Gear Cutting Machine Operator Production Job Description Sample
Machine Operator Steel Cutting Department
Responsible for work in different areas of shop. Package sheet/trim materials. Move finished materials to trucks with cranes & forklifts.
Overhead crane and forklift experience a plus.
Mechanically inclined. Crane Operators & Loaders: are responsible for loading trucks, using overhead crane and forklifts using order set verification.
Must be able to lift at least 60 lbs.
Must be able to work at heights over 5'10".
Warehouse background, Crane skills, and Forklift Skills are very helpful.
Press Rollforming Operators: Operate 21 foot Jorns Press Break for light gauge steel. Read blue prints and set up special parts for production.
1-3 years Jorns or similar press experience required.
Must be able to read Blueprints.
Ability to read tape measure to sixteenths.
Dependable work ethic with positive attitude
Able to read/write and read tape measure (pre-employment testing)
Must be able to lift up to 50 lbs.
Must be able to work overtime hours
Must be able to pass drug screen and background check
Background in manufacturing with overhead crane and forklift experience a plus
Must pass pre-hire assessment (NCRC-silver cert)
Must be available to work night shift
NCI is an equal opportunity at will employer and does not discriminate against any employee or applicant for employment because of age, race, religion, color, disability, sex, sexual orientation or national origin.
Machinist II - Gear Cutting
Rexnord® is a $2 billion multi-platform diversified global industrial company. Within our platforms, we serve a wide array of growing, global end markets by offering the broadest, most reliable product port-folios and trusted brands in our industries. Within Process & Motion Control, we design, manufacture, market and service specified, highly engineered mechanical components used within complex systems where our customers' reliability requirements and the cost of failure or downtime are extremely high. With-in Water Management, we design, procure, manufacture and market products that provide and enhance water quality, safety, flow control and conservation, in which customers specify our products due to performance, life cycle and project cost, and our service levels. Founded in 1892, Rexnord is headquartered in Milwaukee, Wisconsin, U.S.A. and employs approximately 7,400 associates worldwide. For more in-formation about the company visit http://www.rexnord.com/.
The Rexnord Specialty Components Group is a significant business unit within the Power & Motion Control Segment of Rexnord. The Specialty Component Group includes Stearns, W.M. Berg, and Highfield Manufacturing Company. For over 100 years Stearns has been recognized for our innovation and superior quality in the clutch and brake industry. We lead the market by setting the standard for brake and clutch quality, on-time performance and commitment to innovative service. W.M. Berg has been in existence for over 50 years and has consistently set the standard of excellence as the world's leading manufacturer of miniature precision mechanical components. Highfield Manufacturing Company is a manufacturer of Utility Security Products, Gas Safety Valves, Fabricated Impellers, Air Blower Baffles, and other specialty products to a wide array of customers in different segments of Utility and Industrial OEM Marketplaces, both domestically and abroad.
Set up and operate various gear cutting machines under minimal supervision.
Note: These statements are intended to describe the general nature of the job and are not intended to be an exhaustive list of all duties and responsibilities.
Familiar with operating gear cutting equipment producing Spur, Sprocket, Helical, Bevel, Worm, Internal & External gears. (Barber Coleman, Gleason, Fellows, etc.)
Calculate and set machine controls to position tools in relationship to work piece and to regulate factors, such as run out, cutting depth, speed and feed.
Complete all related paper work - work orders, inspection documents, and tracking sheets as required.
Maintain quality expectations while hitting daily production goals.
Proficient use of computer.
Maintain proper machine maintenance of machine, equipment and facilities and keep in proper condition.
Maintain a clean and safe workplace in accordance with Rexnord policies, 5S procedures, and in line with Rexnord core values.
Note: These statements are intended to describe the general nature of the job and are not intended to be an exhaustive list of all knowledge, skills, and abilities.
A technical degree and/or at least 3-5 years experience cutting gears, or related experience and training; or equivalent combination of education and experience.
Effectively communicate and work in a team environment.
Requires extensive knowledge of various metals and related cutting tools.
Accurately read and comprehend complex blue prints and related GD&T callouts, Gear Geometry information, work instructions, ISO procedures, etc.
Knowledge of and ability to compute advanced mathematics related to gear cutting.
Demonstrated proficiency with precision measuring tools used in gear cutting processes.
Inspect first piece and inprocess pieces to ensure parts meet specification.
Knowledge of and ability to select and adjust appropriate tools, objects or materials to attain demanding standards in different work situations.
Knowledge of and ability to solve unique problems that are diversified and involved. Judgment is required to adapt standard practices and principles to meet new conditions.
Matching 401(k) contribution
Discretionary Personal Retirement Account
Short-Term Disability Insurance
Long-Term Disability Insurance
Accidental Death and Dismemberment Insurance
Flexible Spending Accounts (Medical and Dependent Care)
Matching Gift Program
Equal Employment Opportunity Employer: Female/Sexual Orientation/Gender Identity/Minority/Veteran/Disabled
Production Machine Operator
GENERAL DESCRIPTION OF POSITION
Producing machine components that meet supplier and customer needs, work standards, and all quality requirements.
ESSENTIAL DUTIES AND RESPONSIBILITIES
Support daily manufacturing work schedules, meeting all goals of safety, quality, delivery, and cost.
Self-sufficiency in operating complex machining equipment including start-up and shutdown, re-starts after stoppages, and problem solving equipment processing issues.
Demonstrate strong math skills and part print interpretation skills including tolerances, GD&T, materials and processes.
Ability to properly load/unload materials and parts in a safe & efficient manner.
Demonstrate full understanding of complex gauging including set-up and operation.
Perform necessary quality checks of parts including the effective use of calipers, micrometers and complex functional gauges.
Remove chips/swarf from machines to maintain proper machinery operation.
Perform operator PM of machinery including required lubrication & maintaining proper oil and coolant levels.
Exhibit strong problem solving capabilities with ability to make process improvement recommendations.
Work closely with team leader and team members to achieve necessary work requirements.
Maintain a clean work environment including daily cleaning of floors and machinery within the assigned work area.
Exhibit proficiency in basic shop skills including 5S and safety, obtaining & utilizing manufacturing documents, basic part print understanding, general gauging procedures, refractometer readings and coolant concentrations adjustments, general SPC station utilization, material scrap procedures, ISO guidelines, and productivity database utilization.
Ability to maintain and operate multiple machines at a time.
Complete any and all necessary forms and paperwork.
Understands and follows the Jackson site's environmental policy and the environmental impacts associated with their work activities.
Perform any other related duties as required or assigned.
To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
KEY COMPETENCIES AND ATTRIBUTES
Must be capable of following written and verbal instructions
Must be capable and willing to work in a machining environment requiring the use of cutting fluids and oils
Must be capable of working in a standing job for continuous periods of 8-10 hours
Must be capable of lifting and moving parts containers weighing up to 40 lbs
Must be capable of focusing on safety first followed by quality
Must be a team player, capable of working effectively in a team environment
Must be flexible and willing to work the necessary overtime required to meet aggressive goals
Must be dependable, punctual, and have good attendance
Must demonstrate accountability and ownership
Must demonstrate cooperativeness
Must respect all people and work well with people of all levels
- High School Diploma or GED required
- 2 years of equivalent machining experience
The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations.
While performing the functions of this job, the employee is continuously required to stand; regularly required to walk, use hands to finger, handle, or feel, reach with hands and arms; frequently required to stoop, kneel, crouch, or crawl, talk or hear; and occasionally required to climb or balance.
The employee must occasionally lift and/or move up to 50 pounds, frequently lift and/or move up to 25 pounds, regularly lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision.
The following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the functions of this job, the employee is frequently exposed to work near moving mechanical parts.
The noise level in the work environment is usually loud.
Machine Operator / Production Line
Friendly's Manufacturing is hiring full time production workers for their ice cream cake operations. This opportunity starts in our entry level training position with amazing promotion opportunities to grow and earn more with the company in as little as 3-6 months!
Since 1935 Friendly's has been a New England ice cream staple! Now teamed up with Dean Foods, the nation's leading manufacturer and distributor of top-rated dairy products, Friendly's is looking to grow their team of hardworking employees to supply the growing popularity of all of their great tasting ice cream. Friendly's offers competitive pay with shift differentials, exceptional benefits packages, 401K contribution match and more!
Ice Cream Production workers clean, set-up, operate and monitor equipment of the production line making all of our favorite Friendly's products.
Job responsibilities include:
Assembly line work to make ice cream cake productions
Assists with cleaning, assembling and set up of basic work center equipment
Operates assigned work center equipment with supervision
Support the production of ice cream products according to formulation in adherence with quality standards and food safety guidelines
Completes assigned paperwork during cleaning and productions runs under supervision
GED/high school diploma
must be able to communicate effectively and work in a team environment
must be able to perform all job functions safely
ability to lift up to 50 lbs and safetly operate power hand trucks
experience within the food and beverage industry is beneficial
Must be able to pass all pre-employment screens (including drug, background and criminal checks)
EEO StatementDean Foods considers marijuana (including medical marijuana) to be an illegal drug. Dean Foods will rescind offers of employment to applicants who test positive for marijuana (unless restricted from doing so by state or local law). Dean Foods is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
Production Machine Operator
Requisition id: 13067
Additional Location(s): Amarillo; Dallas; Fort Worth; Oklahoma City; Wichita Falls
Sealed Air Corporation is a knowledge-based company focused on packaging solutions that help our customers achieve their sustainability goals in the face of today's biggest social and environmental challenges. Our portfolio of widely recognized brands, including Cryovac® brand food packaging solutions and Bubble Wrap® brand cushioning, enable a safer and less wasteful food supply chain and protect valuable goods shipped around the world. Sealed Air generated $4.2 billion in sales in 2016 and has approximately 14,000 employees who serve customers in 117 countries. To learn more, visit www.sealedair.com.
TITLE: Production Machine Operator
Under the direction of production management, this position works to perform a variety of operational functions that constitute the production, inspection and distribution of products or services for our customers.
Job Description Cont.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Operate a production machine.
Check customer specifications to ensure proper set up of machine.
Check data sheet and sales type to ensure proper set up.
Check packaging schedule to ensure proper packaging.
Complete run report correctly.
Obtain proper color ink from ink dispenser and reduce/increase viscosity when needed.
Obtain proper amount of sticky back from ink station.
Mount plates according to procedures.
Obtain correct size and type jaws from the jaw room.
Verify order information.
Quality - A visual check of the roll must be done, as well, to ensure there are no defects on the rolls.
Set machine parameters according to standard operating procedures written for each specific job.
Check ink viscosity and fill in specified intervals to ensure print quality.
Place the proper pieces of boxes together, using filament tape, before pushing the completed carton out to the warehouse operator.
Using department guidelines, load all barrier/TBG rolls onto unwind stand.
As a team member, follow all safety, quality, plant GMP and safe food handling rules
Internal Interaction required with:
Production Team Lead
Production Supervisor and Management
SF Warehouse Team Me
EXPERIENCE: Manufacturing experience preferred
EDUCATION: High School Diploma
Must be able to work in a fast paced environment, be well organized, and be a team player.
Must be willing to work nights and weekends.
Computer knowledge (SAP, Excel, and Word) is a plus.
Requisition id: 13067
Additional Location(s): Amarillo; Dallas; Fort Worth; Oklahoma City; Wichita Falls
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability or protected veteran status.
Nearest Major Market: Wichita Falls
Job Segment: Industrial, Warehouse, Engineer, ERP, Equipment Operator, Manufacturing, Technology, Engineering
Manufacturing Production / General Labor / Machine Operator - All Shifts
Johnson Controls produces 146 million batteries every year. We power every type of passenger vehicle, heavy-duty and light commercial trucks, motorcycles, golf cars, lawn and garden tractors and marine applications.
The facility in Canby, OR is seeking production associates to fill multiple utility positions.
Wages starting at $15/hour
Incentive employees earn $11.82/hour plus shift differential and earn incentive potential on top of their base wage. The plant average earnings for an incentive employee is 180%, or $21.28/hour.
Excellent benefits packages, vacation, holidays and bonuses offered
Lots of opportunity for growth and advancement
This is a great opportunity for mechanically inclined and team oriented candidates who have an interest in working in a manufacturing setting.
Production associate duties include:
Adhere to all safety standards
Perform set up of machines (including calibration and clean up) to exact specifications and ensure material is loaded properly
Know how to perform all functions on assigned production machines, including controlling and adjusting machine settings, feed raw materials or parts to semi-automated machines
Verify that product meets quality standards and keep records of approved and defective units
High School Diploma or Equivalency required
Must be able to work all shifts up to 12 hours, as overtime may be required
Must be able to lift up to 50 lbs
Basic computer skills required
Ability to read and understand all production specifications required
Ability to neatly and accurately record required data
Fork lift or material handling experience preferred
Warehouse or Manufacturing experience preferred
Inventory experience preferred
Machine troubleshooting or repair experience preferred
Successful Production Associates must be willing to learn new things and work in a team environment to get the product out in a safe and timely manner, while meeting quality standards.
Production Worker - Machine Operator
Job Title: Production Worker - Machine Operator
Department: All Departments
Supervisor: Production Line Foremen
Quaker Windows is one of the fastest growing companies in mid-Missouri. This manufacturing production position operates vinyl welding and cleaning machines, wood fastening machines. There are current opportunities at two of our manufacturing facilities.
Essential Duties and Responsibilities
Tends fabricating machines to cut, shape, fasten and bend metal, vinyl and wood, plates, sheets, tubes and structures.
Observes machine operation to detect workpiece defects or machine malfunction.
Measures workpiece dimensions to determine accuracy of machine operation.
Contributes to building a positive team spirit.
Is consistently at work and on time.
Follows instructions, ability to work as part of a team, responds to direction, commits to extra hours of work when necessary to reach goals, completes tasks on time.
Monitors own work to ensure quality, and components are as ordered.
Meets productivity standards; completes work in timely manner; strives to increase productivity.
Observes safety and security procedures; reports potentially unsafe conditions ; uses equipment and materials properly.
Other duties may be assigned as required by manager. No supervisory responsibilities.
Ability to perform these operations using units of Standard measurement, volume, and distance.
Ability to apply common sense understanding to carry out simple one- or two-step instructions.
Ability to deal with standardized situations with only occasional or no variables.
Education and/or Experience
Less than high school education; or up to one month related experience or training; or equivalent combination of education and experience.
While performing the duties of this Job, the employee is frequently exposed to climactic variations, to various levels of vibration, and occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate.
2Nd Shift Production Machine Operator
Production Machine Operator
CAC, a manufacturer located in Lake Forest currently has openings for short-cycle Production Machine Operators with experience in a fast paced manufacturing environment. We are looking for someone who is a motivated team player with a great attitude. If you possess the required experience, a strong can-do attitude, have a knack for accuracy and efficiency and work great within a team environment, we'd like to meet you!
What you'll do each day:
Responsible for short cycle machine operations associated with quantity production of identical units
Pull and cut orders (paneling, punch press, drilling)
Start and stop machine, load/feed the machine and watch machines operations to ensure smooth operation
Monitor production to ensure quality and perform verifications and inspection of the product and the machine
Ensure equipment is in top operational performance by calling for repairs when needed
Complete proper transactions for each job
Label material with correct designations
Ensure job and materials are of good quality
Meet or exceed customer's specifications as outlined on the manufacturing order
Any other tasks or responsibilities assigned by his or her supervisors
Our wish list:
Available to work 2nd shift (start time 4 pm)
One year machine operation experience
Experience and knowledge of machinery and/or tools
Excellent team player and positive work approach
Detailed oriented and quality focused
Ability to lift up to 50 lbs
Must pass the Drug Test and Background Check
We offer competitive pay based on your experience and a great benefits package including medical, dental, vision and life insurance, 401K with employer match, Paid Time Off, Holiday pay, fun company events and a great team to work with! Sound interesting? Then we'd like to hear from you.
Machine Operator - Dairy Production Team
Company Name: Swan Island Dairy
Position Type: Employee
FLSA Status: Non-Exempt
The Machine Operator is responsible for all aspects of machine operation and changeover activities to achieve and maintain world class quality. Perform all jobs safely, efficiently and accurately to maintain and improve the performance of the entire plant in the areas of Safety, Quality, Reliability (SQR) and our Customer 1st strategy. Provide leadership that embodies our 7 Kroger Manufacturing High Performance Work System principles. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety.
Essential Job Functions:
Follow all safety procedures including wearing of all required personal protective equipment.
Effectively and safely operate and maintain the assigned machine and all related equipment to ensure all daily orders are met.
Complete safety observations when assigned.
Read and follow standard work for assigned machine.
Follow all standard work processes.
Verify proper components at the work station before beginning a job.
Monitor product to ensure quality standards are met or exceeded.
Complete "If down, do" list for this position when conditions dictate.
Complete all required paperwork and documentation accurately and legibly.
Maintain reliable attendance, including overtime as needed.
Maintain work area in a clean and orderly fashion.
Actively participate in Total Process Control activities.
Follow established programs, policies and practices to produce safe quality foods that meet regulatory and company requirements.
Support the development, implementation, maintenance, and ongoing improvement of the SQF 2000 Systems.
Accountable to the Kroger Manufacturing Food Safety and Quality Principles.
Must be able to perform the essential functions of this position with or without reasonable accommodation.
Minimum Position Qualifications:
Must be at least 18 years of age
High School Diploma or GED equivalent
Basic math skills
Effective written communication skills, including legibility
Strong attention to detail
Desired Previous Job Experience:
- Previous food manufacturing experience
Education Level: High School Diploma/ GED Required
Required Certifications/Licenses: None
Position Type: Full-Time
Shift(s): Day; Evening; Overnight
States: Oregon; Washington
Jobs at Kroger Manufacturing: Through quality products, strong individual commitments and team spirit, Kroger has been established as a leader in the manufacturing industry. Kroger Manufacturing provides career development programs aligned with aspirations in Engineering, Process Management, Information Systems, Quality Assurance, Operations Management, Human Resources, Finance and Procurement. Our work force programs provide technically challenging rotations with cross-functional teams, plants and locations to allow our Associates to learn from some of the brightest minds in the business. Experience and training combined with mentoring and guidance from plant sponsors prepare our Associates with the skills and leadership behaviors needed to achieve a successful career at Kroger.
Kroger Family of Companies employs nearly 443,000 associates who serve customers in 2,796 retail food stores under a variety of local banner names in 35 states and the District of Columbia. Kroger and its subsidiaries operate an expanding ClickList offering – a personalized, order online, pick up at the store service – in addition to 2,253 pharmacies, 787 convenience stores, 324 fine jewelry stores, 1,439 supermarket fuel centers and 38 food production plants in the United States. Kroger is recognized as one of America's most generous companies for its support of more than 100 Feeding America food bank partners, breast cancer research and awareness, the military and their families, and more than 145,000 community organizations including schools. Careers with The Kroger Co. and our family of companies offer competitive wages, flexible schedules, benefits and room for advancement.
Posting Notes: OR || Portland || 4950 N. Basin Ave || 97217 || Swan Island Dairy || None || Manufacturing; Operations || Employee || Non-Exempt || Full-Time || None
Production Machine Operator (Pmo)
Operates a variety of automated equipment to complete finished goods, conduct tests, prepare parts for powder coating, and package the parts. Ability to lift up to 35 lbs.
Operates a variety of production machines, machine tools and equipment used to coil, flare, flatten, and attach fittings to parts per specifications
Operates robotic and other testing equipment to check parts for defects or damage and to conduct leak tests
Hangs parts onto conveyor line hooks to prepare for the powder coating process; removes and inspects coated parts and places them into appropriate bins
Operates automated equipment to insert fittings, sealants, leak detectors into bags and to seal the bags
Compares parts and quantities to shop tags at the onset of each process
Verifies which parts, materials, supplies, and equipment are needed to ensure that an adequate supply is on hand
Complies with company policies; work rules; safety requirements; quality standards; and applicable local, state, and federal legislation
Performs other related duties as needed and assigned
Prolonged periods of standing
Intermittent periods of lifting up to 35 pounds, using fingers and hands to manipulate objects
Close vision requirements
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!