Gauge And Weigh Machine Adjuster Job Description Sample
Dawb- Machine Operator
Description/Job SummaryI. POSITION OBJECTIVE Perform manufacturing operations which will result in efficiently producing a flexible product on a timely basis that meets all the customer's product specifications.
Assist in setting up and operating thermoplastic extruders and associated production equipment to convert plastic resins into blown film for flexible plastic sheeting and tubing. Assist other team members in performing operations according to sound production methods to make sure a product is being produced and packaged that meets the customer's specifications. II. QUALIFICATIONS * Minimum of a high school diploma, or equivalent
Proficiency in reading, writing, and basic math
Must be able to read a ruler and measure in US standards
Two (2) years equivalent job experience in the Extrusion discipline desired
Be familiar with and able to operate a file extruder and related equipment
Need a reliable means of transportation to work to arrive at your designated shift on time
Experience driving a fork truck preferred.
Ability to communicate effectively with all levels of personnel both in writing and verbally
Must be legal to work in the US
III. TRAINING* Previous experience and/or training is ideal, but not required. IV.
AUTHORITY/DECISION MAKING Periodically observe and check finished film coming off the production lines and if detects sub-standard product takes immediate corrective action to eliminate any problems. Report all problems to technician or supervisor, if needed. V. DUTIES & RESPONSIBILITIESA. JOB TASKS & DUTIES * Perform a variety of duties related to the operation of a Film Extruder and auxiliary equipment.
Capable to work from Sales Orders (Shop Orders = SO), Special Instruction Sheets and verbal instructions.
When directed or necessary, perform setups and/or changeovers by determining Resin Blend, Roll Length, Width, Gauge, Core Size and type, Dyne Level and Film Conformation from the SO in order to perform setup or changeovers with or without a Technician. In addition, set Heat Pattern for resin being used, adjust and coordinate the Extruder speed, Internal and External air to achieve proper size, gauge and width.
Set up Winder with proper cores and perform cutovers. Make required adjustments during a SO to maintain either customer or Danafilms specifications. Report all setups, changeovers and/or adjustments to a Technician.
Remove completed roll(s) from Winder(s) as quickly and safely as possible, inspect for defects such as Scratches, Melt fracture and Pinholes. Perform required Quality checks, weigh, label, package and record production as well as weigh and record all scrap on assigned line(s) and transport to the designated area.
Change Screenpack, Clean Breaker Plate and area around it. Clean Die, Nip Rolls and Treater Rolls during required shutdowns.
Clean Reclaimer, Resin Filter(s) and Ilder Rolls as necessary or when directed to. Operate Reclaimer or the Repellitizer to recover scrap produced.
Operate Fork Trucks, Platform Trucks, Tilt Locks, Overhead Cranes, Hydraulic Jack, Pallet Jack and miscellaneous hand tools as necessary.
Assure empty boxes or gaylords are collapsed, Danafilms Labels are removed and boxes or gaylords are neatly stacked in the correct area.
Work with Technicians to learn how to perform setups and changeovers. Show willingness to advance by learning technical instructions in booklets, such as Blenders, Extruders etc., both on your own and with the Technicians and Supervisors help.
Report unusual conditions, circumstances, broken or missing equipment immediately to the Production Supervisor or a Technician.
Maintain equipment and work area in clean, orderly and safe condition at all times.
Perform assignments in conformance with health and safety requirements.
Perform all required quality checks and complete neatly and accurately all associated forms.
Perform Web Check looking for all visual defects that can be seen.
Perform other related duties as required or directed.
Expected to work Overtime beyond your normal work week.
Must have regular, reliable attendance as well as the ability to work outside the regular schedule as required.
Ability to handle job stress and interact effectively with others in the workplace.
Able to work at heights
Other duties as assigned by management * B. MACHINES, TOOLS, EQUIPMENT, ELECTRONIC DEVICES & SOFTWARE* * Operate Fork Trucks, Platform Trucks, Tilt Locks, Overhead Cranes, Hydraulic Jack, Pallet Jack, Presto lifts and miscellaneous hand and measurerment tools as necessary (i.e.rulers, calipers.micrometers etc.). C.
PHYSICAL ACTIVITY REQUIRED FOR THIS POSITION A. Climbing, ascending or descending ladders, stairs, scaffolding, ramps, using feet and legs and/or hands and arms. Body agility is emphasized.
B. Balancing, maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. C. Stooping, bending body downward and forward by bending spine and waist. / Example:
Changing paper in printer, copier machine./ D.
Kneeling, bending legs at knee to come to a rest on knee or knees. E. Crouching, bending the body downward and forward by bending leg and spine. F. Crawling, moving about on hands and knees or hands and feet.
G. Reaching, extending hand(s) and arm(s) in any direction. / Example: Giving signals, reaching for material or handle on item./ H. Standing, particularly for sustained periods of time. / Example:
Making copies, giving presentations, directing traffic./ I. Walking, moving about on foot to accomplish tasks, particularly for long distances. J. Pushing, using upper extremities to press against something with steady force in order to thrust forward, downward or outward.
K. Pulling, using upper extremities to exert force in order to drag, haul or tug objects in a sustained motion. L. Lifting, raising objects from a lower to a higher position or moving objects horizontally from position to position. DEGREE OF LIFTING: less than, or equal to 70 lbs M.
Fingering, picking, pinching, typing or otherwise working primarily with fingers rather than the whole hand or arm as in handling. N. Grasping, applying pressure to an object with fingers and palm. O. Feeling, perceiving attributes of objects such as size, shape, temperature or texture by touching with skin, particularly that of fingertips.
P. Talking, expressing or exchanging ideas by means of the spoken word; via face to face or telephone. Q. Hearing, perceiving the nature of sounds with no less than a 40 db loss @ 500 Hz, 1,000 Hz and 2,000 Hz with or without correction. Ability to receive verbal communication and to make fine discriminations in sound, such as when making fine adjustments on machined parts.
R. Repetitive motions, substantial movements (motions) of the wrists, hands and/or fingers. / Example: Filing, sorting mail, starting ignition of machinery./ D. VISUAL ACTIVITY REQUIRED FOR THIS POSITION A.
Machine operation, inspection, close assembly, clerical and administrative duties. C. Mobile equipment operations; operate fork lifts, cranes and high lift equipment. D. Other criteria based on accuracy and neatness of work. / Example:
Cleaning personnel, sweepers, janitors, cooks./ E. Position requires individual to differentiate colors, depth and perception. E. WORK ENVIRONMENT CONDITIONS SUBJECTED TO IN THIS POSITION A.
Inside environmental conditions protected from weather conditions, not necessarily temperature conditions. B. Outside environmental conditions, no effective protection from weather. C. Inside and outside environments apply.
D. Subject to extreme cold; temperatures below 32 degrees for periods of more than one hour. E. Subject to extreme heat; temperatures above 100 degrees for more than one hour. F. Subject to noise, causing reason to shout in order to be heard above the noise level.
G. Subject to vibration, exposure, fluctuating movement of the body. H. Subject to hazards such as moving machinery, electrical currents, falling debris, exposure to chemicals, gases, high heat or explosives. I. Subject to unregulated atmospheric conditions caused by odors, fumes, gases, poor ventilation and dusts. J. Subject to oils and other cutting fluids via touch or air. /EOE/AA including Veterans and Disabled/
Process Engineer- Glass Surface
Process Engineer- Glass Surface
Feb 3, 2018
Painted Post, NY, US, 14870 Req #: 11082 Corning is one of the world’s leading innovators in materials science. For more than 160 years, Corning has applied its unparalleled expertise inspecialty glass, ceramics, and optical physics to develop products that have created new industries and transformed people’s lives.
At Corning, our growth is fueled by a commitment to innovation. We succeed through sustained investment in research & development, a unique combination of material and process innovation, and close collaboration with customers to solve tough technology challenges. We are a four-time National Medal of Technology winner thanks to our technology leadership and R&D environment, which attract and enable the best scientific minds in the world.
This pipeline of talent has brought life-changing innovation to your fingertips for more than 160 years. Scope of Work Broaden and extend Corning Inc.’s competency in the field of cleanroom and washing system design, development, characterization and implementation to plant manufacturing systems. To design a clean / wash process system that delivers pristine glass to subsequent process operations that reduces particles, organic materials at designed cycle time.
During installation of the systems at a manufacturing location, be proactive in the propagation of precision engineering principles and practices within Corning. In addition, this position will also be responsible for providing technical support during manufacturing start up and during product qualification process. The individual will provide engineering guidance to the product / process development and manufacturing teams to demonstrate improved glass sheet quality.
Function in a high performance manufacturing and engineering environment. The person is expected to have broad technical skills and experience as well as strong interpersonal skills to work with people of diverse cultural and technical background in worldwide locations of Corning Incorporated. In addition, to ensure and complete Job Safety Analyses for new process introductions.
Scope of Position • Identify cleaning/washing equipment systems for various glass processing functions that deliver pristine glass quality • Identify environmental requirements that sustain glass quality requirements and meet customer specifications. • Responsible to determine operations required to produce products and develop processes in a cleanroom environment to ensure that quality, cost and efficiency requirements are met. • Identify defect root causes and factor into design requirements • Work with equipment suppliers to design wash systems to improve glass surface quality • Ensure measurement/inspection system meet the customer’s needs • Improve processes and solve problems based on fundamental understanding gained through the use of the scientific method • Applying DMAIC and advanced statistical tools • Improve manufacturing cost, quality, uptime, yields, cycle time, and safety • Evaluate new materials, new equipment, or new process parameters • Documenting SOP, SOS, experiment planning, and process changes Day to Day Responsibilities • Interface with Development and Engineering Teams to design and develop washing / cleaning systems for AI process requirements. • Interface with Development and Plant Engineering to develop and lead production trials of new products, processes, and technology. • Provide technical guidance and subject matter expertise in glass cleaning fundamentals • Support technology assessments of glass cleaning concepts based on fundamental science, and apply the fundamentals and engineering principles to eliminate glass defects • Design and implement key process experiments and document. • Engage in the manufacturing process development work including experiment planning, data analysis & reporting results. • Collaborate with Development groups in advancing fundamental understanding & evaluating new process and/or product ideas. • Lead scale-up and transfer of feasible technologies to manufacturing. • Manage cross functional teams and apply traditional project management methodologies of performance. • Interact with Development and Manufacturing Teams to determine product and process requirements. • Identify low cost manufacturing opportunities that maintain the specified quality level. • Design and develop new processes or improve existing processes • Use hands-on approach to solve problems and improve processes based on fundamental understanding and structured problem solving methods such as KT, Designed Experimentation, or Six Sigma • Implement Process Control and Process Discipline systems into manufacturing operations • Analyze process data using statistical tools (e.g. pareto, regression, time charting, analysis of variance, gauge R&R, etc.) • Measure and communicate performance against established objectives • Review and interpret data to make recommendations on immediate actions, long term corrective actions, follow-up experiments, etc. • Document processes and train operators and peers on defined processes Role within the group • Identify low cost cleaning / washing solutions and environmental control for new facilities • Provide measurement tools to monitor glass and environmental conditions • Individual will be responsible for participating on cross-functional project teams, on early innovation stage projects, through concept generation/certification, technology development, detail design/build, and start-up in pilot or high volume manufacturing . • Strong level of technical curiosity that will enable unique solutions to the technical challenges. • High level of fundamental understanding of the process and materials to enable the development of cost effective products and finishing machine systems. • Ability to work in a team based environment and participate on a highly matrixed project team • Understand how to integrate commercially available technologies and processes to enable Corning, Inc. to develop robust next generation process equipment solutions. • Able to effectively leverage external machine builders and system integrators for detail design, build, and integration of later stages of machine system implementation. • Understand and practice the use of semiconductor automation procedures and techniques • Be responsible for the functional and operational integrity of design, estimating costs, defining project scope, budget and schedule. • Be responsible for identification of project resources necessary to complete the project tasks and coordinate the project team’s efforts towards successfully achieving overall project objectives. • Procure, implement and document systems and assist in training operational personnel. Required Skills • Share knowledge of all cleanroom mechanical systems including make-up air, exhaust, process vacuum, compressed air, jacket cooling water, and fire protection. • Solid understanding of cleanroom air managements systems including VLF and turbulent flow rooms in 3 level fabs with both open and closed waffle slabs; understand entire process of conditioning cleanroom air including make-up air handler and filtration, temperature and humidity control, room pressurization, and fan-filter units; insure cleanrooms are balanced and certified to the proper specification. • Understand the fundamentals and equipment requirements of glass sheet washing systems used in other businesses to achieve desired glass quality • Technical Interface between Corning, and OEM automation suppliers to insures Corning success on New Business Development programs • Leadership – Champion new ideas; lead by example; provide constructive feedback to co-workers • Tolerance of Ambiguity – Working in development environment with evolving requirements • Decision Making and Problem Solving – Able to review facts and weigh options using a systematic approach to solve problems • Communication Skills – Clearly present ideas (written and verbal); read and interpret complex information • Teamwork – work closely with other team members and departments; share credit • Flexibility – change ideas and focus based on new ideas • Commitment to Task – demonstrate dependability and sense of urgency about getting results • Planning/ Prioritizing/ Goal Setting – Manage multiple projects; establish plan and use goals to guide actions; schedule people and tasks to complete projects • Support new equipment, construction and infrastructure upgrades • Knowledge of process control/analysis techniques, including DOE, SPC, Six Sigma, etc. Desired Skills • Experience with cleanroom environment fundamentals and glass sheet cleaning / washing systems • Experience working within a manufacturing organization • Effective presentation skills • Capable of leading process development / improvement projects • Innovation experience • Broad technical knowledge/ Multi-discipline • Strong written and oral communication skills Soft Skills • The ability to work in a diverse, multi-disciplinary team in which feedback must be rapidly assimilated and incorporated into project planning.
Ability to effectively present ideas and opinions to gain understanding, consensus and support across team. • The ability to provide and receive open, honest feedback on a regular basis in order to drive excellence in individual and team performance. • The ability to interface with customers, external suppliers, and technical collaborators with high professionalism and consistent with corporate values. • Work effectively as a team leader, member and facilitator. Lead by example, set expectations and motivate team members to achieve and exceed goals. • Ability to multi-task, handle shifting priorities and timeline pressure to meet project deadlines. Travel Requirements • Estimate travel up to 40% depending upon specific project assignment.
Travel may be required during installation, debug, and start-up as well as for routine interaction with Customers and Suppliers. This would be a combination of domestic and international travel. International travel would most commonly be to Asia or Europe. Education and Experience • B.S./M.S./PhD in Technical Discipline • Minimum 2-5 years of cleanroom / clean process experience
Process, Equipment, Product Development or Engineering
Technology or Product Transfer (preferred)
Glass cleaning /washing equipment and cleanroom design experience (preferred) We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, or veteran status or any other legally protected status.
Nearest Major Market: Corning
Sullivan Shear/Saw Operator 1St Shift
Title: Sullivan Shear/Saw Operator 1st Shift
Job Function: Manufacturing / Operations
Business Unit Group: Engineered Products and Solutions
Shearing of titanium sheets to size based on customer orders. Operate the production equipment in the band saw area, and inspect the sheet material, finished blanks, and the documentation of product and process conformance.
Verify correct lab release is for the order to be sheared
Review and understand the production order
Ensure stops are properly set
Check camber prior to shearing
Verify number, grade and gauge, then sign off on Production Order
Package and weigh skids of titanium
Secure scrap with plastic or metal ties, weighed and bundled. Identify bundles with grade, gauge and heat number.
Safely operate production equipment which includes all saws and hand tools
Safely operate material handling equipment
Perform routine daily, weekly, monthly, and quarterly maintenance on the equipment in the work center
Perform material and production order transactions in SAP
Identify and troubleshoot machine problems
Work with Maintenance, Quality Coordinator, and other employees and outside vendors to improve processes and troubleshoot problems
Must be able to obtain and maintain a forklift license
Other duties as assigned
Requisition Number: 21865BR
Minimum Years of Experience: Entry Level
Skill & Competency
Must stand, walk, and use hands to handle materials
Must be able to obtain and maintain a forklift license
Required to read and interpret production orders and safety, operating, maintenance, and procedure manuals
Must have basic knowledge of math, math equations and use of various measuring instruments
Must work a full-time schedule and overtime as required
Must have basic computer skills
Must have problem solving skills, good communication skills, and the ability to work with others
Prior experience with inspection tools such as micrometers, calipers, and scales is preferred but not required
Must be detail oriented, self-motivated, and be able to work with minimal supervision
Primary Location: MO-Sullivan
Minimum Education Required: High School or GED
Minimum Travel Required: None
High school diploma or GED
Must be 18 years of age or older
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Business Unit: Arconic Engineered Structures
Job Type: Entry Level/New Grad Compliance With the Equal Employment Opportunity and Affirmative Action Laws and Regulations Arconic reaffirms its policy to provide equal employment opportunity in recruiting, hiring, upgrading and promotion, conditions and privileges of employment, company-sponsored training, access to facilities, educational assistance, social and recreational programs, compensation, benefits, transfers, discipline, layoffs, recalls or termination of employment to all employees without discrimination because of race, color, religion, national origin, disability, sexual orientation, gender identity / expression, veteran status, genetic information, sex or age (within statutory limits). We live our Values and measure our success by the success of our customers, shareholders, communities and people. Arconic’s success is driven by the advantage created by the collective efforts of its employees, and is dependent upon a diverse, inclusive environment that embraces change, new ideas, respect for the individual and fosters an equal opportunity for success. We have zero tolerance for discrimination, intimidation or harassment of any kind.
TWO Quality Control (Qc) Inspectors - Irwindale, CA 91706
TWO Quality Control (QC) Inspector
- Irwindale, CA 91706 Presented By Daniel.McDermott@KellyServices.Com Cell/Txt: (619)296-1942 Quality Control (QC) Inspector/Medical Device: Components & Raw Materials JOB DESCRIPTION:
Perform routine inspection including, but not limited to, raw material control, components inspection, product evaluation, analytical assays, validation analysis, and special projects as assigned by supervisor or manager. Contribute to improvements in the lab through participation in continuous improvement process. Every day Kelly Services connects professionals with opportunities to advance their careers.
Currently we are seeking TWO experienced Quality Control Inspectors for a long term, 3-5+ year contract position with a full benefits package including, health and Dental, paid time off, vacation days and 401K. This Med Device QA, QC Visual Inspection positions focused in raw material control, components inspection, product evaluation, analytical assays, validation analysis, and special projects as assigned by supervisor or manager. ~ TWO Positions in Irwindale, CA 91706 (Northeast Los Angeles, Between Pasadena and Ontario) ~ The pay Rate is $17.50/hr and working hours are generally 8-5 or 7-4 M-F and maybe an occasional weekend OT available when needed. These are extremely long-term, long term, 3-5+ year contract position with a full benefits package including, health and Dental, paid time off, vacation days and 401K.
Quality Control (QC) Inspector Type of Hours: Full Time This position will be responsible for performing routine inspection activities including, but not limited to, raw material control, components inspection, product evaluation, analytical assays, validation analysis, and special projects as assigned by supervisor or manager. Contribute to improvements in the lab through participation in continuous improvement process including:
Visually, dimensionally, mechanically and electrically performing inspections on all product lines, including products assembled with electronic Components for conformance to specifications by examining random samples.
Working with and interpreting detailed dimensional and functional specifications, engineering changes, inspection methods, and related documentation and equipment in support of and to perform quality inspection functions.
Interfacing with engineering, production and R&D personnel by identifying problems and offering solutions to simple engineering problems. Major duties/responsibilities:
Manual ability and visual coordination to use microscopes, calipers, micrometers, height gages and gage blocks. Perform dimensional and visual inspection of assigned raw materials and components per approved procedures/inspection plans. Documents all inspection / test results and any non-conformances found during inspection, testing or evaluations according to approved procedures/inspection plans.
Maintain knowledge of all procedures, change to specifications and applicable regulations and standards related to areas of responsibilities. Review inspection/test results; provide feedback to engineers and quality technicians. Perform final review of Device History Records DHR for finished product release.
Performs disposition of raw materials and components. Be able to read and interpret engineering drawings. For this position, we require:
PC Literacy and use of Microsoft office. As the local offices of Kelly Services do not represent the above position, please apply on-line for immediate consideration. For questions regarding this position, please e-mail me at: email@example.com To be presented for immediate interview, please forward your resume in Word Format along with a short paragraph (4-5 good sentences) of your specific experience with microscopes, testing machines, Optical comparator, Height gauge, Caliper, Micrometer, block gauge etc and other technical equipment and I have excellent math skills with the ability to accurately weigh and measure products when testing the sample batches. (See QC Candidate Example Summary Below) Thanks! Daniel McDermott
- Professional Technical Recruiter firstname.lastname@example.org Kelly Services Global Talent Solutions – Recruiting and Sourcing Cel/Txt: (619) 296-1942 https://www.linkedin.com/in/daniel-mcdermott-phr-0638385 Example QC Candidate Summary “I have an associate's degree in electronics and Five plus years of experience working as a Quality Control Inspector in Medical field. I have extensive knowledge of the capital equipment your company manufactures, along with the knowledge and skills to ensure they meet the highest standards possible.
I am very observant with the ability to pay close attention to details visually, dimensionally or mechanically to ensure nothing is overlooked during the testing phrase, in-process inspection, receiving inspection etc and I have the knowledge to know exactly what to look for during the tests or during inspection. I have excellent computer skills and the patience to run the detailed tests involved in making sure the products meet the quality standards required by the federal government and by your company. I am also familiar with microscopes, testing machines, Optical comparator, Height gauge, Caliper, Micrometer, block gauge etc and other technical equipment and I have excellent math skills with the ability to accurately weigh and measure products when testing the sample batches.
I also have the skills to record my findings in detailed reports and the communication skills to explain the exact problems found. This way, the company can take the proper steps to ensure that quality, safety and the purity standards are met.”
? At Kelly Services ® , we work with the best. Our clients include 95 of the Fortune 100 ™ companies, and more than 70,000 hiring managers rely on Kelly annually to access the best talent to drive their business forward. If you only make one career connection today, connect with Kelly.
® As a workforce advocate for over 70 years, we are proud to directly employ nearly 500,000 people around the world and have a role in connecting thousands more with work through our global network of talent suppliers and partners. Revenue in 2016 was $5.3 billion.
Visit kellyservices.com and connect with us on Facebook , LinkedIn and Twitter . Kelly Services is an equal opportunity employer including, but not limited to, Minorities, Females, Individuals with Disabilities, Protected Veterans, Sexual Orientation, Gender Identity and is committed to employing a diverse workforce. Equal Employment Opportunity is The Law. at https://www.dol.gov/ofccp/regs/compliance/posters/ofccpost.htm
Quality Control Inspector-San Jose
• SUMMARY: The Quality Control Specialist is responsible for ensuring manufacturing processes and procedures are adhered to in order to ensure the quality of the products. The Quality Control Specialist may visually inspect or manually test products or processes, before, during or after the manufacturing process. Specialists may also run and monitor inspection equipment, as well as record and analyze quality data.
• Quality Control Specialist may perform their duties in a number of locations, such as a workstations, assembly lines, laboratories, customer sites or at warehouses and material storage locations. They may have to stand for hours at a time, or perform their duties seated in a controlled environment. The Quality Control Specialist may be required to work overtime during peak manufacturing periods or audits with short notice.
• Duties of a Quality Control Specialist
• Specific duties vary, depending on the project involved. However, no matter which project, the main objective of the Quality Control Specialist is to verify the product or process meets the customer specifications and requirements.
• The Quality Control Specialist will have the responsibility to accept or reject work products as necessary.
• The Quality Control Specialist will have the responsibility to review specifications, standards and/or test plans, and make recommendations.
• Quality Control Specialist will keep a record of issues they find and may send defective products back to the production line or suppliers for repair, review and implement corrective actions to the product and/or process, report results.
• The Quality Control Specialist may work on non-conforming products to determine the problems in the manufacturing process and report the root causes found.
• May be required to conduct controlled testing on products or processes to determine how the products or processes perform in a simulated environment.
• The Quality Control Specialist will use specialized instruments to perform their duties.
• The Quality Control Specialist may weigh or measure finished products, perform time studies and or evaluate processes and activities for improvements.
• The Quality Control Specialist may be required to measure and visually inspect workmanship or gauge product reliability.
• The Quality Control Specialist will be involved in the training of junior inspectors.
• Review, implement and follow up on corrective and preventive actions derived from customer complaints and/or customer returns.
• Quality Control Specialist Requirements
• Education requirements:
• A.S. degree in engineering, business or equivalent is desired but not required.
• Spanish is a huge plus but not required.
• Ability to attend training and implement concepts learned during that training.
• A minimum of two years of Quality control on-the-job experience is required.
• Certificate in quality control or specialized training within the industry field is desired.
Fabrication Operator 2Nd Shift (1429A)
The Fabrication Operator is responsible for the setup, adjustment and operation of all progressive tooling in all sizes of Punch Presses. Daily use of Servo feeder, straightener, and dereeler and familiarity of types of material (Aluminum, Cold Roll, Stainless and Galvanized Material). Also the use and setup of brakes presses and shears to perform a wide variety of forming, notching, bending, punching, and cutting operations on a variety of materials.
- Set complicated dies such as compound, progressive, combination,
- Set up and synchronize automatic material
- Use of Crane to load and unload coil/material.
- Position, align and secure die sections, adjust stop gauges, rams, strippers, and ejectors, set and adjust safety operating
- Adjust to correct May be asked to run two automatic punch presses at the same time during the shift.
- Set up standard punch presses and automatic punch presses and feed lines. Adjust as necessary when
- Operate large automatic Operate standard punch press. Work from detailed blueprints, specifications, and production orders.
- Use scale, square; dial calipers, micrometer, and protractor for checking piece Insure high quality or parts being produced.
- Check parts and materials to blueprints, templates or other
- Assist others in set up of presses or the operation of the Inform supervision of any damage to dies or machine.
- Set dimensional back, front and side squaring gauges. Adjust shear blade clearance for gauge of material to be used, improvise with gauging for angled shearing.
- Use dispatch list for reference of where to send parts for their next operations.
- Layout shearing sequence for efficient use of material and avoid excessive waste and drop-offs.
- Loading and unloading of Laser.
- Deburring and or sanding off slag from inferior Laser cutting and stacking them neatly onto a pallet or specified container.
- Setup of brake presses, CNC punch press and auto gauging equipment for multiple pass
- Setup dies and gauges, adjust ram stroke to form to proper angles within the capacity of the
- Create setups for forming special shapes having single or compound radii and angle
- Set up fixed and adjustable punching dies and gauges for multiple and series
- Move flat stock material using overhead crane.
- Operate TRUMPF Bend Cell, loading, unloading and recalling jobs
- Operate TRUMPF TruPunch, loading, unloading and recalling jobs
- Keep work area clean and free of tripping hazards with implementing the 5S.
- High School Diploma or Equivalent (completed)
- Require ability to work from detailed blueprints, specifications and production orders and use a variety of gauges, scales,
- Requires ability to use a variety of wrenches and hand In addition, the work requires the ability to lift and stack parts which weigh from one pound to twenty pounds.
- Experience of up to three years necessary to become familiar with set up requirements and to become
- Self-Motivated/Self Starter
- Ambitious and goal orientated
- Willingness to learn
- Flexible to do cross-training in other departments
- Experience welcomed but not necessary, willing to train the right motivated individual
- Lift up to 35 pounds repetitively
Cylinder Filler / Back-Up Driver
The Linde Group is known as one of the world leaders in gases, engineering and healthcare. We operate in more than 100 countries across the globe and generated revenue of 17.9 billion euro in 2015.
But what makes us great is our people because they make great things happen. Linde employees take pride in what they do because they know it makes a real difference to our customers. They are empowered to turn a challenge into an opportunity to learn and grow.
This is how they take the lead, every day. Linde is currently seeking a Cylinder Filler / Back-up Driver to join the team in the Dallas, Texas area. Purpose of the Position:
Primarily, Under the Supervision of Plant Manager, will process gas orders in a safe and efficient manner for timely delivery to our customers. Must be able to work effectively in a team environment with a minimum of supervision and must maintain a positive working relationship with customers and employees. On Occasion, the Filler with a DOT certification of Class B or A with Hazmat endorsement will drive a straight truck loaded with medical compressed gas cylinders and medical liquid cylinders to deliver to customers on scheduled route.
Customers may include patient’s homes, physicians, labs, vets, hospitals and/or any other entity requiring medical gas. CYLINDER FILLER • Clearly understands and follows ALL Linde Safety Policies including but not limited to proper PPE, proper lifting techniques, and local site safety requirements. • Has understanding of basic GMP’s and Quality Control concepts and practices. • Count all incoming cylinders. • Load/unload trucks on a daily basis. • Pull cylinders and verify lot numbers as required. • Examine returned cylinders for surface defects such as dents, cracks, or burns and transports cylinders to designated work area. • Ability to recognize and detect test and defective cylinders and properly separate them from production in identified quarantine areas. • Remove any and all old labels and clean cylinders using approved cleaning solution. • Safely operate a forklift to load and unload trucks and gather stock from the warehouse. • Follows Linde procedures for safe handling, storing, securing and proper nesting of cylinders. • Receive all goods according to standard written procedures; documenting all incoming shipments, checking shipments against purchase orders and verifying contents of shipments against packing slips in accordance with Linde procedures.. • Inspect valves for correct CGA connection and pressure relief device. • Connect cylinders to manifold, open valves to draw off residual gas and evacuate cylinders. • Understands and inspects fill manifold for proper operation prior to filling or connecting cylinder. Understands the need to bring up issues with local management if system is not functioning properly or if there are questions surrounding the operation. • Reviews and documents proper thermometer, gauge and analytical equipment calibrations and ensures all equipment is properly calibrated and within established guidelines for frequency. • Inspect cylinder labels to assure they are legible, compliant with current federal requirements and correct for the service intended; replace if damaged • Fill cylinders in accordance with specific guidelines whether by pressure or weight, as appropriate.
Weigh cylinders filled with liquid products on platform scale and record weight. • Test cylinders for leaks by brushing or spraying chemical solution around valve. Record all necessary documentation and set a cylinder aside for settled pressure checks. • Operate and safely maintain equipment for pumping or repackaging gases into cylinders. • Perform all required pre-fill and post-fill inspections and tests before cylinders are released. • Ensure cylinders are adequately maintained. Cylinders requiring maintenance or repair are removed from service until corrected. • Regularly inspect and maintain pumping apparatus and associated monitoring devices. • Ensure cylinder filling records are accurately maintained and that all required procedures are followed in accordance with local, state and federal regulations. • Safely operate a forklift and hand truck WHEN PERFORMING MEDICAL ROUTE DRIVING • Work in accordance with all DOT and Linde standards and policies including but not limited to Speed Management, Seat Belts, Cones and Hours of Service • Drives a straight truck loaded with medical compressed gas cylinders and medical liquid vessels for delivery to customers on a scheduled route.
Customers may include medical patients in their homes, physicians’ offices, laboratories, veterinarians, hospitals and/or any other entity requiring medical gas. • Record each delivery and pick up on a load manifest and obtain signatures from customers to comply with all regulatory requirements • Listen to and resolve service inquiries and complaints/issues. • Perform pre and post trip vehicle inspections, document deficiencies and ensure all safety items are in good working order. • Communicate with customers; providing information on ordering, delivery times, and maintaining proper cylinder levels. • Gain comfort level for communicating with, and going in and out of the homes of, medical patients. Basic ▪ High School Diploma, GED or 10 years' experience within current CDL class ▪ 3 years driving experience - CDL Class A or Class B with current HazMat endorsement ▪ 3 years clean driving record ▪ 2 years experience in a manufacturing or logistics environment Preferred • Dangerous Goods Cards is a plus • Ability to work independently and under some pressure to meet deadlines • Flexibility to meet changing customer demands • Demonstrates a clear and effective speaking manner for the purpose of conveying information • Clear understanding of map reading skills • Ability to read and understand DOT and FDA required paperwork • Strong written and verbal communication skills • Strong customer service • Basic computer skills • Home care/health care background is a plus • Formal forklift training/experience preferred • Ability to read and understand DOT and FDA required paperwork The Linde Group is known as one of the world leaders in gases, engineering and healthcare. We operate in more than 100 countries across the globe and generated revenue of 17.9 billion euro in 2015.
But what makes us great is our people because they make great things happen. Linde employees take pride in what they do because they know it makes a real difference to our customers. They are empowered to turn a challenge into an opportunity to learn and grow.
This is how they take the lead, every day. Join a World Leading Team Today! Linde is an Equal Opportunity Employer (EOE). Company provides equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disabled status or any legally recognized status entitled to protection under applicable federal, state, or local laws.
ID:: 2017-4738 External Company Name: Linde Engineering North America, Inc. External Company URL: lindeppusa.com
Merchandising Manager- Chef'store-Cash And Carry
Basic Purpose- The Intermediate Mgr., Manager C&C will provide merchandising support to all CHEF’STORE locations for their assigned categories. The Merchandising team will:1.Develop and implement merchandising strategies to achieve category sales & margin targets. 2.Coordinate and communicate merchandising initiatives (product, placement, price, promotion), including the development and production of merchandising plans and plan-o-gram schematic.3.Negotiate with vendors & collaborate with USF Category Managers on product costs, assortment requirements and vendor support.4.Collaborate with CHEF’STORE operations team on assortment to drive the right local product mix.5.Align in store product strategy to drive sales of USF’s exclusive brands as well as manufacturer brands. 6.Analyze results to identify opportunities to continuously improve the CHEF’STORE business. 7.Supervise Merchandising Coordinator assigned to support the categories. Description- Define assortment strategies and execute tactics to capture sales and profit for assigned categories. Identify and negotiate the best net landed cost for each product. Ensure assortment meets mix and profit required. Develop and execute implementation plan for category strategy, customized for each CHEF’STORE location. Ensure implementation aligns with overall US Foods category strategy and goals of the CHEF’STORE business. Deliver profitable sales through effectively managing mix of category sales, vendor costs, promotions, pricing and assortment offering. Partner with corporate category management to optimize CHEF’STORE product assortment and vendor network. Gauge product penetration, noting slow and under-performing SKUs as well as new growth opportunities. Ensure category margin targets are met through analyzing daily & weekly performance. Communicate and engage regularly with vendors, Store Operations and USF Category Managers. Work on special projects as needed. Assist with development of store layouts and adjacency plans. #IND #LI-PW1 # EOE Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Protected Veteran/Disability Status Qualifications-
- Bachelor’s Degree Required
- Related Experience:* + 5 years retail/merchandising experience required.
Experience gauging product penetration, noting slow and under-performing SKUs as well as new growth opportunities preferred.
Experience ensuring category margin targets are met through analyzing daily & weekly performance preferred.
Strong Excel and database skills highly desired. Knowledge/Skills/Abilities:
Previous experience with space allocation strongly desired; space management software is a plus.
Must possess the ability to work on multiple projects and manage daily activities for the function.
Strong interpersonal skills.
Strong attention to detail, able to work independently and handle confidential information.
Must have the desire and the ability to deliver exceptional customer service.
Must have good presentation and influencing skills and possess the ability to think logically through all situations and make good business decisions.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Individual will need to speak, hear, see, sit, or stand as needed. The incumbent will be required to perform computer keyboarding activities. The position requirements may also include occasional lifting items that weigh up to 50 pounds for products, files and computer printouts.Position may require some travel.
Primary Location: Rosemont-IL
Job Description: s: Under the general supervision of the QA Manager, the Belt Slitter Operator is in charge of and responsible for the operation of the Belt Slitters, and auxiliary equipment. The Slitter Operator is also responsible for the quality of the product he or she is processing. The operator must report any defects in any product or raw material to the QA manager before beginning processing. Additional responsibilities include:
Gets materials, loads onto slitter, inspects and cleans material. Brings the department supervisor’s attention to any defects or abnormalities.
Checks slitter schedule for slitting instructions. Slits belts, unloads, wraps, weighs, tests and transports to shipping department or stock area.
May also separate, classify, weigh waste materials, drop offs, etc. Will do belt recuts as instructed.
Complete required forms and record information on the route or spec sheets in the time required.
Ensure that quality standards are being met and that product being produced will meet those standards. Required Experience:
High school diploma or equivalency diploma is required.
Technical or trade courses are preferred.
Read, understand and write English proficiently.
Basic math skills (addition, subtraction, multiplication, division).
Read snap gauge and feeler gauge.
Read stop watch, temperature gauges, etc.
Ability to read a tape measure in fractions of inches.
Prior forktruck experience preferred. Keyword: Belt Inspection From: Ammeraal Beltech
About Us: The position is with Specialty Product Technologies (SPT). SPT manufactures and markets products that sense, measure and control temperature, position, quantity, time, level and flow in the Process Automation and Factory Automation Markets. The Specialty Product Technologies business unit generates approximately $100m in revenue combined with significant operating profit. With two locations; Elizabethtown NC (approximately 60 minutes from Wilmington NC suburbs) and Plainville CT (approximately 20 minutes from Hartford, CT), the business unit has more than 350 associates performing marketing, sales, product development, manufacturing, engineering, supply chain management, human resources, finance and customer service activities. The business is comprised of a variety of product lines under industry recognized brand names including Veeder Root, Eagle Signal, Namco, Dolan Jenner, Joslyn Clark, Superior Electric, Thomson, Hecon, and Partlow. The markets served include electronic timers and counters, mechanical times and counters, voltage control components, variable transformers, thermoplastic bearings, safety light curtains, proximity sensors, fire pump controllers, limit switches and chart recorders.
Position Summary : Inspect, test, sort, sample, or weigh raw materials or processed, machined, fabricated, or assembled parts or products for defects, wear, and deviations from specifications within the Namco product line. May use precision measuring instruments and complex test equipment. Support quality department with administrative support, dimensional studies, and gage/fixture studies. Other additional duties as assigned.
• Measure parts and final assemblies using various gages (calipers, micrometers, height gages, thread gages, ring gages, comparator, CMM, vision system) • Update and maintain first article documentation. • Perform gauge R&R studies to certify new gauges. • Assists engineers with qualification and validation studies, including PPAP’s, & reports by collecting, compiling, measuring, organizing, and recording data and by writing procedures. • Disposition non-conforming material by utilizing quality tools and Danaher manufacturing processes and procedures. • Write, update and improve quality procedures including development of visual aids. • Analyze and interpret blueprints, data, manuals, and other materials to determine specifications, inspection and testing procedures, adjustment and certification methods, formulas, and measuring instruments required. • Inspect, test, or measure materials, products, installations, or work for conformance to specifications. • Continuously take the initiative to seek and improve processes by utilizing the DBS tools. • Other duties as assigned within Namco or within another product lines as business demands.
Associate's Degree and 3-5 years of related work experience or equivalent combination.
Previous application of quality tools to include a variety of hand inspection tools, comparators, CMM, and vision system.
Familiarity and understanding of the basic principles of statistical process control (SPC) and control charts
Ability to be independently organize and prioritize multiple tasks.
Must be able to work independently as a problem solver with excellent verbal and written communication skills.
Previous experience with performing PPAP’s
Basic knowledge of AIAG Manual, Blueprint reading, basic knowledge of GD&T plus
Excellent knowledge of Microsoft Word, Excel and the ability to learn new software programs.
Fortive is a diversified industrial growth company comprised of global businesses that are recognized leaders in attractive markets. With more than $6 billion in annual revenues, Fortive’s well-known brands hold leading positions in field instrumentation, transportation, sensing, product realization, automation and specialty, and franchise distribution. Fortive is headquartered in Everett, Washington and employs a team of more than 24,000 research and development, manufacturing, sales, distribution, service and administrative employees in more than 40 countries around the world. Our team grows by tackling challenges that accelerate progress and further their careers. With a culture rooted in continuous improvement, the core of our company’s operating model is the Fortive Business System. For more information please visit: www.fortive.com .
Job: Manufacturing / Operations
Primary Location: North America-United States-NC-Elizabethtown
Other Locations: North America-United States-NC-Wilmington, North America-United States-North Carolina, North America-United States-NC-Fayetteville
Req ID: SPE000159
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!