Glove Parts Inspector Job Description Sample
Recon Miscellaneous Parts Inspector 1
Your Career Begins at Timken
If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our associates make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion.
Job Title: Miscellaneous Parts Inspector
Description: Inspect end caps, backing rings and wear rings for conformity to the customer and the Association of American Railroads (AAR) specifications, using measuring instruments.
Determine if there are any defects on the product such as cracks, water etching or nicks and, whether or not the product is repairable. Reject or re-grade products not meeting specifications, marking out product areas of defect with chalk or paint. Input information, into computer terminal, covering materials scrapped or salvaged.
Assist in the assembly of cups and cones prior to the lateral operation; if required. Other tasks as assigned by the supervisor or company management.
Overall Purpose: Inspect products for conformity to customer specifications, using measuring instruments.
1.Examines product for flatness, roundness, straightness, and defects such as cracks, water etchings.
2.Marks defective areas with a non-permanent marking pen.
3.Verifies dimensions of product, using micrometers, gauges, tapes and templates.
4.Rejects or re-grades products not meeting specifications.
5.Inputs information covering material scrapped or salvaged.
Physical Demands & Frequency: Requires medium to heavy lifting, standing sitting, reaching, handling, fingering, and near acuity.
A. Position: Standing and sitting.
B. Weights & Force: Up to 25 pounds.
C. Use of Controls: Use of various gauges and hand grinder.
D. Vision must be normal (20/20). Correctional lenses are acceptable.
General Educational Development: Information may be presented in written, oral or diagrammatic form and requires a common sense understanding to be applied in order to carry out the instructions.
All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.
Nearest Major Market: Knoxville
Job Segment: Inspection, Inspector, Engineering, Quality
Parts Receiving Inspector
Job Category: Quality
At Republic Airline, our mission is to provide a safe, clean and reliable flying experience. We believe this is best accomplished by focusing on our vision, “With the BEST people, products and performance, we will be America’s Regional Airline of choice.” Republic Airline, based in Indianapolis, operates a fleet of 188 Embraer 170/175 aircraft and offers scheduled passenger service with 900 daily flights to 100 cities in 35 U.S. states, Canada, the Caribbean and Central America. The airline provides fixed-fee flights operated under our major airline partner brands of American Eagle, Delta Connection and United Express. Our 10 domiciles include CMH, DCA, EWR, IND, LGA, MCI, MIA, ORD, PHL and PIT. With more than 5,500 talented aviation professionals, Republic Airline is a great place to get your career off the runway!
Provides company oversight and control of aircraft parts and components as received, ensuring their authenticity, serviceability, and airworthiness.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned to this position as needed.
Inspects aircraft parts and materials to ensure compliance with 14 CFR Federal Aviation Regulations and Company policies.
Provides guidance and instruction to Material Services to ensure parts are handled, stored and protected in accordance with Company policies and procedures, bust industry practices and Federal Aviation Regulations.
Works with Material Service to ensure parts are handled and stored properly.
Coordinates with Material Specialists to address part receipt issues.
Files and tracks calibrated tooling and certification.
Assists in sending repairs out for repair
Performs Dimensional inspections.
Sets tasks in RAMCO when next part inspection is due.
Maintains a clean, safe working environment throughout the work shift.
Submits in writing any suggested changes in operational procedures that will enhance safety and cost effective aircraft maintenance.
Adheres to established work schedule. Participates in shift meetings and briefings as required.
Updates Supervisor on progress of work performed. Reviews paperwork at the end of shift to ensure that all work accomplished is signed for prior to departing the maintenance facility. Assists with completion of shift turnover reports in accordance with procedures in the GMM.
Completes all department internal company forms, maintenance records, documents, work orders, etc. including performing maintenance computer system transactions as required.
Performs other duties as assigned or required.
REQUIRED KNOWLEDGE, SKILLS AND ABILITIES
The requirements listed below are representative of the knowledge, skill, and/or ability necessary to perform this job.
EDUCATION and/or EXPERIENCE.
High school diploma or equivalent. At least one year related experience.
Must possess and maintain a valid Driver’s License and a clean driving record.
Must be able to operate forklifts and other machinery.
Must be able to pass and remain current on HAZMAT Dangerous Goods Handling course.
Must be at least 18 years old.
Possess basic computer skills in Microsoft Office and Word.
PREFERRED EDUCATION and/or EXPERIENCE
Previous experience in aviation or supply chain preferred.
Previous lead or supervisory experience.
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
REASONING/PROBLEM SOLVING ABILITY
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Makes limited decisions and determines best methods to solve problems by referring to established precedents and policies. Impact of decisions is moderately low.
The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job.
Able to move about the work environment.
Frequently required to stand, walk, sit, talk and hear.
Able to lift or move up to 50 pounds.
The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job.
Work near moving mechanical parts, around fumes and in high or precarious places.
Work in an open air hangar up to 100% of the time.
Exposed to moderate noise.
Travel up to 10% of the time, including overnight travel. Able to work a schedule that supports 24 hour operations.
Republic Airline is committed to providing qualified applicants and associates reasonable accommodation, when necessary, to enable the individuals to complete the application process and/or perform the essential functions of the job. An applicant and/or associate requiring reasonable accommodation to perform any essential job function, should contact Human Resources.
We are an Equal Opportunity Employer.
Please view Equal Employment Opportunity Posters provided by OFCCP here at https://www1.eeoc.gov/employers/upload/eeoc_self_print_poster.pdf%E2%80%8B .
Selected candidate(s) for hire must complete the following prior to employment: a criminal history report, global screen, drug screen, employment credit report and if applicable, a driving record.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.
Republic Airline, based in Indianapolis, operates a fleet of 188 Embraer 170/175 aircraft and offers scheduled passenger service with 950 daily flights to 100 cities in 35 U.S. states, Canada, the Caribbean and Central America. The airline provides fixed-fee flights operated under our major airline partner brands of American Eagle, Delta Connection and United Express. The airline employs about 5,500 aviation professionals. Visit www.rjet.com at http://http//www.rjet.com/ for more information, follow the company on Instagram, Twitter and YouTube, and connect on Facebook or LinkedIn.
Car Parts Inspector
Category : Manufacturing
Location/City : IL - Bloomington
Compensation- $9 per hour
General Description- Inspecting car parts for a local manufacturer.
Essential Functions of the Job- Performing quality checks on finished product using calipers and micrometers. Must be able to perform the following duties of this position with or without reasonable accommodations:
Work at least 8-10 hours daily doing manual labor repetitively while standing
Lift up to 50 lbs.
Bend and lift repetitively 8-10 hours
Work with and near machines 8-10 hours
Qualifications- Good references and reliable transportation. Attention to detail is a must. Candidates must meet the following criteria:
No criminal felonies in the past 3 years
No criminal misdemeanors in the past 3 years
Must pass a drug screen
Must pass a safety test
All Abbey Placements employees have the following benefits available:
Sam's Club Membership
Illinois Farm Bureau Membership
Full company benefits available if hired by client company.
For questions, call (309) 662-6680 or toll free (888) 500-1852.
Abbey Placements is located at:
2310 E Oakland Ave Suite 5, Bloomington, IL 61701
Receiving Inspector - Aerospace Parts
Job ID: JLH20182006-46246
At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.
Northrop Grumman Innovation Systems designs, builds and delivers space, defense and aviation-related systems to customers around the world. Our main products include launch vehicles and related propulsion systems; missile products, subsystems and defense electronics; precision weapons, armament systems and ammunition; satellites and associated space components and services; and advanced aerospace structures.
Our facility in Goleta, CA is seeking an experienced Quality Assurance Inspector with relevant aerospace industry experience working on small, medium and/or large government and commercial programs.
Performs receiving inspection per work order requirements, verifies supplier compliance with purchase order requirements, and verifies material samples and part coating thickness
Experience with dimensional inspection using precision hand tools and surface plate setup
Experience performing source inspections at sub-tier suppliers
Proficient blueprint reading skillsxperience performing source inspections at sub-tier suppliers
3-5 years of experience in aerospace industry or similar field
Excellent communication skills and ability to work in a team environment
Proficiency with Geometric Dimensioning and Tolerancing per ASME Y14.5
Experience inspecting tight tolerance machined components with complex geometry
Experience with dimensional inspection using precision hand tools and surface plate setup
Proficient blueprint reading skills
Familiarity with AS9100 or ISO 9001 Quality Management Systems
3-5 years of experience in aerospace industry or similar field
Familiarity with aerospace standards (ex. AS9100, ISO9001)
High school diploma or equivalent
Competent in Microsoft Word & Excel
Excellent communication skills and ability to work in a team environment
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions.
Job Type: Full Time
Desired Travel: less than 25%
Years of Experience: 1-3 Years
Education: High School/GED
Precision Mechanical Inspector - Machined Parts (19-21)
Perform gage control and calibrations to company and employee owned tools
Accomplish receiving inspection and material release tasks for raw material
Be concise and accurate when handling departmental paperwork
Knowledgeable and accurate in the use of equipment and methods to perform precision inspections
Provide assistance to other quality personnel and employees from other departments in a professional manner
Be available for overtime and other shifts when requested
Once trained, other tasks may include:
Generate Quality Assurance Reports (QAR'S) to address nonconforming events, both internal and external
Performing first article and other complex dimensional inspections with of minimum supervision
Shop math skills including Geometric Dimensioning and Tolerancing (GD&T) are requested
Possess, or be willing to obtain a Level 1 or 2 certification in fluorescent penetrant inspection
Coordinate Measuring Machine operation
Minimum 1-3 years of quality assurance, mechanical inspection or machining experience from a precision manufacturing environment.
Candidates shall possess the ability to perform detailed inspections and complete job documentation using the following, but not limited to:
Vernier, dial & digital calipers
O.D. & I.D. micrometers
Gage blocks & length standards
Bore gages (all types)
Tube, blade, groove and depth micrometers
Thread plug gages, ring gages
Trade schools or job-related courses or college
Computer experience including MS Windows and associated software
Penetrant and/or Fluorescent Penetrant Inspection (knowledge of, or direct experience would be favorable)
Possess experience or willing to learn Coordinate Measuring Machine (CMM) operations
Parts Inspector I
The following opportunity is available in the Middletown, CT facility for the Fuzing & Precision Products Division.
Parts Inspector I
Job Location: Middletown, CT
Work under general direction of the Quality Supervisor with minimum supervision. Perform dimensional and visual inspection of complex in-process and completed machines, cast, molded and fabricated parts.
Frequently work to tolerances of .0001 or more, using complex inspection equipment and other such items as tool maker's microscope, coordinate measuring machine, rotary table, sine plate, micro-hardness tester and red liner gear checker, curve tracers, oscilloscopes, etc. Interpret and inspect to engineering drawings, specifications and other approved work documents for such characteristics as functional testing as dimensional configuration, hardness, surface roughness, visual appearance and completion of required operations; records inspection results and completes required paperwork.
Record inspection results and complete required documentation. May occasionally be required to inspect templates, jigs, fixtures and gauges. Report discrepancies or conditions that would result in defective products.
Coordinate with product and quality assurance engineers to communicate and explain non-conforming conditions and obtain necessary corrective action; may work with customer inspector during concurrent inspections. May be required to plot measurements on control charts and histograms.
Interpret and use company/customer specified sampling plans. Assist in formulating and reporting recommendations for correction of process to eliminate or reduce percentage of defects.
Instruct and guide lower level inspection personnel as required. Maintains certification documents control.
Provide input to improve the material/fabrication incoming-to-line process. May be required to participate in improvement activities.
White Glove Key Account Manager
White Glove Key Account Manager
LinkedIn was built to help professionals achieve more in their careers, and every day millions of people use our products to make connections, discover opportunities and gain insights. Our global reach means we get to make a direct impact on the world's workforce in ways no other company can. We're much more than a digital resume – we transform lives through innovative products and technology.
Searching for your dream job? At LinkedIn, we strive to help our employees find passion and purpose. Join us in changing the way the world works.
LinkedIn's Sales Solutions team is dedicated to changing the world of sales through the use of Sales Navigator, our flagship product that connects and builds mutually beneficial relationships between buyers and sellers. As an Enterprise Account Manager, you will be part of a newly forming team designed to lead the Sales Navigator partnerships with an elite subset of our largest global customers. You will work closely with senior executives, helping to guide their digital transformation journey by acting as a change agent and trusted advisor. You will play the lead role in managing a cross-functional team and Sales Navigator deployment strategy, while continually seeking opportunities for growth to make your customers as strong and successful as possible.
Learn about LinkedIn's platform, products and associated tools (e.g. SFDC)
Manage the cross-functional relationships with our largest Sales Navigator Enterprise customers (including Sales, Sales Operations, Sales Enablement, Marketing, Procurement, Finance, IT)
Effectively communicate the LinkedIn Sales Solutions value proposition to inspire your clients to embrace a modern approach to sales
Champion Sales Navigator and guide consultative, forward-thinking conversations with the client about their business needs
Establish and nurture executive-level relationships to align on LinkedIn vision
Partner with a customer success manager to develop enterprise-wide Sales Navigator programs to end-to-end drive organizational change
Navigate complex organizational structures to find and inspire customer advocates to champion Sales Navigator within their organizations
Identify opportunities to upsell and grow the Sales Navigator relationship
Develop and execute strategic plans for the territory that will evolve and improve our sales process
Listen to the needs of the market and educate the product and marketing team
Deliver, and preferably exceed, against quarterly and annual customer success and revenue targets
Lead through example setting; serve as role model, coach, advisor, & mentor to elevate the team
- 8+ years of relevant sales experience
Experience with Enterprise level SaaS sales, technology sales, and/or consulting
Experience with business development across various geographies
Proven history of overachieving quota and driving results in a high-growth company environment
Strong program and project management skills
Excellent communication, negotiation, analytical and forecasting skills
Track record of nurturing long-term relationships with executives and senior sales leaders
Ability to position company products against direct and indirect competitors
Ability to gather and use data to inform decision making and persuade others
Ability to assess business opportunities, read prospective buyers and develop compelling strategies
Mechanical Inspector And CMM Operator - Aerospace Parts - CA #3977
Mechanical Inspector and CMM Operator
Location San Gabriel CA
Inspecting machined part tolerances (as low as .0002, and on occasion, as close as .0001 tolerance) & quality.
Must have EXCELLENT English speaking, reading, and writing skills and have the ability to clearly communicate in English and have the ability to follow verbal and written instruction.
Have at least 5 years of experience of inspection experience, preferably in an aerospace facility.
Must be capable of efficiently performing in process, and final inspections on machined components with high accuracy.
Have experience calibrating shop gauges and tools.
Must be able to use common shop measuring equipment.
Must be able to read, interpret, and work from engineering prints, drawings, and sketches.
Have good computer skills.
Have excellent math skills (Algebra, Trigonometry, Geometry).
Be able inspect and be responsible for the quality of your own work.
Must be a team player with a good attitude.
Be flexible and multi-tasking.
A sense of humor is appreciated
ISO9000 or AS9100 experience a plus.
Gear cutting and inspection knowledge is a plus, but not required.
Company uses Mitutoyo CMM with Cosmos software. Experience with gears would be a plus.
Bottom line requirements we need notes on with candidate submittal:
1.5+ years of parts inspection experience, preferably with aerospace parts.
2.CMM programming experience preferred.
3.Experience with Cosmos software preferred.
4.Experience with gears is a plus.
Chrome Parts Inspector
Williamson Employment is seeking a 2nd shift Lead Inspector for a quality containment company in Grand Rapids, MI. As a lead inspector you will be responsible for finalizing products after they have been inspected and sorted prior to being shipped directly to the customer.
Hours are 2 pm - 10 pm, overtime and Saturdays are required, hours may vary. If you are interested in working with us stop in to see us at 3940 Broadmoor in Kentwood, MI or 3514 Plainfield in Grand Rapids, MI Monday-Friday from 8am-3pm to apply or call us to schedule an appointment at 616.575.5627.
*1 year quality inspection experience
*Follow written and verbal instructions
*Steel toed boots/shoes and safety glasses
*Valid drivers license and vehicle
*Ability to work independently with minimal supervision
*Lifting of at least 25 lbs
*Nationwide Background Check
*Excellent attitude, attendance and performance
Inspecting products and sorting
Repetitive work: grasping, pulling, pushing, bending, squatting, kneeling, balancing, or gripping.
*Efficiently completing required paperwork
*Leading, motivating, and training quality inspectors
Experience the Williamson Difference:
*Great Benefits (Health Insurance, Vacation Pay, Referral Bonus, Weekly Pay, Verizon Discount)
*Locally owned and operated.
*Celebrating 25 years in business!
Williamson Employment Services, Inc. is an equal opportunity employer and will not discriminate in the assignment of its employees on the basis of race, color, creed, national origin, sex, age, disability or veteran status. Discriminating orders will not be honored.
Inspector Quality Control Inspector - 1St, 2Nd, & 3Rd Shifts
Pace Industries is North America's leading full-service die casting manufacturer. Our mission is to provide uncommon, creative die casting and support solutions that contribute to the success of our customers. Our die cast parts are used in automobiles, motorcycles, generators, snow mobiles, lawn mowers, washing machines, power hand tools, BBQ grills, commercial lighting and many other well-known products. You can have a significant impact on our cultural transformation.
The St. Paul Division produces aluminum die castings for highly cosmetic, complex and difficult-to-fill parts from concept to solution. Specializing in flash-free, net-shape production, we ensure that aluminum die cast components meet exact design specifications and are delivered on time and within budget.
Perform Quality Control functions as defined in procedures and work instructions to assure that customers receive good parts. Works with variable supervision to set up and operate any inspection equipment or gauging. Supports production operators by routinely auditing production processes and performing various inspections. Maintains a positive attitude towards problem solving and a commitment to continuous improvement.
Duties and Responsibilities:
Inspect and record all parts at specified frequencies, with specified lot size, in accordance with approved Quality Control procedures with calibrated gages and measuring devises to ascertain Quality.
Inspect and approve first piece production on any new set-ups.
Perform audit of warehouse to ensure product is properly packed, identified and stored as required by procedures and work instructions appropriate for part status.
Perform an audit of product to be shipped to ensure all move sheet steps have been completed and signed off, all contractually required paperwork is with product and product is properly packed.
Make sure all suspect parts have been properly tagged and sent to the designed holding areas.
Maintain files as per prescribed by work instructions on procedures.
Capable of learning computer skills necessary to perform spectrometer analysis and to generate metal department reports.
Prepare alloy samples for analysis.
Calibrate and maintain Spectrometer to operating specifications.
Operate Spectrometer for alloy analysis
Consult with the Quality Supervisor or the Quality Engineer on any matters pertaining to Quality of product or process.
Position can be exposed to a harsh operating environment, which includes: heat up to 100 degrees.
Perform other associated duties as needed to continue the productive operation of the department and division.
High school diploma or GED equivalent and 2 years' experience in quality assurance inspection.
Must understand concepts of geometric dimensioning, tolerancing and part inspection.
Previous experience in operation of CMM or demonstrate ability to be trained in operation of CMM.
Please note that the duties and requirements described herein are intended to represent general contents of this job. This is not to be construed as an exhaustive statement of duties and responsibilities.
Pace Industries has a strong commitment to the principle of diversity, and in that spirit, seeks a broad spectrum of candidates including women, minorities, veterans, and people with disabilities. Individuals with disabilities desiring accommodations in the application process should notify the hiring department by the application deadline.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!