Grinder Hardboard Job Description Sample
Our company offers a choice array of benefit programs that is among the best in our industry. Our benefit package includes Medical (HRA), Dental and Vision Insurance; Basic Life, AD&D and Voluntary Life Insurance; Short Term Disability and Voluntary Long Term Disability; Paid Holidays and Vacation; generous 401(k) company match at 100% up to 4.25% of salary; Flexible Spending Account and an Employee Assistance Program
DAY 5:00 a.m. - 5:00 p.m., Rotating 12 hour shifts, 36/48
In this position an employee collects and grinds all the scrap plastic for recycling.
Prepares sufficient supply of clean gaylords with bags inserted
Correctly segregates and identifies different materials such as OPS, PET or other plastics
Feeds grinder so as to prevent jams or other malfunctions due to improper handling
Able to clean any and all grinders and knows the proper operation and cleaning of the Torrit dust collectors
Understands and adheres to lockout/tagout procedures any time a machine is being cleaned or maintained
Properly cover, shrink-wrap and label filled gaylords after shredding
Insert the probe into the center of the Gaylord Caution should be used to not puncture the bottom of the bag or Gaylord and turn it side to side then remove it from the Gaylord and empty the contents of the probe by turning it upside down into a small plastic bag
If there are no signs of contamination, fold the inner bag to completely seal contents as best as possible
Any sign of contamination must be brought to the attention of Supervision and the Gaylord will be isolated from the main flow of the process and tagged with an On Hold tag
Wrap entire top area and any openings of Corrugated Gaylord with stretch wrap to secure cardboard sheet(s) and regrind flake. Wrap the Gaylord about 1/3 of the way down the sides to prevent contamination
Take completed Corrugated Gaylord to waiting area for Warehouse Operators to stage for transport
Moves gay-lords to the proper area for pick-up by Warehouse Operator.
Accurately and consistently performs administrative tasks such as properly weighing, tagging and recording of information
Practices good housekeeping including clutter-free work area and general cleaning; follows auditing standards as it pertains to employee
Practices safe work habits and follow general safety procedures such as proper lifting and bending, ergonomics, proper use of equipment and use of personal protection equipment (PPE).
Safely operates the grinder and related equipment
Follows Product Safety and Quality standards and IPC product defense standards and complies with all SQF requirements
Must be forklift certified
Generally willing to work overtime
Follows FDA GMPs in regards to food contact packaging as it pertains to the employee
Practices safe work habits and follows general safety procedures such as proper lifting and bending, ergonomics, proper use of equipment and use of personal protection equipment (PPE)
Practices good housekeeping including clutter-free work area and general cleaning; follows FDA product safety standards.
Maintains regular and consistent attendance.
Other duties as assigned.
Duties and Responsibilities
No prior experience needed. Three months of experience in a manufacturing environment is helpful
Forklift experience required
Must be able to take direction and communicate in English as well as read and understand written documents, such as safety rules, operating and maintenance instructions.
Must be able to count and perform simple addition and subtraction.
Must be able to apply commonsense understanding to carry out simple one or two-step instructions.
In a 12-hour shift while performing this job, the employee may sit, stand or walk.
Physical activities include lifting, reaching, pushing, pulling, bending and twisting.
Pallet stacking or unstacking of boxes 25-50 lbs. is performed rarely.
700-1300 lbs. pallets are occasionally pulled (12-13 pallets/day) approximately 40' with a pallet jack.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
While performing this job, the employee may stand or walk around.
This grinder is occasionally required to perform gross manual dexterity tasks including assembling boxes and placing plastic liners in them.
Kneeling on floor and pulling roll of rewind from machine.
Under limited supervision, maintain the high standards associated with Oberg Industries and produce accurate high-quality components by inspecting parts before grinding to check for chips or cracks, verify the dimensions of the work piece to match with the dimensions on the blueprints, inspect parts that are received from other departments, offer input on how to improve the operations, record how much time is spent on each job, inspect blue prints for inconsistencies as well as set-up and operate manual surface grinding equipment. Must be able to fixture and design methods of manufacturing complex parts and maintain a clean and orderly work area.
Physical demands of the job include working in a standing, sitting, or bent position for 10 hours/day and must be able to lift a minimum of 25 pounds with control, and be able to work near moving mechanical parts that create a moderately high noise level. The successful candidate must have the ability and interpersonal skills to successfully work as a team member, be able to understand and apply work-related documents such as operating manuals, be able to understand and perform to job-related standards, methods, and usage of inspection devices, read and understand blueprints, be able to locate, diagnose and correct problems in equipment and systems, possess knowledge of algebra, geometry, and trigonometry, and be able to communicate through written and verbal means. The successful candidate will have a high school diploma or equivalent and successful completion of 4 year surface grinding apprentice program or possess equivalent experience. Must be able to work 50 hours per week, be a US citizen, and travel both domestically and internationally.
Please respond in confidence by completing an Oberg job application and sending along with your credentials to: email@example.com or fax to:724-295-2210.
Grinder - 2Nd Shift
Job Title: Metal Parts Grinder – Swing Shift
Location: San Leandro, CA
To remove gating material, blend and grind casting surfaces to meet customer specifications.
1.Finish Grinding Objective: to grind and blend gating and defect areas on metal castings, and provide surface finishing within dimensional tolerances; to remove the minimum amount of metal necessary to remain within specified tolerances.
A. Reviews technique cards and blueprints to determine grinding requirements.
B. Determines stock removal requirements and tolerances for removal of gate material or other added metal stock.
C. Determines acceptance limits for grinding and blending defects.
D. Uses counter-balanced belt grinders, fixed grinders, held-held grinders, air tools, and hand tools including files and mirrors to grind and polish casting areas.
E. Wears required protective shields, clothing, wrist supports, glasses and gloves during grinding operations.
F. Visually inspects castings during grinding operations to assure compliance with specifications.
G. Makes dimensional measurements on specified parts to assure compliance with specifications; marks undersized areas for further inspection.
2.Safety Objective: to take responsibility for and demonstrate safe work practices.
NOTE: For job positions that require respiratory protection (more than a filtering face piece – dust mask):
A. Adheres to plant and department safety rules.
B. Safely operates all equipment and tools.
C. Identifies and reports safety problems.
D. May be required to handle hazardous waste.
E. Performs minor maintenance and changes belts on equipment.
F. Accurately completes logs and records in a timely manner
G. Performs other tasks as directed.
H. May provide training and work direction to others.
A. Training is provided on the job. Opportunities for wage increases and advancing position
B. Tuition Reimbursement benefit is available
1.Grinding skills and working knowledge of grinding tools, equipment, and materials.
An equivalent combination of training and work experience.
2.Ability to follow instructions, read, write and perform basic arithmetic calculations.
3.Ability to read, interpret and follow specifications on Technique Cards.
4.Ability to lift and/or maneuver objects weighing thirty to fifty pounds and occasionally up to eighty pounds.
5.Ability to work in difficult working conditions which may include exposure to noise, dust, temperature extremes and other elements for extended periods of time.
Precision Cast Parts Corporation (PCC), a Berkshire Hathaway company, is the world's leader in investment casting of precision parts for a variety of components, primarily noted for delivery on advancements in jet and rocket propulsion engines. Go to www.precast.com for the incredible story about the corporation.
This position is located in one of 190 such plants globally, however, one that specializes in small precision-made complex parts which require a great deal of engineering, a bit of metallurgic magic and hand-crafted workmanship. It really is STEAM – where Science, Technology, Engineering, Artistry and Mathematics all come together!
This particular plant started as a family operation in 1956 and still maintains that family and maker feel, although we are growing at 20% per year. Since 1956, we were quietly honing our craft until aviation and technology caught up.
Now, we find ourselves at the intersection of SpaceX commute rockets and our ability to work with super alloys to create incredibly thin walled, complex small parts for rocket and jet propulsion. For the whole story, you'll want to come in for a tour.
We are located at 414 Hester Street, San Leandro, CA.
Fax resume to (510) 225-4104, or
Apply on the corporate website: https://careers.precast.com
Why join the Structurals Team?
The Structurals Division is run by leaders who when faced with problems choose to see it, solve it, drive it and own it. We are smart, resourceful, "Type A Personalities" who are committed to winning daily. We are completely comfortable challenging upwards, focused on finding innovative solutions and able to roll up our shirt sleeves and operate tactically, yet think strategically.
Precision Castparts is the world leader in structural investment castings, forged components, and airfoil castings for aircraft engines and industrial gas turbines. Airbus, Boeing, GE, Rolls-Royce, and many other leading manufacturers depend on us for critical airframe, engine, power generation, medical, and general industrial components. With few exceptions, every aircraft in the sky flies with parts made by PCC.
The Structurals Division is the world leader in manufacturing high-quality, complex investment castings for aircraft engine, industrial gas turbine, airframe, and other applications, including the world's largest diameter investment cast components.
FOR MORE INFORMATION ON PCC STRUCTURALS & PRECISION CASTPARTS CORP:
- < />< />PCC Structurals is committed to a diverse workforce. As Equal Opportunity Employer, VEVRAA Federal Contractor, affirmative action employer we provide equal opportunity to all persons, regardless of race, religion, age, gender, disability, status as a protected veteran, national origin, color, or any other classification in accordance with federal, state, and local statutes, regulations and ordinances "Minority/Female/Disability/Veteran Status/VEVRAA Federal Contractor". Veterans are encouraged to self-identify as PCC Structurals desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA).
In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact 503-652-3512 for assistance. PCC Structurals is a VEVRAA Federal Contractor committed to providing priority referrals of protected veterans for its openings.
Veterans are encouraged to self-identify as desires to provide protected veterans priority referrals for open positions. PCC Structurals complies with all laws and regulations associated with the Family Medical Leave Act (FMLA). If you would like more information about Equal Employment Opportunity as an applicant under the law, please visit www.eeoc.gov
Master Gear Machinist - Gear Grinder
Plan sequence of operations, lay out work, set up and operate multiple types of gear grinders.
Perform machining operations from drawings, sketches, engineering drawings and oral instructions. Perform difficult and complex machining involving exacting and coordinated tolerances. Determine cutting tools to be used and methods of holding and aligning work. Improvise and adapt toolings, attachments and other machining adis. Perform progressive machining operations as required.
Plan and set up machine tools to fully utilize machine's capacity and minimize amount of machining and number of setups required. Check own work for conformance to specifications.
Utilize a working knowledge and application of shop mathematics. Perform bench operations as required. Perform duties of Precision Machinist classification as required. Machine field tooling as required.
Requires a high school diploma or its equivalent.
Willing to work any shift
Experience in gear / teeth grinding
May have to complete an apprenticeship and/or formal training in area of specialty with 5 years of experience in gear grinding.
Familiar with a variety of the field's concepts, practices and procedures. '
Operates gear grinders.
A certain degree of creativity and latitude is required.
Typically reports to a team lead/supervisor/manager.
Tool & Die Broach Grinder (Tdm1)
The Tool and Die Broach Grinder (TDM1) sharpens and smoothes cutting edge of tools such as broaches, drills and coordinates the broach usage for all departments to facilitate production or procurement of tooling by performing the following duties.
1st shift: 6:00am
2nd shift 2:30pm
3rd shift: 10:00pm
- overtime may be required*
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Coordinates the broach usage for all departments, determines the condition of tooling and the need to re-sharpen tooling and keep the supply cabinet up to date and stocked. Make new and/ or re-sharpened broaches, drills and end mills as needed. Train fellow associates in cutter grinding techniques. Work with supervisors on the proper use and care of broach tooling.
- Supervisory Responsibilities
This job has no supervisory responsibilities.
To perform the job successfully, an individual should demonstrate the following competencies :
Safety and Security
Education and/or Experience
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Basic computer knowledge with Microsoft Applications.
Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is frequently required to sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Ideal Carbide Die Company is seeking an experienced Precision grinder to join our team in Bolingbrook, IL. The Precision Grinder will set up and operate grinding machines. The ideal candidate will be a self-starter with 5+ years of machine shop experience.
Ideal Carbide Die Company, founded in 1953, is a worldwide supplier of tooling to various industries. We are known for the safety of our employees and in keeping with our mission, Ideal Carbide Die Company provides the safest possible work environment for our employees.
Setup and operate grinding machines
Perform set-up using tooling and fixtures
High School diploma or equivalent
5+ years machine shop experience in job shop environment
2 years of experience in any, or all of the following
Visual grinding (Reid, B&S)
Surface grinding (Okamoto)
Rotary grinding (Heald)
O.D. grinding (Tschudin, Toyoda)
Ability to read prints
Knowledge to use all inspection tools
Strong math skills
Must have required machinist tools
Manufacturing Specialist I - Grinder
When the global aerospace community looks for ideas and solutions to its biggest challenges, they turn to the people of UTC Aerospace Systems. We design, invent and deliver the most advanced and diverse range of aerospace systems on the market. We are inventors. We are manufacturers. We work in space exploration, commercial air travel, defense and rescue applications. Always learning and pushing the boundaries, we are an undisputed industry leader that continually sets the bar higher and higher. Come soar with us.
As part of the Sensors & Integrated Systems (SIS) team, you'll help develop the next generation of more intelligent, more integrated and more reliable solutions that enhance aircraft safety and performance in the most rigorous flight conditions. We have 100 years of experience, a phenomenal product portfolio, state-of-the-art test labs and the resources to make your ideas shine.
Test and calibrate parts.
Accurately read blueprints.
Demonstrate proper use of hand and machine tools.
Demonstrate proper use of electrical/mechanical measuring devices.
Take ownership for the accuracy of processes and resulting costs.
Accurately read and follow procedures, routing, and other work instructions.
Responsible for quality.
Meet customer deadlines.
Responsible for building parts that meet customer expectations.
Responsible to comply with applicable elements of quality systems.
Ability to work successfully in a team environment.
Ability to plan and prioritize work to met production schedules and quality requirements.
Coordinate production to meet deadlines and quality requirements.
Ability to handle multiple tasks.
Acquire applicable skill/knowledge/certifications as required..
Understand end uses of products being built.
Request tools and supplies in accordance with project requirements.
Comply with safety and hazardous waste disposal programs.
Ability to train/coach others as needed.
Demonstrate a proactive role in problem solving
Understand use of SPC
Demonstrates initiative to keep processes moving and on schedule.
Understand and use computer tools such as Oracle, Unisearch and Sitehawk.
Achieve special process certification where applicable.
Perform process inspection.
Communicate/Exchange work-related information with other areas per process monitor program.
Interface with other functional groups to update, inform, acknowledge or resolve problems related to business issues.
Effectively interact with others.
Meet cost goals and determine measures to obtain those goals.
Participate in cost reduction plans.
Participate in waste minimization efforts.
Participate in audits
Maintenance Roll Grinder
Job Description: A Roll Grinder performs the following job duties:
Grind large mill rolls to specified shapes and finishes.
Select, balance and install grinding wheels.
Check surface quality, hardness and shape with perthometer, equo-tip, micrometer, caliper and depth micrometer.
Read and interpret blue prints and sketches.
Adjust, lubricate and maintain roll grinding machines.
Perform mechanical repair of roll grinding machines and shop equipment.
Enter roll grinding information into a computerized roll management system.
Inspect and repair roll neck bearings and chocks.
Assemble and disassemble large rolls, chocks and bearings.
Operate overhead crane from cab, pendant and radio control.
Operate fork truck.
Order parts and supplies.
The successful candidate will be required to complete a 6-month probationary period.
Employee must be able to perform essential job functions of this department.
High school or GED required.
Candidate must be a journey-level Roll Grinder or Machinist or have equivalent experience (2 years verifiable experience working as a Roll Grinder, Machinist, Machine or Equipment repair and 3 years verifiable general mechanic experience).
Pass mechanical aptitude test.
Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
Experience programming and operating computer controlled equipment.
Columbia Steel Casting Co., Inc. is a worldwide renowned manufacturer, providing premium quality replacement wear parts for a wide range of industries (mining, aggregate, cement, coal, scrap recycling and more). A Portland-based company for over 115 years, Columbia Steel is located in north Portland at Marine Drive and North Portland Road, right off of I-5. A benefits package including medical, dental, vision, and retirement, is offered to our employees.
The grinders use air or electric grinders (5 to 15 lbs, depending on the job) to remove excess metal from manganese and alloy steel castings.
Responsiblities and Duties:
Set an example of excellent performance while keeping safety in mind, and performing your assigned tasks in the safest manner as possible, and to encourage co-workers to strive for excellence while maintaining a safe working environment.
Prepare rigging for crane operators who move the castings and foundry equipment in and out of the grinding stalls. (Casting weight range from 10 lbs to several thousand pounds.)
Hooking up rigging chain to crane hook (approx. 35 Ibs.) from floor to chest height, moving large castings, equipment through the Cleaning department.
Operate post or jib crane to move parts in the work stall. Shop clean up; sweeping, shoveling, and miscellaneous tasks assigned.
Knowledge, Skills and Abilities:
On the job training will be conducted.
Prior experience is not required, but is helpful in evaluating an individual's ability and willingness to perform the required job tasks.
Grinders must have the ability to perform repetitive tasks.
Typical Work Conditions:
Very physical repetitive, and fast paced work environment - Hot, dirty, dusty, smoky, fumes, high vibration and noise in exposure up to 85 db on an average of 8 hours a day.
Standing or walking 6-8 hours a day.
Constant use of the hands with high vibration grinding tools (5 - 8 hours a day).
Production Grinder 2Nd Shift (20180520)
To adjust/operate CNC grinding and balancing equipment including the replacement and adjustment of grinding wheels (to include CNC grinding wheels). Required to adjust offsets and perform program editing on all CNC and NC grinding machines.
Parts must be made to print and process specifications.
Maintain and operate filtration system.
Responsible for own set-ups, and for inspecting own parts, including in-process inspection records.
Responsible for following safety rules, producing quality workmanship, and for good housekeeping in and around the work area.
Completion of all associated paperwork and recordkeeping as required.
High school diploma or equivalent.
Core skills training in basic shop math, measuring tools and blueprint reading or demonstrated equivalent knowledge is required.
Knowledge in machine shop practices and the use of respective inspection instruments used in inspecting own parts. Additional required courses include: Progressional CNC training or demonstrate equivalent knowledge.
About The Toro Company:
The Toro Company (NYSE: TTC) is a leading worldwide provider of innovative solutions for the outdoor environment, including turf, snow and ground-engaging equipment, and irrigation and outdoor lighting solutions.
For over 100 years, our ideas have transformed the way professionals and homeowners care for their outdoors, including many leading sports venues and historic sites around the world. Across our strong family of brands, our success is founded on building trusted relationships, creating innovative products and following ethical business practices - ideals shared by our nearly 7,000 employees around the world. With sales of $2.4 billion in fiscal 2015, Toro consistently delivers strong financial performance and market leadership.
We are proud to be an equal opportunity employer including protected veterans and individuals with disabilities
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!