Grader Meat Job Description Sample
QA Grader Production Technician 2ND Shift
Harvest Evaluation/ Grader
Previous meat processingexperience required
Be able to communicate written and verbally in English
Demonstrates good judgment, problem solving and decision making skills
Ability to work under pressure
Great customer service skills and professional demeanor
High School degree or equivalent required
Perform various duties as assigned
No more than 4 attendance points in the past 12 months
Ensure proper producer payments by entering hog tattoo numbers
Grade hogs for deficiencies
Probe hogs for fat analysis
Create demand by offering differentiated products and providing customer solutions
Develop a competitive pork value chain that delivers sustainable results with known and manageable risks
Increase market share and further processing capabilities through strategic acquisitions J
ffers a full range of benefits including health care, life insurance, and a 401 (K) plan.
s an equal opportunity employer.
Motor Grader Operator
BLYTHE CONSTRUCTION, INC., a Major Heavy Highway Construction Co. located in Charlotte, NC has immediate opening in our Asphalt Division for an Experienced Motor Grader Operator. We offer Competitive Wages, Vacation, Holidays, 401K, Health, Dental, Vision, and Wellness Plan. Description For 90 years, the professional men and women of Blythe Construction, Inc. have literally paved the way for hundreds of public and private projects that have supported the Southeast's rise to prominence. From large interstate highways to small commercial site development, Blythe Construction employees perform with pride and creativity. We approach every project with a dedication to efficiency, technology and, most of all, safety. Blythe Construction is proud to be a part of this area's history and development, and a partner in the Carolina’s future. General Description A Motor Grader Equipment Operator is an hourly-rated skilled craft position that performs on construction projects any combination of the duties described more fully, below. A Motor Grader Equipment Operator typically performs a wide variety of tasks, transferring from one task to another as the work flow dictates. Key Duties
Proper pre-start and daily Maintenance Including lubrication
Keep equipment clean and well maintained
Notify supervisor if equipment needs repair
Tire pressure checks
Monitor all engine gauges
Operating skills in blade control
Scrap and level dirt
Shape and blade sub grades
Balance and rough shaping of base course materials
Operate to fine grade specifications
Fine grade horizontal surfaces, shoulders and slopes
Grade plan requirements and set grade standards
Dressing of shoulders and slopes
Demonstrate the ability to lead a crew and delegate work within work scope
Understand production and quantity requirements
Utilize automatic grade control system
Schedule work and maintain production
Set forth specifications and plans
Understand basic survey nomenclature
Judge distance and slopes accurately
Make decision based on verifiable standards
Perform incidental work items and duties included within other crafts Qualification Requirements General. To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and Experience. This position typically is not an entry-level job, as it requires demonstrable previous experience as a Motor Grader Equipment Operator. A high school diploma or general education degree (GED) is preferred. Must be able to understand work directions and communicate effectively with job site supervisors and fellow employees. Three (3) to Five (5) years or more of industry related experience is required for this position, with an emphasis on roads, highways, and bridges.
Physical Demands. The following physical demands are representative of those that must be met by a Motor Grader Equipment Operator to successfully perform the essential functions of this job.
Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties.
Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools.
Ability to lift and carry, on a frequent basis, at least 50-90 pounds personally, and up to 150 pounds with assistance.
Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment.
Frequently walk on uneven surfaces, including natural ground in varying weather conditions.
The Operator must be able to climb on and off heavy mobile equipment safely.
Work Environment. The work environment characteristics described below are representative of those that a Motor Grader Equipment Operator encounters while performing the essential functions of this job.
Work is performed outdoors in all weather conditions.
Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project.
Employee regularly works near heavy equipment and moving machinery.
Work may involve a variety of substances commonly found on construction sites such as form oil, grease, curing compounds, gasoline, diesel fuel and ready mixed concrete. Applicants may apply by; this website, calling 704-375-8474, faxing resume to 704-375-8140 or to our office located at 2911 N Graham St, Charlotte, NC 28206 We promote a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply.
Asphalt Screed And Motor Grader Operator
COUGHLIN COMPANY IS NOW HIRING
Asphalt Screed Operator/Foreman-Must be able to run a small 8 man Crew
- all benefits and great hourly wage
- got to be willing to travel out of state
- 5 years experience
- $60,000 to $70,000
Motor Grader Operator with automation controls
- 5 years experience
Email Ted to schedule an interview, email@example.com
Motor Grader Operators (1)
Gibbs & Register, Inc. Florida's leading civil firm is seeking an experienced Motor Grader Operator.
Will be working in Orlando, Lakeland/Bartow, Tampa, and other Florida markets.
Employees operating a vehicle for Work Site Employer’s purposes will be required to maintain a valid, eligible driver’s license, and a driving record acceptable to our insurance carrier at all times. Requires previous experience minimum of 3 years. Job requires frequent lifting of 25 - 100 lbs., stretching, stooping, bending, squatting, twisting, lifting, pushing, pulling, and kneeling.
We offer a competitive salary & comprehensive benefits package. G&R is proud to be an Equal Opportunity Employer and Drug Free Workplace. Applications will only be accepted for open and available positions. Applications may be completed on our website www.gibbsandregister.com, and emailed to our HR department or faxed to 407-877-1663.
We will be a company that.....G.I.V.E.S.
Golden Rule: Treat others the way you want to be treated
Interact with integrity, professionalism, and friendliness
Safe place people enjoy working
Motor Grader Operator
In order to apply for the position, please take seven (7) minutes to complete our survey. Copy and paste the following link into your browser, http://www.cindexinc.com/c/B2E206, and keep reading.
ONLY CANDIDATES THAT COMPLETE THE SURVEY WILL BE CONSIDERED FOR THE POSITION.
Under the direction of the Foreman, the Motor Grader Operator is responsible for excavation and embankment to grade and will lay asphalt, base and other materials. The Motor Grader Operator will primarily perform finish grade work to blue tops or other close specification controls/tolerances. May also grade haul roads and perform other general motor grader work.
Primary Responsibilities/Essential Functions:
- Operates the motor grader in order to prep sub-grade, lay asphalt, base and other materials.
- Performs daily inspection on equipment for issues and/or deficiencies; completes inspection paperwork and notifies the Foreman of any issues/defects.
- May assist the crew, when needed, in operating other equipment and/or helping the laborers on the ground.
- Wears appropriate personal protective equipment (PPE) at all times while on the job site (i.e. vest, earplugs, glasses, hard hat, etc.)
- Performs other duties as assigned
- 5+ years of experience as Finish Motor Grader is required with the ability to adhere to strict inspection guidelines.
- Demonstrates accuracy and thoroughness in the quality of the work; strong attention to details skills required.
- Demonstrates the ability to complete the work in a timely manner
- Demonstrates good eye-hand coordination, balance and depth perception
- Demonstrates effective written and oral communication skills.
- Demonstrates a sense of urgency in responding to all situations.
- Demonstrates the ability to work in a number of diverse locations, as work locations change regularly, and ability to work varying schedules. Overtime and weekend work are required, as necessary.
- Demonstrates ability to collaborate and work effectively as a team.
- Demonstrates responsibility in reporting to work on a consistent and timely basis.
The Motor Grader Operator while performing the essential functions of this job is regularly exposed to moving mechanical parts and vibration. The Operator is frequently exposed to high, precarious places or outside weather conditions. The Operator can be exposed to fumes or airborne particles. The noise level in the work environment is usually very loud.
While performing the essential functions of the job, the Operator is regularly required to stand, walk, use hands to finger, handle, or feel objects, reach with hands and arms, lift above their head, and talk or hear. The Operator is also required to kneel, crouch or stoop, climb ladders, bend at the waist, squat and crawl in tight or confined spaces to perform the essential functions of the job. The Operator must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and color vision. Ascending or descending stairs is required, and movement of uneven terrain is frequently required to carry out essential duties.
The Operator will spend their time on the physical job-site. This position is exposed to high temperatures, cool/cold temperatures and loud noises. Work in the construction area poses significantly greater risk due to moving construction equipment and active construction zones with trip and fall hazards.
E-Z Bel Construction, LLC is an Equal Opportunity Employer
Minorities, females, disabled persons and veterans are strongly encouraged to apply.
Our core clients include the City of San Antonio, Texas Department of Transportation (TXDOT), San Antonio area municipalities and various developers.
E-Z Bel is known to take on complicated projects with significant traffic control and constructability issues. Although the Company primarily operates as a general contractor, E-Z Bel also has a full service traffic signal and roadway illumination department that performs both as a prime contractor and a subcontractor.
Grader operator needed for full site development work. Two years experience preferred. Pay commensurate with experience with a competitive benefits package and a safe work environment! Clean MVR required, as foreman will utilize company vehicle.
Key Responsibilities (Essential Duties and Functions)
- Understands and applies safe use and operation of the equipment and communicates with other employees about safety related matters.
- Performs all functions in a safe manner in accordance with company policy and procedures.
- Safe, efficient and proper operation of grader to gouge out, level and distribute earth and/or rocks from land preparation to constructing roads and/or job site grading.
- Moves levers to control tool bars, carriers, and disks.
- Moves levers and depresses pedals to maneuver tractor and raise, lower and tilt blade to clear right-of-way.
- Feels lever and listens for stalling action of engine to estimate depth of cut.
- Operate grader in successive passes over terrain to raise or lower terrain to specified grade following markings on grade stakes or hand signals.
- Communicate with Site Superintendent as to the daily job specification.
- Discuss with supervisor the anticipated production, type of materials being moved, number of trucks, etc.
- Be aware of other equipment working on the project and coordinate to work with these other equipment.
- Ability to read, interpret and incorporate information derived from the manual for the specific piece of equipment being operated.
- Conduct daily pre-start up procedures, ensuring equipment is in good operating condition (check fluid levels, inspect, clean and lubricate equipment, etc.).
- Greases, oils, and performs minor repairs on tractor.
- Keep equipment clean, promoting positive public image, and enabling close range equipment inspection.
- Complete Equipment and Vehicle Condition Report (LAMP-68) weekly, noting odometer readings, equipment hours, needed repairs, etc.
- Parks equipment in a place that is readily accessible to the equipment mover.
- Maintain a positive attitude and team spirit.
- Reports to work on time wearing the appropriate attire.
- Must be able to work variable hours including daytime, nighttime, and some weekend hours, as well as, overtime.
- Ability to travel inside the company's operational area.
- Display a professional attitude toward co-workers, supervisors, and the general public at all times.
- Ability to perform strenuous work in varying weather conditions.
- Ability to follow verbal and written instruction.
While performing the duties of this job, the employee is regularly required to talk and hear. The employee is required to sit, walk and stand for periods of time. The employee is required to use a phone application to enter crew time. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust to focus.
- Ability to occasionally kneel and squat
- Will frequently bend, climb, stand, walk, sit, reach, and use repetitive motion
SDC is a Drug Free Workplace and Equal Opportunity Employer
Since 1986, Southern Development & Construction has completed a diversity of projects. Southern Development & Construction takes pride in maintaining our outstanding reputation by providing construction excellence with personal attention.
Southern Development and Construction is a specialized organization with extensive total site development experience.
Since 1986 - Bonded- Insured- Licensed
Agriculture Commodity Grader II
Summary The Agriculture Commodity Grader II is responsible for providing technical supervision of company employees and for monitoring poultry and poultry products to ensure compliance with established standards. This position is governed by United States Department of Agriculture (USDA) regulations, state and federal laws and agency policy.
Typical Functions Monitors temperatures and relative humidity in the coolers; checks temperatures of the washers, the individual egg, and the final rinse according to established procedures. Tests the sanitizer spray rinse to ensure compliance with USDA requirements.
Verifies the accuracy of individual and bulk scales. Monitors and verifies the grading of poultry and poultry products performed by industry graders by observing, examining samples of finished products, counting, weighing, and checking temperature to ensure compliance with USDA regulations. Performs pre-operational sanitation inspection of the plant facility according to the USDA standards.
Inspects poultry processed under government contract by examining product to determineconformance with specifications. Issues certificates for shipping, verifying compliance withregulations. Inspects trucks used for shipping poultry and poultry products for cleanliness and temperature control.
Trains selected industry personnel to grade poultry to USDA standards, and notifies processing plant management of grading/operational problems andrecommends corrective action. Contacts plant management of non-compliance standards and/or safety hazards; recommends corrective action. Maintains USDA Shell Egg and Poultry regulations and instruction manuals. Performs other duties as assigned.
Special Job Dimensions Shift work is required. Exposure to varying temperatures and humidity levels is required. Frequent in-state travel is required.
Knowledge, Abilities, and Skills Knowledge of USDA grading and instructional manuals. Knowledge of shell egg and poultry processing equipment.
Ability to pass a standardized test on federal regulations governing the grading and inspection of poultry and/or poultry products. Ability to perform/monitor on-site inspections to determine/verify compliance with USDA standards and recommend corrective action. Ability to complete and submit required documents and reports in accordance with established procedures.
Ability to inspect facilities and equipment for cleanliness. Ability to perform commodity grading. Ability to oversee the work of industry poultry graders. Minimum Education and/or Experience The formal education equivalent of a high school diploma; plus three years of experience in poultry inspection, commodity grading or a related field.
Preferred QualificationsCertificates, Licenses, Registrations Must be licensed as a poultry and/or shell egg grader by the USDA as established by the Agricultural Marketing Act of 1946 as amended (7USC 1621). Must possess a valid Arkansas driver’s license. Additional requirements determined by the agency for recruiting purposes require review and approval by the Office of Personnel Management. OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE.
Agency Specific Information This is an evening shift position in Berryville, AR. After training is completed, employee will be license with USDA.
Motor Grader Operator - PCC Paving Division
Company Info The success Manatts, Inc., enjoys today in the construction industry started more than 60 years ago. Back then, it was one man, one truck, and now our team of employees numbers more than 700 strong. We have dozens of ready-mix and asphalt production facilities around the state of Iowa. Our massive fleet of dump and ready-mix trucks serves thousands of job sites every year. In addition, our concrete and asphalt paving divisions, along with our various other crews, complete hundreds of projects every season. Job Description Our PCC Paving Division has an opening for the 2017 construction season for an experienced Motor Grader Operator. This position involves operating self-propelled grader to spread and level dirt, gravel, and stone, to grade specifications. This individual may be required to operate various pieces of equipment and perform other miscellaneous duties.
Qualified applicants must have previous motor grader operating experience
Other equipment operating experience a plus
Valid driver’s license and acceptable driving record required
CDL license preferred This is a full-time seasonal position based out of Brooklyn, Iowa, which requires travel during the construction season. This individual will start working as soon as weather permits. Benefits
Life and AD&D Insurance + 401K Retirement Plan
Short Term Disability Insurance
Per Diem, per Company policy For a complete benefits listing or to learn more about Manatts, Inc., visit www.manatts.com.
Quality Assurance Grader
General Purpose of the Position:
To ensure all product passing through the grading lines are within USDA grad, of good quality and meet food safety standards before returning to the warehouse
Essential Duties and
* This position works in a refrigerated warehouse area.
Grade all product for defects, such as mold, decay, puncture wounds and other defects which would cause the product not to meet USDA 85%, quality and food safety standards.
Achieve zero loss through product damage.
Maintain a clean and safe work area. All trash, boxes and debris must be picked up throughout the work shift and before leaving for the day.
Minimize the possibility of an accident to self and others; bring unsafe conditions to supervisor's attention.
Maintains a neat appearance and manner at all times while on the job.
Helps to maintain sanitary conditions in the warehouse.
Position interfaces with other grader associates, Production Supervisor and QA team.
Should possess ability to function as one of a team as well as complete duties safely.
Good attendance and adherence to work schedule.
Performs additional duties as assigned/directed by Supervisor.
NON-PHYSICAL * High School degree preferred. * 1 year related warehouse experience preferred.
- Ability to read printed information on labels and warehouse aisle shelves in English.
PHYSICAL * Ability to lift and move cases weighing up to 50 lbs. continuously.
Able to be exposed to cold room temperatures ranging from 32 degrees to freezing temperatures in the warehouse. Location: Florida - Pompano Beach / Ft. Lauderdale
Job Code:* WHS124 # of openings: 5
Rough Grade Motor Grader Operator
Operate a Caterpillar Motor Grader to perform various types of work such as but not limited to placing borrow material, maintaining haul roads, excavating and slope work. Also, perform rough grade and learn to fine grade task on sub-grade and stone base to meet NCDOT specifications.
Job Duties & Responsibilities:
Operating a motor grader in the Greenville/Ayden, NC area.
Must be able to perform walk around inspections of equipment before operation and at the end of shift.
Be versatile in other types of heavy equipment is a plus.
Job entails being very productive in all aspects of DOT work. Minimum Qualifications & Training:
Experience/seeking for minimum 1 year in rough grade operation with a motor grader. Will train the candidate that shows potential in other operations and task.
Ability to understand grade stakes and a knowledge of GPS operation is a plus.
Ability to abide by strict but necessary safety rules, policies and follow instructions.
Must be a reliable/trustworthy team player.
Maintain a good attendance and safety record. Tasks Essential to Job Functions:
Occasional standing and walking required.
Ability to work long periods of time while sitting in the operator's station.
Ability to operate equipment at recommended speeds and peaks of operation.
Must be productive during each shift and be willing to meet the goals that are set.
Visual activity - ability to develop a mental picture of the finished product and then execute the necessary skills to productively complete each required task. What We Offer:
Choice of Health Insurance options (BCBSNC)
Short Term Disability Insurance
Paid Time Off + 401(k)
Employee Assistance Program (EAP)
Corporate Chaplains of America
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!