Etcher Electrolytic Job Description Sample
Checks BandW film against order and glass to ensure fit and usability.. Apply BandW film to resist film in dark room. Expose film.
Rinse and tack to back and pressure wash. After drying, check film again. Applies resist film to glass.
Covers balance of glass to protect areas not to be etched. Etch using etching equipment. Removes film, after soaking and softening film.If using laser, reviews file in computer.
Tests film on sample glass or cardboard. Attaches vinyl to glass. Using laser equipment, etches pattern on glass.
Checks glass piece again. Covers balance of glass to protect areas not to be etched. After etching, put glass in cooker to loosen vinyl, rinsing it off.Handles, stores, and transports product in cautious manner to avoid scratches, breakage, surface imperfections and damage.Reads and understands work order, drawing(s) and customer order prior to starting work.
Contacts Supervisor if there are any questions.Inspect materials prior to starting work. This includes checking piece count, finish, sizing, copy, personalization, color and/or any potential quality issues. Rejects or contact Supervisor if quality issues are present.
Records or logs work start and stop times and records or logs accurate amount of materials used in process. One year or more of continuous experience in Manufacturing, having a position that requires a great deal of attention to detail.Must have computer skills and experience operating computer driven equipment.Use of Visual or ERP software, Microsoft Office and Corel Draw is preferred.Understanding of various metals and proper cutting tools required in engraving.An art background is beneficial.Ability to work with little supervision.Desire to produce a quality product while maintaining reasonable productivity.Must possess a strong work ethic.Must have prior manufacturing experience.Performs other duties as assigned and necessary to maintain departmental production and a full work schedule
RS Engraver Sr (Machinist / Placard)
[[cusuniqSkills]] Education and Experience
High School graduate/GED.
Basic mechanical and artistic aptitude. Strong math skills are required. Four (4) years engraving experience.
Previous aircraft experience preferred. Must be able to read and interpret blue prints and engineering drawings that are specific to engraving. Position Purpose:
Under minimal supervision, the Engraver Senior produces various types of placards and legends for installation in aircraft or for shipment to customers. Principal Duties and
Essential Functions: 1.
Refurbishes or modifies existing placards and legends for re-installation in aircraft. 2. Provides customized placards and labels for in-house use. 3. Produces, modifies, repairs or refurbishes placards, adhesive labels, and engraving services. 4.
Establishes priorities based on delivery schedules. 5. Works with engineering to implement requirements and changes that are acceptable to the company, customers and the FAA. Additional Functions: 1.
Designs and builds jigs for securing materials to be engraved. 2. Performs other duties as assigned. Other
Must be able to lift, carry, move, push, pull and install 30-50 lbs, unassisted. 2. Must be able to wear all required safety equipment. Must be able to walk, sit, stand, climb, crawl, twist, bend, and lie on creeper or work ability to gain entry, work in confined areas and work from elevated platforms (reached via ladder). 3.
Must be able to work overtime and weekends as required to meet business needs. Must be flexible on shift work, i.e. rotating from all shifts. 4. Possess personal skills including creativity, problem solving ability, mechanical inclination, organization, initiative, and the ability to work with people and to meet demanding schedules.
Languages Required (in addition to English): [[cusLanguage]] Additional Information Requisition Number: [[id]] Category: [[customString3]] Percentage of Travel: [[custravRequired]] Shift: [[cusShift]] Employment Type: [[filter2]] Posting End Date: [[custextPostEndDate]] Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2014 Gulfstream Aerospace Corporation. All Rights Reserved.
A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft
The Zachary site is located about 15 miles north of Baton Rouge. The site is certified under ISO9001:2008 management system. The incumbent in this position will be responsible for the safe and efficient operation of the Electrolyte / HPU.
This includes operating functions in the Electrolyte / HPU – completing operational objectives. Also provides trouble shooting support within the Electrolyte / HPU team, facilitating general area processing requirements such as, but not limited to, loading, unloading, verifying levels, flows and ensuring continuity of operations and processes such as loading and unloading reactors and dryers, filling vessels and drums, safely operating fork trucks, loading and unloading railcars / trucks / storage tanks, evaluating material against specifications, cleaning vessels, as well as providing for requirements to special operations in the unit operations.
• Maintain adherence to company policies, safety standards, and good housekeeping practices. • Maintain environmental compliance in the Electrolyte / HPU. • Issue safe work permits and Lock out and tag out equipment. • Comply and Complete all required CBT’s on a timely basis. • Participate in the daily functions for the Electrolyte / HPU Unit. • Ensure that orders are completed on time and in full to meet the specified monthly goal. • Ensure that first pass acceptance for Electrolyte / HPU Unit meets specified monthly goal. • Provide for proper operating conditions and process alignments for on-spec product. • Participate in the investigation and determination of root cause and corrective actions for EHS incidents, and product quality issues. • Development and review of operational procedures.
Participate in PHA’s as required. • Participate in cross training and learn Electrolyte / HPU unit Operations. • Learn, and apply knowledge to new or existing processing projects as scheduled (this will typically be concurrent with normal operations). • Monitor process components for effective operations and make necessary adjustments. • Load, unload and transfer materials, document transfers, process samples for analysis. • Make continuous checks on processing equipment for safe, effective, proper performance. • Relieve and or rotate activities with other area operator to further improve capabilities. • Maintain area unit checklists for auxiliary processes and safely/environmental needs. • Provide constant feedback and documentation of process status using Gant charts, statistical process control (SPC) and other relevant tools. • Participate in emergency response. (This includes safe and orderly start up and shut down). • Participate in continuous improvement activities. • Monitor recording instruments, flow meters, panel lights, DCS and other indicators, and listen for warning signals, to verify conformity of process conditions. • Record operating data such as process conditions, test results, batch formulation quantities, and instrument readings. • Calculate material requirements or yields according to formulas. • Draw samples of products, and conduct quality control tests to monitor processing, and to ensure that standards are met. • Notify maintenance, engineering, and other auxiliary personnel to correct equipment malfunctions and to adjust power, steam, water or air supplies. • Start pumps to wash and rinse reactor vessels, to exhaust gases and vapors, to regulate the flow of oil, steam, air, and to add products to converter, blending vessels, or dryers. • Maintain housekeeping in the Electrolyte area as necessary. Responsible for proper storage and maintaining adequate aisle space for raw materials and finished goods. Ability to continuously learn and adapt to change. • Ability to effectively communicate and interact with diverse groups of people. • Ability to function in a team environment. • Ability to work 12-hour rotating shifts. • Must be able to use all required PPE, including full face respirator and chemical suit. • Must be able to climb ladders to 75 feet. • Must be able to walk, bend, kneel, and climb. • Must be able to work in a high temperature and humidity environment. • Must be able to lift to 60 lbs. Other duties as assigned
Basic Qualifications • High school diploma or GED certificate. • 1 year of manufacturing experience or PTech degree. • 1 Working knowledge of Word, Excel, Power Point and SAP.
• Prefer five years of related experience in a chemical manufacturing environment (can be met through demonstration of ability testing or a technical degree or college degree). • Proficiency in industrial math, reading comprehension, and mechanical reasoning.
Job:PROD - Production, Maintenance & Technicians
Organization:N-CIN-Intermediates North America
Description Immediate opening for Pipefitter with Tradesmen International in Triad area. Responsibilities include but are not limited to the following:
Coordinate with job site manager to configure pipe system layout.
Order proper pipes and other materials.
Select supports, hangers, and hydraulic cylinders.
Assemble materials at job site.
Select type and size of pipe.
Cut, thread, and hammer pipes according to pipe system specs.
Use saws and cutting torches to craft proper pipe sizes.
Turn off steam, water, or gas from pipe section.
Secure pipes to walls and fixtures using brackets, clamps, tools or welding equipment.
Secure pipes to radiators or tanks.
Repair and maintain pipe systems and components.
Resolve problems such as obstructions or holes.
Dip nonferrous piping materials in molten tin and lead to prevent erosion, or galvanic and electrolytic action.
Remove water from flooded manholes or basements.
Repair cracks and leaks. No per diem offeredPay based on experience
Requirements For this Pipefitter position you must have the following.
Minimum 3-5 years of experience.
Able to confidently troubleshoot.
Professional in character and appearance.
Have reliable transportation.
Able to communicate well.
Company Details In addition to consistent work, top pay, and employment opportunities, as a Pipefitter with Tradesmen you will get a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with us.
Dental and vision plan
Prescription drug plan
Short-term disability + 401(k) profit-sharing savings plan
Incentive programs OSHA 10 training provided free of charge. Tradesmen International is an EO company
- M/F/Veteran/Disability Interested? Call Denae at 336-605-1889
to see the
in Our Short Video
Denae Kohler |
Recruiter Tradesmen International 7021 Albert Pick Rd Ste E, Greensboro, NC 27409 Phone: 336.605.1889 Fax: 336.605.1895
Recruiter Name Denae Kohler
Materials Engineer- Coatings
Materials Engineer- Coatings Materials Engineering Apply for this position SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MATERIALS ENGINEER – COATINGS RESPONSIBILITIES:
Provide guidance and expertise in coating and lubricant selection and properties for flight hardware
Design and carry out experiments to qualify coatings for use on space hardware in extreme conditions
Perform prototype surface treatment and coating process trials and characterization
Find and qualify new coatings for wear resistance, high temperature application, and corrosion protection
Evaluate coating vendors and suppliers BASIC QUALIFICATIONS:
Bachelor’s degree in materials engineering, chemistry, or chemical engineering + 3+ years of experience with surface treatments and coatings PREFERRED SKILLS AND EXPERIENCE:
PhD in material science with focus on surface science, coatings, or tribology
Strong desire to mentor and grow employees
Expertise with coatings for corrosion protection such as aluminum anodize, electroless and electrolytic plating, and conversion coatings
Experience with surface treatments and coatings in an aerospace application
Understanding of wear mechanisms, designing for wear performance including use of lubricants, and characterization of wear
Demonstrated track record of success in a rapidly growing, fast-paced, and highly competitive environment
Personality and drive to execute in a scrappy entrepreneurial environment that operates under tight timelines and aggressive schedules
Effective written and interpersonal communication skills
Capable of interacting with and conveying concepts within all levels of our organization ITAR REQUIREMENTS:
To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000. Job Location Hawthorne, CA, United States
Summary: Assist in the Lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems. This is accomplished by performing the following essential duties and responsibilities. Other duties may be assigned.
Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders.
Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.
Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment.
Inspect, examine, and test installed systems and pipe lines, using pressure gauge, hydrostatic testing, observation, or other methods.
Measure and mark pipes for cutting and threading.
Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
Plan pipe system layout, installation, or repair according to specifications.
Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications.
Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation, using hand and power tools.
Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools.
Install automatic controls used to regulate pipe systems.
Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches.
Remove and replace worn components.
Prepare cost estimates for clients.
Inspect work sites for obstructions and to ensure that holes will not cause structural weakness.
Operate motorized pumps to remove water from flooded manholes, basements, or facility floors.
Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action. Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Certificates, Licenses, Registrations – Depending on the job site, certain certificates or licenses may be required. Other Skills and Abilities
For safety reasons, it is imperative that the employee be able to read and speak fluent English. Other Qualifications
It may be necessary to travel or commute for this position. Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and will frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment is usually loud. Requisition ID: 2016-2081 External Company Name: Austin Industrial, Inc. External Company URL: http://www.austin-ind.com/
PM ASE Mechanical Engineer
Clearance Level Must Currently Possess: Secret (NACLC)
Clearance Level Must Be Able to Obtain: Secret
Suitability: Agency Specific
Job Family: Engineering & Sciences
In preparation for the potential upcoming award of the Aircraft Survivability Equipment support contract (PM-ASE), with a work location in Huntsville, Alabama, CSRA is seeking candidates with the following capabilities. Under this contract, CSRA will provide engineering, software engineering, platform integration and test expertise in support of PM ASE’s mission:
Develop and field world-class aircraft survivability systems that maximize the survivability of Army aircraft against a continually evolving threat without degrading combat mission effectiveness. In this role as Mechanical Engineer, - Independently performs/oversees/assists ASE platform integration, test data analysis, lab management, and systems engineering tasks. Provides highly unique expertise to advise senior leadership in the area of ASE systems engineering to conduct analysis of complex technical challenges/issues and strategic plans. (structures, boxes, material – mounting, electrolytic properties (corrosion), AWR – airworthiness release, safety of flight, vibration, fatigue, repair, anything physically damaging – non-electrons) MIL-STD 810G for environmental testing is a plus, rain exposure, dust exposure. MIL-STD-1472 Human Factors, impact resistance and survivability of the equipment, AO (operational availability), mean time to repair (shared with industrial engineering). Support budgets, PMADS, meeting with stakeholders (local and distant). # of Openings:
1 Scheduled Weekly Hours:
40 T elecommuting Options:
Telecommuting Not Allowed
Work Location: USA AL Huntsville - 5222 Martin Rd, Redstone Arsenal (ALC023)
Additional Work Locations:
CSRA is committed to creating a diverse environment and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.
THINK NEXT. NOW. CSRA is tomorrow’s thinking, today.
To “Think Next. Now.” is to imagine a better future and to deliver it, today. For our customers, our partners, and ultimately, all the people our mission touches, CSRA is realizing the promise of technology to change the world through next-generation thinking and meaningful results.
We understand that our customers' missions require new methods and imaginative thinking. We bring together government IT professionals, emerging technologies, and the brightest, cutting-edge advisors in the industry to deliver a broad range of innovative, next-generation IT solutions and professional services to help our customers modernize their legacy systems, protect their networks and assets, and improve the effectiveness and efficiency of mission-critical functions for our warfighters and our citizens. Everywhere you look, CSRA is there.
We’re in our nation’s infrastructure, in training and education, in cyber security, in serving veterans who served us—and, so much more. Take some time to learn more about CSRA. You might be surprised to learn how we touch your life.
We are a company of 18,000+ smart, talented individuals, yet we enjoy a start-up culture that inspires us to make a difference while delivering results in this rapidly evolving world. Join our team and use your skills and expertise to support the safety, security, health and well-being of the nation.
Aircraft Mechanic II 23022 - Machinist - Jacksonville
Aircraft Mechanic II 23022 - Machinist
Jacksonville About the OrganizationM2 Services Corporation's mission is to be the preferred provider of professional and technical services, logistics, security and facility support services to Government agencies and large business partners.Quality and Integrity, these are the characteristics that M2 looks for in a future employee, M2 works hard to be responsive to our customer's needs and strives to provide our customers with a skilled and qualified work force.M2 Services Corporation offers a competitive salary and comprehensive benefits package including medical, dental, vision, life insurance, AD&D, short and long term disability, 401K and much more.Background checks and drug screening are mandatory for all applicants considered for employment with M2 Services Corporation.M2 Services Corporation is an equal opportunity employer and does not discriminate on the basis of race, color, gender, religion, age, sexual orientation, national or ethnic origin, disability, marital status, veteran status, or any other occupationally irrelevant criteria.M2 Services Corporation promotes affirmative action for minorities, women, disabled persons, and veterans. EOE StatementWe are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law. CategoryAviation PositionAircraft Mechanic II 23022 - Machinist
Jacksonville Description The Aircraft Mechanic II maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Location:Jacksonville, FL FLSA:Hourly
SCA Status:Full-time Contract Status:Current Position Requirements Duties and responsibilities Contractor personnel shall have at least two years of documented experience in Aerospace and/or machinist trade. The Contractor shall provide certification to the COR of this experience during the first 30 days of performance and/or upon hiring. Contractor personnel shall set up and operate all types of conventional machines, computer numerically controlled (CNC) machines and related equipment in the manufacture, rework, and repair of aircraft parts and components. Contractor personnel shall set up and perform machining operation on conventional and CNC machine tools such as grinders, milling machines, lathes, and drills. Contractor personnel shall set up and operate 2, 3, 4 and 5 axis machining centers, electrical discharge machines, electron beam welders, electrolytic chemical grinders, and CBC grinders,. Contractor personnel shall use a variety of machine tool attachments or related equipment to perform precision machine work; maintain accuracy in accordance with requirements of blueprints, drawings, sketches, work documents, aircraft technical documents, manuals, bulletins, and directives; produce assigned work in accordance with established standard; and perform all work in compliance with all safety rules and regulations in the production shop environment. Qualifications
Must be organized, able to prioritize job assignments while meeting deadlines
High school diploma or equivalent
Must be able to read, write and speak English fluently
Able to deal with stressful situation while maintaining a professional attitude Working conditions
Aircraft maintenance environment
In and around aircraft and ground support equipment, maybe subject to loud noises, exhaust fumes, dust, extreme weather conditions
Must be able to work all shifts as needed, shift times/ work weeks may be altered to meet customer requirements with minimum amount of notification Physical requirements
Must be able to safely move about in aircraft maintenance environment
Must be able to sit, stand, squat, walk, and talk for extended periods during an 8 hour shift Direct reports Reports directly to the Working Lead and Site Supervisor. Exempt/Non-ExemptNon-Exempt Full-Time/Part-TimeFull-Time LocationFRCSE DLM
- Jacksonville, FL ShiftVarious Shifts Type of Contract: Awaiting Award, New or CurrentCurrent Rate of Pay25.15 DivisionFRCSED-JACKFL Number of Openings1 Hiring Manager(s)Barbara Gueltzow, Billie Dickson, Billy Bailey, Chris McAllister, Dale Blalock, Lowry Peaks, Ronny Morris This position is currently accepting applications. Apply Now
Description Scope: A Plating Operator is actively involved in various processes within the plating department to include etching, stripping and oxidizing PCB panels. A Plating Operator must maintain the work area in a safe environment while working with chemical processes and using high speed pressure equipment. A Plating Operator must meet or exceed output targets by understanding the product flow and handling procedures within the department. A Plating Operator will be exposed to hazardous waste while performing daily job duties. Operators will undergo Chemical Handling training prior to the start of performing these duties and will actively participate in ongoing hazardous waste and chemical handling training. Duties and
Operate wet process equipment for PCB panel processing through functions which include manual copper plating, solder plating, silver immersion, gold immersion, electroless copper, electrolytic gold, outer layer etching, organic coating, and hot air level processing.
Set and maintain chemical processing equipment within operational parameters.
Cautiously load racks in plating tanks while ensuring proper temperature/current of baths.
Read blueprints and traveler documents to produce and move products according to customer specifications and to verify that all previous operations were completed.
Follow work flow dispatch as required while making allowances for schedule changes in response to Hot Jobs and customer requirements.
Immediately report any and all quality issues with panels and chemical baths to supervisor and/or Process Engineers.
Assist Process Engineers in running chemical process evaluations.
Perform preventative maintenance on all chemical machines.
Maintain the work area in a safe environment.
Use all required Personal Protective Equipment.
Complete all internal departmental documentation accurately.
Perform all tasks as requested and assigned by management.
Follow all safety measures when handling chemicals and hazardous waste with regard to use, mixing and disposing chemicals.
Requirements Essential Knowledge and
Have a thorough knowledge of process chemistry
Good hand/eye coordination
Ability to lift 40 pounds without straining
Ability to stand throughout entire shift
Ability to read, write and communicate in English to the degree necessary to perform the job
This position requires US citizenship or Permanent Residency to meet ITAR (International Traffic in Arms Regulations) requirements. Education and Experience:
High School Diploma or equivalent preferred
Two years experience in the Wet Process department preferable or related chemical environment
Requisition Number:* 15-0290 Title: Plating Operator
Post Date:* 8/3/2015 Work Hours: 2nd Shift
Country:* United States
System One, is currently working with a client who is seeking a Technician, who needs to have a diverse set of skills and will be part of a team that operates equipment including, but not limited to: powder process equipment, handling of raw materials, batching and mixing, furnaces, and electrolytic cells. • Technician will prepare and test samples using laboratory analytical equipment. • Technician will be required to operate overhead cranes, forklifts, and other mobile equipment as needed. • Technician will be responsible for equipment operation, recording and documenting results and observations systematically and completely in laboratory notebooks and computers.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!