Electrical Control Assembler Job Description Sample
Quality Control / Modifications Assembler
Combi Packaging has an immediate need for a Quality Control / Modifications Assembler to assemble, modify, and perform quality control checks on case sealing equipment for packaging applications.
Responsibilities and Duties
· Quality control of equipment
· Mechanical assembly and wiring
· Documentation and tracking of components for individual projects per the BOMs
· Collaborate with engineering/QC lead to troubleshoot any design issues during assembly or defects found during quality checks
· Tow motor operator
Qualifications and Skills
· High school diploma or GED required; additional schooling or training in electrical or mechanical fields is preferred (Mechanical or Electrical Engineering Technology, Equipment or Automotive Mechanical, etc.)
· Ability to read and understand machinery manuals, blueprints, engineering drawings, and schematics
· Minimum 2 years of relevant mechanical and electrical experience preferred
Learn and adhere to all safety policies and practices to avoid safety incidents
Learn and adhere to all manufacturing policies and practices to ensure consistent production
Ensure quality by following standard work/process instructions and identifying any potential risks to product quality
Install, run, and terminate conduit by following standard work/process instructions
Bend, run, and install conduit (EMT, Rigid, Wire way, and Cable tray)
Install wiring by following standard work/process instructions (NEC Manual)
Ensure that work areas remain clean and well organized
Lifting up to 50 lbs. occasionally
Frequently working from a ladder, and climbing up and down ladders.
Constantly working overhead
Constantly working in cramped quarters
Will be required to perform other duties as requested, directed or assigned
Education and Experience:
Minimum of high school diploma or GED and 1 year of relevant manufacturing experience or equivalent combination of education and relevant manufacturing experience
Must have a basic command of the English language, both written and verbal
Job Knowledge, Skills and Abilities:
Ability to perform basic mathematical calculations
Knowledge of air, hand, and power tools
Basic mechanical knowledge
Basic electrical theory
Knowledge of electrical code requirements and wiring practices (NEC Manual)
Ability to read drawings or blue prints
Ability to read a tape measure
Ability to bend conduit
If you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use the careers site as a result of your disability. To request an accommodation, send an email to email@example.com or call 713-378-2685 and let us know the nature of your request and provide your contact information.
Please do not direct any other general employment related questions to this email and/or phone number. Only inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address and/or phone number.
An Equal Opportunity Employer/Vet/Disability
Electrical Control Panel Assembler
Lone Star Corporation is growing and we are looking to hire an additional Electrical Control Panel Assembler!
We are looking for a highly motivated individual who is seeking a long-term, permanent opportunity to become a valuable part of our team.
Assemble electrical control panels. Complete point to point to point wiring, and install a wide variety of electronic components, such as PLC's, relays, lights, switches, etc. Work from schematics, bills of material, hand written notes and written and verbal instructions. May have to determine the method and sequence of assembly operations. Utilize small hand tools such as wire strippers, crimpers, wrenches, screwdrivers, pliers and soldering irons.
Work with minimal supervision once work assignments are given and explained. Ask questions to obtain sufficient instruction to perform assigned tasks.
Read drawings, blueprints, electrical schematics and wiring diagrams. Use good judgment when dimensions or tolerances seem inconsistent or unworkable. Ask engineers or supervisors to clarify. Mark up drawings and bills of material to document the "as built" final product.
Perform necessary hand operations such as deburring, drilling, grinding & sawing. Operate lift trucks and hand pallet jacks to move material within plant. Keep simple records.
Work for the good of the company, accept instruction from supervisors. Maintain a positive attitude and be a team player!!
Knowledge of instruments, such as pressure transmitters, flow meters, etc. would be beneficial, but not required.
Job Type: Full-time
- schematic reading: 1 year
- control panel assembly: 1 year
Required work authorization:
- United States
Benefits include medical, vision and dental insurance, 401K retirement savings plan, company paid life insurance and paid time off. Our company maintains a strong policy of equal employment opportunity for all associates. We hire, train, promote and compensate associates on the basis of personal and professional competence and potential for advancement without regard for race, color, religion, sex, national origin, age, marital status, disability or citizenship, as well as other classifications protected by applicable federal, state or local laws.
About Lone Star Corporation
Lone Star prides itself on the reputation that it has built providing instrumentation and electrical installation and maintenance for a wide variety of heavy industrial markets. Our 100% commitment to customer satisfaction ensures that our clients have a competitive advantage on all of their electrical projects. Our goal is to improve value without sacrificing quality, reliability or excellent service. Quality work demands quality people so apply today!
Electrical Assembler 1
Teledyne Paradise Datacom is focused on the design, manufacturing and sale of satellite modems, solid state power amplifiers (SSPA), low noise amplifiers (LNA), block up converters (BUC) and associated redundancy subsystems. Paradise Datacom has delivered products and subsystems for use in satellite communications systems to an extensive list of customers located around the world.
Position Summary and Responsibilities
Reflow of printed circuit boards (PCB) to metal housings and carriers. Hand soldering of small electronic components to circuit card assemblies (CCAs). Preparation and soldering/crimping of multi-stranded small gauge wire to connectors and (PCB) pads.
Follows computer based production drawings and verbal instructions with minimum supervision. Understands and applies established acceptable workmanship practices to all facets of electronic assembly.
After training and probationary period work is required to meet:IPC-7711/IPC-7721 IPC-A-610 J-STD-001 Maintain neat work area compliant with Electrostatic (ESD) control program, ANSI/ESD S20.20 Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding. Performs work (soldering and general inspection) under microscope.
Perform other duties as assigned. Computer knowledge adequate to use web based tools to access production documentation.
High School Diploma or equivalent
Strong attention to detail while maintaining steady workflow.
Will train motivated individual with strong work ethic to perform indicated job functions.
Comprehensive knowledge of electronics manufacturing terminology, tools and materials applicable to crimp terminations (wire and lead preparation), mechanical fastening hardware (screws, bolts, etc., press fits), soldering (solder appearance, rejection criteria), epoxy (preparation, application).
While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must frequently lift and or move up to 25 pounds and occasionally life and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, toxic or caustic chemicals, and hot tools/surfaces. The noise level in the work environment is usually moderate. Work may require overtime of 10 hour days or occasional weekend work.
Citizenship RequirementsDue to the type of work at the facility and certain access restrictions, successful applicants must be a "U.S. Person" (US citizens, US nationals, lawful permanent residents, asylees or refugees). Teledyne is an Affirmative Action/Equal Opportunity EmployerAll qualified applicants will receive consideration for employment without regard to race,color,religion,religious creed,gender,sexual orientation,gender identity,gender expression,transgender,pregnancy,marital status,national origin,ancestry,citizenship status,age,disability,protected Veteran Status,genetics or any other characteristic protected by applicable federal,state,or local law.
If you need assistance or an accommodation while seeking employment,please email firstname.lastname@example.org or call (805)373-4545. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will receive a response.
The primary responsibilities of the electricial assembler will be to install and repair wiring, electrical fixtures, apparatus and control equipment by performing the following duties:
- Possess knowledge of all types of electrical conduit so as to measure, cut, bend, tread, assemble and install
- Familiarity with 120/240 single phase, 120/240V delta 3 phase, 120/208V 3 phase, and 277/480V 3 phase systems
- Splice wires and/or terminate wires to lighting, power and control equipment
- Connect power cables to equipment
- Possess a working knowledge of the NEC.
- One to two years of experience and/or training, or an equivalent combination of education and experience in the construction trade
- Willing to work overtime, as needed
- No travel required!
Why work with us?
- Medical, Dental, Vision and Short Term Disability insurance
- Company paid Life and Long Term Disability insurance
- Paid Vacation starting after 120 days
- 8 paid Holidays, plus a bonus holiday after 5 years of service
- Retirement Plan with Company Match
- Tuition Reimbursement and Continuing Education Assistance
- Advancement Opportunities
- Potential for Annual Bonus
- Learn more about us at www.trachteusa.com
Electrical Assembly Technician (Grade13 -Electronics Assembler A)
Northrop Grumman Mission Systems is seeking an Electrical Assembly Technician for our Annapolis office.
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
Makes continuity checks on work in process and completed.
May conduct quality inspections on processing line in accordance with quality specifications.
May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
High School Diploma or GED and 4 years of additional relevant education and/or job-related experience
Ability to obtain and maintain a Secret clearance
2 years of experience in electronic assembly
Current Secret clearance
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO. U.S. Citizenship is required for most positions.
Electrical Product Assembler
This position is hiring for 3rd shift.
Employee must develop skills through training in Tank Equipment, Wiring, Conduit, Drop In and Encasement. S/he may be responsible to perform repairs on units, parts, or incoming materials. S/he may be asked to train new associates.
PRINCIPLE DUTIES AND RESPONSIBILITIES
Receive assignments and instructions from supervisor, both verbal and written, and obtain shop documents and prints needed.
Read and understand schedule and work flow requirements.
Get materials from storage or queuing areas, and complete kits with hardware and parts as needed.
Be able to read, understand and follow guidelines set forth by E.I.'s, M.P.'s, O.I.C.'s and drawings when performing assigned work.
Do work and keep records in accordance with ISO 9000 registration requirements.
Assemble components in accordance with established standards.
Inspect assemblies, product, processes, and materials for conformance to design criteria, applicable specifications, and inspection procedures.
May work in Med Power, Large Power or EHV product lines.
To perform fabrication repairs and machine maintenance.
Weld components with appropriate techniques and repair if defective
Keep tools, equipment and work area clean and orderly. Visually check equipment for normal operation. Verify lifts and cranes before use (crane cable & limit switches).
Perform minor equipment repairs and machine maintenance.
Use SFLC system accurately. Punch in and out. Make and end of shift review of the days' time, and make the necessary corrections such as closing gaps, or changing NCRs & DMs to the correct indirect accounts.
Write maintenance work orders.
Have the ability to look up NC's
Perform work in other departments as needed
Follow all safety procedures and policies of the company
Train peers as required to support team production requirements.
Investigate potential and actual non-conformances, and recommend corrective action.
Perform other work as required.
KNOWLEDGE, SKILLS & ABILITIES
Portable scaffold and steps, ladders, radial and band saw, vacuum cleaner, hydraulic jacks, threading machine, hi-press crimpers, grinder, stud gun, hand drill, pneumatic wrenches, mallet, sledge, pry bars, blocks, wire stripper, hand crimper, overhead jib crane, chains, slings, vacuum pumps, forklift truck, air bearings. Various machine operations such as: shear, punch, lathe, grinder, radial drill and others. Submerged Arc (SAW), Stick Welding (SMAW), MIG Welding (GMAW), Oxyacetylene Torches, Plasma Cutting, Air Arc Gouging, Brazing, Stud Welding, and TIG (GTAW) equipment.
Materials used in this position include tank, cover, current transformers, tap changers, gear assemblies, oil gauges, pressure gauge, cabinets, housings, bushings, operating mechanisms, finished transformers, flanges, lightning arrestors, wood, steel rod, nitrogen and others. Breaker stands, breaker poles, breaker C.T.'s, galvanized steel beams, & SF6 gas.
S/he works under general supervision. Care is required to prevent damage to components or unit.
Often works at heights up to 15' or more and occasionally work at heights up to 30' or more. Work varies from working at ground level to working in, on top of, and around the sides of the transformer unit.
Operations require mental and visual concentration to ensure compliance with engineering and quality specifications.
Position requires hand and eye coordination to make adequate welds meeting various welding specifications for in plant certification (if welding). S/he must have ability to work in confined spaces. Must have the ability to access and work in confined spaces, which includes 18"-24" manhole accesses. Working conditions are generally good.
The above description covers the principle functions of the job. It is not intended to be a complete listing of all the miscellaneous incidental or substantially similar duties which may be assigned during normal or emergency operations.
EDUCATION AND EXPERIENCE
Required Education / Experience
High School Diploma or equivalent
SPX Corporation is a supplier of highly engineered products and technologies, holding leadership positions in the HVAC, detection and measurement, and engineered solutions markets. Based in Charlotte, North Carolina, SPX Corporation had approximately $1.4 billion in annual revenue in 2017 and more than 5,000 employees in 14 countries.
SPX Corporation is listed on the New York Stock Exchange under the ticker symbol "SPXC. For more information, please visit www.spx.com.
SPX is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.
Thank you for your interest in our company.
Shuttleworth, based in Huntington, IN, provides integrated product handling solutions using innovative technology and experienced problem-solving specialists to increase line efficiency, maximize profitability and minimize risk. Shuttleworth serves a variety of markets including automotive, consumer, electronics, food, health & beauty, industrial, medical, paper conversion, paper printing & binding, pharmaceutical and solar energy. Shuttleworth is a division of Pro Mach, a leading provider of integrated packaging and processing solutions for over 20,000 customers worldwide. Through multiple brands, Pro Mach provides product packaging and processing equipment, PMMI certified training, installation, parts, and service for primary and secondary packaging, flexible packaging, end-of-line packaging, and identification and tracking. For more information on Pro Mach's brands visit www.ProMachBrands.com.
We are currently seeking an Electrical Assembly Technician
Ability to read Electrical Drawings – This involves a thorough understanding of electricity, both low voltage (PLC inputs, outputs) and high-voltage, various symbols and circuitry and power. Must understand safe practices when dealing with electricity.
Build Electrical Control Panels – this involves being able to read and understand Electrical Engineering drawing sets, being able to understand dimensions, and knowledge of electricity and safe practices when working on high-voltage systems. Previous work experience in dealing with AC motors, motor starters, disconnects and PLC I/O wiring is required.
Terminate Panels – terminate all low and high-voltage wires back to the main panel(s) and/or junction boxes.
Install field Wiring – this includes mounting of various sensor types (proximity sensors, photo eye sensors, laser through beam sensors, reed switches), industrial camera and barcode readers, light towers, safety circuits.
System Debug – Work diligently to support lead Mechanical and Controls Engineers on "dialing in" the system to achieve desired performance level.
Troubleshoot Systems – This involves using various tools and instruments to find and fix electrical problems.
Redline Electrical Prints – This involves catching and documenting mistakes in electrical drawings sets, wiring the system correctly and then documenting the mistakes so that the Engineers can correct the final drawing set.
Assist in Mechanical Assembly – Assist in Mechanical Assembly as needed.
Ability to read blueprints and electrical schematics
Must have a strong understanding of safe electrical practices and have the ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.
Must be able to read and interpret complete Electrical Engineering Drawing sets, both high and low-voltage (PLC I/O, Ethernet and Safety Circuits).
Must be able to read and interpret bill of materials (BOMs).
Must be able to use Microsoft Word or some other word editor.
Must possess and understand ownership and working on the job until the job is finished.
Must possess strong interpersonal and communication skills.
Must possess strong organizational skills and be able to take direction well.
Must possess a winning, team-player mentality.
Ability to define problems, collect data, and draw valid conclusions.
Must have knowledge of how to operate a calculator and computer.
Must know how to use basic hand tools – cordless drill, pneumatic tools, socket wrenches, open-end and box-end wrenches and screw drivers.
Must know how to use basic hand tools - cordless drill; pneumatic tools, socket set, wrenches, open end and box end, screw drivers –regular and Phillips and pliers – regular and channel lock
Salary is only a part of a well-developed compensation program. As a Pro Mach employee, you receive more than just a paycheck. Total compensation includes your pay (base salary), very comprehensive medical/dental programs as well as life insurance, a generous paid time off program, a retirement savings plan with a company match and a wellness program. There is no waiting period for benefits – you are eligible on your first day of employment.
Pro Mach is an Equal Opportunity Employer. Pro Mach complies with all states mandating the use of E-Verify to verify employment eligibility of new hires to work in the United States. Pro Mach is a drug-free workplace.
Electrical Control System Engineer 2/3 (Engineer 2/3)
Vacancy Name: IRC71209
Job Title Electrical Control System Engineer 2/3 (Engineer 2/3)
Location Los Alamos, NM, US
Organization Name ES-EPD/ENGINEERING PROJECT DELIVERY
What You Will Do
The successful candidate will be expected to perform the following duties of this position, but are not necessarily limited to:
Work with a team of multidisciplinary engineers responsible for LANL facility and site design/ analysis work & review of LANL construction projects to ensure that the designs comply with Federal, State and LANL codes & standards.
Responsible for Instrumentation and Controls (I & C) engineering performance and oversight of design/analysis calculations, drawings & specifications, and system tests for higher complexity projects.
Develop design details, equipment data sheets, calculations, engineering plans and specifications; that incorporate the applicable design requirements including nuclear safety requirements.
Interface and coordinate with other engineering disciplines and the customer during the development of project deliverables.
Support the associated safety analyses and hazards evaluations.
Implement the LANL Conduct of Engineering (COE) Program.
What You Need
Minimum Job Requirements:
This position will be filled at either the Electrical Engineer (Control System Engineer) 2 or 3 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.
Electrical Control System Engineer 2:
Demonstrated broad based Instrumentation & Controls (I&C) experience with projects involving new facilities, facility modifications, & safety instrumented systems.
Experience with delivery construction documents.
Experience I&C design/analyses in accordance with the International Building Code (IBC), National Electrical Code (NEC), Institute of Electrical and Electronic Engineers (IEEE) and Instrumentation Society of America (ISA), International Electro-technical Commission (IEC), is required.
Knowledge/Understanding of codes & standards for I&C engineering.
Excellent communication skills (both verbal and written).
Demonstrated leadership, quality, and safety values, to internal and external customers (i.e. stakeholders, vendors, construction companies, and other subcontractors).
Demonstrated experience in control system analyses in accordance with IBC and IEBC
BS degree in electrical engineering from an ABETaccredited university.
Engineering Intern Certification.
Minimum of 5 years of related experience.
Additional Job Requirements for the Electrical Control System Engineer 3:
Demonstrated proficiency regarding I&C engineering, and design of new facilities and facility modifications.
Familiarity of DOE standards applicable to facility design, operation, and maintenance.
Demonstrated proficiency with the national codes and standards for I&C engineering.
Ability to perform work with minimal supervision.
Significant technical knowledge in non-reactor nuclear facility I&C design.
Minimum of 8 years of related experience.
Demonstrated knowledge of DOE standards applicable to electrical design implementation
Professional Engineering certification.
Familiarity with LANL engineering processes and procedures.
Clearance: Q (Position will be cleared to this level). Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements
for access to classified matter.
Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information.
New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing.
Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.
Internal Applicants: Please refer to Laboratory policy P701 for applicant eligibility.
Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regards to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to email@example.com or call 1-505-665-4444 option 1.
Where You Will Work
Located in northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. LANL enhances national security by ensuring the safety and reliability of the U.S. nuclear stockpile, developing technologies to reduce threats from weapons of mass destruction, and solving problems related to energy, environment, infrastructure, health, and global security concerns.
Los Alamos National Laboratory (LANL) is primarily responsible for monitoring the safety and reliability of the U.S. nuclear stockpile and conducting research into new defense programs. It is a center for research in a wide range of scientific disciplines, including space exploration, geophysics, renewable energy, supercomputing, medicine, and nanotechnology.
Engineering Services (ES) Division of LANL develops, maintains, and applies a diverse set of engineering capabilities to provide innovative engineering solutions that enable the Laboratory's scientific and national security mission. The Electrical Engineer position within ES Division is assigned to the Engineering Project Delivery (ES-EPD) Group responsible for design services and the Conduct of Engineering (CoE) program implementation at LANL.
Appointment Type Regular
Contact Name Pacheco, Barbara Gonzales
Req ID: IRC71209
Electrical Control Technician
The Electrical Control Technician will Install, maintain, test, startup, and adjust a wide variety of site electrical, electronic, electro-pneumatic, and electro-mechanical instrumentation and control systems/equipment. Principal site-specific electrical and controls (E&C) systems include, but are not limited to, those associated with the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. In addition, provide technical support as required to the E&C Engineer in the performance of his/her duties.
MAJOR DUTIES AND RESPONSIBILITIES:
Read, interpret and troubleshoot site E&C system deficiencies using electrical schematics, loop diagrams, control logics, mechanical drawings and piping & instrument diagrams (P&IDs). Troubleshoot indiscriminately both the mechanical and electrical sides of systems. Maintain as-built logics, control loop diagrams, and documentation for all assigned systems.
Install, program, troubleshoot, calibrate, tune, perform preventive and predictive maintenance (condition monitoring), replace and repair all assigned E&C systems and all associated electrical, electronic, electro-pneumatic, and electro-mechanical components, including instrumentation and end-elements.
Troubleshoot hardware and software problems; perform simple programming, data base changes, and alarm log reviews; perform and maintain system back-ups and history database files; develop and install graphics to enhance operation and maintenance; and perform miscellaneous administrative functions as directed by E&C Engineer on site's microprocessor-based central control systems.
Program and troubleshoot ladder logic, both in hard-wired relays and PLC, for control systems.
Adjust control system parameters as required and/or directed by E&C Engineer.
Perform startup and checkout of newly installed E&C systems prior to operations turnover.
Perform in-house training of personnel on operation of site's microprocessor-based central control systems.
Direct repair personnel as assigned.
Perform all other duties as assigned.
Keywords: Journeyman Electrician, Electrical, CFC, Facilities, Facility Maintenance, Control Tech
High School Diploma / GED
Able to obtain and maintain a Top Secret Security Clearance.
Journeyman Electrical License.
Universal CFC refrigerant handling certification.
Ability to comprehend written and oral instructions.
A willingness to work rotational shift if necessary, including days, evenings and nights, as well as, overtime, weekends, and holidays.
Working experience in electrical, industrial electronics, and electro-pneumatics.
Ability to read, interpret, and troubleshoot using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&ID's).
Five years working experience with 480VAC minimum.
Working knowledge of PLC programming. Must be able to read, interpret, and troubleshoot ladder logic from computer terminal.
Understanding of and fluent with computer language, NT-based system.
Knowledgeable in direct digital control (DDC) and other forms of electronic controls.
Hands-on experience in calibration and maintenance of electronic and / or electro-pneumatic control system equipment.
Hands-on experience in repair and troubleshooting of motor control centers and variable frequency drives (VFD's).
Hands-on experience or potential to quickly learn operating and control systems for principal site-specific systems including, but not limited to, the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment.
Two years experience in maintenance and repair on commercial/industrial/residential building equipment to include, but not limited to: cooling towers, pumps, heat exchangers.
Three years working experience with high voltage up to 15,000VAC, preferred.
Ability to write correspondence.
Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Understanding of Distributed Control Systems (DCS), preferred.
Understanding of HVAC building management systems (BMS), preferred.
Certified and proficient in UNIX-based computer systems to include hands-on and / or classroom experience, preferred.
Familiarity with Honeywell & Siemens controls
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!