Die Casting Machine Operator Ii Job Description Sample
Grid Casting Machine Operator
Concorde Battery Georgia Corporation manufactures aircraft batteries. Pretty cool, right? We think so. We opened the doors at our Georgia facility in 2014, located just outside of west Atlanta. However, we aren't completely new to the industry. We've actually been in business on the west coast for over 40 years and continue to grow to meet the needs of our customers. Culturally, we believe great people make great companies. If you think you might be a good match, we encourage you to apply.
Concorde Battery Georgia Corporation is currently looking for a driven candidate to start a career working in the Grid Casting Department. Successful candidate will need to fulfill daily production requirements given from the department supervisor. The position will work at various workstations within the Grid Casting Department assisting in preparing grids and other battery parts. The candidate will be given hands on training by the supervisor and colleagues; this is an exceptional career opportunity. Previous experience is not required but a plus. Overtime commonly available.
Follow written and oral instructions.
Operate grid casting machine, making adjustments to controls to stay within required specifications.
Monitor weight and thickness of grids throughout the day.
Adjust machine speed for optimum quality product and production rates.
Spray grid mold to meet quality specifications as needed.
Report production numbers at the end of shift.
Hand pour small parts.
Use hand torch when needed.
Change molds on small parts machine and grid casting machine.
Make burning bars for assembly department.
Inspect small parts for assembly department.
Work in hot and cold environments.
Add lead to pots as needed.
Review procedures for correct process verification.
Standing for long periods of time
Maneuver up to 80 pounds.
Reaching, carrying, bending/stooping, pushing/pulling.
Wearing a respirator and other required personal protective equipment (PPE).
Comply with all safety requirements; participate in safety training/practices.
Maintain a clean work area and follow company hygiene guidelines.
Use small hand tools.
Communicate to supervisor when detecting defective materials.
Work with and around hazardous materials.
Education and Qualifications:
High School Diploma or GED
Read, write, and speak English
Punctual and reliable
Must complete pre-employment physical/drug screen
- Monday Thursday 6:00am - 4:30pm
Perks and Benefits:
Desired first shift schedule
Premium Health Insurance - $0 employee premium & $0 deductible
Company provided life insurance for all employees with $0 employee contribution
10 paid holidays
Overtime commonly available
Employee reward program
Credit Union Membership
Employee Referral Bonuses
This position description and benefits reflects the general level and nature of the job, is subject to change, and is not to be considered as all inclusive.
For more information about Concorde Battery Georgia Corporation please visit our website at www.concordebattery.com
CONCORDE BATTERY GEORGIA CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER.
High Pressure Die Casting Development Operations Manager
Tesla is looking for a highly motivated technical Manager for our Aluminum High Pressure Die Casting development facility where you will be tasked with leading a team to install and commission new equipment in order to prove out product design concepts and novel manufacturing methods. This role will also be responsible for overseeing process development to achieve cast structural components per specified quality requirements and then ramp the process to demonstrate sustained high volume capability. You'll be tasked with building up a team of skilled process technicians to start, run and trouble shoot equipment and tooling under the guidance of their counterpart Engineering team. Once the equipment and process have demonstrated capability, it will be transitioned over to the production organization to sustain serial production. At that point, this leader and team will transition to the next project to launch, likely at a different site.
Run melt furnaces, melt transfer, melt holding/treatment, dosing, die cast machine (including the die, spray robot, extractor robot) and trim cell, including all day-to-day operations, including supervising the technicians operating the equipment prior to transition to production.
Build and lead the hiring for various high pressure die casting related technicians to operate the various pieces of equipment in all aspects.
Schedules equipment in accordance to development schedules.
Coordinates and updates status with other departments.
Maintains a safe and clean work environment in compliance with safety standards.
Provides coaching and guidance to employees.
Maintains training and support for machine operators.
Analyzes workforce requirements.
Demonstrates strong managerial/leadership skills.
Operates machinery efficiently and effectively to make good parts.
Optimize and improve production process to meet development goals.
BS/MS Engineering in Metallurgical, Materials, Mechanical, Mechatronics or related fields.
8+ years of experience in management and manufacturing production managing and hiring large production teams.
5+ years of experience in general management/supervision of all phases of the Aluminum high pressure die cast department including daily production, scheduling, training, and quality control.
5+ years of experience establishing quality standards, ensuring standards are met, training and communicating policies and procedures, auditing and analyzing processes, measuring production, and reporting results to executives.
Experience with part quality and process control requirements associated with structural die castings.
Hands-on experience with aluminum melting, transfer, holding and treatment equipment.
Hands-on experience with large (>2,000T) high pressure die cast machines.
Hands-on experience with preventative and corrective maintenance of Fanuc robots.
Hands-on experience with PLC / controls programming in Allen Bradley.
Die Casting Process Engineer
Develops processes to support the Safety Systems Division in their efforts to increase productivity and quality by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Introduce all measures necessary to maintain best possible standards and process-reliable conditions in a highly automated, High-pressure Die Casting process. Responsible for supporting die designs, set-up samples and trial evaluations, including replacement dies or new model dies.
Participate in the development and implementation of improvement plans that target cycle time reductions and minimalize scrape. Experience with Die Cast tooling. Ability to manage die design and manufacture of Die Cast dies and all of its components.
Conducts activities to assure quick delivery, on-time launch/prototype parts of continually improving quality. Interface with design personnel at development stage to suggest designs that will improve efficiency and reduce cost. Communicate with quality assurance in developing dimensional, ES testing specifications to point out potential high scrap items and deal with them before design in complete.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
Bachelor's degree (B. S. / B.A.) from four-year College or university; or one to two years related experience and/or training; or equivalent combination of education and experience.
Ability to read and interpret documents such as drawings, operating and maintenance instructions, and procedure manuals. Ability to write trial reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
REASONING ABILITY AND PROBLEM SOLVING SYNTHESIS
Ability to define problems, collect data, analyze data and form hypothesis. Must have ability to interpret an extensive variety of technical instructions in mathematical or sketched form.
1.Talking communication in 1 on 1 or group environment.
2.Hearing reasonable with or without aid.
3.Walking and standing-average ability or above.
4.Normal dexterity with hands, arms and fingers to operate tools.
5.Ability to lift 55 lbs.
6.Has 20/20 vision with or without eye glasses / contacts.
7.Mental attentiveness and alertness to surrounding environment.
We require eye protection on work floor as well as foot protection, and hearing protection in certain areas.
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is at times exposed to risk of electrical shock.
The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; and extreme heat. The noise level in the work environment is usually loud.
Machine Operator - Threadroller II
Job Description: Arconic Fastening Systems (AFS) has an immediate need for an experienced Machine Operator. This is an opportunity to grow your career at a large, international aerospace company. The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), a 401k matching program, and paid holidays and vacation. This position is located at our plant in Torrance, CA.
Arconic Fastening Systems (AFS) holds the number one global market position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our multi-material fastening systems are found nose to tail on aircraft and aero engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Headquartered in Torrance, CA; AFS employs over 7,500 people in 13 countries at 38 locations. AFS is a business unit of Arconic (NYSE:ARNC).
Join Arconic and join a network of people who are passionate about industry-changing technology that advances the world. You'll have the opportunity to work with leading global companies that operate in world-changing industries—such as aerospace, automotive, building and construction, defense and commercial transportation. It's not just a job. It's a career and a path to the future. You'll be part of a diverse culture of learning, teaching and mentorship. Arconic is fully committed to developing people: providing employees with the resources, and learning and development opportunities they need to excel and build a career.
Essential Knowledge & Skills / Education
Operate Flat and Cylindrical Thread Die Machines.
Production of parts meeting drawing and specification requirements
order and maintain inventory levels of requires tooling, gages, and supplies
Participate in assuring team tooling and material readiness. (assemble tooling set-up kits, stage raw materials and perform external set up tasks, as required.
Participate in setting and achieving team and individual productivity and quality targets.
participate with team in continuous improvement efforts.
Perform team machine inspections including daily, weekly and monthly preventative maintenance tasks.
Perform shop floor housekeeping duties.
Prepare daily production reports and forms.
Perform other tasks as needed in support of production team and team leader.
Work in a safe manner that promotes the health and well-being of the individual and the environment
Comply with all EHS rules and regulations and supervisory instructions.
Report all incidents including injuries, spills, fires, property damage, and rear misses to their supervisor.
Must have good communication skills and know basic shop math
Must be able to read, write and understand English
Ability to write routine reports and correspondence
Ability to speak effectively before groups of customers or employees
Ability to lift/move up to 30 pounds regularly
High school diploma or equivalent;
Minimum of 3 years experience in precision metal forming and/or component assembly experience.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.;
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee
Machine Operator II - FAB - 2Nd Shift
Job ID :
US - North Carolina
When you're part of the team at Thermo Fisher Scientific, you'll do important work, like helping customers in finding cures for cancer, protecting the environment or making sure our area is safe. Your work will have real-world impact, and you'll be supported in achieving your career goals.
Helps department meet production needs by running various types of fabrication machines (spot welder, timesaver, press brake, turret, stud press, etc) or other duties as required by Supervisor. Enters inventory transactions into BaaN ERP system, understands the impact of the various transactions on inventory accuracy. Maintains the fabrication finished parts market, pulls parts to be delivered and stocks the shelves with new inventory. Runs reports and creates charts for the fabrication cells.
Job Duties and Responsibilities:
At work on time every day and in your work area when scheduled. Works overtime and weekends when needed to accomplish production goals.
Coordinates record keeping by maintain related documents, logs, and files for the department.
Performs pay point transactions in BaaN.
Accurately processes parts orders, maintains transactions and troubleshoots problem transactions to insure inventory accuracy.
Opens fabrication production orders.
Creates press shop order packets.
Closes press shop orders, in Press Tracking and in Baan.
Reorders raw materials and finished parts using the Kanban inventory system. Maintains Supermarket racks and inventory accuracy using the correct part numbers and bin locations.
Maintains steel bay inventory and orders steel for press shop consumption.
Makes accurate inventory transfers between departments.
Pulls parts from market shelves, loads tugger carts and processes Kanban cards.
Moves parts, components, finished goods manually or with work aids including hand jacks, hoists or fork trucks (once certified.)
Performs other duties, provides support and coverage on all operations in fabrication. Cross training and flexibility required.
References work instructions and reviews print specifications to determine proper materials and set-up to accomplish production requirements.
Reads and interprets specifications and drawings.
Visually inspects assembly for quality standards.
Verifies dimensions and makes adjustments as needed to ensure proper fit and specified tolerances are maintained.
Advises supervisor of quality problems and the status of jobs. Works with production personnel, other operators, Supervisor and/or the engineering staff to troubleshoot problems.
Properly tracks and disposes of scrap and completes non-conforming tickets. Directly responsible for all scrap/rework that is created by his/her cell.
Verifies and completes job routing by signing router sheet, submitting orders to be closed and parts to be posted to inventory.
Uses a wide range of small hand tools such as hammer, wrenches, pliers, screwdrivers, sockets, Allen wrenches, etc.
Trains and mentors new employees or transitioning workers in the area.
Receives verbal instructions, reads production board or confers with Supervisor or Coordinators for instructions and priorities.
Maintains clean and organized work area that supports co-workers as well as safety, efficiency, quality and customer demands.
Communicates effectively within cell or with other departments to relay key information. Open to and asks for suggestions and opinions of others regarding production issues and goals.
Performs all job duties within ISO standards
Performs all duties using required safety procedures and equipment according to company policies and practices.
Performs all job duties consistent with the Code of Ethics and the 4-I Values, serves as a role model in the workplace.
Fully engaged, initiates activities that support department and team goals, suggests improvements in work methods and is actively involved with all of the team activities within the department.
Participates on teams using Microsoft software for data analysis or presentations. Utilizes computer systems to check e-mail, complete on line training and complete PMDs.
Supports Continuous Improvement PPI, and Lean manufacturing initiatives.
- Education – Minimum of a high school diploma or GED
- 6 - 12 months data entry, inventory control and/or metal fabrication is preferred.
Proficient in Microsoft Word and Excel, experience with Baan is a plus. The ability to troubleshoot inventory transactions and make corrections with previous experience in metal fabrication and lean manufacturing environments preferred.
Frequent and continuous light to moderate lifting of 35 pounds, repetitive handling and maneuvering of awkward metal pieces is required. Walking, reaching, bending, and good eye, hand, foot coordination is all necessary. Occasional lifting of heavy dies is required.
Exposed to possible severe hazards, multiple pinch points and general safety issues associates with sheet metal fabrication. Works in hot, cold, dusty, elevated and noisy area.
Thermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status.
Machine Operator II
Overview: As the manufacturer of Dart® and Solo® brand products, Dart Container is an industry leading single-use food and beverage packaging company. With 15,000 employees and 40+ locations worldwide, Dart offers more than 4,000 products used every day in restaurants, hospitals, schools and homes around the globe.
Benefits: Dart Container full-time employees enjoy great benefits, including medical, dental, vision, life insurance, 401(k) with company matching contributions, paid vacation, paid holidays, short-term disability, tuition assistance, product discounts and more.
Responsible for the safe and efficient operation of cup formers to produce a quality product. Operates various production machines making adjustments to maximize up time, rates and yields. Meets company standards for safety, quality, production and process improvement.
Reads and reviews daily production schedule.
Maintains quality and speed control by continual adjustments of gauges that control temperature, pressure, trim, rolls and speed to material.
Completes daily reports including cycle time, daily production, scrap tickets and packaging.
Performs general preventative maintenance on equipment. Monitors machines for mechanical problems by listening for unusual noises and visually checking gears, hoses, gauges, materials, etc.
Initiates troubleshooting and solving mechanical problems. If unsuccessful in making repairs, notifies supervisor and/or maintenance for assistance.
Ensures adequate packaging materials and rolls (if applicable) are available in the department for production runs. Follows roll change procedures and threads rolls into machine (if applicable).
Performs changeover and set-up.
Keeps general work area clean.
Provides guidance to Product Handlers and Forklift Operators on moving materials.
Performs other duties as assigned.
Core Skills and Qualifications:
The ideal candidate must possess all of the following:
Two (2) years experience operating manufacturing equipment preferably in packaging or paper conversion.
Experience using process control equipment preferred.
Ability to use measuring devices.
Math skills including addition, subtraction, multiplication and division.
Ability to work weekends as needed.
Ability to work overtime as needed.
Demonstrate minimum proficiency with the English language in order to ensure effective new hire training and on-going communications about safety and quality issues.
Dart Container is an equal opportunity employer and will consider all candidates for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.
If you have a disability and need an accommodation to access this website or for the application process, you should call Dart at (800) 545-3278 Ext 3370 or email us at ADArequests@dart.biz. Relay calls can be made by dialing 711 or the relay number for your state.
If you experience difficulty applying online, you may call (800) 545-3278 Ext 3390 or email us at firstname.lastname@example.org for assistance.
Machine Operator Tier II
Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains. Serving three primary markets – passenger vehicle, commercial truck, and off-highway equipment – Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities.
Dana is seeking Machine Operators to work at their Pottstown, Pa Facility.
Duties and Responsibilities:
Operate, load and unload Machines; CNC, Drill and Tap, Gnutti, Grinder, Groover, Okuma, Pin Loader, Profile Broach, Turning Machines, etc.
Produce parts in accordance with established standards
Inspect and gage parts per quality control plan through utilization of micrometers, calipers, and other types of manual and electronic gauges as required
Finish parts using hand held grinders, deburr tools, etc.
Complete all required paperwork including recording all pieces produced, defects and scrap
Maintain housekeeping of work area and equipment to ensure a safe, clean and orderly condition
Work safely in accordance with all policies, procedure and work practices
Perform special instructions/request as determined by the supervisor
Possess basic mechanical ability
Ability to work in a team environment
Willing to rotate jobs
Attendance is mandatory and must be on time for work
Work overtime when needed on any shift depending on plant needs
Light to moderate physical effort. Regularly required to stand and reach.
Able to lift up to 25 pounds on a regular basis and push/pull with a force up to 50 pounds
Able to climb, stoop or bend to move parts and clean machines and work area
Pass pre-employment background check and drug screen
Education and/or Experience:
High School Diploma or GED Required
Manufacturing Experience (referred)
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Machine Operator II (H5)
Machine Operator II (H5)
A Place to Build Your Future
We are the food industry's largest contract manufacturer, has an opening for a Machine Operator. If working in a fast-paced, world class food plant interests you, we may have an opportunity.
We are one of the fastest growing food companies in the US; part of the new wave of American manufacturers and we are looking for people with the right stuff.
Who We Are
We are a new kind of food company, and the industry's largest contract manufacturer. You won't find our logo on store shelves, but our passion for quality and efficiency is evident in every product we make.
Founded in 2009, we operate 19 facilities in seven states, employing over 7,500 people. In an industry growing at 2%, we made the Inc. 500 Fastest Growing Companies list three straight years. Our customers are some of the world's finest food companies.
We are currently looking for 2nd and 3rd shift Machine Operators. This person meets production schedules, maintains employee and product safety, adheres to all GMPs (good manufacturing practices), and maintains appropriate documentation.
This role must be willing to work some weekends, depending on production schedule.
This can be a physically demanding role requires a high level of overall fitness and stamina. It also requires leadership ability, good verbal communication skills, an attention to detail, and the ability to work well on a team and with people from multiple departments.
It is fast paced and good reasoning and problem solving skills.
A detailed job description with responsibilities and requirements, which may vary by location, will be provided during the interview process.
Education, Experience and Training
High school diploma or GED preferred
Manufacturing experience preferred
Lean, Six Sigma experience a big plus
Related or similar work experience a plus
We offer a highly competitive wage and benefits package, including full healthcare benefits, 401(k) and more.
If you are seeking an opportunity in world class manufacturing with a dynamic company, if you possess the skills and traits described above, and if you are ready for a challenge, we would like to hear from you.
2nd or 3rd shift.
D Shift Machine Operator II
Works on the manufacturing shop floor to ensure machines are running at maximum efficiency and produce quality parts during the shift.
D Shift works Wednesday, 12am
6am and Thursday
Specific duties include:
Responsible for operating HAAS CNC machine
Responsible for loading & unloading parts
Responsible for changing offsets in the machine if needed
Responsible for properly loading programs to the machines
Responsible for tool changes & setting tools
Responsible for supporting and reporting issues to team lead/supervisor
Follows all processes and procedures during the shift, escalates problem areas to shift team lead/supervisor as appropriate
Responsible for maintaining a neat and organized production area consistent with RAMP housekeeping standards
Ensure jobs are run in a timely manner to ensure on-time delivery
Able to read blueprints and use measuring tools to ensure correct tolerances
Responsible for quick turnaround of parts and accuracy within established guidelines
Responsible for working in a safe manner consistent with RAPID policies
Responsible for ensuring completion of operator PMs during shift
Self-starter capable of dealing with a variety of tasks in a fast paced, multi-tasking environment
Excellent problem-solving skills
Good communication skills - ability to interpret and explain written and statistical data
High standard of attention to detail
Solid commitment to customer or employee service
Ability to manage time and prioritize work in an effective manner
Highly developed, demonstrated teamwork skills
Demonstrates a high degree of confidentiality
Demonstrated ability to increase productivity and continuously improve methods, approaches, and departmental contribution while being cost-sensitive
Commitment to continuous learning
Knowledge of Machining in a prototype manufacturing setting or related experience and education
Ability to strive in an environment of constant change
Familiarity with the tools of the trade Microsoft Office suite of products, SolidWorks, CAD/CAM
- High school diploma or equivalent degree
All Proto Labs facilities in the United States are ITAR-compliant operations. Due to ITAR regulations, Proto Labs is only able to employ U.S. Citizens, lawful permanent residents (green card holders) or foreign nationals granted refugee or asylee status. Individuals with temporary visas (e.g. E, F-1, H-1, H-2, L, B, J, TN or OPT) are not eligible for hire.
Proto Labs, Inc. is an Affirmative Action / Equal Opportunity Employer
Machine Operator - Fabrication II
Generac Mobile Products – Work with the leader in the power industry! Our office in Berlin, WI is seeking a Machine Operator - Fabrication II.
The Machine Operator – Fabrication II is expected to perform under the direction of the area supervisor, manufacture parts per plant specification in an accurate and timely manner utilizing a CNC Machining Center/Fabrication equipment while recognizing safety and efficiencies. This position reports directly to Production Manager or Supervisor.
Essential Duties and Responsibilities:
Regular and prompt attendance and the ability to work schedule as define and overtime as required.
Set up, adjust and operate CNC Machining Center
Read and interpret blueprint specifications to determine procedures, verify programs and tooling
Perform complex machine set ups and critical operations
Position and replace tools, and set in relation to machine
Use a variety of precision measuring devices to set up and adjust work and verify conformance of work to specifications
Understand special material handling required for materials and equipment used in the work cell
Assist in other work areas as needed
Repair/correction of errors
Participation in training sessions
Strong mechanical aptitude and mathematical skills.
High School diploma or equivalent
An understanding of machining/fabricating fundamentals
Experience working with fabrication machines, specifically milling machine/Brake/Turret drill press, saw, grinder.
Ability to effectively communicate
Contributes to identifying problems and implementing appropriate countermeasures.
Intermediate PC knowledge.
Basic knowledge of Microsoft Office products
Strong problem solving and reasoning skills
Ability to perform reading, writing, and math functions.
Preferred experience on equipment and automation consistent with a metal fabrication, paint, and assembly operation.
Intermediate mechanical aptitude, ability to understand complex issues and systematically work toward resolution.
Ability to interpret drawings, schematics and machine specifications.
While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to manipulate objects, tools or controls and talk or hear. The employee is regularly required to walk; stoop; crouch; bend and reach above shoulders. The employee must frequently lift and/or move up to 50 pounds unassisted and up to 100 pounds with assistance, waist high, up to 10 feet away. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Temperatures can vary from cool to warm depending upon the season. The employee must comply with the assigned location PPE requirements including but not limited to safety glasses, hearing protection, appropriate gloves, clothing and shields for required tasks and closed toed or safety shoes as required by facility safety policies.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!