Floor Winder Job Description Sample
Winder Operator III
Responsible for operation of extrusion equipment; including but not limited to, product quality, following all SOCs, winder flips, box making, core and resin supply constancy. Must comply with all safety, quality, GMPs, productivity and cleanliness standards.
Responsible meeting production and product requirements in accordance with the scheduled work order(s).
Makes boxes and waxes cores to be used to fulfill work order requirements on production line.
Ensure adequate raw material (compound) levels are available to consistently run line.
Performs first piece, periodic and finished roll quality checks: such as, roll weight, width, footage, stretch, core length, packaging and other quality inspections in accordance with Quality Line Report.
When applicable, and directed by work order, complete quality check on every roll.
Assists Production Techs in making changeovers, line thread-up, screen changes and other set-up tasks needed to getting production lines in operation.
Responsible for accurately completing and recording production data on work order paperwork.
All other assignments, general and specific, as directed by Supervision
Responsible for working safely, cleanly and ethically. Follow all plant PPE requirements, safety rules and policies. Reports unsafe conditions to supervisor immediately.
Responsible for maintaining general area housekeeping and recording its completion in the daily cleaning logs.
Responsible for following all GMPs to assure food product safety.
SECONDARY DUTIES AND RESPONSIBILITES:
This job description reflects the general details considered necessary to describe the principal functions of the job identified for the purpose of job evaluation.It should not be construed as a detailed description of all work requirements that may be inherent in the job nor shall be construed as giving exclusive title to every function described.
- Although certain positions have specific tasks and responsibilities with respect to food safety, the food safety and quality of all products manufactured by Berry is the responsibility of every Berry employee.
Coil Winder - 1St Shift
This person will be an integral member of Power Systems Division manufacturing team.
- The successful candidate must be willing to learn and become proficient in multiple facets of stationary and rotating magnetics with an initial focus on the stator production process at PSD South. Understand ITW operating principles and apply them to the manufacturing area.
Cross-training will be necessary in all areas of manufacturing. Candidate needs to be willing to work at any of the 3 PSD plant locations as business needs dictate. Willingness to adjust shift starting/ending times on occasions is required.
- A high school diploma or equivalent is required. This individual must be a self-starter with a positive attitude who has made the choice to be personally accountable and must be able to communicate well in a team environment and contribute to the success of the business unit.
This person must have willingness to cross-train and desire to work in a high volume environment. Good manual dexterity and cross training in all magnetics areas is required. The selected candidate must be able to stand for up to 12 hours per day, lift up to 50 lbs, and learn to read magnetics manufacturing documentation. The selected individual must be willing to work overtime as required (12 hrs/day and/or Fridays/Saturdays).
Winder Transformer C
Able to read and interpret winding connection drawings
Experience winding field coils
Self-starter able to work with minimal direction
Willingly accepts job challenges
Ability to work overtime
Experience with Health and Safety programs
Communication with customer personnel
Good mechanical skills
To stay connected with exciting news and the latest job opportunities from GE businesses, follow us on twitter: @geconnections
The Winder Transformer repairs, rebuilds, and rewinds small and medium-sized distribution transformers.
As the Winder Transformer, you will:
Repair, rebuild, and rewind small and medium-sized distribution transformers
Perform miscellaneous operations such as dismantle and clean parts, stack iron, assemble coils, and connect, assemble in tanks, and connect, paint, etc.
Help others with more complicated jobs
Perform other related duties as assigned
- High School Diploma or GED
- Minimum of 2 years of experience winding AC and/or DC armatures from 5 HP to 1,000 HP +
Willingness and ability to travel and complete overnight stays
Willingness and ability to work various shifts, holidays and weekends
GE is the world's Digital Industrial Company, transforming industry with software-defined machines and solutions that are connected, responsive and predictive. Through our people, leadership development, services, technology and scale, GE delivers better outcomes for global customers by speaking the language of industry.
GE Energy Connections designs and deploys industry-leading technologies that turn the world on. We transport, convert, automate and optimize energy to ensure we provide safe, efficient and reliable electrical power. Uniting all the resources and scale of the world's first digital industrial company, we connect brilliant machines, grids, and systems to power utility, oil & gas, marine, mining and renewables customers, that keep our world running. www.GEEnergyConnections.com .
We are a leading provider of automation and control products and services for equipment and plant control in Power Generation, Process, and Manufacturing industries. Our differentiated Industrial Internet solutions enable customers to optimize equipment performance and ensure reliable and efficient operations by connecting their equipment, data, and people to Insights and Actions generated through Analytics. Our Edge solutions include Outcome Optimizing Controls, Field Agents, Operator Interface products, and an Industrial Communications portfolio for hard to connect distributed assets. Our dedicated team includes some of the best minds in automation capable of solving our customers' toughest challenges. GE Automation & Controls is a business unit within GE Energy Connections.
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
Financial Relationship Specialist - Winder - 20 Hours Weekly
Thank you for your interest in a career at Regions. At Regions, we believe associates deserve more than just a job. We believe in offering performance-driven individuals a place where they can build a career --- a place to expect more opportunities. If you are focused on results, dedicated to quality, strength and integrity, and possess the drive to succeed, then we are your employer of choice.
Regions is dedicated to taking appropriate steps to safeguard and protect private and personally identifiable information you submit. The information that you submit will be collected and reviewed by associates, consultants, and vendors of Regions in order to evaluate your qualifications and experience for job opportunities and will not be used for marketing purposes, sold, or shared outside of Regions unless required by law. Such information will be stored for a set period of time. You may review, modify, or update your information by visiting and logging into the careers section of the system.
This position offers an exciting opportunity for candidates with prior Teller, limited banking, or some retail sales experience who are interested in beginning a career with opportunities for growth, development and upward mobility.
At Regions our mission is to make life better for our customers and communities. The purpose of this role is to create meaningful personal connections with customers, identify ways for Regions to meet customer needs, and assist in resolving end to end customer sales and service inquiries. Financial Relationship Specialists are responsible for providing an exceptional customer experience and contribute to improving the financial wellness of our customers.
The successful candidate should be ambitious and adaptable with a desire to educate customers on the ability to bank when, where, and how they want. This requires an individual who is motivated by a fast paced and energetic environment, with the ability to provide personalized customer service.
Provides a consistent optimal customer experience, primarily handling customers' transactional needs, including but not limited to performing teller activities such as deposits, withdrawals, payments, and balancing
Answers customer inquiries regarding products and services, fulfills basic servicing requests, and opens basic Consumer products such as checking and savings accounts
Works to create and establish relationships with customers, remaining well-informed about the customer's relationship with the bank
Educates customers on standard consumer products, emerging bank technology and digital solutions such as mobile, online, and ATM offerings, all designed to make banking easier
Assists branch and fellow team members with achieving goals by assisting with basic tasks to aid in customer problem resolution
Refers customers to an internal team of experts when more complex financial goals and needs are recognized
Achieves required levels of outbound phone calls using generated customer and prospect lead lists to educate customers on emerging technology and assist with meeting their financial needs
Ensures safe and sound banking practices, including adherence to all applicable laws and regulations
This position requires the tracking of time and is eligible for overtime under the non-exempt FLSA classification for hours worked in excess of 40 per week.
This position is incentive eligible.
- High school diploma or GED
Skills & Qualifications:
Ability to assist customers with digital banking offerings
Strong customer focus
Ability to handle multiple priorities simultaneously
- 1-2 years prior banking, sales, and/or customer service experience
- 2+ years prior cash handling or Teller experience
Hair Stylist - Winder Walmart Center
Winder Walmart Center
444 Atlanta Hwy Ste 200
Winder, GA 30680
Dish Machine Operator (Dmo)/Utility - Winder - #5189
The Dish Machine Operator (DMO)/Utility is responsible for maintaining the cleanliness and sanitation of all glassware, tableware, and cooking utensils/vessels by using both mechanical and manual cleaning methods in accordance with Ruby Tuesday standards. DMO/Utility communicates with and supports the Garden Bar Specialist to ensure the Garden Bar is always 100% stocked. Breaks down the Garden Bar and dish machine area following Ruby Tuesday procedures
ESSENTIAL DUTIES AND RESPONSIBILITIES
Maintain a gracious, pleasant and friendly attitude, while contributing to a teamwork-based work environment.
Take pride in his/her appearance while adhering to the Ruby Tuesday Dress & Appearance Policy.
Follow all safety and sanitation guidelines at all times.
Rinse, wash, sort, and stack glassware, tableware, and cooking utensils/vessels by using both mechanical and manual cleaning methods; return dishes and cooking utensils/vessels to the line or the proper storage location.
Set up, maintain, and break down the garden bar and dish area, including assembling/ disassembling the dish machine.
Support the Garden Bar Specialist by preparing items for service for garden bar according to specifications.
Wash and clean fruit and vegetables for peeling, dicing, shredding, or slicing using kitchen hand-utensils and electric equipment.
Measure and assemble ingredients and cooked items according to Ruby Tuesday recipes and menu specifications.
Ensure the highest quality preparation and presentation of food items served on the garden bar.
Complete specific cleaning responsibilities and station maintenance including, but not limited to, the walk-in refrigeration, prep, and dry storage areas.
Dispose of trash and debris according to Ruby Tuesday procedures.
Maintain clean, stocked, and sanitary restrooms through regular restroom checks.
Clean and maintain the cleanliness of carpeted and non-carpeted floors according to Ruby Tuesday standards and procedures.
Clean, roll, and unroll kitchen mats.
Sweep up trash around exterior of restaurant. Deck scrub walk ways and back dock area.
Responsible for the set-up, cleanliness, and organization of the work area before, during, and after every shift.
Position requires slip-resistant shoes.
EDUCACION Y/O EXPERIENCIA
Es preferible tener Diploma de la Escuela Secundaria o Equivalencia de la Escuela Secundaria.
Esta posicion requiere asistencia regular; requiere la habilidad de estar parado o estar caminando por varias horas a la vez; frecuentemente requiere oir, hablar, caminar, gatear, trepar, estar parado, tener que alcanzar, doblarse, mantener balance, arrodillarse, agacharse, levantar y transportar objetos de hasta 50 libras de peso, requiere la habilidad de tolerar cambios de temperatura significativos y la frecuente inmersion de las manos en agua y/o en soluciones para sanitizar. Habilidades especificas de vision requeridas para este trabajo incluyen vision de cerca, vision de lejos, vision de color, vision periferica, percepcion de profundidad y la habilidad de ajustar el enfoque.
Nota: La descripcion del trabajo refleja la asignacion de las funciones esenciales de la posicion actualmente, pero no prescribe o restringe tareas que puedan ser asignadas. Las funciones esenciales estan especificadas, pero estan sujetas a cambio en cualquier momento por varias razones. Incluyendo discrecion gerencial.
Coil Winder (2Nd Shift) (Req_Ut_180116)
Under limited supervision, winds coils used as electronic components according to work order, using coil-winding machines and hand tools. May set up and operate automatic or manual production machines and equipment, such as spot welder, pin threader, lathe and coil winder, to wind and pin to coil weld according to work orders and specifications.
Reads and interprets work orders, engineering specifications to determine machine setup, production methods, and sequence of operation.
Positions and clamps stops and guides; sets up and operates variety of machine tools.
Threads end of wire from reel through tension device, guides, and spreader bends wire ends to form lead, and attaches lead to coil core.
Starts machine and manually feed wire over coil core or spreader even and uniform winding and shape of coil; cuts wire to form leads, using wire or bolt cutters; uses magnifying glass for fine gauge wires.
Selects, positions, and secures the pin to coil weld using measuring devices and hand tools.
Welds together metal parts, components, or structures.
Inspects or measures work, using rule, gauges, and templates.
Observes machine operations, material supplies, and position of work pieces to detect malfunctions, needed supplies, or misaligned parts; may operate up to six different machines.
Performs routine preventative maintenance on machines as scheduled and required for TPM.
Works individually and as a team to develop and implement quality and efficiency improvements.
Conducts tests and inspections of products, or processes to evaluate quality or performance; examines products or work to verify conformance to specifications.
May be required to cross train and demonstrate competency on all essential job functions of the department working at different work stations as production needs require.
Establishing and maintaining interpersonal relationships; training and teaching others.
Maintenance of a clean and orderly work area free of excess materials.
Support of and involvement in company, department, and/or safety policies, procedures, programs and activities.
High school diploma or general education degree (GED); with six months to one year related experience and/or training; or equivalent combination of education and experience with production processes, machines and/or tools.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, proportions and decimals. Ability and understanding of various measuring devices in meeting drawing dimensions and specifications.
Ability to read and interpret documents such as blueprints, work orders, work instructions, diagrams, safety rules, operating and maintenance instructions, and procedure manuals. Good verbal and written communication skills are necessary.
Work requires continual attention to detail in follow through, establishing priorities and meeting deadlines.
Master Fabricator Winder - 2Nd Shift
Master Fabricator Winder
- 2nd Shift: Must possess the skill and knowledge to efficiently perform, on a continuing basis, complex work assignments and tasks which require a thorough understanding and use of written processes, specialized machinery, equipment and precision measuring devices.
The following is a current listing of complex work assignments and tasks that this job classification performs: Setup and operate numerically controlled winders for production purposes. This listing is not intended to be all inclusive and may be modified to include work assignments and tasks of comparable complexity that are performed in connection with existing or new programs.
Employees assigned to this job classification normally perform one or more of the complex work assignments and tasks. It is understood that employees in the Fabricator classification can be assigned to assist Master Fabricators and act at their instruction. Performs general housekeeping and janitorial duties throughout the plant and miscellaneous duties as assigned.
General Dynamics is an Equal Opportunity/Affirmative Action Employer
- Minorities/Females/Protected Veterans/DisabledContact Information
General Dynamics Ordnance and Tactical Systems provides reliable and affordable composite products to the defense and commercial aerospace markets. With more than 50 years of expertise, General Dynamics designs, develops, manufactures and tests a full range of composite missile and space structures, including rocket motors, pressure vessels, launch tubes and fuel tanks.
To setup and operate winding machines and wind a variety of small and medium size power and specialty transformer coils.
1.Works from engineering drawings, specifications, design prints, and manufacturing practices.
2.Setups winding machines and expandable mandrels.
3.Brazes copper leads.
4.Winds single and multi-conductor disc, single and double helix, and layer windings including rectangle, barrel, and elliptical forms.
6.Recognizes conductor pressure points and how to insulate these areas.
7.Builds winding bridges and risers used in disc windings.
8.Refers to manufacturing practices, standard practices, winding prints and bills of material to interpret and obtain the winding form size, conductor size, turns, layers, tape, glue, insulation and dimensions to name a few key items.
9.Adjusts and maintains conductor tension in order to meet coil dimension requirements.
10. Recognizes conductor and winding defects in order to take corrective action including notifying a supervisor as needed.
11. Repairs coils of any type and size at various stages of manufacture and in certain field situations.
12. Provides assistance to the supervisor in on-the-job orientation and training of other employees as well as helps out in other work centers on a temporary basis.
Based in Charlotte, North Carolina, SPX Corporation is a leading supplier of highly engineered HVAC products, detection and measurement technologies and power equipment. With operations in about 20 countries, SPX Corporation has approximately $2 billion in annual revenue and approximately 6,000 employees worldwide. SPX Corporation is listed on the New York Stock Exchange under the ticker symbol, "SPXC". For more information, please visit www.spx.com.
SPX is an equal opportunity employer and makes employment decisions without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, genetic information, disability, protected veteran status, or any other reason prohibited by applicable law.
Thank you for your interest in our company.
Wire Winder – Industrial Equipment
Responsible for the wire winding of complex machinery assemblies as well as other assignments in the factory as needed to support the achievement of the business goals and objectives.
Looking for someone with great work ethic, high energy, positive attitude and very detail oriented (due to quality requirements).
In this role you need to perform:
Operation of wire winding machine process.
Consistent use of basic metrology equipment (calipers, micrometers, etc.) to take precise measurements.
Adhering to quality control directives.
Operation overhead cranes, forklifts and scissor lifts.
Work with engineering/manufacturing teams to resolve issues and optimize processes.
SKILLS AND KNOWLEDGE:
Associates degree in electro-mechanical, Trade school diploma in industrial maintenance or similar applicable field experience.
5+ years' experience assembling electro-mechanical equipment / machinery.
Experience on industrial and/or machine tool equipment with strong attention to quality at tight tolerances.
Blueprint reading, machine shop skills.
Basic computer skills – data entry.
Avure Technologies manufactures High Pressure Processing (HPP) equipment that helps producers increase food safety and extend shelf life, while providing consumers with nutritious, natural food. One of the fastest and most reliable systems, Avure equipment is used to treat the majority of all HPP-protected food around the world. Food manufacturers of all sizes, including the world's largest poultry producer, rely on Avure's HPP technology to serve up healthy, delicious and safe products, doubling and tripling shelf life without chemicals, additives or heat. In fact, you'll find foods processed by Avure HPP systems in every corner of the world. It's an exciting time at Avure. We may be the global leader in HPP, but we believe our greatest accomplishments and innovations lie ahead. That's why we're always searching for passionate, analytical, entrepreneurial and top-notch talent to help us achieve our goal of advancing the field of HPP even further. For immediate consideration, email your resume to: firstname.lastname@example.org. EOE
AN EQUAL OPPORTUNITY EMPLOYER
It is the policy of JBT Corporation to provide equal opportunity for qualified persons and not to discriminate against any applicant for employment because of race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, citizenship, or any other characteristic protected by federal, state or local law at the JBT Corporation location to which this application is submitted. In addition, as a Federal Government contractor, JBT Corporation is an affirmative action employer. If you require accommodation during the application process, please contact the local Human Resources department. EOE-Females/Minorities/Protected Veterans/Individuals with Disabilities
If you have a disability or impairment that prevents you from completing the online application, please seek the assistance of your local employment services agency. JBT maintains active relationships with local employment services agencies, and they have pledged their support in assisting any applicant needing help in applying. To find information on agencies throughout the United States, please go to www.careeronestop.org
You may also call Megan Meagrow at 844-286-4524 if your disability or impairment prevents you from applying online. NOTE: Do not use this number unless you need assistance because of a disability or impairment. The personnel attending this phone line will not be able to give you a status update regarding your application and will not be the individuals making a decision regarding your employment.
[DE1]THIS EEO STATEMENT MUST BE INCLUDED AT THE END OF EVERY JOB AD WE POST – FEDERAL LAW REQUIREMENT.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!