Gear Shaver Set Up Operator Job Description Sample
This machine operator position involves learning to perform the operation of shave manufacturing equipment under appropriate supervision which may include: Acme or Towa or Brown & Sharpe.The operator will be responsible for learning the skills necessary to maintain production requirements and quality standards.
Follow all safety rules.
Maintain clean, orderly work area
Operate machinery as needed, which will include feeding machines, emptying pans, inspecting/gaging parts, making minor mechanical adjustments.
Where applicable, learn to perform minor machine set-up skills; including, but not limited to, tooling changes and first piece inspection.
Record data for SPC, TS16949 documentation.
Move material by operating forklift or using non-motorized devices.
Perform minor machine maintenance such as oil changes and tightening of bolts.
Performs all other duties as requested by Supervisor or Leadperson.
Must be available to work overtime as needed.
High School Diploma (or GED).
Education/training in basic math for blueprint reading, gaging, SPC.
Ability to learn computer operation/data entry.
Basic mechanical aptitude to learn machine operation skills and develop an understanding of the manufacturing process.Ability to identify basic problems.
Ability to visualize and understand the manufacturing process.
Good communication and teamwork skills.
Ability to legibly complete sign-offs and record data for TS16949.
Must possess the ability to learn and comply with all company policies and procedures, including safety guidelines and practices.
Knowledge in TS16949 and ISO14001 requirements.
Preferred Skills & Abilities
Previous manufacturing experience.
Previous machine set-up/operating experience.
Ability to read gages, micrometers and blue prints.
Forklift operation/material-handling experience.
Gear Forge Press Operator - 3Rd Shift
Eaton located in Kearney, NE has an opening for a Full-Time 3rd Shift Gear Forge Press Operator.
Operates Gear press
Performs minor maintenance on machines
Keeps work area clean and free of hazards – 5-S program
Works and communicates with audit/quality control personnel and supervisor to
Identify quality problems or concerns
Performs set-up on presses for different Gears prints
Sorts gears, and slugs for defects
Adjusts machinery during changeover
Uses gauges to check Gears/gear specifications
Changes punches and dies as needed
Works with Toolroom on die quality problems
Gears Auditing (Quality Control)
Ability to troubleshoot machine malfunctions
Perform other incidental and related duties as required or assigned
High School diploma or GED from an accredited institution is required.
Must be authorized to work in the US without company sponsorship
Relocation not included - must live within 50 miles to be considered.
Understands Statistical Process Control
Fork truck operation
Ability to setup machinery
Ability to read process sheets
Visual inspection of cold and hot parts
Entering data into computer
Position may require daily overtime, 7 days a week and working holidays
Physical requirements include constantly being on your feet, using a set of tongs to grab hot valves and perform quality checks. The employee would be working in extreme heat in the summer. When operating an automated press the employee will be on their feet for their shift.
Some walking required when completing change overs or tooling changes.
Lifting up to 50 lbs, pushing, pulling when changing tooling. In addition to the plant wide PPE the operator is required to wear green tinted glasses, shop coat and gloves.
- One year of industrial experience
003 - Gear Lab Machine Operator
RGBSI, a leader in the staffing industry, is dedicated to provide highest quality of service to our clients and employees. We are proud to be the primary staffing partner to top companies in the automotive, aerospace, IT, media & entertainment, sports, energy, and finance industries. Because of our clients' continued growth, we are looking for an energetic professionals who enjoys working with people and to be a partner to leading US companies.
Set up and operate 1.6M and 2.0M CNC Form Gear Grinders, preferably a Reishauer Gear Grinders
Setup and operate Gear Bore Honing machine preferably a Praewema hone.
Operate overhead crane to load and unload machine.
Operate controls, programming, editing programs and performing self-inspection of parts in-process and upon completion for conformance to requirements.
Produce quality parts meeting drawing and routing requirements.
Developing and working with gear cutting processes including hobbing, shaping, including programming of CNC gear machines.
Operating a Klingenberg gear inspection techniques and chart interpretation.
Editing programs in G and M codes. Able to look at a CNC control screen and know what you are looking at and whether it makes sense how to edit the programs using the G and M codes where necessary.
Responsibilities will include performing tool changes, set up, make minor adjustments, and operation.
Perform all required inspection duties to include 1st piece and in-process, determining defects and ensure quality is met according to prints.
Numerous setups and changeovers. Run small to large parts. Parts can be anywhere from 3 " to 15 ", 20 " or larger.
Heavy use of inspection tools. Our operators inspect their own work for quality. We do not have a Finished Inspection dept. so it's the operator's responsibility to make sure the piece they've just produced is up to spec. Have to understand tolerances.
Operation of CNC (Computer Numerically Controlled) Mills and/or Lathes to machine precision machined parts at very close tolerance for aerospace, medical an automotive industries.
Sets up and operates one or more gear shaping machines to machine splines or gear teeth in metal blanks, according to machining instructions and knowledge of gear types and gear shaping procedures: Reads machining instructions or blueprints to determine machine settings, holding fixtures and cutters to use, and gear type, dimensions, tolerances, and number of teeth to be cut and shaped.
Sets up and operates one or more gear shaping machines to machine splines or gear teeth in metal blanks, according to machining instructions and knowledge of gear types gear shaping procedures
Reads machining instructions or blueprints to define machine settings, holding fixtures and cutters to use and gear type, dimensions, tolerances and number of teeth to be cut shaped
Must have a minimum of 5 to 10 years plus experience in CNC Machine operation and good print reading abilities to analyze all specifications and requirements such as dimensions and tolerances.
High school diploma or general education degree (GED); and one to four years related experience and/or training or equivalent combination of education and experience.
We offer attractive, competitive compensation and benefits including, medical, dental, vision, paid time off, holidays, 401k, Short Term Disability, AD&D and Tuition Reimbursement. If you take pride in your work and are committed to personal and professional success we want to talk to you. Please visit www.rgbsi.com to learn more.
Machine Operator Set Up Operator
Able to set up, run and troubleshoot collation and associated equipment.
50% of the time you will; Set up, operate, troubleshoot and repair collation and associated machinery
20% of the time you will; Operate collation and associated equipment in the event of labor shortages
20% of the time you will; Liaise with maintenance techs to perform major repair on collation and associated machinery
10% of the time you will; Train Operators to conduct minor repairs on collation and associated machinery
2 Years related experience and/or training required
Math: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs
Language: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization
Reasoning: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations
Reading Comprehension: Ability to read, speak and comprehend English at a minimum of 6th grade level
Production: Regular reliable punctual attendance is essential because of limited staffing resources
Equipment: Powered Industrial Truck operators permit
Work Status & Location
This full-time, non-exempt position is located in Gallatin, TN
Relocation will not be considered for this position.
In keeping with the Company's commitment to the communities in which it does business, we are an equal opportunity employer. This means that to the fullest extent required by local law, employment decisions are based on merit and business needs and not on race, color, citizenship status, national origin, ancestry, sex, gender (which state law may define to include gender identity/expression, transgender identity, pregnancy, childbirth or related medical condition, and gender stereotyping), sexual orientation, age, religion, creed, physical or mental disability, genetic information, medical condition, covered marital status, protected veteran status, or any other basis protected by applicable law.
Please note all job offers are contingent upon a successful background investigation and drug test.
Fourslide Set Up Operator I
STANLEY Engineered Fastening, a Stanley Black & Decker Company, a global leader in the development, manufacture, and sale of an extended line of metal and plastic fasteners and engineered fastening systems for commercial applications. We focus on total engineering solutions for end users' fastening requirements in the automotive, transportation, electronics, aerospace, machine tool, construction, and appliance industries. Our automotive division strives to lead the way with innovative solutions to ever changing customer challenges and opportunities. Within STANLEY Engineered Fastening's automotive division, an opening is currently available for a fourslide operator at our facility in Chesterfield, Michigan.
Basic Purpose and Objective
Under general supervision, and according to established policies and procedures, set-up various sizes and types of slide forming machines to automatically shape parts to blueprint specifications and set-up charts.
Specific Duties & Responsibilities:
Installs progressive die in machine.
Selects and installs various tooling components.
Computes feed length and positions of tooling components to produce quality part.
Adjusts position of tooling components to insure timing and proper metal forming.
Reads measuring equipment such as shadowgraph, micrometers and calipers and related equipment.
Performs minor die repairs to include sharpening and adjustments to maintain integrity of parts.
Runs strip through die.
Moves stock to and from machine
Empties containers of parts and scrap.
- High school diploma or equivalent work experience.
Apply principles of rational systems to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret a variety of instructions furnished in written, oral, diagrammatic, or schedule form.
Practical application of fractions, percentages, ratio and proportion, mensuration, logarithms, slide rule, practical algebra, geometric construction, and essentials of trigonometry.
Write instructions in moderate to simple sentences to provide manufacturing information.
Plastipak Set Up Operator 3Rd Shift
Job Description: Summary
Troubleshoot equipment including dismantling and reassembling of parts. Perform changeovers, line clearance and cleaning.
Work as one of a team for maximum effectiveness and optimal task methods, which includes product inspection, operating equipment, raw material and finished goods movements and clean room area and equipment cleaning / sanitizing. Facilitate continuous operation of the equipment through breaks.Must cross-train and be able to perform a variety of jobs within the Business Unit listed below. The combination of these jobs is based on the requirements of the Business Unit.
Must be flexible, team oriented, and adaptable as conditions change. Must be able to operate all respective equipment at a rate equal or above established standards while maintaining all quality and GMP standards. May be required to perform SAP data entries and to run lines through breaks. Assignments may be in any of the following areas:
Print/Assembly Operator - for either the 820's, 830's & 860's Package Operator – for either the 820's, 830's & 860's Bulk Operator – for either the 820's, 830's & 860's QC Inspector - for the 820's, 830's, 860's and/or molding
Primary Work LocationUSA NE - Columbus (West)
Work Shift3rd Shift 11pm-730am (United States of America)
Set Up Operator I - All Shifts
As a Set Up Operator I at Caterpillar Inc., you will utilize your basic Material Handling skills to move material throughout the warehouse. You will also operate required measuring devices and perform final quality audits.
To ensure that parts aremachined in a quality manner as needed according to the production schedule.
JOBDUTIES: May include but not limitedto:
Ability to follow routers.
Proper part protection, stacking, and packaging.
Ability to use basic hand tools.
Use and wear the proper safetyequipment.
Everyone is expected tomanage themselves responsibly and act professionally at all times as well asdemonstrate the ability to follow instructions and work in a teamenvironment.
Communicate clearly tosupervisors and lead men while showing awareness of chain of command.
Demonstrate the ability to use the intranetto follow Safety procedures as well as other shop policies and proceduresincluding work instructions.
Demonstratethe ability to recognize safe and unsafe procedures to avoid hazards.
Must know how to properly stop the machine incase of emergency.
Maintain a safe,clean, and healthy working environment including but not limited to the 5S program.
Prepare daily time sheets and other daily paper work accurately.
Familiarize themselves with identifying andproperly using the various measuring instruments including Go/No Go gages.
Ability to read and identify tolerances on ablue print.
Show the ability to performsimple shop math.
Show the ability todifferentiate good parts from bad parts including stamping.
Familiarize themselves with differentdeburring techniques.
Familiarizethemselves with insert wear.
Familiarizethemselves with thread forms as well as tool nose radius.
Must consistently meet or exceed dailyproductions standards while also maintaining safety and quality standards withminimal supervision.
Familiarizethemselves with the names and functions of the various tooling.
Recognize and understand part numbers and showthe ability to interpret work order steps.
Show the ability to make offsets effectively to maintain tolerances.
Show the ability to consistently andeffectively run machines while maintaining quality and production standardswith minimal supervision.
Show theability to recognize and change worn inserts.
Must be able to read detailedblue prints including control plan prints and set up sheets.
Begin to familiarize themselves with basic Gand M codes.
Understand the differentmachines axes and their functions.
Proper loading and unloading of parts including towers/tables, 3 jawchucks, indexable chucks and vises.
Ability to load and run parts on a CMM as needed.
Ability to understand and reset alarms forloaders including sensors as needed. Understand and use tool life as needed.
Ability to indicate a part prior to machining as needed.
Must understand and become proficient with Gand M codes.
Familiarize themselves withand understand the function of canned cycles.
Familiarize themselves with feeds and speeds understanding the cause andeffects.
Must understand the properoperation sequences in a given program.
Must demonstrate a strong and thorough understanding of the machiningprocesses.
May require the ability toset up gantry tables and towers, bar feeders, and 4th and 5th axis.
Ability to set up roll dies and etchers.
Ability to rework parts to print.
Must demonstrate the ability to start up andhome out machines.
Must demonstrate astrong understanding on how to properly replace, set, and touch offtooling.
Must understand toolinggeometry and offsets including cutter compensation.
May need to understand use of Spironi toolsetter.
Must demonstrate the ability tofollow set up sheets and routers, and set up checklist.
Must demonstrate a strong and thoroughunderstanding of part programming.
Mustunderstand and be proficient in setting up robot loaders.
Demonstrate the ability to give instructionsand train people.
Awareness of the possibilityfor improvements.
Must demonstrate astrong understanding of machine controls possibly including graphing.
Demonstrate a strong knowledge of troubleshooting skills.
Ability to cutjaws.
Ability to identify and processnonferrous metals (cleaning machine and recycling chips)
Must be proficient in identifying and use ofwork shifts (G54, G55, G56 for example).
Demonstrate the ability to use the handheld unit for uploading/downloading of programs.
Other duties asassigned
Proficient in the use of various types of measuring equipment
Strong understanding of blue prints and control plans
Top Candidates Will Also Have
Strong programming knowledge
A high school education or equivalent
Turret Press Set UP Operator
Molex is seeking a Turret Set Up Operator position to set up and operate the Turret Press machines used in the manufacturing process under supervision and direction of Production Team Leader.
- High School Diploma or GED
- 1 year of experience in a manufacturing setting
Skills and Abilities:
Able to read blueprints and use common mechanical measuring devices.
Possess strong troubleshooting skills and logical thought processes.
Molex brings together innovation and technology to deliver electronic solutions to customers worldwide. With a presence in more than 40 countries, Molex offers a full suite of solutions and services for many markets, including data communications, consumer electronics, industrial, automotive, commercial vehicle and medical.
Visit us: www.molex.com
Our Blog: www.connector.com
Molex History: www.history.molex.com
CNC Machinist/Milling Set Up Operator 1St Shift
Setup tools, geometry offsets, program offsets, comprehend program code, all inclusive to enable part to run successfully in machine. Load/unload parts from machine. Measure and inspect. Make dimensional adjustments (offsets). Resolve and communicate problems/issues to attention of Group manager.
Accurately complete all quality control documentation and inspection sheets.
Follows verbal and/or written instructions such as blueprints, traveler, work instruction, process specifications, sketches, and direction from supervisor in completing a variety of machining and inspection tasks.
Work efficiently to achieve targeted goals.
Performs other duties as assigned, to maintain efficiency throughout the company.
Adhere to the letter and spirit of the company Code of Conduct, the AdvaMed Code, MedTech Code, and all other company policies. Ensure Compliance with applicable governmental laws, rules, and regulations, both in the United States and internationally, by completing introductory and annual training and maintaining knowledge of compliance as it applies to your role.
Represent the company in a professional manner and uphold the highest standards of ethical business practices and socially responsible conduct in all interactions with other employees, customers, suppliers, and other third parties of Globus.
Must have a high school diploma (or equivalent)
Ability to read part drawings.
Clean, organized, and multi-task capability to operate multiple machines.
Team player, open to new ideas and team work, self-motivated individual, willingness to continually strive to increase personal knowledge and value.
Above average manual dexterity and mechanical aptitude.
Intermediate Math skills in geometric and trigonometric formulas a plus.
Visual inspection with the use of a microscope on small parts with attention to detail.
Flexible, reliable, self-starting team player with ability to work with little or no supervision.
Good communication skills.
Willing to grow with the Company.
Globus Medical is an Equal Opportunity Employer. EOE M/F/D/V
CNC Machinist Set Up And Operator
The CNC Machinist, Set up and Operator will be based in Tempe, Arizona and will Operate Computer Numerical Control (CNC) vertical and horizontal mills before and after heat treat. Operator for Mills, Lathes, CMM. Machining Graphite for EDM operations. Able to work in a team environment producing close tolerance graphite electrodes. Utilization of Fanuc and 3R robots.
We are looking for someone who demonstrates:
Passionate customer focus
Thoughtful, fast, disciplined execution
Tenacious commitment to continuous improvement
Relentless drive to win
Here is a glimpse of what you'll do…
Operates Computer Numerical Control (CNC) vertical and horizontal mills.
Performs machine set-ups, adjusting speeds, feeds, and depth of cut, on machined parts to specifications set forth in blueprints, drawings, engineering orders, etc.
Checks machined parts for conformance to prescribed tolerances and part prints using basic shop inspection tools (micrometers, calipers, indicators, sine plates, etc.)
Program and set up, setting tool length offsets, running probing routines, making cutter comp adjustments.
Adjust and efficiently operate machines to perform diverse and difficult operations.
Here is some of what you'll need (required)…
Must be able to machine holding close tolerances (+-.0002).
Must be able to work in a team environment.
Operate multiple machines at the same time.
Proven ability to analyze G code and make program edits as needed.
Ability to set up cutting tools and prove out new programs.
Ability to work with robotic equipment.
Ability to use basic shop inspection methods to include sine plates, indicators.
5 to 7 years' experience.
Here are a few of our preferred experiences…
Fanuc and Mazatrol controller/robot and CMM experience a plus.
Close tolerance hard milling experience a plus.
Zeiss contura CMM experience a plus.
Here are a few examples of what you'll get for the great work you provide…
Full range of medical benefits, dental, vision
Employee discounts at local retailers
Flex does not accept unsolicited resumes from headhunters, recruitment agencies or fee based recruitment services. Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. Flex does not discriminate in employment opportunities or practices on the basis of: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status or any other status protected by law. Flex provides reasonable accommodation so that qualified applicants with a disability may participate in the selection process. Please advise us of any accommodations you request in order to express interest in a position by e-mailing: firstname.lastname@example.org. Please state your request for assistance in your message. Only reasonable accommodation requests related to applying for a specific position within Flex will be reviewed at the e-mail address. Flex will contact you if it is determined that your background is a match to the required skills required for this position. Thank you for considering a career with Flex.
The information we collect:We may collect personal information that you choose to submit to us through the Website or otherwise provide to us. This may include your contact details; information provided in online questionnaires, feedback forms, or applications for employment; and information you provide such as CV/Resume. We will use your information for legitimate business purposes such as responding to comments or queries or answering questions; progressing applications for employment; allowing you to choose to share web content with others or; where you represent one of our customers or suppliers, administering the business relationship with that customer or supplier.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!