Foundry Worker General Job Description Sample
Foundry Worker - Weekend/Off Shift
This position is responsible for de-waxing molds and removing un-needed pieces from molds.
ENVIRONMENTAL HEALTH & SAFETY RESPONSIBILITIES
Expected to assist in the implementation of ARCONIC's EHS value and policy statement and its accompanying principles.
Comply with all department, facility, Corporate and Regulatory EH&S regulations.
Wear all required personal protective equipment.
Report all job related illness and injuries. (Per employee handbook).
Report all Safety, Health & Environmental concerns to your supervisor in a timely manner.
Attend all EH&S training.
Removes hardware from molds, loads and unloads autoclave & continuous Dewax oven.
Operates attendant equipment.
Transports materials and molds as required.
Maintains a clean and safe working area.
Cleans and prepares hardware for wax assembly.
Will perform other duties as assigned by supervisor.
Maintains accurate and up-to-date records or molds processed.
Perform mold inspection/Boroscope operation.
PHYSICAL DEMANDS/EQUIPMENT USED
Requires occasional lifting of up to 25 pounds
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as U.S. citizen, U.S. permanent resident (i.e. 'Green Card Holder'), political asylee, or refugee.
No relocation benefit is offered for this position. Candidates residing within a 50 miles radius of Dover NJ will only be considered.
High School diploma or GED from an accredited institution
Aluminum Foundry Worker - Swings
Reports Directly To: Melt and Breakdown Supervisor
Reports Indirectly To: QA Manager
Primary Function: Responsible for melting and pouring metal into ceramic molds to produce aluminum and steel castings.
Principle Duties and Responsibilities:
Prepares and handles supplied molds to ensure castings meet quality standards.
Preps molds per procedures (kaowool etc.).
Loads molds into ovens according to production requirements.
Preps metal for pouring (degas, chemical additions, etc.).
Pulls molds from ovens and delivers to appropriate pouring location.
Pours metal into molds according to procedures.
Records all information of temperatures and times for pours into computer.
Performs daily verifications on Spectrometer.
Places parts and/or test samples in Spectrometer to certify chemistry.
Confirms procedures are followed.
Ensures staging readiness of all pours.
Ensures chemistry of pours.
Maintains lot integrity.
Ensures paperwork is properly done.
Helps other areas as needed.
Minimum Job Requirements:
Able to work in a production environment.
Able to read and comprehend English.
Able to add and subtract two digit numbers and to multiply and divide with tens and 100s.
Able to lift and carry up to 50 lbs. continuously.
Able to lift and carry up to 75 lbs. occasionally.
Able to communicate effectively with co-workers.
Able to read, write and comprehend simple instructions, short correspondence, and memos.
(Foundry log, spectrometer reports, chemical analysis.)
- Able to apply common sense understanding to carry out instructions furnished in written, oral or
diagram form. Able to deal with problems involving several concrete variables in standardized
Able to complete OSHA forklift certification through GSC.
Near vision requirements are Jaeger J1 in one eye, at no less than 12 inches; or equivalent, or Jaeger J2
in one eye, at no less than 16 inches.
- Complies with company and departmental policies and procedures, including company's attendance
Able to meet individual productivity requirements.
Able to meet internal quality requirements.
May be required to take hazardous waste training.
- High school diploma or GED
Normal Working Conditions
- Works under indirect supervision following established practices and clear-cut policies in the
performance of the majority of duties. Makes decisions when general instructions, established
methods and clearly defined precedents indicate action to be taken, but refers unusual problems to
- Environmental conditions encountered continuously are fumes or airborne particles, and work near
moving, mechanical parts.
Environmental conditions encountered occasionally are working near or with hazardous waste.
Typical noise environment for the work environment of this job is Loud Noise. (Appropriate ear
protection is required.)
- Continuous required physical demands include standing, walking, using hands to handle or feel,
reaching below shoulder level, balancing, talking and hearing.
- Occasional required physical demands include driving, pushing or pulling.
The above statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all duties, responsibilities, and skills.
PCC Structurals is committed to a diverse workforce. As Equal Opportunity Employer, VEVRAA Federal Contractor, affirmative action employer we provide equal opportunity to all persons, regardless of race, religion, age, gender, disability, status as a protected veteran, national origin, color, or any other classification in accordance with federal, state, and local statutes, regulations and ordinances "Minority/Female/Disability/Veteran Status/VEVRAA Federal Contractor". Veterans are encouraged to self-identify as PCC Structurals desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA).
In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings. Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov
Precision Castparts Corp. is an equal opportunity employer committed to recruit, hire, train, and promote in all job categories without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status or other status protected by applicable law.
Bedford, OH Temp-to-Hire
07 - 129467 ge
This manufacturing company is offering an immediate, full-time position for a Foundry Worker. You will stack and band steel/metal ingots which weigh 25 pounds and perform continuous lifting.
This is a physical job working in a hot and dirty environment. Hours are Monday through Friday from 7 a.m. to 3:30 p.m.
Qualified candidates must have foundry experience, must not have any lifting restrictions, must have steel toed boots, must be in good shape with the ability to work in a hot and dirty environment, and must be dependable. Only candidates that can pass a background check and drug screen will be considered.
For an immediate interview, please call 216-706-7347
General Foundry / Trainee - 3Rd Shift (Bf)
Perform charge preparation and melt operations.
Set up and operate centrifugal casting machines to make a variety of castings to very close tolerances. Select, insert, position, check sizes and secure dies and cores as necessary. Mount, secure, clean and spray molds. Slag off and pour metal at proper temperature.
Responsible for adherence to melt and casting process through controls, measuring, documentation, etc. Offer recommendations for process improvements.
Participate in Pour Groups and other teams to improve all aspects of casting production.
Maintain clean, orderly, safe facilities.
Direct, assist, and train other operators and helpers as needed.
We are willing to train individuals with good mechanical aptitude, sound math skills and a history of dependability.
Prior centrifugal casting experience strongly preferred.
Must be able to follow written and verbal procedures.
Must be able to lift and carry 50 lbs.
Equal Opportunity Employer of Minorities, Females,
Protected Veterans and Individuals with Disabilities
Drug Free Workplace
Foundry General Labor
Title: Foundry General Labor
Business Unit: Viking Pump
406 State Street
Cedar Falls, Iowa, 50613-3343
Viking Pump, Inc. a Unit of IDEX Corporation is currently seeking qualified individuals for our Foundry General Labor opening. The selected candidate can expect to work at either our Alloy Foundry or Iron Foundry.
Work across the foundry processes to produce pumps with attention to quality and safety.
PRIMARY DUTIES AND RESPONSIBILITIES
Specific job assignments may vary depending on position availability. Qualified applicants may work across any of the following duties and responsibilities:
Follow the documented safety guidelines and procedures.
Adhere to quality expectations.
Make quality product to specification.
Operate relevant equipment according to job assignment.
High School diploma or equivalent required.
Experience in an industrial environment preferred.
Experience with hand tools preferred.
Welding experience preferred.
Forklift experience preferred.
OTHER SPECIAL REQUIREMENTS
- Ability to lift up to 35 pounds on a regular basis and up to 70 pounds on a periodic basis.
WORK ENVIRONMENT REQUIREMENTS
Ability to move within office and manufacturing complex, write by hand and keyboard.
Ability to communicate by speech and hearing via phone and in person.
General manufacturing, foundry, warehouse and office environment.
Ability to lift up to 35 pounds on a regular basis and up to 70 pounds on a periodic basis.
IDEX is an equal opportunity employer Minorities/Females/Protected Veterans/Disabled
REQ ID: 1628
Part-Time General Maintenance Worker I
- Assume the overall Janitorial duties of the maintenance department regarding the day-to-day, recurring, periodic or scheduled regular tasks. To preserve or restore the equipment or facility in such condition that they may be effectively utilized for their designated purposes and satisfy Regulatory Agencies, Management, Residents and Owners. The Janitorial-Housekeeping position is responsible for keeping the property in a safe condition and adhering to safety standards and operating equipment in a safe and responsible manner.
The primary responsibility is to keep the facilitys interior common areas clean and in orderly condition daily by sweeping and mopping floors, dusting and polish furniture, cleaning glass windows, and emptying trash containers.
Moving dumpsters for trash removal and cleaning trash rooms.
Overall cleaning of vacant apartments.
Setting up tables and chairs in community room for activities.
Other duties may include assisting Maintenance Worker II in performing maintenance activities on an as needed basis especially during apartment turnovers.
Additional Knowledge, Skills & Abilities
Ability to bend and stoop frequently.
Able to speak, write and understand English.
Must be sensitive to and respect cultural diversity and able to work with divers racial, ethnic and economic groups.
Flexible work schedule.
Excellent communication and listening skills.
Possess strong work ethics.
Adhere to the highest ethical standards, personally and professionally.
Successfully pass a FDLE Level II background screening.
Valid Florida drivers license and have reliable transportation.
Education & Experience:
Minimum of High School Diploma or GED from an institution accredited by the Department of Education.
1-year experience in a janitorial/housekeeping position.
Experience in routine maintenance activities.
Catholic Charities is an Equal Opportunity Employer that values the strength diversity brings to the workplace. EEO/AA/ADA Employer. Catholic Charities participates in the US E-Verify program.
General Utility Worker
Maintains assigned areas/departments in a clean and orderly condition.
1.May load and unload equipment from trucks
2.Check in and check out fleet units
3.Assist with minor repairs
4.Maintain organization of lot
5.May wash equipment
6.Operates appropriate powered cleaning equipment as required, potentially including a fork lift
7.Create and maintain good communications (verbally and in writing) and relationships with other Company departments, branches, employees, vendors, and customers by addressing and resolving concerns quickly
8.Cleans department/area as needed and required
9.Lifts, carries, pushes or pulls objects or supplies averaging 40 pounds
10. Keeps supervisor informed of inventory levels of janitorial supplies
11. Follow all work, safety rules, and procedures
12. Perform other duties as necessary and assigned
13. Required to work overtime if needed
Duties and Responsibilities include the following:
This position has no supervisory responsibilities.
Personal protective equipment and environment:
1.Safety glasses, steel-toe boots, safety vests, hard hats, etc., when appropriate or required per shop or customer site
2.Works with hazardous waste and receives Hazardous Waste Training every year
General Maintenence Worker (673-183)
The General Maintenance Worker performs general maintenance and repair of equipment and buildings requiring practical skill and knowledge (but not proficiency) in such trades as painting, carpentry, plumbing, masonry and electrical work.
Work involves a variety of the following duties: replacing electrical receptacles, wires, switches, fixtures, and motors, using plaster or compound to patch minor holes and cracks in walls and ceilings, repairing or replacing sinks, water coolers, and toilets, painting strictures and equipment; repairing or replacing concrete floors, steps, and sidewalks, replacing damaged paneling and floor tiles, hanging doors and installing door locks, replacing broken window panes, and performing general maintenance on equipment and machinery.
Must participate in on-call rotation
High School Diploma.
One year of experience in related field
General Maintenance/Carpentry Worker
DownEast Outfitters is looking for a candidate to fill a General Maintenance and Carpentry position, located out of our corporate offices in Salt Lake City, UT . Must be able to travel, to work flexible hours and possible weekends. This position will functionally report to the Facilities Manager.
We are looking for a strong individual who has general overall construction knowledge. Our ideal candidate is reliable, has computer skills, is willing to learn new items; is a team player with excellent communication and interpersonal skills; is willing and able to travel as business dictates; and conducts all work in a safe fashion
Performing general building maintenance duties as required, including framing, sheetrock and finish work
Performing a variety of semi-skilled and skilled carpentry, painting, plumbing and electrical activities associated with the maintenance and repair of facilities
Performing preventive maintenance
Conducting routine and periodic inspections in compliance with company, industry, and government standards
Operating a variety of hand and power tools; working with chemicals including cleaning products, solvents, glues, etc.
Working cooperatively and effectively with contractors and co-workers
Performing all other related work as required
Ability to make and keep schedules and track costs to stay within budget; produce daily reports
Ability to read and interpret Blueprints
Working within OSHA requirements; incorporating quality control with all maintenance work
Must be capable of operating heavy equipment
Must maintain a valid state driver license
Works inside and outside various weather conditions to include extreme cold or heat
Lifting, stooping, crawling, bending, carrying
Heavy lifting up to 75 lbs on a daily basis
General Warehouse Worker
What does a Best Buy General Warehouse Worker do?
As a General Warehouse Worker, you will facilitate moving product throughout the distribution center through use of equipment in areas such as Receiving, Stocking, Shipping, Non-Con, Order Processing and Replenishment. Your responsibilities will include operating equipment in a safe manner, while making sure that you are maintaining a safe and clean working area and ensuring that our product is in perfect condition to sell to our customers. The responsibilities listed below are encompassing of a General Warehouse Worker but may vary by departmental assignment
Unload and process receipt of merchandise from inbound trucks
Stocks merchandise that has been received into specific designated locations
Process all orders by locating specified product and moving product to the loading dock
Packs smaller products into larger containers for shipment to stores
Loads merchandise onto trucks for shipment to company locations
Maintains a clean work area by removing empty pallets, sweeping and cleaning up boxes and other debris.
Must be able to pass all applicable certification and driving requirements to become licensed for operating equipment in the RDC
- Perform other duties as apparent or assigned
What are the professional requirements of a General Warehouse Worker?
- Able to individually lift and maneuver 40 lbs frequently and repetitively (up to a maximum of 75 lbs; with or without reasonable accommodation)
- High School Diploma or Equivalent
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!