Devulcanizer Tender Job Description Sample
Boiler Tender (664-183)
The Boiler Operator operates, maintains, and repairs boilers and large tonnage chillers, in accordance with Air Force Instruction (AFI) and Performance Work Statement (PWS) requirements. The operator fires boilers and stops and starts high pressure boilers, large tonnage chillers, and large HP air compressors. (i.e. 25hp and above). The operator observes and interprets readings on gauges, meters, and charts which register various aspects of boiler operation.
The operator adjusts controls to insure safe and efficient boiler operation and to meet demands for steam or high temperature water, in accordance with AFI and PWS. The operator maintains boiler operation log; cleans, oils, and makes minor repairs to boiler room equipment; and following prescribed methods, treats boiler water with chemicals and analyze boiler water for such things as acidity, causticity, and alkalinity.
The incumbent operates, maintains and repairs boilers, large tonnage chillers, in accordance with Air Force Instruction (AFI) and Performance Work Statement (PWS) requirements.
Keeps supervisor apprised of unique situations and problems encountered and identify and reports safety, environmental and other work requirements for resolution.
Stop and start high pressure boilers, large tonnage chillers and large hp air compressors. (i.e. 25hp and above)
Observes and interprets readings on gauges, meters, and charts which register various aspects of boiler operation.
Adjusts controls to insure safe and efficient boiler operation and to meet demands for steam or high temperature water, in accordance with AFI and PWS.
Maintains boiler operation log; clean, oil, make minor repairs to boiler room equipment; and following prescribed methods, treat boiler water with chemicals and analyze boiler water for such things as acidity, causticity, and alkalinity.
Ability to read, understand and interpret technical manuals, shop directives, blueprints, sketches, diagrams, specifications, verbal and written instructions
Responsible for completing daily work order log documenting inspections, maintenance and repair information, to include work performed, materials used and hours worked on each assigned work order.
Interfaces with customers and responsible for customer feedback, as applicable.
Operates motor vehicles in accordance with company vehicle policies.
Complies with applicable federal, state, United States Air Force (USAF) and Occupational Safety & Health Administration (OSHA) environmental laws and regulations.
Follows furnished information directives; Standard Operating Procedures (SOPs), Policies and Procedures, and contract requirements.
Complies with health and safety rules and procedures; performs work in a manner that enhances the safety of the work environment.
Incumbent will at all times wear appropriate Personal Protective Equipment (PPE) as determined by position and duties.
Performs other related duties as assigned.
Job Requirements (Education, Experience, & Professional Association)
Must obtain an Illinois State Class II Boiler License within 60 days of hire date, based on previous experience.
Minimum of three (3) years' experience operating boilers up to 1600 hp.
Ability to use: technical manuals, technical bulletins or manufacturer's specifications.
The ability to accurately read: measuring devices, testing equipment and or instruments.
Must be available to work other shifts as directed, to include week-ends and holidays.
High school diploma or equivalency.
Current state driver's license, acceptable driving record and proof of valid insurance.
Basic computer skills and familiarity with Microsoft Office applications.
Ability to obtain and maintain all necessary licenses/IDs/certifications.
Ability to solve problems and work independently with minimal supervision.
Ability to adapt to changes in technology and applicable facility/infrastructure codes and standards.
Familiarity with facility/infrastructure codes and standards, as applicable.
Ability to deal with a variety of people in a professional & courteous manner in diverse situations.
Proficiency and knowledge of a variety of hand and power tools.
Demonstrated working ability read, write, speak and understand English.
Five (5+) years' experience operating boilers up to 1600 hp.
Previous experience working on a military installation.
Experience working on facilities.
Familiarity with military-specific facility/infrastructure codes and standards, as applicable.
Tender Engineering Intern
Are you ready to work with a purpose? At ABB, you can be sure you're helping to create a better world. ABB is a global 500 company. Together, we can touch the lives of millions by creating sustainable power plants in remote corners of the world or improving safety for workers in the commercial and industrial venue.
ABB is seeking a Tender Engineering Intern to join our distribution liquid-filled transformers manufacturing plant in South Boston, VA for Summer of 2018. Under general supervision, you will follow specific instructions of a supervisor or lead person to perform professional assignments requiring application of standard principles and practices.
Typical duties/responsibilities may include, but are not limited to, the following:
Support strategic initiatives to grow market; investigate global model disconnects; evaluate quality notifications; investigate slippage reports; collect data and perform analysis as related to costing and quotation pricing accuracy.
Support Tender Engineering team with Lean Six Sigma projects as they relate improving cost and value in the design at the tendering stage.
Support maintenance of the proposal tracking system (Salesforce) including system updates, maintenance and report generation to ensure timely and effective responses to customers and effective coordination of proposal elements offered concurrently to different customers.
Provide research, analytical and promotional support for the Marketing Department in developing competitive information, product requirements, and marketing strategies.
Participate in sales programs to sell company products and services and provide customers with engineering expertise relative to specific product lines. Provide internal and external technical expertise and counsel relating to company products and their marketability.
- Currently enrolled as a full time rising junior or senior in an engineering program at an accredited U.S. based University.
- 3.0+ GPA.
Excellent computer and communication skills required.
Perform duties in a manner fully compliant with prevailing safety and quality procedures and policies.
Available to work overtime as required (OT applicable after 40 work hours in work week).
Perform other related duties as assigned by management.
Surrounding area of South Boston, VA where the plant is located. No stipend is paid for housing.
Candidates must already have a work authorization that would permit them to work for ABB in the US
Equal Employment Opportunity and Affirmative Action at ABB
ABB is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace.
All qualified applicants will receive consideration for employment without regard to their race, creed, color, ancestry, religion, sex, national origin, citizen status, age, sexual orientation, gender identity, disability, marital status, family medical leave status, or protected veterans status. For more information regarding your (EEO) rights as an applicant, please visit the following websites:
As an Equal Employment Opportunity and Affirmative Action Employer, applicants may request to review the Affirmative Action Plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at 1-888-694-7762.
Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at 1-888-694-7762 or by sending an email to US-AskHR@abb.com. Resumes and applications will not be accepted in this manner.
South Boston, Virginia, USA
Contract type: Internship Business unit: Business Unit Transformers
Date posted: 2018-05-04 Job function: Sales Publication ID: US64827851_E2
ABB (ABBN: SIX Swiss Ex) is a pioneering technology leader in electrification products, robotics and motion, industrial automation and power grids, serving customers in utilities, industry and transport & infrastructure globally. Continuing a history of innovation spanning more than 130 years, ABB today is writing the future of industrial digitalization with two clear value propositions: bringing electricity from any power plant to any plug and automating industries from natural resources to finished products. As title partner of Formula E, the fully electric international FIA motorsport class, ABB is pushing the boundaries of e-mobility to contribute to a sustainable future. ABB operates in more than 100 countries with about 135,000 employees. www.abb.com
International Freight Forwarding - Tender Management Analyst Position
RFP RFQ - Tender Management Analyst Position
Leading third party logistics and supply chain management provider,
offering a variety of strategic global shipping and freight transportation solutions.
The Tender Management (TM) analyst is responsible for ensuring that client’s Request for
Quotations (RFQs) and Request for Information (RFIs) are handled effectively and efficiently in
the TM process design. In addition, this role interacts with management on tender related topics
providing ad hoc assistance and pricing support.
The analyst will the follow Tender Management process and guidelines from qualification to
post mortem on each tender processed
Act as the single point of contact and communication, to the sales team, monitoring the
flow of client tender submissions in and out of the TM process
Analyze and qualify all client RFQ submissions per the TM Process, then action
appropriately to the regional Tender Management teams. Depending on request, resources
are available for TM analyst to obtain US pricing directly.
Develop, execute and manage the TM Timeline (multiple tasks and activities) through the
initial RFQ process, client submission, post implementation measurement and support
phases of the operations implementation
Provide ongoing daily management of the Tender process including direct support and
reporting of all regional bid submissions
o Establish Tender Timelines and internal deliverable dates for each RFQ, identify
stakeholders and Subject Matter Experts for the bid and coordinate through the
o Ensure that all information for the client RFQ is distributed to the core bid team
o Provide direct project management of each tender to ensure that timelines are
adhered to and the RFQ response is submitted on time
o Coordinate with the core bid team to ensure content and pricing responses are
accurate per the instructions, anomalies documented and agreed. Review and
quality check response.
o Work directly with sales account owners to ensure that content and pricing
responses are consistent with the client strategy and meet client requirements
- Work on special projects and reports as needed
Manage and prioritize work load, multi-task and manage a mix of issues, responsibilities
and challenges; must be proactive
Ability to analyze large amount of data in Excel (pivot tables, vlookup, slicers etc.)
Willingness to learn and work closely with others to identify needs, requirements and
create solutions to meet internal and external stakeholder requirements
Ability to work flexible hours in order to meet client deadlines
Strong interpersonal skills and effective collaboration with colleagues is important to the
success of this role
Strong affinity for technology and pricing analysis
Bachelor’s degree from an accredited institution
Minimum 2 years of freight forwarding experience, pricing experience advantageous
2+ years of experience in managing RFPs is a plus
Project Management basics
Proficiency in Microsoft
High Pressure Plant Tender (Provisional)
Under direct supervision, tends oil, gas or coal fired high-pressure boilers, incinerator furnaces and related equipment, and assists in the maintenance and repair of this equipment; performs related work.
In the Department of Sanitation, under supervision, operates, repairs, alters and maintains boilers, furnaces, pollution control equipment, and other related equipment and appurtenances; performs related work.
Hand fires high-pressure boilers using solid fuels, and stoker equipment and incinerator furnaces using burnable refuse.
Tends and operates stoker equipment, oil-fired-pressure boilers and incinerator furnaces and related equipment.
Assists in the cleaning, inspecting, testing, maintenance and repair of high-pressure boilers, incinerators, auxiliaries and relative equipment.
May operate a motor vehicle.
In the Department of Sanitation, in addition to the duties above, may be assigned to inspect, clean, test, repair, maintain and alter facility equipment; inspect and read meters, gauges and other controls of operating and related equipment; use hand and powered tools and weld and burn in the performance of assigned duties; work from sketches, drawings and blue prints; requisition parts and maintain inventory; keep records and logs; and supervise assigned personnel. May operate a motor vehicle.
High-Pressure Plant Tender
Two years of full-time satisfactory experience within the last ten years operating and maintaining high pressure boilers or the equivalent marine experience; OR
Not less than one year of experience as described in 1 above plus sufficient training of a relevant nature acquired in an approved trade or vocational high school to make up the equivalent of the remaining required experience. Six months of acceptable experience will be credited for each year of approved trade or vocational high school.
NOTE: For appointment to certain positions a Motor Vehicle Driver License valid in the State Of New York is required. Such license must be maintained for the duration of such appointment.
CUNY offers a comprehensive benefits package to employees and eligible dependents based on job title and classification. Employees are also offered pension and Tax-Deferred Savings Plans. Part-time employees must meet a weekly or semester work hour criteria to be eligible for health benefits. Health benefits are also extended to retirees who meet the eligibility criteria.
HOW TO APPLY
If you are viewing this job posting on any website other than CUNYfirst, please follow the instructions below:
Go to cuny.jobs
In the box under "What", enter "18759"
Click on "High Pressure Plant Tender"
Click on the "Apply Now" button and follow the instructions.
Please note that candidates must upload a complete application of a cover letter describing related qualifications, certifications and experience, a resume, and the names and contact information of three (3) professional references as ONE DOCUMENT in any of the following formats: .doc, .docx, .pdf, .rtf, or text format.
Please use a simple name for the document that you upload, for example, JDoeResume. Documents with long names cannot be parsed by the application system.
ONLY COMPLETE APPLICATIONS OF A COVER LETTER DESCRIBING RELATED QUALIFICATIONS AND EXPERIENCE, A RESUME, AND THE NAMES AND CONTACT INFORMATION OF THREE (3) PROFESSIONAL REFERENCES WILL BE CONSIDERED.
June 7, 2018
JOB SEARCH CATEGORY
CUNY Job Posting: Support Staff
EQUAL EMPLOYMENT OPPORTUNITY
CUNY encourages people with disabilities, minorities, veterans and women to apply. At CUNY, Italian Americans are also included among our protected groups. Applicants and employees will not be discriminated against on the basis of any legally protected category, including sexual orientation or gender identity. EEO/AA/Vet/Disability Employer.
Job Title: High Pressure Plant Tender (Provisional)
Job ID: 18759
Location: Queens College
Full/Part Time: Full-Time
Press Assistant I - Roll Tender
A leading global provider of print and media solutions, Quad/Graphics is powered by a passion for innovation and the most advanced platform in the industry. Our collaborative team of "can-do" people continually challenge the status quo, creating groundbreaking solutions that push the boundaries of communications.
Quad/Graphics is currently seeking a Press Assistant I/Roll Tender to work in the Charlotte, NC Retail Plant. As a member of the press crew, the Press Assistant I (Roll Tender) has previous experience as a Press Asst. II (stacker/jogger) and is able to perform the duties of both positions and may be asked to do so from time to time. Primary responsibilities include but are not limited to:
Understanding standard operating procedures of the department
Manage the paper supply inventory on the press and feed rolls into the press
Coordinate plates and tickets for upcoming jobs and hang paper according to job tickets
Set up and make splices, bend and hang plates as well as hang blankets and assist with webbing up press
Ensure correct ink is available for job and check ink fountains regularly
Set fold during make-readies and check trim sheets to proof and complete necessary roll reports and paperwork accurately
Communicate effectively with plate room and paper warehouse and coordinate changing of ink, etch, and silicone totes as needed
Wash up the press and assist with preventative maintenance.
Candidates must have prior press experience as Press Assistant II (Jogger)
Strong mechanical abilities and knowledge of presses and roll stands and the ability to perform basic math calculations are essential.
Good verbal and written comprehension skills are a must.
Must be able to thrive in a team environment and work independently with minimal supervision.
This position also requires the ability to bend and lift 50 pounds continuously, ability to lift up to 90 pounds occasionally, stand long hours, use hands and wrists continuously and use vision in order to identify defects, performing repetitious tasks in a fast-paced atmosphere with or without a reasonable accommodation.
Additional Company Information
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad/Graphics is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military or veteran status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories.
Drug Free Workplace
Tender Analyst Nordic Job
Date: May 17, 2018
Location:Helsingborg, N, SE
Company: Boston Scientific
Purpose and Passion • Comprehensive Benefits • Life-Work Integration • Community • Career Growth
At Boston Scientific, you will find a collaborative culture driven by a passion for innovation that keeps us connected on the most essential level. With determination, imagination and a deep caring for human life, we're solving some of the most important healthcare industry challenges.
Together, we're one global team committed to making a difference in people's lives around the world. This is a place where you can find a career with meaningful purpose—improving lives through your life's work.
Tender Analyst/Anbudsanalytiker – Boston Scientific Nordic
Boston Scientific is dedicated to transforming lives through innovative medical solutions that improve the health of patients around the world.
Vi utökar vår anbudsavdelning och söker nu en erfaren och driven anbudsanalytiker med placering på vårt nordiska huvudkontor i Helsingborg. Som anbudsanalytiker kommer du leda anbudsprocesser i projektformoch arbeta mycket med analys- och evalueringsmetoder.
Vidare kommer du ansvara för att säkra och strukturera data. Rätt person kommer ha stor möjlighet att påverka utformningen av rollen.
Du rapporterar till den nordiska anbudschefen och blir en mycket viktig del i det nordiska anbudsteamet. Arbetsuppgifterna kommer vara varierande och inkluderar projektledning, analys och utvärdering i olika anbudsprocesser.
Du förser våra säljdivisioner med analytisk support och följer och utvärderar utfall av anbud. Du är lösningsorienterad, initiativrik och har ett eget driv som säkerställer att vi hela tiden utvecklar och effektiviserar våra processer. Du ansvarar för att vi har tillgång till relevant och strukturerad data samt säkerställer följsamhet i enlighet med kontraktsvillkor.
Vi söker dig med relevant högskoleutbildning och dokumenterad erfarenhet från liknande arbetsuppgifter, du är strukturerad och har en mycket god analytisk förmåga och väldigt goda kunskaper i excel. Du är affärs-, och resultatinriktad med god helhetssyn och hög förmåga att prioritera och leverera.
Du kommer ha många kontaktytor inom organisationen och trivs med att samarbeta med många olika personer. Det är meriterande om du har erfarenhet som projektledare.
Vi ser gärna att du har tidigare erfarenhet av att arbeta med anbud, upphandlingar och att du har förståelse för ramverket kring lagen om offentlig upphandling. Du talar och skriver flytande engelska samt något av de nordiska språken. Det är en fördel om du har erfarenhet av SAP.
Vi erbjuder en spännande tjänst i en internationell miljö på ett framgångsrikt globalt företag verksamma inom Medicinteknik. Företaget befinner sig i en expansiv fas med kontinuerliga produktlanseringar. Under sommaren 2018 flyttar vi in i nybyggda lokaler i centrala Helsingborg med närhet till buss-, och tågstation.
För mer information om tjänsten kontakta Evelina Kelvgård, Tender & Pricing Manager Nordic på email@example.com eller på+46 707 42 56 00.
Vi arbetar löpande med urval, sista ansökningstiden är 31 maj
As a global medical technology leader for more than 35 years, our mission at Boston Scientific (NYSE: BSX) is to transform lives through innovative medical solutions that improve the health of patients. If you're looking to truly make a difference to people both around the world and around the corner, there's no better place to make it happen.
Requisition ID: 423785
Job Segment: Medical, ERP, Medical Technology, SAP, Healthcare, Technology
Tender Quotation Specialist
Create and complete bids/estimations/quotations based on customer specification or customer requirements/budget in order to achieve both market competitiveness and high margin for the Company. Maintain and improve the balance between all ABB units and customers that are present in the area of responsibility
Professionals ( > 2 years of work experience)
Formulates competitive bids/estimates/quotations, taking into account best available product mix and appropriate technical and commercial considerations for each individual situation. Ensures tenders are well documented in a timely manner and with appropriate level of detail,including full and accurate costs.
Manages the preparation of all technical (e.g. defining the most suitable technology and product type(s)), financial (e.g. total price sheet, cash flow analysis) and if necessary project management (e.g. quantifies hours of engineering and commissioning) aspects of the bid/estimate/quotation, indicating prices and trading conditions.
In accordance with bid/estimate/quotation planning, ensures that inputs for editing activities are provided on time and according to established quality procedures. Manages external services to support bid/estimation preparation such as translations and governmental approvals.
Collects and archives documentation regarding the offer/order and records assumptions and decisions taken during the development process. Regularly reports the status of the bids/estimates/quotations using defined tools and collects and analyses the reasons for tenders being lost and won.
Identifies potential risks in the bids, quotations and estimates, and in any related contract agreements across customers/channels. Provides information and/or participates in the Risk Review process in accordance with ABB policy.
Responsible for collecting and collating all information needed to prepare the proposal, including both technical and cost elements.
Establishes and maintains effective customer relationships to understand customer needs. Ensures a positive customer experience throughout the sales process. Provides any necessary technical support to Sales Managers during technical meetings with customers.
Identifies potential vendors for equipment and materials required in the project and technically evaluates supplier offers to check match with specifications. Collaborates with Supply Chain Management to coordinate requests to subcontractors.
Advanced English level.
At least 3 years of experience.
Experience of bid and proposals for electrical rooms.
Engineering, civil or similar bachelor degree.
Santiago, Región Metropolitana, Chile
Contract type: Regular/Permanent Business unit: Business Unit Process Industries
Date posted: 2018-04-16 Job function: Sales Publication ID: CL64346371_E2
ABB (ABBN: SIX Swiss Ex) is a pioneering technology leader in electrification products, robotics and motion, industrial automation and power grids, serving customers in utilities, industry and transport & infrastructure globally.
Continuing a history of innovation spanning more than 130 years, ABB today is writing the future of industrial digitalization with two clear value propositions: bringing electricity from any power plant to any plug and automating industries from natural resources to finished products. As title partner of Formula E, the fully electric international FIA motorsport class, ABB is pushing the boundaries of e-mobility to contribute to a sustainable future. ABB operates in more than 100 countries with about 135,000 employees. www.abb.com
Provide Spectacular Service while having positive and knowledgeable interactions with customers. Focus on Customer Service and information sharing.
DUTIES: Completes retail sales transactions (credit card and point of sale) in compliance with established policies and procedures.
Possesses a strong level of telephone etiquette. Demonstrates knowledge of cannabis products and strains to include Sativa, Indica and Hybrids. Provides recommendations regarding appropriate usage and dosage based on method of consumption.
Updates management regularly on customer buying patterns and interactions. Demonstrates an understanding of regulatory compliance and upholds all policies and procedures unique to the industry. Actively promotes spectacular customer service and aides in creating a welcoming atmosphere.
Promotes a professional demeanor in all interactions and transactions. Responds to guest's questions regarding flowers, strains, creams, oils, waxes, concentrates, edibles, tinctures, vape/e-pens. Stocks product.
Actively identifies areas for cost savings. Responsible to maintain a safe environment for guests and colleagues. All other duties as assigned.
QUALIFICATIONS: Must be 21 years of age and possess a valid State of Washington Driver's License.
Experience and/or education in the cannabis industry to include store product knowledge. High school diploma or GED, required.
Air Freight Tender Analyst
Job Title:Air Freight Tender Analyst
Job Location: Miami, FL
DHL Global Forwarding (DGF) is the world leader in air freight services and one of the leading providers of ocean freight services. Around 30,000 employees work to ensure we transport our customers of shipments by air or sea. DGF's logistics solutions span the entire supply chain, from the factory to the shop floor. This also includes special transport-related services.Visit our career site on the web at https://www.logistics.dhl/us-en/home/careers.html
We have an exciting opportunity for an AIR FREIGHT TENDER ANALYST to handle and supportthe execution of our global RFQ process. This position will be based in Miami, FL.
Support the RFQ Gatekeeper from pre-bid to post bid on nominated AFR opportunities
Manage incoming RFQ's andwork together with all stakeholders in preparing, finalizing and delivering a timely and winning tender response
Engage with country teams and regional pricing teams to ensure all bid responses are checked & validated for accuracy, adherence to customer's requirements
Translation and execution of customer pricing template to internal pricing template and back
Develop and maintain strong contacts with internal customers such as Commercial Owner, Industry Sector Sales (Life Sciences and Healthcare, Chemicals, Automotive, Engineering & Manufacturing, Energy, Technology, Consumer and/or Retail),Account- and Product-Management
Support and development of technical narratives related to Airfreight Solutions
Work with Regional AFR teams to facilitate and enable competitive and differentiating AFR pricing solutions
Skills / Requirements:
Minimum 3 years in an Air freight related position (Pricing –preferred- and Operations)
Advanced skills in Microsoft excel
Project management skills
Knowledge of Airfreight forwarding business and understanding of supply chain logistics
Strong communication skills
Effective time management with problem solving and decision making skills
Proven ability to work independently and as a team member
Our Vision: The Logistics Company for the World
Our Mission: Excellence. Simply Delivered.
Our Purpose: We connect people, improving their lives.
Our Values: Respect & Results
Our Goals: Employer, Provider, and Investment of Choice, Living Responsibility
DHL Global Forwarding is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other legally protected characteristics.
WHY JOIN our DHL team?
At DHL, you will be part of a strong team that respects its employees, society and environment.You will interact with people from all over the world and get the chance to experience the unique international spirit of DHL.We offer benefits and programs to help you manage your time at and away at work to achieve a healthy work/life balance.DHL offers highly competitive compensation, incentive, and bonus plans.
In addition, DHL offers the following:
Paid time off: Holiday, Float Holiday, Vacation, and Sick
Medical, Prescription, Dental, and Vision plans
401K plan with a match
Employee Discount plan
Tuition Assistance Plan
As the world's leading logistics' company, DHL offers a wide range of interesting job challenges and opportunities in our different divisions around the globe. Our performance management system supports us in recognizing your potential, evaluating your performance, and continuously planning the development of your career with DHL.We will always enable you to take on responsibility and encourage your growth, personally and professionally.
DHL Global Forwarding will only employ those who are legally authorized to work in the United States. This is not a position for which visa sponsorship will be provided. Individuals who need sponsorship for work authorization, now or in the future, are not eligible for hire for this role.
Roll Tender (39327)
Loads rolls of paper on to automatic splicing unit of web offset printing press. Inspect rolls of paper for blemishes or tears and cust away damaged area with knife.
Roll paper into loading position on automatic splicer, insert shaft of automatic splicer through roll core, secure holding chucks of automatic splicer to shaft ends and thread paper through press components to prepare press for printing. Apply adhesive strip to backup roll and insert backup roll onto automatic splicing unit of press to prepare paper for automatic splicing. Remove roll of leftover paper from press after automatic splicing.
May operate mechanical truck to transport rolls of paper to press area. May assist with some of the make-ready tasks associated with the type of press operated such as hanging plates, examining plates, prepping and installing blankets, adjusting tension, etc. Clean press and install press components to maintain press in working order. May prepare loads of flat stock for a sheetfed press.
Knowledge of offset presswork procedures and materials. Ability to read and follow job specifications to determine materials needed to run each job successfully.
Abiltiy to make adjustment to splicer. Knowledge to load paper.
Previous experience as a roll tender in a commercial print operation preferred.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!