Drill Operator Automatic Job Description Sample
Automatic Punch Press Operator
- Performs typical progressive die and press operations
- Setup and remove tooling
- Observe press in operation and make adjustments to control rate of production
- Monitoring equipment/tooling during production stamping to ensure it is working properly. i.e. watching gages, dials, etc.
- Quality inspections during production runs
- The use of micrometers, calipers, etc. to inspect/measure/visually inspect parts to ensure they conform to specifications
- Includes making minor repairs/maintenance such as oiling and cleaning up around the press when complete
- Communicating clearly and concisely with the supervisor, other production personnel and quality personnel when a problem arises
- Accurately complete a job routing ticket, data chart, time sheet etc.
- Maintain and accurate count of parts
- Assist in setting up steel coil on larger presses
- Possible second shift during peak production periods or as needed
- Extended period of standing while operating press and running production
- Follow all prescribed safety regulations i.e. PPE (safety glasses/hearing protection) etc.
- Safely handle scrap during and after production run
- Keep are clean and organized in a 5S manner
- May assist in training of other employees as required
- When applicable, use computers for data entry in MRP or spreadsheet in a specified and appropriate manner
- The employee is exposed to high noise levels from operating machine
- Ability to lift 30 pounds
- Potential hazards from moving equipment and machine parts, nuisance dust, and skin exposure to cutting and drawing oils
- The employee is required to stand, walk, pull and bend to the floor
- 2+ years of setup and operator experience
- Education – High School or equivalent
- High school or equivalent
- Metal Stamping: 2 years
- Worked with Steel Coils: 2 years
- Press Operator: 3 years
Directional Drill Operator – Underground Utility
Under general supervision, this position performs tasks associated with the construction/upgrade of cable television or telephone systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Ability to operate backhoe, mini excavator, directional boring machine
Ability to provide basic service in equipment
Ability to restore and landscape disturbed areas of the jobsite
Ability to load materials
Performs site set-up and clean-up
Ability to clean vehicles, trailers, tools and equipment
Ability to safely and correctly direct multi-directional traffic with appropriate signage
Ability to follow simple instructions
Must have previous experience operating mini excavator, directional boring machine
Must have one to three years utility construction experience
Class A CDL preferred
Must have ability to follow directions
Must have the ability to operate manual and mechanical equipment necessary to complete jobs
Must have or able to obtain knowledge of “safety systems” associated with trenching and/or drilling including
set-up and emergency procedures
The employee shall follow all safety rules at all times.
The employee shall not engage in unsafe acts.
The employee is expected to attend and participate in all safety meetings and training.
The employee shall use all prescribed safety equipment that is required to safely do the job at hand.
The employee shall report unsafe acts or conditions to his or her immediate Supervisor or Safety Personnel.
The employee shall report any and all injuries, accidents and/or incidents immediately their immediate
The employee shall be a safe worker on and off the job.
This position does not have supervisory duties.
ON-CALL AND TRAVEL REQUIREMENTS
This position may require being on call. Employee will respond to emergency call between the hours of 5:00 p.m. to 8:00 a.m. This position may require weekend work, night work and/or overnight travel.
EDUCATION AND EXPERIENCE
A High School Diploma or general education degree (GED); or one (1) to three (3) months related experience and/or training; or equivalent combination of education and experience.
CERTIFICATES, LICENSES, REGISTRATIONS
Must be able to drive a manual transmission vehicle and have a valid Class A drivers’ license.
mini excavator, directional boring, CDL, Directional Drill, Operator
NC Drill Operator -Swing Shift (3:30 Pm - Midnight) - (34577)
NC Drill Operator
Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market.
Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.
The primary function of this position will be performing mechanical drilling on printed circuit boards.
Nature of Duties/Responsibilities
The qualified individual will work with mechanical drill equipment. In addition, the employee will be required to inspect own work for quality and accuracy.
Education and Experience
Minimum 2 years printed circuit board mechanical drill experience including controlled depth drill and back drill. (Will consider training for less experienced candidates.)
Must understand process travelers, customer specifications and tolerances specified on travelers or blueprints.
Familiar with printed circuit board Excellon drilling equipment.
Must be available to work overtime and weekends.
Must have good verbal and written communication skills.
This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.
EEO Employer Vets/Disabled
Plasma Drill Operator (Evening Shift)
955 North Haverhill Rd El Dorado Kansas 67042-4806 Why Valmont Welcome to Valmont, where a world of opportunity awaits. When you join our team, you become part of a passionate group dedicated to changing lives and conserving resources around the globe.
We want problem solvers who roll up their sleeves to foster progress and innovation for all people. At Valmont, we provide infrastructure, irrigation, tubing and coatings to the world. We strengthen cities.
We nourish croplands. We design, manufacture and coat. Our products and services make a difference.
Join us, and BUILD YOUR WORLD. How you will contribute Valmont is currently seeking a highly motivated and talented individual for the Plasma Drill Operator (Evening Shift) position in the Global Utility Division. We are looking for a highly driven individual that will set up and operate the Plasma Drill.
Additionally, you will… Be familiar with NC controls and data entry Download programs and enter into the system Be responsible for keeping the machine clean and performing operator preventative maintenance as needed Work timely and expeditiously to deliver an on-time product without manufacturing errors Perform other duties as directed by leaders and management Participate in department safety, demonstrate excellent safety practices and behaviors which conform to all Valmont safety policies and procedures What it takes Required Qualifications The ability to read and decipher blue prints and flat sheets The ability to prioritize work in order and complete deadlines The ability to work through and solve practical problems The ability to work timely and expeditiously to deliver on-time, high quality results Must have a high awareness for safety at all times Highly qualified candidates will also possess: High School Diploma or GED equivalent One year of previous experience setting up and operating a Plasma Drill One year of previous experience in a manufacturing or fabrication environment One year of previous experience with overhead crane operations The ability to communicate and interact with coworkers in a positive manner The ability to pay attention to detail and follow work instructions Must be a person of passion and integrity who has the drive to excel and deliver exceptional results #UT (Utility) Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment, call (402) 963-1115 or email EEOCompliance@Valmont.com.
Directional Drill Operator
Why join the Bear family? We offer an exciting, challenging and dynamic work environment.
Bear Communications is committed to the pursuit of growth and use of innovative technologies to improve our company and increase our service offerings. We envision a future where our company is the number one c...
Operates horizontal directional drill in accordance with blueprints and designated plans
Maintains company equipment per service requirements and safety guidelines
Assists with construction clean-up as necessary
Any other duties and responsibilities as assigned
Willing to work outside in varying weather conditions
High school diploma or General Education Diploma (GED) preferred
Previous experience in standard and high-risk areas a preferred
Previous experience in underground fiber and coax construction a plus
Previous rock boring experience a plus
Knowledge of utility depths and placements
Possess general knowledge of construction practices
Knowledge of reading and understanding blueprints is required
Knowledge of AT machines a plus
Possess a Commercial Driver's License (CDL) Class AWilling to work outdoors in all types of weather (i.e. snow, rain, wind, etc.) if required
In addition, the ideal candidate would have the following attributes:Ability to work in various environments/settings with moderate to loud noise levels
Equipped to work in trenches, manholes and tunnels
Prepared to sit, stand, stop, crouch, reach and lift for long periods of time
Able to lift up to 50 lbs. unassisted
Capable to use full-range of motion in fingers, hand and wrists to operate necessary tools/equipment Bear Communications is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.
Radial Drill Press Operator
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us and you can build something better for yourself, for our customers and for the world.
Machinists in this position set up, operate and adjust radial drill press machines to rough out and finish holes in machined parts from various types of material, using jigs and fixtures. Frequent handling, carrying 10-35 pounds, cccasional carrying less than 10 pounds, bending at the waist, lifting 10-35 pounds, lifting less than 10 pounds , pushing/pulling 10-35 pounds, pushing/pulling less than 10 pounds, reaching, standing, walking. Frequent contact with Metals and occasional contact with lubricants. Occasional exposure to atmospheric conditions. Continuous use of face/eye protection, hearing.
Duties and Responsibilities:
Obtain work assignment from lead, supervisor, hot list or use on line computer systems. Work is determined by schedule/priority.
Check oil/coolant levels, initiate maint. and/or repair ticket, as required. Identify type of set-up required (e.g., production orders, first lots), determine work to be performed (e.g., lift hole, pre-bore hole, opposite face work) by reviewing work order (W/O), tie-in sheets, operator's or setup documents or blueprints.
Obtain appropriate drawings, Boeing (BAC) specification, documents and/or sketches, using computing systems (e.g., Bold/Web, BOLD Lite).
Ensure that correct material (e.g., type/size/quantity) and tools/fixtures were called out/issued.
Layout, plan, sequence work, use shop math and trigonometry to calculate dimensions. Select machine accessories (e.g., chucks, clamps, locating pins).
Identify fixtures, shop aids to be used and fabricate shop aides using appropriate equipment (e.g., bandsaw, drill press, sander).
Attach machine accessories, tools, fixtures (e.g., drill jig, stop blocks, set screws) and shop aids, using wrenches, bolts, and clamps.
Select /check cutting tools (e.g., drills, reamers, taps).
Ensure cutters are correct type, length, diameter, radius, and in good condition. Load/unload cutters, using tool holders (e.g., quick release/speed chuck, standard chuck) and hand tools (e.g., wrenches, mallets, spanners).
Load/unload work piece on drill table manually, with hydraulic lift cart or an overhead crane.
Set machine index points per drawing/work order, including drill, router and/or tap depth compensations, tool heights, by using radial drill controls (e.g., arm adjustment, head adjustment, spindle depth).
Run machine to perform machining operations (e.g., drilling, reaming, tapping, spot facing, counter boring).
Adjust machine settings to correct machining problems or to prepare machine for next operation.
Monitor machine during operation to ensure smooth operation.
Perform bearing installation into detail parts and roller swage retention, using appropriate equipment (e.g., arbor press, radial drill, swaging tools) per drawing, BAC specification and W/O, as required.
Check work after completion of each operation to ensure parts are complete per drawing and that there are no defects. Remove sharp edges/burrs from part using appropriate tools.
Dimensionally check key features, using precision measuring tools (e.g., micrometer, caliper, bore gauge).
Sell completed job or in-process checks to inspector at appropriate steps in sequence. Perform minor rework.
Coordinate with lead/layout man or use computer to route parts to another organization/shop (e.g., bore machining, milling, tooling) for completion.
Assist others with setups, methods and procedures by passing on information/answering questions.
Handle/dispose of hazardous materials (e.g., coolants, solvents) in approved manner per Mat'l Safety Data Sheets (MSDS).
Maintain personal and tool certifications.
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Relocation Assistance Available
No. Relocation assistance is not a negotiable benefit.
- High school graduate or GED preferred.
Required Skills & Experience:
- Experience with Enovia viewing CATIA V5 models.
US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.
This is an hourly position governed by the IAM Collective Bargaining agreement.
Contingent Upon Program Award
Car Washer - Automatic Car Wash Operator - Infiniti Of Sarasota
Car Washer - Automatic Car Wash Operator needed to join our elite team at Infiniti of Sarasota!
We have a brand new, state-of-the-art building with modern equipment on Clark Road. We need dependable, hard-working people with high standards to help us continue to provide an elite level of service. Steady work is available as well as an opportunity for advancement for an individual with a strong work ethic. Starting pay of $11-13 an hour. This is a full-time position with full benefits.
Please apply in person to Mike P at Infiniti of Sarasota, 4950 Clark Road.
Car Washer Duties
This key position is responsible to ensure Infiniti clients receive their vehicles in pristine condition. Duties include:
Drive customer service vehicles, new cars, and loaner cars through automatic wash bays.
Dry and vacuum all vehicles.
Perform minor detail work, i.e. clean windshields, vacuum interior, scrub rims, etc.
Refill soaps and other chemicals, following guidelines
Other duties as assigned
Car Washer Requirements
Dependability is a must!
Ability and willingness to perform fast-paced, physically demanding work all day.
Candidates must have a valid driver's license and verifiable work history.
Must pass background and drug screen.
Sunset Automotive Group Benefits
401(k) Retirement Plan
Short-Term and Long-Term Disability Coverage
Flexible Spending Accounts
2 Weeks Paid Time Off after one year
If you are looking for a place to work where you will have opportunities for growth and be appreciated, this might be the place for you! Enjoy your job and the people you work with at Sunset Automotive Group!
Cme55 Drill Rig Operator And Technician
NV5 (NASDAQ: NVEE) is a provider of professional and technical engineering and consulting solutions to public and private sector clients in the infrastructure, energy, construction, program management and environmental markets. NV5 is an ENR Top 500 firm; we offer a full range of professional services in offices throughout the U.S.
NV5 has a need for a driller for a CME 55, performing geotechnical investigations statewide. Requires a CDL and Hazwoper. When not drilling, operator will maintain rig, and will be able to work as a Laboratory or Field Technician; willing to be cross-trained and ability to obtain basic New Mexico Technician Training and Certification Program (TTCP), American Concrete Institute (ACI), and/or National Institute for Certification in Engineering Technologies (NICET) certifications for performance of construction materials testing duties as assigned.
Operate and maintain CME55 drill rig.
Welding as needed to maintain augers. Work as Lab/Field Technician as needed.
High School graduate or equivalent with strong math and reading skills.
Must be able to calculate basic equations, and write legibly.
Hours are 7am to 4pm Monday – Friday, some Saturday work when needed.
Must have a clean driving record.
CDL, Hazwoper (40hr), 811 for underground locate.
Willingness/ability to obtain basic construction materials testing certifications (soil, concrete, etc.).
NV5 offers a complete and competitive benefits package.
NV5 provides equal employment opportunities (EEO) to all applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NV5 complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Laser Drill Machine Operator
Our client is seeking a Drill/Laser Drill Operator in Littleton, Colorado. Experience in running production machinery is preferred, but will train the right candidate that is mechanically inclined and dedicated to quality.
Third Shift: Mon-Fri, 11pm-7:30am
Broad Function: Drill operators independently set up and operate multiple numerically controlled machines simultaneously to drill holes, slots, counter-bore, etc. in panels per customer requirements.
Principal Duties and
1. Perform standard and complex machine set-ups including downloading of drill programs
2. Verify the travelers, prints and CAM programs.
3. Selection and set-up of correct bits
4. Alignment of panels to the machine.
5. Perform registration analysis using X-ray machine.
6. Make corresponding scale corrections.
7. Visually inspect panels for hole-size and missing holes utilizing drill check film.
8. Utilize machines to meet required productivity standards.
9. Preventative maintenance on machines
10. Troubleshooting machines
11. Prioritize work dependent on operational time and delivery schedules.
12. Keep area clean and orderly, and observe all safety codes pertaining to the work area.
- Able to read and interpret travelers and oral and written work instructions in English.
- PCB manufacturing experience preferred, but not required. CNC or related work experience preferred.
- Must be eligible to work on defense and satellite programs subject to ITAR Regulations. Therefore, candidates must be a U.S. Citizen or a U.S. Permanent Resident ('Green Card').
- Must pass background check and drug test.
- Ability to lift up to 50 lbs. and work in noisy environment (hearing protection provided).
- Ability to work in chemical environments.
- Ability to stand on feet for 8 hours.
- Excellent mathematical skills.
- Strong computer skills and mechanical aptitude.
- Use measuring tools such as pin-gauges and calipers.
- Read and understand blueprints.
Automatic Sprinkler Control Technician
Accepting online applications only. Apply online 24 hours a day, beginning November 9, 2018 through November 30, 2018 4:30 p.m.
EXAMPLES OF DUTIES
Under direction, maintains, repairs, replaces, reassembles, and adjusts hydraulic and electrical remote control valves, solid state control units and sprinkler heads; installs new controllers and remote control valves; accurately track labor and materials on work orders; conduct construction project inspections and plan review regarding irrigation systems; make daily inspections to ensure proper system programming and operations; operates metal detector, volt ohmmeter, cable fault locator, trencher and other turf equipment used in locating and repairing faulty pipes and wiring, maintains records of controller maintenance, parts, remote control valves and locations; reads schematics and blueprints for locating and installing automatic sprinkler systems; utilizes computer programs for the control and troubleshooting of a variety of centralized irrigation systems to include telemetry interface; may assist in the development of irrigation plans, budget proposals and purchase of new equipment; prepare cost estimates; implement system upgrades and modifications; may supervise staff and contractors in routine maintenance and installation of irrigation systems; performs other related duties as required.
REQUIREMENTS TO FILE
Candidates must meet the following:
Two years of paid, (full-time equivalent) recent experience repairing and maintaining irrigation systems including a wide variety of sprinkler heads and valves used in an automated sprinkler system.
Satisfactory completion of college level course work in automated irrigation control systems or a related field; or a certification from a recognized vocational, technical or service agency emphasizing landscape maintenance or irrigation control may be substituted for up to one year of the required experience (proof required).
Semester units: 24 units = 1 year
Quarter units: 36 units = 1 year
An Irrigation Technician Certification (CIT) will be required prior to passing probation (1,044 hours)
Additional Requirements to File:
The repair and maintenance of irrigation controllers.
Electric and hydraulic remote control valves.
Central control software.
Read schematics and blueprints.
Operate a variety of equipment including wire tracers, ohmmeters, and trenchers with attachments.
Lift and move objects weighing up to 50 pounds with or without reasonable accommodation.
Willingness to work weekends, evenings, and holidays as needed.
Proficiency with personal computers, including knowledge of computer applications such as Microsoft Office or other related software.
Proof of a valid Class C motor vehicle operator's license and a current DMV driving record must be submitted to the hiring department at time of selection.
Recent education in park administration, horticulture, landscape contracting, and irrigation. Experience with drought tolerant, native or adaptive plants. Knowledge of high efficiency irrigation systems (such as dripline) and centrally controlled irrigation systems. A current Irrigation Technician Certification (CIT) is highly desirable.
- Proof of required documents, such as transcripts or DD-214 Member 4 Form for Veteran's Credit, must be uploaded to the online application at time of filing. Candidates who possess degrees and/or transcripts from colleges or universities from outside of the United States must attach proof of educational equivalency at time of filing.
Application Packet............................................. Qualifying
This examination will be conducted using the continuous non-competitive procedure. All applicants meeting the minimum requirements to file will be placed on the eligible list, with those receiving Veteran's Credit first and then in the order in which applications were filed. Eligible lists may be established periodically.
If you have not received notification of the status of your application by December 14, 2018, please contact the Civil Service Department at (562) 570-6202.
In support of the City's Language Access Policy, bilingual skills (Spanish, Khmer and/or Tagalog) are desirable for some positions interacting with public.
This information is available in an alternative format by request at (562) 570-6202. If special accommodation is desired, please contact the Civil Service Department two (2) business days prior to the test at (562) 570-6202. For hearing impaired, call (562) 570-6638.
An Equal Opportunity Employer.
H58NN 19 KRR CSC 11/07/2018
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!