Filter Press Tender Job Description Sample
Web Press Roll Tender
Title: Web Press Roll Tender
Job ID: 807
Secaucus, NJ, US, 07094
Category: Manufacturing -- Other
Donnelley Financial Solutions (NYSE: DFIN) provides software and services that enable clients to communicate with confidence in a complex regulatory environment.
With 3,500 employees in 61 locations across 18 countries, we provide thousands of clients globally with innovative tools for content creation, management and distribution, as well as data analytics and multi-lingual translations services. Leveraging advanced technology, deep-domain expertise and 24/7 support, we deliver cost-effective solutions to meet the evolving needs of our clients.
Night shift 7pm - 7am; weekends and holidays, a must
Load rolls of paper onto automatic splicing unit of web offset printing press. Inspect rolls of paper for blemishes or tears and cuts away damaged area with knife.
Roll paper into loading position on automatic splicer, insert shaft of automatic splicer through roll core, secure holding chucks of automatic splicer to shaft ends, and thread paper through press components to prepare press for printing. Apply adhesive strip to backup roll and insert backup roll onto automatic splicing unit of press to prepare paper for automatic splicing. Remove roll of leftover paper from press after automatic splicing.
May operate mechanical truck to transport rolls of paper to press area. May assist with some of the make-ready tasks associated with the type of press operated such as hanging plates, examining plates, prepping and installing blankets, adjusting tension etc. May clean press and clean and install press components to maintain press in working order. May prepare and Prepares and loads flat stock into a sheet fed press.
Requires general knowledge of offset presswork procedures and materials. Ability to read and follow job specifications to determine materials needed to run the job successfully.
Ability to make adjustments to auto splicer. Knowledge to load paper and prepare slice for continuous operation of the press. Knowledge of materials and requirements for press.
It is the policy of Donnelley Financial Solutions to select, place and manage all its employees without discrimination based on race, color, national origin, gender, age, religion, actual or perceived disability, veteran's status, actual or perceived sexual orientation, genetic information or any other protected status.
If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access jobs.dfsco.com as a result of your disability. You can request a reasonable accommodation by sending an email to AccommodationRequests@dfsco.com.
Associate Veterinarian - Tender Paws Animal Hospital
Tender Paws Animal Hospital is looking for a third doctor to join our well-run, growing hospital in Conroe, TX! For the past fifteen years, we have served the Conroe, Willis, Montgomery and The Woodlands areas and maintained our well regarded and successful hospital by providing outstanding customer service and quality care to our clients. We focus on educating our clients and improving the quality of life for their pets!
We have a tenured and highly trained staff that allows you to concentrate on quality small animal veterinary medicine and surgery. We place a great deal of importance on diagnostics and diet and nutrition. We are also well-equipped with digital x-ray, laser therapy and provide on-site ultrasound and echoes, and use complementary medicine such as acupuncture and herbs with traditional medicine.
We are looking for an Associate Veterinarian who shares our values, looking for a place to grow and interested in leadership opportunities. This doctor will be doing routine surgeries, dentals, emergency surgeries and exams. If this sounds like a great fit, we welcome the opportunity to speak with you!
• Develop a rapport with clients and determine their needs and wishes; perform physical examinations and diagnostic/medical/surgical/dental procedures in a way that will deliver the highest quality care while minimizing patient stress and discomfort.
• Explain physical examination findings and communicate to the client a diagnosis of the pet’s problems; generate and present a treatment plan for the pet to the client; educate clients on preventative health care, including vaccines and appropriate nutritional products.
• Maintain client/patient medical/surgical records and make certain all necessary logs are kept up-to-date through established protocols; assist colleagues in follow-up and future management of the patient.
• Stay up-to-date with new medical information and changes in veterinary medicine, attend Continuing Education meetings.
• Assist in the development of the paraprofessional team to ensure the delivery of the highest quality care and exceptional client service.
• Positively represent the hospital in the professional community and to the general public.
• Treat every client like family and each patient like your own pet.
• Doctor of Veterinary Medicine (DVM) degree from an accredited university
• Licensure in good standing to practice in the state of TX
• Professional comportment and appearance, with excellent interpersonal skills and a positive, friendly attitude
• The ability to make decisions and communicate clearly and effectively with fellow team members
• Respect for and willingness to work with clients and their pets
• Compassionate team player who can uphold great reputation with clients
• A commitment to practicing the highest standard of medicine, upholding the veterinary code of ethics
• Proficiency in surgery a plus
Competitive salary, growth bonuses and a comprehensive benefits package, including:
• Medical Insurance
• 401(k) retirement savings plan
• Continuing Education allowance
• Professional Liability Coverage
Oil Filter Representative
Heritage-Crystal Clean (HCC) is a publicly traded company that continues to be a leader in the environmental services industry. We are seeking highly motivated individuals with a strong work ethic to join our rapidly growing company. HCC offers competitive compensation, excellent benefits, and opportunities for advancement. We are willing to provide complete training for this opportunity!
The Oil Filter Representative (OFR) will be responsible for supporting the Company's used oil program by performing used oil filter collection services at HCC customer facilities. Service responsibilities will include collecting used oil filter containers of varying weights and sizes from HCC customer facilities using HCC-approved material handling equipment and transporting the used oil filter containers using a Commercial Motor Vehicle.
Responsible for engaging in and promoting safe work behaviors in a manner that is consistent with all HCC safety guidelines
Responsible for customer service and new business development in a certain geographic area as assigned by the Company
Aligns work orders to minimize mileage and travel time
Inspects vehicle and equipment for safe operation
Service and maintain all existing and new Oil Filter customers
Pursues additional services with existing accounts
Assesses potential customer needs, presents HCC products and services to customers, and develops new customers
Develops sales leads for Data-Marketing.
Complete all required paperwork accurately and neatly.
Maintains compliance with all applicable Department of Transportation (DOT) requirements
Achieve sales quotas for total revenue and new customer development
Adhere to all corporate policies and standards including but not limited to environmental, health, & safety (EHS), human resources, facility, equipment, operations and maintenance.
Performs other related duties as assigned
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The following requirements are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
Core Competencies and Specific
Strong communication skills, attention to details, and ability to sell and upsell products
Ability to interact with customers, sales branch employees, and other corporate departments
Ability to operate equipment such as electronic mobile devices, computers, all truck equipment, etc.
- Route sales experience preferred
Education, Certificates, Licenses, or Designations:
High School diploma or equivalent required
Must have or be qualified to obtain and maintain a Class B Commercial Driver's License (CDL) and Med Card with Airbrake and HAZMAT, Tanker endorsement preferred
Motor vehicle record (MVR) that meets or exceeds HCC's published standards including, but not limited to the following;
Seat belt and cell phone violations
DUI, suspension and/or multiple vehicle collisions
Personal Protective Equipment*:
- Ability to wear personal protective equipment, which may include a respirator, steel toe boots, gloves, uniform, safety glasses, reflective vest, and hard hats
Frequent lifting of empty 55 gallon drums and toters up to 50lbs in weight
Frequent bending and lifting of used oil filters from the ground
Frequent pushing/pulling of 16-55 gallon drums and toters of waste/product using HCC-approved equipment for safe material handling. Drum weight varies based on material type and size, weight may exceed 400lbs.
All applicants must pass the pre-employment physical including drug & alcohol screening.
While performing essential duties of this position an individual regularly works in a variety of environments, and is required to see, talk, hear, reach, stand, walk, drive frequently, and comfortably use electronic devices and other office equipment. Essential duties require bending, squatting, climbing, lifting and twisting frequently. Noise level in the workplace can vary based upon the work environment. Reasonable accommodations may be made to enable individuals with disabilities to perform essential duties.
- Please refer to "Oil Filter Representative – Addendum" for physical requirements and work conditions.
Heritage Crystal Clean LLC is an Equal Opportunity Employer. We strongly encourage women, minorities, individuals with disabilities and veterans to
Machine Operator / Roll Tender - 2Nd Or 3Rd Shift
Ashton Potter Security Printers is the leader in the industry providing global product security solutions that connect the physical and digital worlds.
We are seeking career minded talent to join and enhance our growing team.
Duties include but not limited to:
- set-up and operate Letterpress or lithographic printing machines with impact numbering capabilities.
- perform minor adjustments and minor preventative maintenance(PM)
- handle material and equipment of the press
- ability to perform visual inspection of product to insure quality of finished product.
Education and Required Experience
- Must have a minimum of 1 year experience in machine operation in a manufacturing environment
- High School diploma or general education degree (GED)
- Computer proficiency a plus
- Forklift certification a plus
- Printing Industry experience Preferred
ASHTON POTTER IS PROUD TO OFFER
Healthcare Benefits (Medical, Dental, Vision, Disability and Life Insurance)
Flexible Spending Account
Please Note: Candidates must submit to a background check, including credit, criminal and past employment and must be able to pass a drug test to be employed by Ashton Potter Printing.
Ashton Potter is an Equal Opportunity Employer M/F/Vet/Disability
Hvac Filter Technician
Grand Canyon University is seeking a full time HVAC Filter Technician. This position changes air filters and performs a variety of tasks to maintain and examine the safety and effectiveness of our HVAC equipment. The schedule for this position is Tuesday – Sunday 7:00am to 4:00pm and pays $18 hourly.
Examines installed heating/air conditioning systems to verify that system is functioning.
Assists skilled team members with repair and maintenance of HVAC and motors, filters, and clogged drains, loose belts, and ceiling tiles.
Follows safety and security procedures; reports potentially unsafe conditions.
Ensure that all HVAC units are secured after replacing filters and appropriate log records on the unit are updated.
Responsible for recording and maintaining work tickets and time records and logs as required.
Must have valid driver's license and clean driving record.
High School diploma or GED
HVAC technical certification preferred: strong background in reading and interpreting instructions and safety procedures associated with HVAC processes.
Willingness to work weekends, holidays, or extended hours as needed.
Must have valid driver's license and clean driving record.
Ability to lift and carry up to 75 pounds.
Must have own tools.
Provide a positive example to students by supporting the University's Doctrinal Statement, Ethical Position Statement and Mission of Grand Canyon University.
Staff Filter Design Engineer
This work entails all aspects of the design and development of state-of-the-art surface/bulk acoustic wave (SAW/BAW) components used in Handset applications. Acoustic design involves product definition, feasibility, computer simulation using commercial and custom tools, design for manufacturability, layout and test characterization.
The design of RF components in the range of 400MHz to 2.7GHz will be required, for applications such as LTE, WLAN, WiMAX, GPS, CDMA, GSM, WCDMA and Bluetooth
Design acoustic devices employing a variety of design techniques, including conventional bandpass filters, ladder filters and coupled-resonator (CRF) or dual-mode SAW (DMS) filters
Perform acoustic and electromagnetic (EM) simulations using a combination of commercially available tools as well as the company's state-of-the-art internally developed tools
Layout devices and generate photomask sets
Perform device characterization and diagnostics using the latest state of the art in RF/Microwave test equipment
Responsible of the continuous improvement of design flow, method and cycle time
MSEE with an RF focus required
3+ years of direct experience in SAW or BAW design required
Knowledge of RF/Microwave concepts, Wireless Communication, and/or EM simulation (HFSS or equivalent) a plus
Understanding of microelectronic fabrication and high volume manufacturing
MAKE A DIFFERENCE AT QORVO
We are Qorvo. We do more than create innovative RF solutions for the mobile, defense and infrastructure markets – we are a place to innovate and shape the future of wireless communications. It starts with our employees. As a unified global team, we bring a commitment to excellence, growth and a passion for creating what's next. Explore the possibilities with us.
We are an Equal Employment Opportunity (EEO) / Affirmative Action employer and welcome all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, military or veteran status, physical or mental disability, genetic information, and/or any other status protected by law.
Experience Level Individual Contributor Job Type Full Time Location FL - Apopka
Roll Tender (41815)
Load rolls of paper onto automatic splicing unit of web offset printing press.
Inspect rolls of paper for blemishes or tears and cuts away damaged area with knife.
Roll paper into loading position on automatic splicer, insert shaft of automatic splicer through roll core, secure holding chucks of automatic splicer to shaft ends, and thread paper through press components to prepare press for printing.
Apply adhesive strip to backup roll and insert backup roll onto automatic splicing unit of press to prepare paper for automatic splicing.
Remove roll of leftover paper from press after automatic splicing.
May operate mechanical truck to transport rolls of paper to press area.
May assist with some of the make-ready tasks associated with the type of press operated such as hanging plates, examining plates, prepping and installing blankets, adjusting tension etc.
May clean press and clean and install press components to maintain press in working order.
Must be able to work 7:00 pm to 7:00 am shift, 3 days on/4 days off, (Monday, Tuesday, Wednesday or Thursday, Friday, Saturday, alternating on an 8 week rotation). Opportunities for overtime.
RR Donnelley is an Equal Opportunity/Affirmative Action employer. The company's policy is to select, place and deal with all its employees without discrimination based on race, religion, color, national origin, sex, gender identity or expression, age, disability, perceived disability, sexual orientation, protected Veteran status, genetic information or on the basis of any other status protected by applicable federal, state or local law.
Requires 6 months up to 1 year of web press-printing experience.
Ability to read and follow job specifications to determine materials needed to run the job successfully.
Ability to make adjustments to auto splicer.
Knowledge to load paper and prepare slice for continuous operation of the press.
Knowledge of materials and requirements for press.
- Continuous standing/walking
- 8 hrs or more.
Occasional bending, kneeling, climbing, reaching.
Occasional lifting and pushing/pulling
- 50 lbs.
- Occasional repetitive motion with both hands.
Cross Product Line Tender Manager (Ofs) - Houston, TX; London Or Aberdeen, UK; Dubai, Uae; Kuala Lumpur, Malaysia
Cross Product Line Tender Manager (OFS) - Houston, TX; London or Aberdeen, UK; Dubai, UAE; Kuala Lumpur, Malaysia
Baker Hughes GE
Posted 10/5/2018 2:58:19 PM
Job Function: Sales
Business Segment: Baker Hughes GE Oilfield Services
Location(s): United States; Texas; HOUSTON
Baker Hughes, a GE company (NYSE:BHGE) is the world's first and only fullstream provider of integrated oilfield products, services and digital solutions. Drawing on a storied heritage of invention, BHGE harnesses the passion and experience of its people to enhance productivity across the oil and gas value chain.
BHGE helps its customers acquire, transport and refine hydrocarbons more efficiently, productively and safely, with a smaller environmental footprint and at lower cost per barrel. Backed by the digital industrial strength of GE, the company deploys minds, machines and the cloud to break down silos and reduce waste and risk, applying breakthroughs from other industries to advance its own.
With operations in over 120 countries, the company's global scale, local know-how and commitment to service infuse over a century of experience with the spirit of a startup – inventing smarter ways to bring energy to the world.
Follow Baker Hughes, a GE company on Twitter @BHGECo, or visit us at BHGE.com.
Baker Hughes, a GE company is currently hiring a Cross Product Line Tender Manager based in Houston, Texas, London or Aberdeen, United Kingdom, Dubai, United Arab Emirates or Kuala Lumpur, Malaysia.
This position is responsible for delivering winning cross product line tenders and managing the early strategy and scoping/bidding discussions to secure opportunities marked as Must Win Priority for the Oil Field Services business. The focus is on large and multi product line opportunities, and the Tender Manager will be personally involved in developing, supporting and leading selected opportunities globally and ensuring OFS is best positioned to win.
Own, and provide hands-on leadership for, selected cross product line Must Win Priority opportunities. Managing the deal review process, risk identification and mitigation, costing, pricing, deal strategy, terms and conditions, cross product line synergies and 3rd party optimizations to ensure a winning proposal is delivered.
Drive constructive Bid/No Bid discussions, including logging and follow up on actions to cover identified gaps ahead of tender release.
Work in conjunction with the region sales and commercial teams and product to drive commercial intensity and to develop commercial strategies and solutions for large cross product line offerings that will meet customer requirements as well as meet or exceed Oil Field Services business goals
Keep note of planned upsell opportunities and track performance against the plan
Conduct AAR (After Action Review) lessons learned reviews for assigned opportunities and communicate back to the organization, including key takeaways and actions follow up.
Work closely with the pricing team to develop cross product line project pricing benchmarking and apply to assigned opportunities.
Drive continuous process improvements and simplification opportunities which will drive Inquiry to Order (ITO) process compliance and efficiency, as well as increasing our win rates for these large opportunities.
Work closely with the regional and product line commercial operations teams to support them with the best processes and tools for their daily execution.
Act as a mentor, coach and trainer for the region and product line commercial operations teams as they build out their large complex tender capabilities
Bachelor's degree or equivalent knowledge and experience
Strong Technical Knowledge with Commercial and contractual skills
5 Years previous experience in Oil & Gas front end customer engagement, large project tendering and team management
Relevant experience in sales, operations, commercial or risk in Oil Field Services/Oil & Gas Projects Knowledge of legal aspects and implications of contracts, terms and conditions, negotiation, etc. to allow constructing contracts with minimizing risk
Ability to influence and lead cross functional teams
Strong oral and written communication skills
Strong interpersonal and leadership skills
Excellent networking and team working skills
Self-motivated with the ability to work both independently and as part of a team
Must be willing to travel frequently as and when needed
Industry knowledge / competitive landscape understanding at a transaction level
Proven coordination and influencing skills
Experience in New Product/New Offering designs/offerings
Experience in business development and / or building growth plans
Health, Safety, Security & Environment awareness
Experience of working in a multi-disciplinary environment
Houston, TX; London or Aberdeen, UK; Dubai, UAE; Kuala Lumpur, Malaysia
Baker Hughes, a GE company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Learn more
Locations: United States; Texas; HOUSTON
GE will only employ those who are legally authorized to work in the United States for this opening.
Press Assistant I - Roll Tender
A leading global provider of print and media solutions, Quad/Graphics is powered by a passion for innovation and the most advanced platform in the industry. Our collaborative team of "can-do" people continually challenge the status quo, creating groundbreaking solutions that push the boundaries of communications.
Quad/Graphics is currently seeking a Press Assistant I to work in the Nashville Tennessee Retail Plant. As a member of the press crew, the Press Assistant I (rolltender) has previous experience as a Press Asst. II (stacker) and is able to perform the duties of both positions and may be asked to do so from time to time. Key responsibilities of this position are to manage the paper supply inventory on the press, feed rolls into the press, and manage paper inventory. Other responsibilities include, but are not limited to product handling and stacker oversight.
- Previous experience as a Press Assistant II (stacker/jogger)
- Previous roll tender experience or training required
Must be able to work 12 hour rotating shifts. This includes days, nights and weekends. Also holidays as needed.
Ability to stand for the duration of the shift (12 hours)
Must be able to repetitively lift, push, and pull up to 50 lbs.
Ability to bend occasionally
Additional Company Information
We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more.
Quad/Graphics is an equal employment opportunity employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military or veteran status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories.
Drug Free Workplace
Press Brake Manufacturer
Strativia delivers technical and professional services to both government (federal, state & local) and commercial organizations worldwide. Our core services include: Web & Application Development, Big Data & Analytics, Cloud & Infrastructure, Cybersecurity, Program & Administrative Management, Management Consulting, Logistics and Operations, Integrated Facilities Management, and Staff Support. We work with our clients in a spirit of collaboration and true partnership by understanding their needs and delivering real results. We have seen tremendous growth in the past few years and expect that to continue for many years to come.
Strativia understands that our staff is our number one asset. Therefore, we provide competitive salaries and health benefits along with a robust training and development plans to help ensure that our employees are happy and motivated. If you are interested in the opportunity below please contact us an join a dynamic, fun and, fast growing organization.
We are currently looking to hire a Press Brake Manufacturer to work at Picatinny Arsenal in Wharton, NJ.
- Provide Press Brake fabrication support for the manufacture of metal components such as prototype gunner protection kits as well as other ongoing and future programs.
- Provide programming, setup, and operation of government owned equipment such as press brakes manufactured by LVD Group and Trumpf, Corbin presses, power presses, punch presses, vertical machining centers and other Computer Numerical Control (CNC) machining equipment.
- Operate one (1) piece of equipment continuously full time during normal duty hours.
- 5 years of experience with Press Brake Manufacturing, general shop practices, and the use of manufacturing tools and technologies
- Journeyman, Machinist, Tool and Die maker, or fifty (50) credits of relevant training and education
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!