Fiberglass Bonding Machine Tender Job Description Sample
Machine Tender I-Part Time-Saturday-Sunday
Part time-(Saturday through Sunday)---2nd shift and 3rd shift positions, hours 3pm-11pm and 11pm-7am
Hourly Rate 2nd shift: $14.67
Hourly Rate 3rd shift: $14.92
Executes predetermine methods to package product by the press or store as work in process. Performs visual inspections to detect obvious defects. Keep box counts in order to document the quantity of product being produced.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Package products at the press by following predetermine methods to minimize error.
Consistently meets production requirements.
Empty catch totes into gaylord where packaging at the press is not specified.
Perform basic visual inspection of product and report any quality defects to the shift supervisor.
Keep production area clean in order to promote a safe and neat work environment.
Packaging and labeling
Report any and all safety violations to the shift supervisor to ensure the working environment is free from safety hazards.
Engages in the daily operator maintenance program such as basic oiling of machines.
Collects data for Production Boards.
Performs other duties as assigned
Ability to understand and follow all safety procedures including but not limited to PPE, steel toe safety shoes, maintaining safety guards, etc.
Ability to tend to more than one machine at the same time..
Ability to use basic math skills including addition, subtraction, multiplying, dividing, counting and the use of tape measure.
High school diploma or general education degree (GED).
Up to three months of related experience.
OTHER SKILLS AND ABILITIES
Ability to use the required personal protective equipment at all times including steel toe safety shoes.
Requires ability to walk, stand, carry materials, stoop, kneel, bend at waist, and climb ladders or equipment.
Maximum unassisted lift – 50 lbs. Average lift less than 35 lbs.
Exposure to moving mechanical parts, fumes, airborne particles, and chemicals.
The noise level in the work environment is usually moderate to loud and requires hearing protection. Eye protection is also required.
Steel Toe Safety shoes required.
Temperature environment 40 degrees to 110 degrees.
Machine Tender - 2Nd
If Excellence Drives You, This Is Your Destination.Job Description
BEMIS HEALTHCARE PACKAGING is a world leader in the design and manufacturing of medical packaging and pharmaceutical packaging. The packaging is used to protect the sterility, potency, and condition of medical devices and pharmaceutical products used in emergency rooms, doctor" offices and clinics around the world.
Maintains continuous machine operations between shifts by reporting to assigned workstation prepared to assume production from previous shift at shift start.
Maintains continuous machine during shift by loading, running, packaging, and stacking finished product.
Performs and is responsible for in-process and final on-line inspection and testing of manufactured product.
Ensures quality control requirements are understood and met by reviewing all special instructions and requirements.
Documents items by performing required Statistical Process Control; quality checks/tests; lot number requirements; shipping label requirements.
Resolves production problems by; notifying set up personnel for assistance; notifying supervisor to obtain additional resources; if necessary, discontinue manufacturing operations until the problem is resolved.
Maintains a safe and clean work environment of complying with procedures, rules and regulations.
Documents production information into appropriate reporting system.
Promotes teamwork and effective working relationships among all contacts by setting positive examples.
Contributes to team effort by accomplishing related tasks as needed.
Responsible for working safely and maintaining a safe work environment; attends required training, identifies and reports hazards; wears required PPE for position; and is accountable for self as well as co-worker safety.
Participates in and supports World Class Operations Management (WCOM) teams.
Experience and Education:
High School diploma or equivalent
Experience in a manufacturing environment preferred
Skills and Abilities:
Able to work independently with minimal supervision
Able to count, document, and process required paperwork
Basic math skills
Able to read and interpret work instructions
Able to continuously stand, grasp and forward reaching during entire shift
Able to lift, carry, push or pull 50 lbs. occasionally during the shift
Why choose Bemis?
Benefits Package! Excellent benefits including immediate eligibility for medical, dental & life insurance. Other benefits include gainshare plan, 401(K), paid vacation, holidays and sick days, perfect attendance program, stock purchase plan, along with other programs.
Safety! We pride ourselves in being one of the safest manufacturers in the country. We want our employees to go home in the same condition they arrived.
Training and Development! We invest in you! We help you develop your skills to make you a greater asset. After all, our human capital is our most important resource.
Values! We believe in doing the right thing because it is right. We are founded on our core values
- Ethics, Innovation, Accountability, and Respect. Everything we do starts here.
Wage range for this position starts at $15.39/hr with an additional .25/hr shift differential. Potential increases every 6 months up to a maximum of $17.49/hr with an additional .25/hr shift differential.Second Shift Hours: Monday
Friday from 4:00 pm
Bemis is committed to its core values: Ethics, Accountability, Innovation, and Respect. By becoming an employee at Bemis Company, Inc., you will work in a high performing environment where team members collaborate to get the job done, challenge the status quo to find a better way, and embrace unconventional ways of thinking. We are eager to see how you can make an impact in our high performance culture.
Bemis Company, Inc. is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.
Paper Machine Tender
Clearwater Paper Corporation in Shelby NC has exciting career opportunities for experienced machine operators to support paper machine operations. Successful candidates will have a minimum of one (1) year of industrial manufacturing experience with machine operation, High School diploma or GED, and knowledge of mechanical processes. This position will work 12 hour shifts, rotating with 2 days on, 2 nights on and 4 days off. The work week rolls forward each week. This position includes the need to work OT when necessary.
A combination of experience in the following areas is also desirable: Demonstrating personal safety awareness and promoting a safe work environment, Willingness to work rotating shifts and overtime, Ability to communicate effectively in a team or self-driven environment, Good mechanical and troubleshooting skills, solid computer skills, operate high speed equipment after an initial training period. Paper machine, converting, or other process related experience is also preferred.
Clearwater Paper offers competative pay, opportunities for advancement, an excellent benefit package that includes medical, dental, vision and life insurance, 401(k) plan with employer match, a wellness program, tuition reimbursement and others.
Key responsibilities are not limited, but include:
Maintain safe and clean working environment by complying with procedures, rules, and regulations
Familiar with Lockout/Tagout policies as well as Confine Space policies
Assist with control room operating duties, such as blade changes and machine sheet breaks
Examine completed work to detect defects and verify conformance to work orders, and adjust machinery or notify appropriate individuals as necessary to correct production problems
Assist in Continuous Improvement projects, such as 5S events and Kaizens
Assist during maintenance outages and felt and wire changes
Move finished rolls, chemicals or other materials to and from storage or production areas and loading docks with material handling equipment
Learn DCS for Machine Operations
Learn Wet end and Dry end components of a Paper Machine
Support operations of a small gas fired Boiler – boiler startup and boiler water testing
Adjust Paper Machine Process To Maintain Quality Centerlines Of Paper
Assist Quality Department during trials
Enter Work Orders Into JDE Work Order System To Identify Equipment In Need Of Repairs
Work With Maintenance and E&I Department in Completing Work Orders
Able To Prioritize Several Situations At Once
Other duties as assigned
Required qualifications and competencies:
High school education or GED required
At least 1 year of industrial manufacturing experience with machine operation
Problem solving ability
Solid communication skills including reading, writing and verbal skills
Additional experience preferred:
Achievement of technical skills in all positions on the paper machine
Prior DCS (Distributive Control System) experience
Tissue paper experience
This position requires working in all areas of the paper machine. Lifting, bending
will be required. The area is hot and loud. There are slipping, tripping andfalling hazards, as well as in running nips and suspended loads. Compressedair, steam, lubrication oil and hydraulic fluid will be used in the papermachine area. Travel for this position is minimal, but may be occasionallyrequired. Overtime is required to complete critical tasks and meet deadlines.
JOB REQUIREMENTS: Machine Tender (General Laborer) 1st shift (6 am - 4:30 pm M-Thur.), $16.00 - $17.00/hr.
If you are a Jack Of All Trades - this is the job for you! The Machine Tender will help with general labor within a manufacturing setting. Position Summary Assist the machine operators by loading and unloading the machines Cuts/saws raw tube into specific length according to print Bend material per print Maintains clean work environment Expands and notch end of tube according to print Deburrs end of tube to smooth ends of tubes Be able to read blue prints Ability to lift 40 pounds For immediate consideration: forward your resume to:
OR - Apply in person and have an on-the-spot interview at: US Tech Force, 1040 Spencer St, Suite 101, Appleton, WI 54914 OR - Visit our website for an up-to-date list of job openings or to apply: Call at:APPLICATION INSTRUCTIONS:
Apply In Person: US Tech Force 4010 W. Spencer St Suite 101 Appleton, WI 54914 Mail a Rsum:
US Tech Force 4010 W. Spencer St. Suite 101 Appleton, WI 54914 E-Mail a Rsum:
Apply Online: Fax a Rsum: Call For Appointment:
Metal-Composite Bonding Mechanic (Aerospace)
Triumph Group designs, engineers, manufactures, repairs and overhauls a broad portfolio of aviation and industrial components, accessories, subassemblies, systems and aircraft structures. We partner with original equipment manufacturers (OEMs) and operators of commercial, regional, business and military aircraft worldwide, to provide products and services that solve their hardest problems. So whatever the part, component or complexity of assembly, Triumph is committed to quality, service and meeting the specialized needs of each customer.
About the Company
Triumph Precision Components-Fort Worth is a world leader in metal and composite bonding for both structural and non-structural components for the aerospace industry. With extensive machining and sheet metal capability, Triumph Precision Components-Fort Worth provides a wide range of services including sub-assembly processing and system/component integration. We offer a unique environment that fosters individual growth and rewards performance. The work environment is fast-paced and high-energy. You'll be surrounded by people who are passionate about what they do.
We recognize people as our most valuable asset. Our competitive salary and benefits package includes 401K, matching 401k, stock ownership plans, dental insurance, medical insurance, disability benefits, prescription drug coverage, life insurance, casual dress, paid company holidays, and tuition reimbursement.
About the Opportunity Help us succeed by doing your part as a member of our Bonding department as a Composite Bonding Mechanic. This position's main responsibility consists of pre-fitting and laying-up aluminum and composite metal details for use in the bonding process.
- First & Second Shift positions available*
Major duties of a Composite Bonding Mechanic include:
Uses small hand tools used for cleaning tools prior to bonding
Lays out articles, cuts parts or materials to size.
Applies liquid or solid bonding agents.
Makes a leak proof bag and perform pressure check.
Controls conditions of heat, pressure, and timing by setting and operating various controls according to the specifications for the materials and the bonding agent being used.
Sands, burrs and smoothes over areas, apply sealing resins to cut or exposed edges.
Monitors and verifies quality of finished product.
Completes repairs on composite, metal or laminate bonded products using inspection and rework instructions.
Reads and interprets blue prints and customer specs
High school diploma or general education degree (GED) required;
One to three years related experience; or equivalent combination of education and experience.
Composites And Bonding Specialist Fist Level Manager
Job Summary About Us
Spirit AeroSystems designs and builds aerostructures for both commercial and defense customers. With headquarters in Wichita, Kansas, Spirit operates sites in the U.S., U.K., France and Malaysia. The company's core products include fuselages, pylons, nacelles and wing components for the world's premier aircraft. Spirit AeroSystems focuses on affordable, innovative composite and aluminum manufacturing solutions to support customers around the globe.
Fabricates detail parts and sub-assemblies from composite and bonded materials using conventional, numerical control, and special composite/bonding fabrication equipment. Performs related functions to provide complete composite/bonding fabrication details and sub-assemblies.
Skills & Experience
Must be willing to work any shift
1+ years of leadership experience in a manufacturing environment
Must have composite experience dealing with graphite
- High School Diploma
Spirit AeroSystems is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, marital or civil partnership status, pregnancy, age, disability, veteran status or any other protected factor under federal, state or local law.
The Maintenance Department is currently seeking an experienced Fiberglass Technician.
Job Duties Include:
Hand laminating, working a chopper gun, and rolling out fiberglass materials.
Vacuum forms and bonds plastics such as ABS, kydex, polycarb and plex.
Ability to grind fiberglass with power hand tools both in shop and on Rides.
Removing and repairing various materials and surfaces. Such as, install various seatbelts and change out upholstery.
Fabricating parts from polyester resin and urethane foam.
The ideal candidate must possess:
Ability to prepare a pattern and pull a tool or a part.
Ability to assemble and install fabricated parts.
Basic knowledge of plastic materials, adhesive and fasteners.
Four year experience in fiberglass assembly and polyester resin/hand laminating.
Good mechanical skills
Position requires full availability to work a variety of shifts, including weekends and holidays.
Park: Six Flags Magic Mountain
Manufacturing Engineer ( Diffusion Bonding / Plating)- Charlottle
Division: Power and Gas
Business Unit: Large Gas Turbines, Generators
Requisition Number: 221532
Primary Location: United States-North Carolina-Charlotte
Assignment Category: Full-time regular
Experience Level: Mid level
Education Required Level: Bachelor's Degree
Travel Required: No
Siemens sets the standard for excellence in power generation, transmission and distribution, and provides innovative customer solutions – from utilities, to industrial space, to oil and gas companies. Siemens' portfolio includes power plants and power-generating equipment, turbines for use as mechanical drives, compressors for industrial applications, power transmission and distribution systems, smart grid applications, and related instrumentation and control systems.
This position is for a Diffusion Bonding / Plating Manufacturing Engineer in the Large Gas Turbine manufacturing of Combustion Components. The successful candidate will be working with a team of manufacturing and design engineers, the metrology group, and interfacing with shop floor personnel to create robust manufacturing processes and develop new technology to improve efficiency and reliability of the hot gas path parts.
The successful candidate will be responsible for managing the technology of a diffusion bonding process, including the plating line, material preparation, laser cutting, and parameter control. The position will also be responsible for documentation of standard processes, personnel instructions, fixture design, and operator training on the use of the equipment. Critical features of this job include working with Design Engineering on new product development, design of parameters and geometry on new product. Running the actual equipment, if required particularly during process development, will be necessary.
Required Knowledge/Skills, Education, and Experience:
Bachelor's Degree in Mechanical or Manufacturing Engineering or related field
5+ years of manufacturing experience
3+ years of experience with bonding/plating
Basic computer skills, Microsoft, SAP, CAD.
Strong Attention to detail
Focus on quality and continuous improvement
Record keeping of tests and changes for qualifications and approval process
Ability to interpret complex blueprints and specifications
Qualified Applicants must be legally authorized for employment in the United States. Qualified Applicants will not require employer sponsored work authorization now or in the future for employment in the United States.
Preferred Knowledge/Skills, Education and Experience:
Knowledge of robotic programming
Lean manufacturing experience.
Familiarity with materials lab analysis and results interpretation
Metal Tender 2Nd Shift
Who we are and what we do:
Pace Industries is North America's leading full-service die casting manufacturer. Our mission is to provide uncommon, creative die casting and support solutions that contribute to the success of our customers. Our die cast parts are used in automobiles, motorcycles, generators, snow mobiles, lawn mowers, washing machines, power hand tools, BBQ grills, commercial lighting and many other well-known products. You can have a significant impact on our cultural transformation.
The Cambridge Division is one of Pace's longest-running facilities. Founded in 1945, Cambridge has been providing contract manufacturing die casting worldwide for more than 65 years. A 300,000-square-foot facility provides a large environment for expert manufacturing services.
Keep the holding furnaces on the die cast machines full of proper alloy of metal and at proper temperatures. This process, called hauling metal, must be done in a safe, efficient, and timely manner as to keep production running always while minimizing costly mistakes such as overfilling furnaces, overfilling ladles, spilling metal, letting furnaces run too low on metal, mixing alloys, etc. Must safely and efficiently support the production requirements and assure the proper alloy is provided for the parts being cast.
Duties and Responsibilities:
Keep transfer (bull) ladles, furnace, and die cast holdings properly cleaned and/or heated.
Keep scrap hoppers emptied and identified.
Keep alloys separated. This applies to all metal including those stored, in any furnace, or in scrap form.
Keep all areas cleaned including but not limited to melt rooms, work areas, tools/supplies and properly stored. Daily chipping, cleaning, fluxing, and skimming of breakdown furnaces. This also includes Striko Holding Furnaces. (clean, fill funnels, and pouring spouts. Coat as needed).
breakdown furnaces. This includes jackhammering, cleaning, forming, ramming, casting, painting, etc.
Charge metal to breakdown furnaces in such a way as to keep them full of the proper alloy metal and at the proper temperatures. Metal is charged in form of sows, ingots, castings, and ingredients.
Perform alloy changes in any furnace properly.
Run spectrometer including cleaning, profile, standardization, and routine analysis.
Properly handle paperwork, sampling, and barcoding of all incoming metal/materials.
Capable and willing to work overtime.
Work in a safe manner and report unsafe conditions/hazards immediately. Wear required personal protective equipment.
Must have high school diploma or equivalent.
Must be able to read and understand written directives. The predominate forms of instructions are written, visual, and verbal.
Properly handle all department paperwork including labor cards, production sheets, check sheets, metal hauling sheets, barcodes, audit logs, furnace cleaning sheets, scrap cards, flux/dross cards, etc.
Forklift certification required.
This is a physically demanding position requiring moderately heavy lifting and working in a hot environment.
Must follow and understand all safety rules and policies as set forth by OSHA guidelines.
Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities.
Pace Industries has a strong commitment to the principle of diversity, and in that spirit, seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline.
Help Requirements Conditions of Employment
Appointment may require a suitability/fitness determination.
This position is subject to a pre-employment drug screening, and random testing thereafter, to include testing based on reasonable suspicion and testing due to direct involvement with an on-duty.
The duties of this position require the incumbent to possess or obtain and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles.
This position requires the completion of a pre-employment Physical Examination. This measures the level of physical health and ability or fitness to perform the duties of the position.
This position requires shift work to provide coverage on evenings, weekends, holidays, or special situations. Employee shifts are rotated on a regularly scheduled basis.
This position requires a current U.S. Coast Guard (USCG) license to operate as a Master of Towing Vessels upon the Western Rivers of the United States.
Who May Apply: US Citizens
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.
There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.
Minimum Qualifications (Screen Out Element): Ability to do the work of a(n) Master Tender~ without more than normal supervision. I have the ability to perform common Master Tender duties such as operating small towing vessels and small motorized watercraft to facilitate the operational needs of the other vessels by performing numerous operations tasks. I can build and segment tow, spot barges alongside vessels and/or docks, and pilot vessels on short transit assignments. I work under normal supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed - Failure to meet this Screen out Element will result in an ineligible rating.
Ability To Do The Work Of The Position Without More Than Normal Supervision (Screen-out Element)
Ability To Interpret Instructions, Specifications, etc. (related to mobile equipment operation)
Ability to perform Motor Vehicle Operator duties w/o more than normal supervision
Reliability and Dependability as a Towboat Operator
Physical Effort: Operating the vessel requires standing for long periods of time.
Working Conditions: Work is performed inside and outside. The incumbent is subject to hazards of heavy river traffic ant night and during foggy weather.
This job does not have an education qualification requirement.
Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
You will be required to provide proof of U.S. Citizenship.
Two year trial/probationary period may be required.
Direct Deposit of Pay is required.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
This is a Career Program (CP) 18 position.
You may claim military spouse preference.
Multiple positions may be filled from this announcement.
Salary includes applicable locality pay or Local Market Supplement.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority. To receive selection priority for this position, you must: (1) meet ICTAP eligibility criteria; (2) be rated well-qualified for the position with a score of 90 or above; and, (3) submit the appropriate documentation to support your ICTAP eligibility. Additional information about the program is on OPM's Career Transition Resources website.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. If you are minimally qualified, your résumé and supporting documentation will be compared against your responses to the assessment questionnaire to determine your level of experience. If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Basis for Rating: Qualified candidates will be assigned to one of three quality categories: Best Qualified, Highly Qualified and Qualified. Veteran preference eligibles are listed ahead of non-preference eligibles within each quality category.
Best Qualified. Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for the announced position.
Highly Qualified. Candidates in this category possess good skills and experience above the minimum requirements for the announced position.
Qualified. Candidates in this category meet the minimum experience requirements for the announced position.
Background checks and security clearance
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!