Electric Motor Assembler Job Description Sample
Electric Motor Mechanic
Electric Motor Mechanic - Wazee Electric
Your Career Begins at Timken
If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our associates make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion.
Repair various kinds of motors and other electro-mechanical equipment.
Read job cards to determine job status, work authorizations/limitations, estimate, description of problems, and/or expected serviceability.
Test electro-mechanical equipment to troubleshoot known or suspected problems using various methods.
Disassemble electro-mechanical equipment noting parts identification, configuration, and condition.
Clean electro-mechanical equipment assemblies as needed using various methods and steps, including, but not limited to: parts washers/steamers, caustic tanks, glass beaders, etc.
Measure for or note proper replacement parts. Correctly requisition needed items as approved by supervisor.
Replace or repair worn or defective mechanical or electro-mechanical assemblies, including, but not limited to: bearings, brushes, brush holders, motor leads, gears, seals, impellers, mechanical switches, brakes, clutches, clutch rotors, tachs, fans, and shields.
Re-test reassembled electro-mechanical equipment for proper output and operation.
Complete required paperwork for each job accurately and on a timely basis.
Operate specialized repair and testing equipment and other equipment as needed.
Observe all safety procedures and use proper protective gear (especially eye and ear protection).
Lift, tighten, adjust, and/or secure heavy objects in order to perform work duties.
Keep work area neat and clean.
Assist other mechanics and/or other shop personnel in skilled and/or non-skilled duties.
Perform other skilled or non-skilled duties as directed by management.
Preferred level of education: High School Diploma.
Basic mechanical aptitude, minimum of 5 years' experience in electro-mechanical field/electric motor repair field.
Ability to understand, perform, and retain various skill-related training and operational and safety procedures demonstrated by supervisor and other trainers.
Ability to work well with others in a team effort.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.
Timken Motor & Crane Services LLC fosters a drug-free work environment.
Nearest Major Market: Denver
Job Segment: Mechanic, Operations, Manufacturing
Electric Motor Mechanic Apprentice (902-773)
Job Summary: Learn to repair electric motors and equipment.
Essential Duties & Responsibilities
In this position you will learn the following:
Repair various kinds of electro-mechanical equipment.
Dismantle and test A.C. /D.C. motors and diagnose problems and remove defective parts.
Disassembles and removes armature, stator or rotor from housing.
Disassemble electro-mechanical equipment noting parts identification, configuration and condition.
Test electro-mechanical equipment to troubleshoot known or suspected problems using various methods.
Observes mechanical devices in operation and listens to their sounds to locate causes of trouble.
Examines bearings, shafts and other moving parts for excessive wear or defects.
Cleaning of electro-mechanical equipment assemblies as needed using various methods and steps, including but not limited to: parts washers/steamers, caustic tanks, glass beaders, etc.
Repairs or replaces defective parts.
Repairs include bearing replacement, assembly, testing and troubleshooting of problems.
Replace or repair worn or defective mechanical or electro-mechanical assemblies including but not limited to: bearings, brushes, brush holders, motor leads, gears, seals, impellers, mechanical switches, brakes, clutches, clutch rotors tachs, fans, end shields, etc.
Electrical theory and understanding of A.C. and D.C. motors.
Adjusts functional parts of devices and control instruments.
Installs special functional and structural parts in devices.
Assembles and tests motor for specified performance.
Read job cards to determine job status, work authorizations/limitations, estimate, description of problems and/or expected serviceability.
Measure for or note proper replacement parts. Correctly requisition needed items from storekeeper as approved by supervisor.
Operate specialized repair and testing equipment and other equipment as needed.Retest assembled electro-mechanical equipment for proper output and operation.
Complete required paperwork for each job accurately and on a timely basis.
Enter data into computer system.
Observe all safety procedures and policies and use proper protective equipment (especially eye, ear protection and steel toed shoes/boots, gloves etc.)
Keep work area clean and organized.
Report all injuries, near misses and accidents immediately to a supervisor.
All other duties as assigned.
Education, Skills and Experience
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience desired.
Ability to add, subtract, multiply and divide in all units of measurement using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percentage and to draw and interpret bar graphs.
Ability to read and comprehend simple instructions, short correspondence and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees in the organization.
Ability to apply common sense and understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
Mechanical and mathematical aptitude required.
Some experience as a Mechanic is preferred in the auto or maintenance industry.
Knowledge of Word Processing software.This job has no supervisory responsibilities.
Principal Electric Motor Engineer (50-52)
1.Evaluate different electric motor technologies for EMD compressor solutions including conventional low speed motor, high speed direct drive, and integrated machine.
2.Conduct theoretical and finite element electromagnetic analysis of electrical motors on torque, torque ripple, power, electric losses, short circuit transient response, shaft voltage under different loading conditions
3.Simulate electric motor control loops and evaluate the performance of different motor control approaches including V/F, V/F with encoder, open loop vector, and closed loop vector control.
4.Select electric motor component materials and motor protection method for high pressure, high temperature and sour gas environment
5.Design and conduct test to validate motor electrical, mechanical and thermal performance
6.Actively support the integration of electric motor subsystem into the EMD compressor package
BSEE with 10+ years experience with electric motors
MSEE with 7 years experience with electric motors
PHD with 5 years experience with electric motors
. Design, control, testing, and manufacturing experience with different types of electric motors
Familiar with analysis tools Maxwell, Matlab, and OrCAD Pspice
15 years experience with electric motors
Medium voltage high speed motor design, control and testing experience
Working Knowledge on motor structure and thermal dynamics
Electric Motor Winding Technician
We are Dreisilker Electric Motors Inc. (DEM), the premier provider of solutions for electric motors and motor control systems in North America for over 62 years, focusing on a comprehensive range of efficient and high quality products and services.
We currently have open positions for experienced Electric Motor Rewinders for our Glen Ellyn, IL repair shop. We are looking for experienced quality conscious candidates.
The experienced Winding Technician will have working knowledge of electric motor repair shop services. The winder will prepare stators and/or armatures for AC/DC electric motors and special equipment by performing the following duties.
Essential Job Duties and Skills Required:
Will be required to learn and perform our motor stripping process
Inspection and disassembly may be required to determine cause of failure
Perform diagnostic electrical testing
Confirms all winding data is current and accurate and current
Documents best practices
Reviews wiring diagrams and work orders to determine winding specifications
Cuts, shapes, size insulating materials and wire cables or connections.
Cleaning, filing and deburring prior windings
Monitors wire counters, machinery and wiring equipment to adhere to our quality standards and processes
May require lifting up to 50 pounds with proper equipment and lifting technique
Ability to read schematics and diagrams as well as read, write and comprehend the English language
Must have the ability to read, write and apply mathematic calculations using metrics, U.S. standard units of meausre; addition, multiplication, division, distance and ruler measurements
Fork lift and crane experience
Various other duties as required
Note: This job posting in not designed to cover or contain a comprehensive list of activities and duties required for this role. Must be eligible to work in the U.S.
We offer a competitive wage and comprehensive benefits package, which includes; medical, dental, vision, short and long term disability, life insurance, accident and critical care coverage and 401(k) options. We also offer PTO (paid time off) and 10 paid holidays.
We are an Equal Opportunity Employer.
Electric Motor Control Engineer
FCA is currently seeking an Electric Motor Control Engineer for the Electrified Powertrain Motor Integration and Control Development Group. This group will support FCA's plan to achieve world-class balance of fuel economy, emissions, and drive quality. The Engineer must be a strong systems-focused team player with interdisciplinary experience/expertise, and willing to work in a fast paced environment.
Responsibilities include but are not limited to:
Advancing the state-of-the-art in electrified vehicle technology through the use of innovative methods, tools, and processes
Establishing best practices for IPM/induction motor related analysis, controls, and testing
Providing subject matter expertise and mentoring
Improving communication and knowledge-sharing within the organization
Providing feedback to architecture and advanced groups for hybrid powertrain, battery, and vehicle systems development
Bachelor's degree in Electrical, Mechanical, Aero or equivalent Engineering degree
In-depth understanding in theory of AC induction/PM motors, and their controls for automotive applications
Minimum of 2 years' experience or advanced relevant degree in PM/induction motor control algorithm and software development
Experience with modeling, simulation, development, testing, calibration and/or validation
Masters or PhD in Electrical, Mechanical, or Computer Engineering, or related Engineering field from an ABET accredited university
Specialization in classical/modern control disciplines with vehicle application
Expertise in electric motor calibration, dynamometer testing, parameter measurement and system identification
Demonstrated critical thinking and technical problem solving ability
Expertise in Embedded software development tools and processes
Hardware-in-the-Loop (HIL) ,
Static code analysis
Model-based Code Generation
Experience with Freescale/TriCore/DSP 32-bit processors
Understanding of electrified vehicle fundamentals
Outstanding interpersonal skills, self-motivated and able to work independently
Electric Motor Sales Manager (Carlsbad, CA)
SMAC has developed a high torque DC servomotor with an output estimated to be triple that of (same size, current and voltage) the leading motor makers.
Electric Motor Pump Mechanic
You will be perfect for this role if:
- You want to work in a brand new facility with state of the art tools and machinery.
- You want to work for an up and coming organization with year on year double digit growth.
- you want to be financially rewarded for your hard work.
Responsibilities for the role of Electric Pump Motor Mechanic:
- Electric Motor/Pump testing
- Well versed in dismantling, balancing, troubleshooting electric motors and generators both AC and DC.
- Familiar with Surge Testing, Hipot Testing, use of Megger, drop voltage tests, AC/DC Theory.
- AC and DC Electric Motor Connections experience.
- Proper filing of paperwork is required.
- Experience dismantling and assembling submersible and centrifugal pumps.
Requirements for the role of Electric Pump Motor Mechanic:
- 4+ years of AC/DC Pump experience
- Disassembly and Assembly of electric motors
- Flexible to meet the demands of customers.
- CandIdates that are looking for a long-term career, with growth opportunities.
Assembler 1- Motor Build Stack (Temp)
Teledyne Relays' mission, vision, and value statements have never really changed in principle since 1963. Dedication to every employee and client's success; Innovation that matters - for our company and for the world; Trust and personal responsibility in all relationships – Teledyne Relays is EveryWhereYouLook!
We are currently looking for a temporary full-time entry level Assembler (Motor Build-Stack) to our Motor Stack department to work with motor, build, shim weld and adjust components.
Position Summary and Responsibilities
Motor department operators are responsible for duties that include motor build, shim weld, and adjust.
Visual acuity, manual dexterity and successful completion of assembly is required.
Hand tools, fixtures, microscope, peen machine and latex gloves will be used to perform essential functions.
Works on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations.
Normally receives no instruction on routine work, general instructions on new assignments. Previous production experience in small part assembly.
Reading, writing and oral communications skills are required.
Basic computer skills for data entry for inventory control, assignment tracking, and labor charging, performed daily.
Must be willing to cross train in to other areas of manufacturing.
Completion of High School diploma or equivalent, preferred.
Basic computer skills for data entry for inventory control, assignment tracking and labor charging must be performed daily
Must have good oral and written communication skills.
Good eye-hand coordination working under a microscope, and good dexterity to assemble small parts, use small tools (shims, tweezers)
Ability to read and understand assembly drawings, procedures, and specifications.
Must be able to work in a team environment as well as independently.
PHYSICAL DEMANDS: Will occasionally stand/walk/climb or balance/stoop, bend, kneel, crawl/push or pull/talk or hear; carry or lift up to 15 lbs.; frequently will need to sit, reach with hands or arms to handle parts/equipment
VISIONS REQUIREMENTS: be able to distinguish and identify colors, be able use close vision (20 inches plus), have 3D depth perception (ability to judge distances and spatial relationships) with the ability to adjust focus as needed
WORK ENVIRONMENT: a clean room environment - no make-up allowed and closed toe shoes are required. Will occasionally work near moving mechanical parts and have contact with moving mechanical equipment. Noise level is moderate (light traffic)
Candidate must be a US person
NOTE: Relocation is not offered for any of the positions listed above.
Teledyne Reynolds, Inc. dba Teledyne Relays may, at its discretion, modify or add further duties not currently listed in this general job description.
How to Apply:
External qualified candidates go to the Teledyne Career Center at: http://www.teledynecareers.com on the Job Search page, requisition#2018-6420, Assembler 1 - Motor Build Stack (temp), location: Hawthorne, CA.
TELEDYNE IS AN EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation & gender identity, national origin, disability including pregnancy, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. EEO is the law.
If you need assistance or an accommodation while seeking employment, please inform Human Resources at (323) 777-0077. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will receive a response.
Visit us at www.teledynerelays.com for more information.
Requisition Post Information* : Posted Date3/19/2018
Assembler - Electric Products (1St/2Nd Shift)
Division: Columbus McKinnon Corporation
Position: Assembler-Electric Products – may be 1st Shift or 2nd Shift(candidates should have flexibility to work 1st or 2nd shift as needed)
Reports to: Assembly Supervisor
SUMMARY: This classification requires the complete assembly, installation and test of hoists, parts and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. Duties will include assignment as needed in the electric, manual, and paint classification in the assembly department as needed.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
Aligns components, and bolts, screws, or rivets them together.
Installs moving parts, such as shafts, levers, or bearings, and works them to test free movement.
Aligns and meshes gears in gearbox to assemble system of gears.
Tests or assists in testing operation of completed product.
Sub-assemblies will include, but not be limited to:transmissions, brakes, panel plates, and final assemblies.
Works from blueprints, production illustrations, process sheets, production test procedures, written and oral instructions where assembly methods and procedures are established.
This classification also requires team members to rotate into all areas of classification on a regular basis.
Transports specified parts from storage to work area manually or by using overhead crane.
Brushes lubricant on moving parts and fits parts together on bench, following blueprints.
Inserts shims between parts to realign or level parts and verifies alignment and clearance of parts with micrometers, scale, and gauges.
Bolts, screws, and rivets parts together.
Operates hydraulic press to force bearings into sleeves and flatten rivets.
Connects electric wires to terminals of subassembly.
Get work order, transmission assembly parts, assemble transmission, load transmission into fixture, and assemble motor.
Build up hoist sub-assemblers, brakes, limit switch, PB station, Power cord and assemble to hoist
Move hoist to test station perform high pot test, install chain, chain stop components, get lower switch, get high limit switch, position hoist for load test
Perform load test, connect to station tester and complete station test, scan workorder and input clock number / labor reporting.Stat to pair hoist
Make foams for packaging pack hoist, places box on pallet, scan work orders and completes make transaction.
QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience.
LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and distance vision.
WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The noise level in the work environment is usually
Orlando Company seeks Full -Time Electrical Installers
The Reserves Network is a full service staffing firm specializing in light industrial, manufacturing, and office placement. Our client is a large manufacturer in Central Florida. We are seeking experienced Electrical Installers, someone who is experienced, eager to work and a can work at a fast pace.
Install various electrical parts
Responsible for Safety
Installing interior lighting and all interior components and hardware
Install exterior components
Experienced with 12v and 110/208 a plus
High School Diploma or GED
Basic Math abilities
Experienced in wiring troubleshooting
Able to use Tape Measure and Hand Tools
Must pass client pre-screening process
1st Shift, Mon Thursday, 6am 430pm
$14.00-$15 per hour, DOE
Temp to Hire
Great benefits when hired by the client
If interested, please send your resume to
And then call us at
Customer is interviewing immediately!
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!