Forming Roll Operator I Job Description Sample
Staked Forming Operator - B Shift
Job Description: SummaryGrade: H09
Repair and adjust production equipment to produce parts which conform to quality specifications, at specified output rates. Routinely troubleshoot equipment including dismantling and reassembling machine components.
Perform changeovers, line clearance and cleaning. Work as a team with peers for maximum effectiveness in assigned tasks to maintain a production rate equal to or greater than the established standards. Responsible for product quality inspections, operating equipment, raw material/finished goods movement, and cleaning/sanitizing.
Regular, punctual attendance is an essential job function. Ensures compliance with BD quality systems, policies, procedures and practices and all local, state, federal and BD safety regulations, policies and procedures.
1.Informal leader for respective line.
2.Communicate on a daily basis with prior and post shift associates regarding technical and other pertinent issues.
3.Set-up machines per established procedures, to manufacture product which conforms to quality specifications, at the rated output.
4.Repair, adjust and troubleshoot machinery including dismantling, replacement of machine components and reassembling.
5.Work with technical support until machine issue is resolved.
6.Continually monitor operations for product quality and equipment performance, including QC lot acceptance rate.
7.Monitor process parameters and take appropriate action.
8.Perform quality inspections and quality monitoring.
9.Record accurate inspection and production data as required.
10. Maintain equipment according to the preventative maintenance schedule.
11. Perform all product changeovers.
12. Perform changeover of all modules, including camera vision system.
13. Keep equipment supplied with components and material necessary to sustain continuous operation, including placement of finished components into appropriate locations.
14. Assign associates to alternate tasks as needed. Instruct associates on proper job methods and follow-up to be certain the instructions are understood and followed.
15. Assist technical staff on machine modifications/testing, equipment validations.
16. Responsible to contribute to the continuous improvement of the process.
17. Other duties as assigned.
High quality products produced per manufacturing documents.
Efficient equipment operation.
Continuous flow of product to SCF.
High School Diploma/GED
Primary Work LocationUSA NE - Columbus (East)
Forming Machine Operator 3Rd Shift - Hazleton, PA
About WestRock (NYSE: WRK) partners with our customers to provide differentiated paper and packaging solutions that help them win in the marketplace. WestRock’s 45,000 team members support customers around the world from more than 300 operating and business locations spanning North America, South America, Europe, Asia and Australia. Learn more at www.westrock.com.
Forming Machine Operator 3rd Shift - Hazleton, PA33 North Powell DriveHazleton, Pennsylvania, 18201United States The Opportunity:We have an opportunity for a Forming Machine Operator at our Hazleton,PA, folding carton plant. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Observe machine operation to ensure quality and conformity of package material.• Package product in proper containers. • Inspect and remove defective product from production line.• Stop machine when malfunction occur and report immediate to mechanics or supervisor.• Stamp finished good product with packer ID number.• The ability to pack sleeved product into corrugated case, seal (tape) and stack on a pallet. • Perform housekeeping duties to insure department and company standards are maintained.• Performs other related duties to contribute to the success of the operation as assigned by lead person and supervisor. JOB SPECIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the Knowledge, Skill, and Abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION/EXPERIENCE: High School graduate or G.E.D. MATHEMATICAL SKILLS: Basic Math skills required. MECHANICAL SKILLS: Basic understanding of Machinery & processes. COMMUNICATION SKILLS: Ability to read, write & understand basic English. Able to communicate effectively, get along with coworkers & management and deal effectively & professionally under pressure.REASONING ABILITY: Job requires making decisions based on established guidelines regarding running or shutting down on defective work and operational problems/difficulties of all kinds.ATTENDANCE: Accrued attendance points must be below 5.PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Minimal 8 hr shift schedule with some overtime.• Occasional overhead lifting required. (20 to 40 lbs up to 20 times a hour)• Required to stand & walk continually. • Frequently lifting, pushing, and/or pulling 20 to 40 lbs. (Up to 20 times a hour)• Frequently bending, stooping, kneeling & reaching. (Up to 20 times a hour) What we offer:Corporate culture based on integrity, respect, accountability and excellence
Comprehensive training with numerous learning and development opportunities
An attractive salary reflecting skills, competencies and potentialA career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. #PA*CBWRK WestRock Company is an Equal Opportunity Employer committed to creating and maintaining a diverse workforce: Minorities/Females/ Disabled/Veterans.
Metal Forming Machine Operator Supervisor
This position is located in the Coining Division of the US Mint, San Francisco CA and supervises a staff of subordinate employees in the overall production of numismatic items (i.e. commemorative coins, sets, and medals) utilizing all aspects of coin production. This consists of stamping, milling, cleaning, commemorative coin sets, labeling, packaging, shipping and receiving, mailing of all special coins and medals, and assess control.
Learn more about this agency
All candidates who are:
Current or former federal employees qualifying as Status Candidates, Federal employees currently serving on a VRA, VEOA eligibles, CTAP/ICTAP eligibles, eligible for special hiring authorities (e.g., the Schedule A appointment for persons with disabilities, or covered by an Interchange Agreement) OR
3.Land Management employees eligible under Public Law 114-47.
If you do not meet any of the categories listed above, you may wish to apply under announcement 19-MINT-2-P, which is open for any U.S. citizen to apply. Please refer to that announcement for details on open period, eligibility, and how to apply.
As a Metal Forming Machine Operator Supervisor, you will:
Plan and schedule equipment, manpower and material requirements on a daily or weekly basis to meet production goals.
Exercise thorough knowledge of the press operations to include ability to recognize operational activities and processes, machines used, materials, parts, tools, etc. in accomplishing the following.
Establish internal guidelines for all phases of the un-circulated coins, commemorative coins and medals process.
Responsible for the quality of stamped and packaged coins medals.
Occasional travel - 1 - 5 nights per month.
Job family (Series)
3869 Metal Forming Machine Operating
HelpRequirements Conditions of Employment
Must be U.S. Citizens or U.S. Nationals
Please refer to "Conditions of Employment."
Click "Print Preview" to review the entire announcement before applying.
You must show in your experience in the online application that you possess the knowledge, skill and abilities to perform the duties of the position. You must meet the screen-out element Ability to Lead or Supervise, normally addressed at the beginning of the online questions. In addition, you must also obtain an average score of two (2) on all other elements for this position as addressed through the online question in order to be considered minimally qualified.
The experience may have been gained in either the public or private sector or volunteer service. Be sure all experience is documented in your resume by indicating place of employment, job title, length of time performing the duties, and the name and contact information for the supervisor. We must be able to verify this experience in your resume in order for you to receive credit.
You must meet the following requirements within 14 days of the closing date of this announcement.
Forming Machine Operator
Our client is seeking a temp-to-hire Forming Machine Operator in Berthoud, CO.
· Operates forming machinery.
· Loads and unloads mold forming fixtures and parts.
· Uses router and/or band saw to trim parts.
· Cleans workstation using broom and dustpan and/or compressed air.
· Accurately read, record and use calipers, height gauges, pin devices, vernier calipers, and micrometers.
•Manufacturing and material handling experience preferred
•Forklift experience a plus
The Good Stuff:
- Full benefit package upon conversion
- First Shift with overtime potential on Fridays
- $13/hour to start, $14/hour at 90 days and $15/hour at 6 months, depending on performance
Machine Operator - Forming
This position is for Pactiv, a company of Reynolds Group Holding Inc.
- Are you mechanically inclined? Do you enjoy troubleshooting?*
Come Grow with Pactiv
Consistently and safely operates machines at or above standard levels of operation including waste, quality, efficiency and utilization.
Trouble shoot, identify and correct machine related problems through proper adjustments to various parts of the machine.
Provide innovative solutions for production issues.
Provides support and guidance to less experienced personnel.
Completes appropriate end of shift paperwork, accounting for crewing time, machine time, and production quantities.
Able to inspect and recognize defective product and make machine adjustments to correct cause of defects.
Observes all housekeeping, standard work and safety guidelines.
Mechanical aptitude, demonstrated problem solving skills and effective communication skills - written and verbal are required.
At Pactiv, continuous innovation and development has secured our place as one of the world's largest manufacturers and distributors of foodservice and food packaging products. Pactiv currently produces custom and stock foam, plastic, aluminum, pressed-paperboard, PE coated board, and molded-fiber packaging. Our global force of almost 12,000 team members allows us to supply packers, processors, supermarkets, restaurants, institutions and foodservice industries around the world. Over the years, Pactiv has consistently outpaced the competition in safety, innovation and strategic acquisitions. Want to learn more? Visit www.Pactiv.com.
Pactiv is an Equal Opportunity Employer EEO AA M/F/Vet/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans status, or any other characteristics protected by law. "IND1P" #ZR
Thread Roll Operator
Illinois Tool Works Inc. (NYSE: ITW) is a diversified manufacturing company that delivers specialized expertise, innovative thinking and value-added products to meet critical customer needs in a variety of industries. ITW, with approximately 18 billion dollars
in global revenues, operates 8 major segments with businesses in 56 countries that employ approximately 51,000 women and men. These talented individuals, many of whom have specialized engineering or scientific expertise, contribute to our global leadership
in innovation. We are proud of our broad portfolio of more than 10,000 active patents.
ITW Shakeproof Industrial Group is a leading designer and manufacturer of value added, high quality engineered hardware solutions looking for entry-level or skilled individuals to join our team!
- Known as ITW Shakeproof Group today, the company is the result of a 2010 merger of ITW businesses that have a long, rich history in the industrial hardware market. This history dates back to the 1920s, when two of ITW Shakeproof Group's main product lines
Shakeproof was formed in 1923 when it introduced the Twisted Tooth Lock Washer.
Bee Leitzke, established in 1929, was created through the merger of well-known hardware manufacturers Medalist Rein Leitzke and Hobbs.
Together, these companies have decades of problem solving, product design and manufacturing experience which is demonstrated in the quality of the products you purchase.
Through continued focus on new product development, ITW Shakeproof Group remains a design leader in cross-market, single customer and cost reducing innovations.
This innovation focus has resulted in better, faster and easier solutions for our customers and for the end user.
As you visit the various sections of our website, you will see the innovations that, through the years, have become industry standards:
The BosScrew® was created for plastic applications; the Tap/R® as a thread forming screw, and the Cyclone® for sheet metal applications. Our most recent innovation, the Shakeproof Thread®, integrates a wave thread that, in application, creates a mechanical
interference ensuring the fastener simply stays tight. These threaded products are utilized in many applications in the Appliance, Trailer, Electrical, Heavy Truck and Rail markets.
Our Helical Lock Washers, Internal and External Lock Washers, Crest Cups, and Square Cones were developed as anti-loosening devices for a variety of applications in the Railroad, Industrial Equipment, Automotive, and OEM Screw markets.
Our Cotter, Clevis and Lock Pins were designed to secure equipment in the Agriculture, Outdoor Power, Snowplow and Pole Line markets.
These individuals will set up and operate thread rolling machines and auxiliary equipment to produce high quality fasteners while meeting on-time delivery, productivity, safety, quality, and housekeeping metrics.
Set-up thread rolling machines and auxiliary equipment (including vibratory feeders, ZEBRA equipment, and process monitors) per drawings and specifications.
Operate thread rolling machines and auxiliary equipment.
Perform daily maintenance on thread rolling machines and auxiliary equipment.
Perform quality checks and document (where applicable), using simple gages, precision measuring devices and visual inspection.
Perform safety checks to ensure safety devices are on and in working order (guarding and all safety equipment). Use proper Lock Out Tag Out procedures.
Manually handle parts from work-in-process containers to shipping containers. Move containers as required using pallet jacks and/or fork trucks.
Prepare and maintain accurate records (route sheets and count sheets).
Clean equipment and keep work area neat and orderly.
Participate as a Trainer when necessary.
To work in any other area of the plant by the request of your supervisor.
Usual manufacturing environment with regular exposures to noise and oils.. Moderate to high physical activity, involving routine lifting and pulling. Intermittent cold and hot temperatures.
Past Experience operating machinery, preferred
Knowledge and basic computer operation ability
Strong mechanical aptitude
Ability to add, subtract, multiply, and divide all units of measure and compute ratios and percentages
Ability to read and interpret documents such as safety rules, operating, and maintenance instructions, and procedure manuals
Ability to complete routine production and quality reports
Ability to lift up to 25 pounds
Understanding and compliance with safety rules and regulations
Strong verbal and written communication skills
We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected
Roll Grind Operator
Creating Long-Term Value Thru Relentless Innovation®
ATI is a global manufacturer of technically advanced specialty materials and complex components. Our products support diverse markets and industries such as aerospace and defense, oil & gas, electrical energy, medical, automotive, and other industrial markets.
ATI is a global manufacturer of technically advanced specialty materials and complex components. Our products support diverse markets and industries such as aerospace and defense, oil & gas, electrical energy, medical, automotive, and other industrial markets.
We are currently seeking Roll Grinder Operator at our Brackenridge Operations in Brackenridge, PA. Roll Grinder Operator is responsible for heavy assembly and regrinding of various size mill rolls, both for a Finishing and Hot Mill application.
Duties to include:
Calibrate test equipment and maintain both written and automated database records.
Perform mechanical repair of roll grinding machines and equipment
Select, mount and install grinding wheels on various machines
Utilize both radio controlled overhead cranes and jib cranes to:
Move rolls and assemblies in/out of the machines as needed
Move rolls about the shop to support mill operations
Load & unload trucks as needed
Rough turn and finish grind rolls to exact shape, finish and tolerances on various machines
Check roll surface quality for:
Roughness using hand held perthometer
Hardness using hand held hardness tester, and understand the various scaling systems and be able to correlate readings from one scale to another using charts and graphs
Roll diameter using hand held micrometer, Pi-tape, or automated caliper inspection system, using both metric and imperial micrometers and equipment
Roll shape using saddle micrometer or automated caliper inspection system
Visual inspection of roll surface to identify chatter or wheel marks.
Ability to read and interpret sketches and blueprints, in both metric and imperial units of measurement.
Adjust, lubricate and maintain Roll Grinder machines and equipment as needed
Record final roll grinding information either manually or with automated recording system
Calibrate & troubleshoot roll grinding machines as needed to bring them back on line
Operate fork trucks and various equipment to move large items as needed
Understand and able to fluently work with the metric system and convert back and forth to imperial units as needed.
Must be detail oriented and focused on accuracy to ensure roll surface characteristics are correct.
Allegheny Technologies Incorporated and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected by federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.
ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.
High school graduate or equivalent
Graduate of an approved apprentice program or technical school with the attainment of Journeyman's papers in General Machining or Tool & Die trades.
Minimum equivalent and verifiable experience of three years working as a Roll Grinder, Machinist, or Tool & Die trades operating both manual & automated machines
Must pass a mechanical aptitude test & be able to lift 50 lbs
Area of Interest
Manufacturing / Production / Operations
Roll Thread Operator 2Nd
This threading machine operator position involves learning to perform the operation of manufacturing equipment under appropriate supervision. The operator will be responsible for learning the skills necessary to maintain production requirements and quality standards.
Follow all safety rules.
Maintain clean, orderly work area
Operate machinery as needed, which will include emptying pans, inspecting/gaging parts, making minor mechanical adjustments.
Where applicable, learn to perform minor machine set-up skills; including, but not limited to, tooling changes and first piece inspection.
Record data for SPC, TS16949 documentation.
Move material by operating forklift or using non-motorized devices.
Perform minor machine maintenance such as oil changes and tightening of bolts.
All other duties as assigned by the supervisor or leadperson.
Must be available to work overtime as needed.
Required Skills and Knowledge:
High school diploma or GED equivalent.
Education/training in basic math for blueprint reading, gaging, SPC.
Ability to learn computer operation/data entry.
Basic mechanical aptitude to learn machine operation skills and develop an understanding of the manufacturing process.
Ability to identify basic problems.
Ability to visualize and understand the manufacturing process.
Good communication and teamwork skills.
Ability to legibly complete sign-offs and record data for TS16949.
Must possess the ability to learn and comply with all company policies and procedures, including safety guidelines and practices.
Knowledge in TS16949 and ISO14001 requirements.
Preferred Skills & Abilities
Previous manufacturing experience.
Previous machine set-up/operating experience.
Ability to read gages, micrometers and blue prints.
Forklift operation/material-handling experience.
Who we are:
Remember the last time you opened a bottle of champagne, a cold beer after a hard day's work or a bottle of sparkling mineral water to quench the thirst, well it was probably made by us, we are O-I and we love that we make more glass containers than anyone in the world.
O-I has more than a century of experience crafting pure, sustainable, brand-building glass packaging for many of the world's best-known food and beverage brands. We are proud to provide high quality glass packaging for beer, wine, spirits, food, non-alcoholic beverages, cosmetics and pharmaceuticals.
With nearly 27,000 employees and an unparalleled footprint spanning almost 80 plants in 23 countries, O-I is a truly global maker of glass packaging.
From engineering and manufacturing to brand development, design and innovation, we are dedicated to providing unique solutions to exceed our customers' expectations and fuel consumers' desire for glass.
As the Forming Specialist you will be responsible for providing technical forming process support as part of the GEME projects. You will be working independently and as part of larger teams. In this role, your projects will include leading commissioning/startup of new machines, process trials as well as technical leadership to improve performance on low performing lines/jobs.
In this position you will be responsible for performing technical duties and developing techniques to correct low efficiency jobs and to correct hot end operating defects. You will have a broad responsibility of improving overall production efficiencies. In this role,you will be responsible for mentoring and developing plant personnel and less experienced team members.
Provides technical assistance on a diverse range of operating
Investigates low efficiency jobs to determine cause of poor performance
Analyzes blank and mould design, operating temperatures, machine set up, bottle handling equipment, lehr operations, etc. and makes appropriate recommendations
Makes inspections of forehearth, feeders, hot end bottle equipment, etc.
Makes or directs making of necessary adjustments
Concentrates efforts on machines with poorest quality and production although attempts to maintain all equipment within good working range
Supports, and leads at times, global initiatives (i.e. Manufacturing Fundamentals)
Actively participates on Forming Global Technical Network
Works closely with mould and IS Machine teams, Quality, Batch and Furnace in recommending changes in bottle design, redesign of equipment, etc.
Gives technical advice and assistance on job change processes and procedures
Provides mentoring and training of junior team members as well as plant personnel
Facilitate and lead forming trials for job improvement
Keeps abreast of current trends in technology and processes to ensure an efficient operation
Accountable for the safety of personnel within the plant
Ensures correct use of safety equipment and that company safety policies are followed
Investigates all accidents or safety incidents within the plant, ensuring proper "root cause analysis" to provide remedial action to prevent reoccurrence
Participate and support best cost design developments, improvements or opportunities
Lead new Glass Container Machine equipment installation, major repairs and/or upgrades to licensee plants. Support on-site activities as required, attending project meetings, reporting on project status and issues, maintaining communication with contractors to effectively execute project tasks
This position reports to the Forming Operations Discipline Leader.
EDUCATION AND EXPERIENCE
High School education, required
Associates Degree or higher in Mechanical or Industrial Engineering, desired
Minimum 20 years of experience in Glass Forming related jobs, required
Forming Operator, Shift Supervisor/Line Leader experience, required
Production Manager/Unit Plant Manager (UPM) experience, required
Proficient English language, required
Lean Six Sigma (LSS) certification, desired
MS Office (i.e. Word, Excel, and PowerPoint) skills, required
Analysis – Understand and resolve problems
Adapting and Learning – Readily adapt
Innovation – Improve Processes
Manage execution – Manage the work effectively
Collaboration – Team membership
Results orientation – Show initiative and commitment
What We Offer:
Opportunity for future growth and advancement
Generous, Award-winning 401(k) plan w/ employer contribution & match
Half Day Fridays (during U.S. daylight savings time from April 6 until Nov. 2)
Comprehensive benefits package
Relaxed and contemporary dress code
Education Assistance program
Adoption Assistance program
and much more…
If you are smart, passionate, innovative, culturally open, curious and collaborative, we'd like to hear from you.
O-I is committed to fostering an inclusive environment that attracts and embraces the brightest minds and creates a culture that welcomes a diversity of ideas and perspectives while encouraging growth and rewarding performance.
Must be able to perform the essential functions of the job with or without reasonable accommodations.
Must be authorized to work in the U.S. on a full-time basis.
O-I is an Equal Opportunity Employer, and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please contact O-I at firstname.lastname@example.org and let us know the nature of your request and your contact information.
O-I is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please contact O-I at email@example.com and let us know the nature of your request and your contact information.
Why join us? Corelle Brands is home to iconic, category-leading brands, including Corelle®, Pyrex®, Corningware®, Snapware® and Chicago Cutlery®. We're passionate about delivering products that facilitate the joy our customers find in cooking and sharing food with family and friends. Our continuous focus on growth and innovation means you will become part of a company that offers challenging opportunities, rewards excellence, and combines your individual expertise to achieve a higher level of shared success. Join Corelle Brands and become a part of our story.
Supervise all activities and personnel on a rotating shift in the forming area of the Hot End. Interface with all sister departments to ensure optimal performance per the Pressware Safety, Quality and Manufacturing standards.
Plan & direct production efforts including tooling changes, safety improvements, process actions, etc. to obtain / maintain safe efficient operations
Responsible to maintain / seek improvement of production selects and quality, based on real time performance. Set maintenance priorities on off shifts
Maintain accurate / detailed log book entries of production activities within shifts. Responsible for employee time keeping, attendance records, overtime lists and reconcile production reports
Sustain constant dialog with cross functional departments to utilize glass consumption, minimize category losses, and reduce equipment downtime.
Enforce all plant safety rules and plant policies. Perform Safety audits and process audits to ensure strict adherence
Observe / evaluate Apprentice Forming operators and provide constructive written evaluations.
Ensure Apprentice operators are receiving required training
Understand and follow an established collective bargaining agreement
Bachelor's Degree in Engineering or Other Technically Related Degree / Business Management/ Minimum 2+ years of supervisory experience. Leading a unionized team is a plus
Effectively leads by example and has the confidence to lead a team
EEO Corelle Brands participates in E-Verify
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!