Design Inserter Job Description Sample
Inserter Operator 1
ManufacturingInserter Operator 1
Operate machines that insert printed matter, such as letters or booklets into folders or envelopes. Set up and adjust the machine to operate efficiently. Oversee output and make adjustments as necessary.
Requires familiarity with routine operating procedures of equipment which can be set up and operated following a few step-by-step instructions and the skill to operate the equipment. Requires skill to perform minor clerical tasks incidental to the operation of the equipment (e.g., maintain machine operating and maintenance records, write new identification labels for computer tapes, etc.), and skill to perform routine maintenance such as cleaning and lubricating the equipment. Ability to identify if improper machine operation and make basic adjustments.
RRD is an EEO/AA including Vets and Disabled Employer
Ability to read and understand instructions.
Ability to stand most of 8 hour shift.
Ability to lift heavy items up to 50 lbs.
Good communication skills.
Inserter Machine Operator
ManufacturingInserter Machine Operator
St Charles, IL
WALLACE AVE - Operate machines that insert/fold printed material, such as letters or booklets, into folders or envelopes. Set up and adjust the machine to operate effecientlly. Oversee output and make adjustments as necessary.
Requires excellent knowledge of standard set ups, adjustments and operating characteristics of the equipment and skill to perform standard adjustments and operate the equipment. Ability to set up, operate, and perform basic adjustments to the equipment according to the individual job requirements, operating characteristics, and capabilities of the equipment. Typically, the adjustments performed at this level are routine and the need for such adjustments are readily apparent.
Position is available on B-SHIFT: Thursday, Friday & Saturdays 6AM-6PM
RRD is an EEO/AA including Vets and Disabled Employer . The company's policy is to select, place and deal with all its employees without discrimination based on race, religion, color, national origin, sex, gender identity or expression, age, disability, perceived disability, sexual orientation, protected Veteran status, genetic information or on the basis of any other status protected by applicable federal, state or local law.
Must have good eye-hand coordination
Strong mechanical aptitude required
Ability to communicate in English -read, write, understand
Lifting up to 50 lbs, 4-6 hours
Walking/standing, 6-7 hours
Bending/stooping, 2-3 hours
High school diploma, GED, or equivalent experience in a manufacturing environment
Pitney Bowes Series 8 and/or Kern experience preferred, but not required
Inserter Assistant - Production
ManufacturingInserter Assistant - Production
The Inserter Assistant assists the Inserter Operator by participating in make-ready processes and by sorting mail pieces to prepare them for mailing. The Inserter Assistant should learn to operate the inserter equipment. They could operate the equipment during the peak production period.
1.Performs quality checks and monitors control numbers during the take-out process by inspecting the pieces, mailing addresses, and z records to verify that all numbers are accounted for and to ensure high quality of the mail pieces.
2.Sorts mail pieces at the inserters according to postal specifications to ensure that all mail meets USPS regulations prior to being mailed.
3.Assists the Inserter Operator by verifying the components, tracking damaged mail pieces, completing applicable paper work, and by unpacking materials to provide support to the Operator and to learn the job functions of the Inserter Operator position. Assists in hand inserting projects as needed.
4.Prepares for jobs by stocking the work area with needed materials, specifications, and tray/bag tags from the designated areas to ensure the work station is equipped for the correct mail sort.
5.Assists the Inserter Operator to prepare the inserter for run time.
6.Cleans work area to maintain safe and organized environment.
7.May include other duties as assigned.
RR Donnelley is an EEO/AA including Vets and Disabled Employer.
1.Good communication skills both oral and written.
2.Basic math skills.
3.Good problem solving abilities.
Machine Inserter Operator
Production opportunities at Quad instill a sense of empowerment and possibility distinct from those at other employers. Quad's state-of-the-art manufacturing facilities include world-class automation and binding technology. Our platform gives our clients a full range of options to produce personalized marketing products. Fueled by innovative, interesting days, you'll find hard work is good work, and feel a deep sense of pride in a job well done – something shared by everyone in the community we call Quad.
Quad has an opening in the Shakopee, MN facility for an Inserting Operator. The Inserting Operator is responsible for operating specific bindery equipment to process or finish printed products efficiently and accurately in the warehouse. Quad relies on the Inserting Operator to help ensure that all finished products meet or exceed our customers' expectations and to help reducing the cost of errors through consistent work quality.
In addition, the Inserting Operator role is a leadership position responsible for the day-to-day production of their assigned shift. Through effective communication and coordination of job-related information with other shifts, production staff and the supervisor/manager, the Inserting Operator impacts department performance by effectively aligning the efforts of his/her crew members with production goals and customer delivery needs. The Inserting Operator also plays an important part in the training and development of crew members.
Day Shift (7am - 7pm) Monday, Tuesday, Wednesday and Thursday
Setup and operate various bindery equipment which may include inserting, folding, scoring, stitching, and gluing equipment safely and properly
Follows job specifications to ensure accuracy and maintain quality level during production. Ensures and is accountable for accuracy of product counts, quality, and customer specifications.
Performs routine maintenance on equipment and reports equipment, and supply needs to Finishing Supervisor
Communicates and coordinates all job-related information to the appropriate parties. Accurately log job information into the shop data collection system.
May assign duties to bindery crew members with training and instructions as required. Perform other duties as assigned
Ability to measure and read a ruler
Perform basic mathematical calculations
Must be willing to work overtime during peak production periods
Must have high school diploma or equivalent
Must be able to communicate verbally and in writing. Bilingual English/Spanish preferred.
Additional Company Information
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad/Graphics is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military or veteran status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories.
Drug Free Workplace
Mail Inserter Operator - ALL Shifts - Dallas, TX
About WestRockWestRock (NYSE: WRK) partners with our customers to provide differentiated paper and packaging solutions that help them win in the marketplace. WestRock’s 50,000 team members support customers around the world from more than 320 operating and business locations spanning North America, South America, Europe, Asia and Australia. Learn more at www.westrock.com.
Mail Inserter Operator - ALL SHIFTS - Dallas, TX1455 Terre Colony CourtDallas, Texas, 75212United States Multi Packaging Solutions a WestRock Company – Card Printing and Packaging Jobs: The Transaction Card Printing Industry is healthy and growing! Find your Career in Printing with MPS!No Experience Necessary but it is preferred -- We offer specialized training for you.Career Opportunity: MPS is currently seeking Mail Inserter Operators (ALL SHIFTS) for Card Printing, Mail Shop, and Packaging Departments. Starting Pay $14.00 + Shift Differential, and Up to $29/hr. Full Health Benefits after 30 days of employment with a robust 401k plan. How you will impact WestRock:Reads work orders to determine setup specifications and instructions
Starts machines and makes trial runs to verify accuracy of machine setups
Loads, observes and monitors machine operations
Detects malfunctions and make adjustments on equipment
Maintains records of daily production, using specified forms
Ensures quality and sequential integrity of job being packaged on machines
Adheres to Standard Operating Procedures and work instructions
Preforms scheduled maintenance and minor repairs to machine
Makes adjustments to machine for various job types
Collects production off delivery belt, inspect for defects and place in sleeves in sequential order What you need to succeed: High school diploma or G.E.D is preferred Two to three years of related machine operating experience preferred Able to learn quickly and adapt to change Able to work well in a team environment Attentive, teachable and dependable Strong mathematical skills Able to read and write complex instructions, correspondence and memos Efficient in basic computer skills Able to stay organized and prioritize actions Able to work in a fast paced environment What we offer:
Corporate culture based on integrity, respect, accountability and excellence Comprehensive training with numerous learning and development opportunities An attractive salary reflecting skills, competencies and potential A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. #TXWestRock Company is an Equal Opportunity Employer committed to creating and maintaining a diverse workforce: Minorities/Females/ Disabled/Veterans.
Mid-Valley Newspapers, publishers of the Albany Democrat-herald and Corvallis Gazette-times, has an opening for a part-time inserter/material handler. The successful candidate will be able to feed printed material into a inserting machine, jog and palletize products onto pallets, operate manual pallet jacks while helping to maintain a clean and safe production area. We work hard to maintain a team oriented professional environment.
Average hours will be about 20 - 25 hours a week.
We are an equal opportunity employer and a drug-free workplace. All applicants considered for employment must pass a post-offer drug screen and background check prior to commencing employment. Please apply online at : http://www.democratherald.com/workhere
High school diploma or equivalent degree
Bending, twisting and stooping throughout shift
Lifting up to 25 pounds regularly
Standing for up to 5 hours continuously
Being able to work safely around moving machinery and equipment
Working in a team environment
Inline Inserter CMC 9000
Summary: Responsible for handling all functions of inserting equipment with inline cutting, folding, ink jetting, cameras & sorting tasks including set up, machine operation, trouble shooting and mechanical aspects to provide a product which meets customerquality and time requirements while meeting company profitability requirements.Requirements
Education and/or Experience
1.Two years Direct Mail machine operator experience or equivalent machine operator experience (preferred).
2.Experience with equipment that inserts using vacuum/friction/shuttle feeders, ink jetting, and camera systems (preferred).
Essential Duties and Responsibilities include the following.
Set up, operate, and maintain the inserter and all associated in-line equipment.
Follow all established processes associated with the operation of the inserter and in-line equipment while meeting quality expectations..
Read and follow runlist instructions and follow sign-off / continuity procedures.
Perform all Helper duties, including setting up stations and packaging requirements.
Run and sort all normal jobs as a one person operation.
Inform Shift Leader and show ability to order supplies or parts when needed.
Communicate with next shift about status of job(s) and any special instruction through the use of the hour by hour books that should be filled out thoroughly and TPM checklists to show equipment condition.
Demonstrate leadership and ability to train and coach in working with others.
Run the machine through cross-over whenever you come into a machine that has been running.
Work and assist in other areas as needed.
Complete mail sorting training/certification and have the ability to train others to sort following USPS standards.
Complete all required paperwork and use timekeeping, system efficiently.
Work with the team to improve the workflow and maintenance on this equipment.
Be cooperative, positive and respectful with management, coworkers and team.
Aggressively seek out opportunities for company and self-improvement and cross train on other equipment whenever time permits..
Participate and support continuous improvement activities.
Attend and participate in the Monthly Cost Center meetings.
Follow the Help Chain protocol to minimize downtime on the machine you are running.
Ensure all safety policies are followed and hold a high regard for the safety of others.
Responsible for informing leader of any concerns that arise.
Participate in 6S/Lean manufacturing initiative (Set machine "Baseline" expectations and hold self and others to that level).
Hold TPM at the highest level, logging all maintenance that is done on the equipment with dates, times and issues.
Complete other tasks requested by Leader.
Apply On-lineSend This Job to a Friend
An Equal Opportunity Employer
Copyright © Ultimate Software
RF Design Co-Op
If you are looking for a challenging and exciting career in the world of technology, then look no further. Skyworks is an innovator of high performance analog semiconductors whose solutions are powering the wireless networking revolution. At Skyworks, you will find a fast-paced environment with a strong focus on global collaboration, minimal layers of management and the freedom to make meaningful contributions in a setting that encourages creativity and out-of-the-box thinking. Our work culture values diversity, social responsibility, open communication, mutual trust and respect. We are excited about the opportunity to work with you and glad you want to be part of a team of talented individuals who together can change the way the world communicates.
Requisition ID: 50062
The RF Design Engineering Co-Op will be involved in the development of cutting edge products for wireless mobile systems.
1.Design, simulation and testing of MCM front-end modules, duplexer matching for best insertion loss and isolation, matching network and HBT PA design and improvement for optimized PA performance.
2.Simulating/validating performance in a multi-chip module environment.
3.Block-level design and simulation to optimize performance and establish correlation between measurement and simulation.
4.Analysis of measurement data and carry out further experiments based on it.
5.Tuning RF front end modules in the lab.
6.Deep diving into current technical challenge either in simulation or lab debugging, and take the root cause analysis with multiple improvement paths.
Currently enrolled in a PhD (strongly preferred) or MS program studying Electrical Engineering
Must return to school after completing this Co-Op (note: we will not consider students who have already graduated, please do not apply if you already graduated)
Firm grasp of RF/Microwave concepts as well as sound PA fundamentals (have taken at least one RF/Microwave course)
Deep understanding S parameter, passive network matching and lumped network design as well as insights into distributed networks.
Knowledge of EM simulation methodology, ADS, HFSS experience
Working knowledge of Network Analyzer and/or Spectrum Analyzer is a plus
Microsoft office skills including Word, Powerpoint and Excel
Candidate should be a self-starter with strong communication skils
Skyworks is proud to be an equal opportunity employer supporting diversity in the workplace.
Nearest Major Market: San Jose
Nearest Secondary Market: Palo Alto
Job Segment: Engineer, Network, Electrical, Telecom, Telecommunications, Engineering, Technology
Design Engineer/Associate Design Engineer (20190852)
Be part of the Toro team that professionals and contractors around the world count on for durability, productivity and performance. Toro's construction and rental businesses are driven by products that install underground utilities, excavate and move materials in confined spaces for landscaping and hardscaping, mix and finish concrete for building structures, compact the earth for various construction projects, and help arborists and turf professionals maintain lush landscapes. These products are sold to end users through a nationwide dealer network and direct to rental stores. Contractors and rental stores rely on Toro to deliver productive, easy-to-operate machines that hold up to demands of heavy use, season after season.
Supports new product development and creates innovative solutions to current product challenges.
Executes to a project plan and works with support teams to meet customer requirements.
DUTIES & RESPONSIBILITIES:
Supports development of new product or improvements to existing products.
Responsible for CAD model, drawing package, bill of material, and product specification. Responsible for the building of prototypes.
Performs engineering analysis to predict the behavior of the proposed designs using appropriate analysis tools, hardware or software.
Provides input to product design plans including budgets and schedules. Executes to plan and assists in control of project.
Consults with other product design engineers, marketing, research engineers or mechanical designers on proposed product designs. May be responsible for work direction of designers and drafters.
Works with vendors to finalize design and create specifications specific for that product application
Performs functions as required by established engineering procedures including project requests through engineering release and change management procedures.
Assures that designs meet the requirements of the customer as defined by safety and any applicable industry or Toro standards.
Actively participates in the development and understanding of customer requirements through direct contact with marketing, customers, service, manufacturing and distribution.
Coordinates work with the product development team members including: Product Development Lab, Test Lab, Drafting, CAE, Quality, Marketing, Purchasing, Plants, Advanced Manufacturing, Sales, Technical Publications, Administration, and Management. Conducts and participates in regular project team meetings.
Works with test engineers and technicians to develop a test plan, which simulates the requirements of the customer. Evaluates test data and develops design revisions to solve problems.
Keeps abreast of new technological developments, components, concepts, materials, manufacturing processes, or competitive environment, which would affect the design or design process.
Other duties as assigned by supervisor.
Supports company quality policies within their respective area. Participates in quality initiatives and training as needed.
Travel to test sites, distributors, customers, vendors, manufacturing facilities, and others will be required.
Ability to work with others in teams to accomplish goals. Includes task and/or project leadership.
Bachelors in Mechanical, Aeronautical or Agricultural Engineering required.
Proficient CREO experience in development of parts and managing assemblies.
Experience in the powered equipment industry desired 1+ years preferred.
Must have a strong mechanical aptitude and be able to create and analyze portions of product design as assigned when given direction and leadership.
We are proud to be an Equal Opportunity Employer including protected veterans and individuals with disabilities.
Senior Structural Design Engineer - Space Vehicles Design (Svd)
Boeing Space and Launch, In-Space Vehicles is searching for a Senior (level 5) Space Vehicle Design Architect to provide strategic oversight and direction to develop the spacecraft physical design to meet challenging customer requirements. This position is located at El Segundo, California.
Develops mechanical design of the space vehicle including integration of the bus, payload and antenna subsystems.
Leads and participates in system level trades to ensure the vehicle design meets all physical, mechanical and environmental requirements while accommodating the required payload, power, propulsion, thermal, communications and attitude control system requirements.
Ensures that the space vehicle design meets internal and external production and manufacturing requirements using DFMAT principles.
Leads the development of qualification and acceptance level test plans to verify system designs meet requirements and specifications.
Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of a high non-recurring development effort.
Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
Architecture of new space vehicle designs and/or improvement to current spacecraft product line platforms.
Defines mechanical design trade space and closure criteria.
Defines mechanical, structural, environmental design and integration requirements for the S/C and its constituent assemblies and components including both flight and non-flight (GSE) hardware.
Develops manufacturing and test plans to support spacecraft integration, transportation and launch.
Supports and approves manufacturing and integration plan, Digital Mock-Up (DMU) and Virtual Manufacturing (VM) simulation reviews.
Interface Control Dwg/Models including but not limited to Moving Mechanical Assemblies (MMAs).
Defines and executes on CCCP (Critical Clearance Control Plan) including definition and verification of CCCL (Critical Clearance Control List activities).
Supports and approves design reviews, test plans and procedures, critical planning procedures.
Resolves conflicts/interface issues between product organizations.
Resolves anomalies including determination of root cause, containment actions and corrective actions.
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Space and Launch
Relocation Assistance Available
Yes. Available for eligible candidates, if authorized.
This position requires the ability to obtain a U.S. Security Clearance, for which the U.S. Government requires U.S. Citizenship.
Typical Education/Experience: Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Basic Qualifications (Required Skills and Experience):
Experience with overall spacecraft configuration and physical design.
Experience with structure materials and processes including metals, composites, bonded and bolted joints.
Experience with mechanisms and mechanical systems including release devices and deployments.
Experience with launch vehicle performance and interfaces.
Experience with space environments and survivability techniques including contamination, radiation, EMI/EMC, ESD.
Experience with space hardware qualification and test requirements.
Experience working with suppliers and supplier management personnel.
- Experience with hardware manufacturing and spacecraft AI&T.
Preferred Qualifications (Desired Skills/Experience):
Experience with payload system engineering & payload configuration design.
Experience with antenna design, analysis and manufacturing.
Experience with power systems and hardware including solar arrays, batteries, and power electronics.
Experience with liquid propulsion systems and hardware including tanks, thrusters and feed system components.
Experience with electric propulsion system design and hardware requirements.
Experience with astrodynamics of space mission design & analysis.
Experience with placement, alignment and usage requirements for attitude control system sensors & actuators.
Experience with both digital and RF telemetry and command systems and hardware.
Experience with structural dynamics, loads and stress analysis.
Experience with thermal system design and thermal hardware including heat pipes, blankets and active thermal control systems.
Experience with RF transmission line and wire harness requirements and design.
Yes, 10 % of the Time
Contingent Upon Program Award
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!