday
Part time-(Saturday through Sunday)---2nd shift and 3rd shift positions, hours 3pm-11pm and 11pm-7am
Hourly Rate 2nd shift: $14.67
Hourly Rate 3rd shift: $14.92
Executes predetermine methods to package product by the press or store as work in process. Performs visual inspections to detect obvious defects. Keep box counts in order to document the quantity of product being produced.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Package products at the press by following predetermine methods to minimize error.
Consistently meets production requirements.
Empty catch totes into gaylord where packaging at the press is not specified.
Perform basic visual inspection of product and report any quality defects to the shift supervisor.
Keep production area clean in order to promote a safe and neat work environment.
Packaging and labeling
Report any and all safety violations to the shift supervisor to ensure the working environment is free from safety hazards.
Engages in the daily operator maintenance program such as basic oiling of machines.
Collects data for Production Boards.
Performs other duties as assigned
Ability to understand and follow all safety procedures including but not limited to PPE, steel toe safety shoes, maintaining safety guards, etc.
Ability to tend to more than one machine at the same time..
Ability to use basic math skills including addition, subtraction, multiplying, dividing, counting and the use of tape measure.
High school diploma or general education degree (GED).
Up to three months of related experience.
OTHER SKILLS AND ABILITIES
Ability to use the required personal protective equipment at all times including steel toe safety shoes.
Requires ability to walk, stand, carry materials, stoop, kneel, bend at waist, and climb ladders or equipment.
Maximum unassisted lift – 50 lbs. Average lift less than 35 lbs.
Exposure to moving mechanical parts, fumes, airborne particles, and chemicals.
The noise level in the work environment is usually moderate to loud and requires hearing protection. Eye protection is also required.
Steel Toe Safety shoes required.
Temperature environment 40 degrees to 110 degrees.
Machine Tender - 3Rd
If Excellence Drives You, This Is Your Destination.Job Description
BEMIS HEALTHCARE PACKAGING is a world leader in the design and manufacturing of medical packaging and pharmaceutical packaging. The packaging is used to protect the sterility, potency, and condition of medical devices and pharmaceutical products used in emergency rooms, doctor" offices and clinics around the world.
Maintains continuous machine operations between shifts by reporting to assigned workstation prepared to assume production from previous shift at shift start.
Maintains continuous machine during shift by loading, running, packaging, and stacking finished product.
Performs and is responsible for in-process and final on-line inspection and testing of manufactured product.
Ensures quality control requirements are understood and met by reviewing all special instructions and requirements.
Documents items by performing required Statistical Process Control; quality checks/tests; lot number requirements; shipping label requirements.
Resolves production problems by; notifying set up personnel for assistance; notifying supervisor to obtain additional resources; if necessary, discontinue manufacturing operations until the problem is resolved.
Maintains a safe and clean work environment of complying with procedures, rules and regulations.
Documents production information into appropriate reporting system.
Promotes teamwork and effective working relationships among all contacts by setting positive examples.
Contributes to team effort by accomplishing related tasks as needed.
Responsible for working safely and maintaining a safe work environment; attends required training, identifies and reports hazards; wears required PPE for position; and is accountable for self as well as co-worker safety.
Participates in and supports World Class Operations Management (WCOM) teams.
Experience and Education:
High School diploma or equivalent
Experience in a manufacturing environment preferred
Skills and Abilities:
Able to work independently with minimal supervision
Able to count, document, and process required paperwork
Basic math skills
Able to read and interpret work instructions
Able to continuously stand, grasp and forward reaching during entire shift
Able to lift, carry, push or pull 50 lbs. occasionally during the shift
Why choose Bemis?
Benefits Package! Excellent benefits including immediate eligibility for medical, dental & life insurance. Other benefits include gainshare plan, 401(K), paid vacation, holidays and sick days, perfect attendance program, stock purchase plan, along with other programs.
Safety! We pride ourselves in being one of the safest manufacturers in the country. We want our employees to go home in the same condition they arrived.
Training and Development! We invest in you! We help you develop your skills to make you a greater asset. After all, our human capital is our most important resource.
Values! We believe in doing the right thing because it is right. We are founded on our core values
- Ethics, Innovation, Accountability, and Respect. Everything we do starts here.
- Wage range for this position starts at $15.39/hr with an additional .35/hr shift differential. Potential increases every 6 months up to a maximum of $17.49/hr with an additional .35/hr shift differential.Third Shift Hours: Monday
Friday from 12:00 am
Bemis is committed to its core values: Ethics, Accountability, Innovation, and Respect. By becoming an employee at Bemis Company, Inc., you will work in a high performing environment where team members collaborate to get the job done, challenge the status quo to find a better way, and embrace unconventional ways of thinking. We are eager to see how you can make an impact in our high performance culture.
Bemis Company, Inc. is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.
Paper Machine Tender
Clearwater Paper Corporation in Shelby NC has exciting career opportunities for experienced machine operators to support paper machine operations. Successful candidates will have a minimum of one (1) year of industrial manufacturing experience with machine operation, High School diploma or GED, and knowledge of mechanical processes. This position will work 12 hour shifts, rotating with 2 days on, 2 nights on and 4 days off. The work week rolls forward each week. This position includes the need to work OT when necessary.
A combination of experience in the following areas is also desirable: Demonstrating personal safety awareness and promoting a safe work environment, Willingness to work rotating shifts and overtime, Ability to communicate effectively in a team or self-driven environment, Good mechanical and troubleshooting skills, solid computer skills, operate high speed equipment after an initial training period. Paper machine, converting, or other process related experience is also preferred.
Clearwater Paper offers competative pay, opportunities for advancement, an excellent benefit package that includes medical, dental, vision and life insurance, 401(k) plan with employer match, a wellness program, tuition reimbursement and others.
Key responsibilities are not limited, but include:
Maintain safe and clean working environment by complying with procedures, rules, and regulations
Familiar with Lockout/Tagout policies as well as Confine Space policies
Assist with control room operating duties, such as blade changes and machine sheet breaks
Examine completed work to detect defects and verify conformance to work orders, and adjust machinery or notify appropriate individuals as necessary to correct production problems
Assist in Continuous Improvement projects, such as 5S events and Kaizens
Assist during maintenance outages and felt and wire changes
Move finished rolls, chemicals or other materials to and from storage or production areas and loading docks with material handling equipment
Learn DCS for Machine Operations
Learn Wet end and Dry end components of a Paper Machine
Support operations of a small gas fired Boiler – boiler startup and boiler water testing
Adjust Paper Machine Process To Maintain Quality Centerlines Of Paper
Assist Quality Department during trials
Enter Work Orders Into JDE Work Order System To Identify Equipment In Need Of Repairs
Work With Maintenance and E&I Department in Completing Work Orders
Able To Prioritize Several Situations At Once
Other duties as assigned
Required qualifications and competencies:
High school education or GED required
At least 1 year of industrial manufacturing experience with machine operation
Problem solving ability
Solid communication skills including reading, writing and verbal skills
Additional experience preferred:
Achievement of technical skills in all positions on the paper machine
Prior DCS (Distributive Control System) experience
Tissue paper experience
This position requires working in all areas of the paper machine. Lifting, bending
will be required. The area is hot and loud. There are slipping, tripping andfalling hazards, as well as in running nips and suspended loads. Compressedair, steam, lubrication oil and hydraulic fluid will be used in the papermachine area. Travel for this position is minimal, but may be occasionallyrequired. Overtime is required to complete critical tasks and meet deadlines.
Machine Operator Ii-Tube Cutter 3Rd Shift
Johnson Controls is a global diversified technology and multi industrial leader serving a wide range of customers in more than 150 countries. Our 117,000 employees create intelligent buildings, efficient energy solutions, integrated infrastructure and next generation transportation systems that work seamlessly together to deliver on the promise of smart cities and communities. Our commitment to sustainability dates back to our roots in 1885, with the invention of the first electric room thermostat. We are committed to helping our customers win and creating greater value for all of our stakeholders through strategic focus on our buildings and energy growth platforms. For additional information, please visit www.johnsoncontrols.com or follow us @johnsoncontrols on Twitter.
ENVIRONMENTAL, HEALTH, AND SAFETY OBLIGATIONS
Comply with the following Environmental, Health and Safety duties as a condition of employment:
Comply with safety rules
Attend and Participate in Safety Training
Participate actively in the safety process
Ask questions if something isn't known
Report all accidents and injuries immediately
Submit suggestions to improve safety
Know responsibilities in the event of an emergency (i.e. what to do in the event of an alarm for fire, chemical spills, tornados, etc.)
Be a coach to others who are acting unsafely
Must have Lock-out tags after 6 months?
Attend and participate in all hazardous and non-hazardous waste trainings.
Ability to recognize chemical hazardous labels.
Spill management and clean-up.
Air shutoff locations.
Capability to follow satellite accumulation rules and requirements.
Proficiency to recognize hazardous wastes in your area and manage properly.
Must be 18 years of age and have a HS Diploma or equivalent. Must be able to follow written and verbal instructions. Knowledge of simple mechanics and basic math is required. Mechanical aptitude required. Primarily works with light to average weights, with some heavy lifting. Operator is on their feet for the entire shift. Must be able to tolerate working in and with various oils.
1.From prints and set up sheets, sets up and operates tube cutoff machine, band saw, production equipment. Selects proper tools, speed and feeds for various operations as needed.
2.Machines parts from materials such as extruded brass and extruded aluminum.
3.Visually checks machined parts with instruments such as dial depth, comptors, micrometers, and other instruments against drawings.
4.Must hold tolerances from 1/16" to .005.
5.Checks parts for foreign materials.
6.Detects work or broken tooling and replaces as needed.
7.Adjusts or changes machine tooling such as stops, die heads, cutting tools, as well as gears to insure parts are produced within specifications.
8.Lubricates, checks, adjusts, and makes minor repairs on machines.
9.Performs preventative maintenance.
10. Occasionally operates lift truck to move materials to and from work area.
11. Records production, scrap counts on a daily basis.
12. Records all critical dimensions on SPC charts.
13. Performs housekeeping and other related duties such as cleaning machines as assigned by the supervisor.
Machine Operator - Plasma Cutter
The Plasma B&O Operators setup, adjust and operate equipment including loading raw materials into feeder mechanisms, adjusting speeds, and clearing jams or other malfunctions. Plasma B&O Operator must be able to interpret blueprints and perform precise measurements with tape measures, calipers and micrometers. This position will operate a variety of different machinery or equipment including the Plasma Cutter, Blaster and Abrasive Saw depending on production demand. Attention to detail, problem solving, adaptability and a strong work ethic are essential in our fast paced environment.
High school diploma or equivalent required.
Three years prior experience operating industrial machinery preferred. Strong mechanical knowledge and ability to interpret job orders and blueprints required.
Prior experience setting up and operating a Plasma Cutter and/or Abrasive Saw preferred.
Prior experience operating forklifts, jib cranes and overhead cranes preferred.
Basic mathematical skills and ability to perform precise measurements using a tape measure, caliper and micrometer.
Basic computer skills required to accurately gather and input data from computer systems and record job transactions.
Capability to lift 50 lbs with regularity and up to 70 lbs occasionally.
Operates all equipment in a safe manner and uses safe work habits. Maintain a safe and clean working environment including complying with safety procedures, rules, and regulations.
Follows specifications or procedures for set-up, programming and machine operation using blueprints, instructions and machine knowledge.
Mounts, installs, aligns and secures tools, attachments and fixtures using hand tools and precision measuring instruments.
Selects, measures, assembles and sets machine tooling including replacement of tooling when necessary.
Either works closely with Value Stream Coordinators, Material Handlers or obtains jobs and materials utilizing the Dispatch List and a forklift.
Loads proper materials into machinery utilizing cranes when necessary.
Identify materials and manage the cut plan to utilize drop offs.
Watches gauges, dials or other indicators to make sure machinery is working properly. Notifies a supervisor promptly in the event a machine is not properly working.
Provide basic machine maintenance and troubleshooting.
Follow proper settings and procedures to ensure machine longevity.
Conducts tests and first run inspections of products to evaluate quality and tolerance.
Detects and reports defective materials or questionable conditions to supervisor.
Accurately clock job transactions into ERP software.
Willingness to cross train and perform the work of other job tasks when necessary.
Since 1969 Construction Forms, Inc. has built a reputation on engineering and fabricating elite solutions for the concrete pumping industry. Our concrete delivery and placing systems are used around the world, every day, helping to create the infrastructure of today and the future. If you want a part in innovating and creating the solutions for tomorrow, Construction Forms has an opportunity for you.
Construction Forms offers a competitive industry wage based upon experience level, and we understand it is more than just money. The organization offers a full benefits package including health, dental and vision insurance with low premiums and robust benefits to keep you well. Construction Forms provides short term disability, long term disability and life insurance at no cost to you to protect you and your family. Employees can participate in the company 401(k) plan with a company match available to save for the future. Time off includes generous vacation and ten paid holidays per year to relax and celebrate. The company even offers local perks and discounts for things like partnered fitness club dues.
If youre ready to make a difference in a growing, fast paced organization, apply for the Machine Operator - Plasma Cutter position today!
Block Tender - Odessa, FL
- Odessa, FL
Location: Odessa, FL, US, 33556
Company: Preferred Materials
Job ID: 132049
Preferred Materials – Concrete Division, part of Oldcastle Materials Southeast Division, is a leading supplier of ready mix concrete, concrete block, rebar and building materials in the state of Florida, providing the highest product quality and service in the construction industry. With headquarters in Bonita Springs, Florida, and operations in five key Florida markets, Preferred Materials provides municipalities, developers, architects, engineers, contractors, builders and suppliers a wide variety of construction materials and products. Our employees make Preferred Materials a great place to work. We promote a strong safety culture, where employees take responsibility for their own safety.
Are you a Block Plant Tender looking for a change?
As a Block Plant Tender you will perform a wide range of duties within the plant including, but not limited to: Operating a Fork Lift, lifting as much as 40 pounds alone, being on feet all day, following all required safety procedures and general clean-up around the plant.
Monitors the operation of concrete block manufacturing machine. Tasks include, removing and installing brick molds, cleaning all parts of the machinery. Shoveling, sweeping and raking up debris from base of machinery. Will also make adjustments to calibration of machine and make general repairs as needed to keep machine operating. Pushes blocks along rollers and arranges them to be placed onto pallets. May climb into machinery to repair parts. Climbs into and works in enclosed space when cleaning out mixer.
Minimum 1 years previous experience
Ability to work independently as well as part of a team
Shift differential may apply
What Oldcastle Offers You
Highly competitive base pay
Comprehensive medical, dental and disability benefits programs
Group retirement savings program
Health and wellness programs
A culture that values opportunity for growth, development, and internal promotion
Oldcastle has a long and proud heritage as one of North America's largest corporations. We are a proud reflection of the hundreds of family businesses, local and regional companies and mid to large sized enterprises that together form the Oldcastle family. Oldcastle operates with a decentralized, diversified structure, letting you work in a small company environment while having the career opportunities of a large enterprise.
Oldcastle's Southeast Division Companies include; Preferred Materials – Asphalt & Concrete, Conrad Yelvington Distributors, and Midsouth Paving & Aggregates.
Oldcastle is a great place to grow! If you're up for a rewarding challenge, we invite you to take the first step and apply today! Please complete your online application and profile which will be sent directly to the appropriate Hiring Manager. Thank you for your interest in the Oldcastle family!
Follow Oldcastle Careers on Facebook, Twitter, Instagram, Google+, Pinterest, WordPress (Career Blog) and LinkedIn!
Oldcastle Materials, Southeast Division is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
Oldcastle Materials, Southeast Divisions is part of the Oldcastlecareers™ network.
Nearest Major Market: Tampa
Job Segment: Forklift, Warehouse, Machinist, Construction, Manufacturing, Engineering
Summary Employees are required to maintain molten metal supply in the melt room and holding furnaces at the die cast machines safely and efficiently to support the production requirements and to assure the proper alloy is provided for the parts being cast. Duties and ResponsibilitiesThis job includes but is not limited to the following: • Keep the holding furnaces on the die cast machines full of proper alloy of metal and at proper temperatures.
This process, called hauling metal, must be done in a safe, efficient, and timely manner as to keep production running at all times while minimizing costly mistakes such as overfilling furnaces, overfilling ladles, spilling metal, letting furnaces run too low on metal, mixing alloys, etc. • Keep transfer (bull) ladles properly cleaned and heated. • Keep scrap hoppers emptied and identified. • Daily chipping, cleaning, fluxing, and skimming of breakdown furnaces.
This also includes Striko Holding Furnaces. • Keep alloys separated. This applies to all metal including that which is stored, in any furnace, or in scrap form. • Cold clean and repair of breakdown furnaces.
This includes jackhammering, cleaning, forming, ramming, casting, painting, etc. • Charge metal to breakdown furnaces in such a way as to keep them full of the proper alloy metal and at the proper temperatures. Metal is charged in form of sows, ingots, castings, and ingredients. • Routine and proper cleaning of all die cast holding furnaces. • On Striko Furnaces clean fill funnels and pouring spouts. Coat as needed. • Keep area around furnace clean. • Perform alloy changes in any furnace properly. • Run spectrometer including cleaning, profile, standardization, and routine analysis. • Properly handle all department paperwork including labor cards, production sheets, check sheets, metal hauling sheets, barcodes, audit logs, furnace cleaning sheets, scrap cards, flux/dross cards, etc. • Properly handle paperwork, sampling, and barcoding of all incoming metal/materials. • Daily inspection paperwork and safe driving of forklifts. • Keep all melt rooms and work areas clean as well as tools/supplies neat and organized and put in proper locations. • Work in a safe manner and report unsafe conditions/hazards immediately. • Wear required personal protective equipment. • Capable and willing to work overtime. • Participate in training programs deemed necessary by the company. • Perform other associated duties, functions, or work as needed or assigned to continue the productive operation of the company. • Must follow all safety rules and policies as set forth by OSHA guidelines and Pace Industries policies and procedures as outlined in the employee manual.
Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities. Position RequirementsMust be able to read and understand written directives.
The predominate forms of instructions are written, visual, and verbal. Forklift certification required. This is a physically demanding position requiring moderately heavy lifting and working in a hot environment.
Pace Industries has a strong commitment to the principle of diversity, and in that spirit seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline.
Business Line Government
Position Title Boiler Tender
United States of America
Responsible for continuous boiler operations and operation of portable boilers on an as-required basis. Must be able to adjust a wide variety of boilers for maximum operational efficiency.
1.Monitor boiler feed water to ensure proper water conditions to prevent mineral deposits and corrosion in the boiler.
2.Perform preventive maintenance actions and perform boiler fueling operations.
3.Employ instrumentation and trouble-shooting skills to detect and resolve boiler operational problems.
4.Perform fuel transfer operations
5.Responsible for modifying steam distribution systems associated with each boiler, which includes high and low pressure steam lines, condensate returns, air lines, water, oil and gas lines/valves, strainers and boiler chemical feed systems.
Perform all other position related duties as assigned or requested.
Work Environment, Physical Demands, and Mental Demands:
Typical warehouse environment with no unusual hazards, frequent lifting to 20-50 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech/hearing abilities for communication, constant mental alertness, must possess planning/organizing skills, and must be able to work under deadlines.
- AECOM enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
- Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations.
Accordingly, each employee must conform to the AECOM Quality Policy and carry out job activities in compliance with applicable AECOM Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
- Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
High school diploma or equivalent plus operates government vehicle such as a pickup to accomplish function. Must possess a valid state driver’s license and be able to obtain a National Institute for the Uniform Licensing of Power Engineers (NIULPE).
Passing a pre-employment drug screen and a government background check is required.
Must be able to successfully pass a National Agency Check (NAC) within 60 days of hire if required.
Must be available for any shift. Willing to work weekends and other hours as needed.
Must be able to speak, read, write and understand English.
Work on this contract is performed at the Red River Army Depot. Access to the Depot requires all covered individuals to be registered with the United States Selective Service.
For more specific information on registering, please visit: http://www.sss.gov/regist%20information.htm Preferred Qualifications
What We Offer
AECOM is a place where you can put your innovative thinking and business skills into high gear and work alongside other highly intelligent and motivated people. It's a place where you can apply your skills to some of the world's most challenging, interesting, and meaningful projects worldwide.
It's a place that values the diversity of our areas of practice and our people. It's what makes AECOM a great place to work and grow.
AECOM is an equal opportunity employer and Minorities, Females, Veterans, and Disabled persons are encouraged to apply. For further information, please click here to view the EEO Is The Law poster.
Job Category Craft/Trade
Country United States of America
Position Status Full-Time
Requisition/Vacancy No. 180492BR
Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.
Traditional Breads is a fast-growing company where everyone plays a very unique and important role in the production of our baked goods.
The Oven Tender is responsible for the scoring and baking of our products. Candidates must be able to coordinate the products according to specifications and company guidelines. Successful candidates will have experience in the production environment operating ovens.
DUTIES AND RESPONSIBILITIES:
Follow BRC, HACCP and GMP guidelines when at work
Records required data and communicates any issues
Ensures Oven area is kept clean according to company guidelines
Follows all personal and food safety rules
Performs other duties as assigned
EXPERIENCE, EDUCATION AND SKILL:
Excellent English verbal and written communication skills and Microsoft Office Suite
Advance math skills
Experience leading a team
Must have proven attention to detail
Must be able to work flexible hours and schedules
Basic food-safety knowledge
2 years of food production experience is desirable
Positive attitude in support of the companys mission
PHYSICAL DEMANDS AND WORK ENVIRONMENT:
Must be able to walk, reach, bend, and climb steps
Must be able to lift up to 50 lbs.
Must be able to stand for extended periods of time
Exposure to hot temperatures
Bakery Production Environment with high noise and dust levels
We offer a competitive salary and benefits package. Visit us at
Boiler Tender (664-183)
The Boiler Operator operates, maintains, and repairs boilers and large tonnage chillers, in accordance with Air Force Instruction (AFI) and Performance Work Statement (PWS) requirements. The operator fires boilers and stops and starts high pressure boilers, large tonnage chillers, and large HP air compressors. (i.e. 25hp and above). The operator observes and interprets readings on gauges, meters, and charts which register various aspects of boiler operation.
The operator adjusts controls to insure safe and efficient boiler operation and to meet demands for steam or high temperature water, in accordance with AFI and PWS. The operator maintains boiler operation log; cleans, oils, and makes minor repairs to boiler room equipment; and following prescribed methods, treats boiler water with chemicals and analyze boiler water for such things as acidity, causticity, and alkalinity.
The incumbent operates, maintains and repairs boilers, large tonnage chillers, in accordance with Air Force Instruction (AFI) and Performance Work Statement (PWS) requirements.
Keeps supervisor apprised of unique situations and problems encountered and identify and reports safety, environmental and other work requirements for resolution.
Stop and start high pressure boilers, large tonnage chillers and large hp air compressors. (i.e. 25hp and above)
Observes and interprets readings on gauges, meters, and charts which register various aspects of boiler operation.
Adjusts controls to insure safe and efficient boiler operation and to meet demands for steam or high temperature water, in accordance with AFI and PWS.
Maintains boiler operation log; clean, oil, make minor repairs to boiler room equipment; and following prescribed methods, treat boiler water with chemicals and analyze boiler water for such things as acidity, causticity, and alkalinity.
Ability to read, understand and interpret technical manuals, shop directives, blueprints, sketches, diagrams, specifications, verbal and written instructions
Responsible for completing daily work order log documenting inspections, maintenance and repair information, to include work performed, materials used and hours worked on each assigned work order.
Interfaces with customers and responsible for customer feedback, as applicable.
Operates motor vehicles in accordance with company vehicle policies.
Complies with applicable federal, state, United States Air Force (USAF) and Occupational Safety & Health Administration (OSHA) environmental laws and regulations.
Follows furnished information directives; Standard Operating Procedures (SOPs), Policies and Procedures, and contract requirements.
Complies with health and safety rules and procedures; performs work in a manner that enhances the safety of the work environment.
Incumbent will at all times wear appropriate Personal Protective Equipment (PPE) as determined by position and duties.
Performs other related duties as assigned.
Job Requirements (Education, Experience, & Professional Association)
Must obtain an Illinois State Class II Boiler License within 60 days of hire date, based on previous experience.
Minimum of three (3) years' experience operating boilers up to 1600 hp.
Ability to use: technical manuals, technical bulletins or manufacturer's specifications.
The ability to accurately read: measuring devices, testing equipment and or instruments.
Must be available to work other shifts as directed, to include week-ends and holidays.
High school diploma or equivalency.
Current state driver's license, acceptable driving record and proof of valid insurance.
Basic computer skills and familiarity with Microsoft Office applications.
Ability to obtain and maintain all necessary licenses/IDs/certifications.
Ability to solve problems and work independently with minimal supervision.
Ability to adapt to changes in technology and applicable facility/infrastructure codes and standards.
Familiarity with facility/infrastructure codes and standards, as applicable.
Ability to deal with a variety of people in a professional & courteous manner in diverse situations.
Proficiency and knowledge of a variety of hand and power tools.
Demonstrated working ability read, write, speak and understand English.
Five (5+) years' experience operating boilers up to 1600 hp.
Previous experience working on a military installation.
Experience working on facilities.
Familiarity with military-specific facility/infrastructure codes and standards, as applicable.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!