Hairspring Assembler Job Description Sample
Electro-Mechanical Assembler / Technical Assembler / Production Assembler
Job Description: :
Lockheed Martin Space Systems Company is seeking candidates who are energized and passionate about helping us build the space technologies of tomorrow. We are going to Mars and beyond! Join us in the journey!
The Assembler will support production activities in either the Chemical Mix Lab or Battery Work Center at the Littleton, CO manufacturing facility. Successful candidates will be able to demonstrate skills and abilities necessary to assemble, document and validate products manufactured within the work area. A continuous improvement mindset, focus on world-class quality, and the ability to work effectively within a team environment are key assets.
Candidates will be required to take courses and pass subsequent written and practical application tests as a contingency to employment in the following disciplines:
- Connector Mate & Demate
- NASA Cable & Harness
- NASA Polymerics
- Hardware Torqueing
- Adhesive Bonding
- JSTD001MAP Solder Certification
Entry Level candidates will possess applicable experience where mechanical skills and aptitude are valued. Entry Level candidates will be considered for the Chemical Mix Lab only.
Mid to Advance Level candidates will possess experience in electromechanical or electronics manufacturing environments where successful hands-on experience in mechanical assembly, soldering and harness fabrication were performed. Mid to Advance Level candidates may be considered for multiple opportunities.
- Must display maturity of action and judgment with a demonstrated track record of resourcefulness from previous assignments.
- Must be able to read and comprehend detailed work instructions, engineering drawings & specifications.
- Mechanical aptitude required.
- Must be able to perform basic arithmetic functions for weight measurements, torque conversions, temperature conversions and dimensional measurements.
- Ability to work second shift if required, weekends and holidays in accordance with the collective bargaining agreement.
- Employment is contingent upon successful completion and maintenance of all required certifications.
- This position will be located at a facility that requires approved entry access.
- Experience with the mixing of materials for flight hardware coating, bonding, and staking applications.
- Solder, bonding and coating certifications.
- Cable and harness manufacturing experience.
- Box/Module assembly experience.
- Prior Solder Fountain or Wave Solder experience
- Prior Automated SMT equipment experience.
- Prior experience in PCBA or CCA Manufacturing to include hand soldering of SMT and PTH components.
- Prior experience in Space Systems assembly to include electronic and mechanical fabrication.
- Prior experience in electrical testing and/or in-line inspections and verifications.
- Experience with new product introductions, continuous improvement, cost and quality optimization on the production floor is highly desired.
- Previous industry related certifications to include: IPC Soldering and Cabling Certifications, NASA Hand Solder, J-STD, Hardware Torqueing, Adhesive Bonding, Polymerics, Connector Mate & De-mate, NASA Cable Harness.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Job Location(s): Littleton Colorado
Security Clearance :
Business Unit :
ESS4400 SPACE SYSTEMS COMPANY
Job Class :
Job Category :
Relocation Available :
Work Schedule :
9x80A-9,9,9,9,8 hrs/d in wk1, /9,9,9,9,off in wk2
Req Type :
Additional Posting Locations :
Mechanical Assembler - 3Rd Shift - (26235)
Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.
Sanmina Corporation has an immediate opening for full-time Assemblers in our Carrollton TX facility.
This is a manufacturing position with onsite and on-the-job training.
Experience is helpful but not required.
Nature of Duties:
Our Assemblers perform a wide variety of assembly operations, which may vary from sitting to standing, moving line to stationary, with very light to medium weight components.
Assemblers read and follow detailed, color-coded instructions to perform intricate installation, hand soldering, wiring, harnessing and hardware assembly on circuit boards and other types of electronic assemblies.
Education and Experience:
Manual dexterity and hand-eye coordination is necessary and overtime is required when needed.
Must be able to lift 25-30 lbs
EEO Employer Vets/Disabled
Electrical/Electronic Assembler - (21983)
Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market.
Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.
JOB TITLE: Electrical/Electronic Assembler
JOB PURPOSE: Assemble electrical/electronic equipment, subassemblies, or components.
NATURE OF DUTIES:
1.Performs bench-type processes to complete electrical/electronic assemblies and subassemblies, using hand tools and equipment such as soldering iron, wire-cutters, electronic and pneumatic tooling.
2.Fits together electrical/electronic parts according to specified sequence.
3.Verifies completed assembly against specification.
4.Works under direct supervision on duties and tasks that are repetitive, using written instructions and established procedures.
5.Resolves routine questions and problems, referring only the most complex issues to higher levels.
6.Applies basic and develops advanced skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization.
7.Following established methods and procedures, must be able to perform operations necessary to assemble electrical/electronic assemblies.
EDUCATION AND EXPERIENCE:
1.High School Diploma or equivalent required
2.Use and be familiar with assembly and measuring tools, interpret visual aids.
3.Must demonstrate ability to solder using PB88 or HMP.
4.Minimum two (2) years experience
This job description should not be construed to imply that these requirements are the exclusive standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as may be required by their supervisor.
EEO Employer Vets/Disabled
Assembler - Air Separation
Cobham is seeking an Assembler – Air Separation that will assemble and disassemble air regulation products, in any state, from partial to complete, following instructions on work/analysis sheets. This position is located in Davenport, Iowa.
Assembles and disassembles air regulation products, in any state, from partial to complete, following instructions on work/analysis sheets
Replaces malfunctioning parts and or sub-assemblies, as necessary
Diagnoses, troubleshoots, and reworks non-conforming units in order to return them to acceptable status
Uses a variety of hand and paper tools, jigs, fixtures, gauges, and measuring and test equipment to produce finished air regulation units that meet all stated requirements
High School Diploma or GED Required
Minimum of 1 year experience in assembly and surface finish techniques; as well as experience using a variety of gauges to perform job tasks
Minimum of 1 year experience with reading and evaluating various types of readouts and presentations including blueprints, assembly drawings, sketches, and analysis sheets, to determine the status of units and/or their components
Minimum of 1 year experience with diagnosing and troubleshooting air regulation units using appropriate calibrating and test equipment
Minimum of 1 year experience reading and understanding technical and written instructions
Minimum of 1 year experience using various hand and power tools, jigs, fixtures, gauges, measuring and test equipment
This position requires access to technology, materials, software or hardware that is controlled by export laws of the US. In order to be eligible you must be either a US Citizen or Permanent Resident
Cobham's values of Trust, Talent and Technology have driven us from our launch in 1934 by Sir Alan Cobham, an aviation innovator, to becoming a global leader in state-of-the-art aerospace and defense systems. And it's the insights of our innovators today that will secure our collective future. Innovators like you.
Cobham is one of the world's leading companies engaged in the development, delivery and support of leading-edge aerospace and defense systems in the air, on land and at sea. Our clients and partners trust Cobham to deliver the mission-critical technology they need, and we trust our employees to draw on their ingenuity and passion to deliver those solutions. This leads to an empowering culture for our people. Our Leadership team is open, sharing plans for the next five years, driving retention by offering demanding, exciting work, and providing full guidance and mentoring.
Cobham is an Equal Opportunity/Affirmative Action Employer and embraces diversity in our employee population. It is the policy of Cobham to provide equal opportunity to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or genetic information. Cobham will refrain from discharging, or otherwise discriminating against, employees or applicants who inquire about, discuss, or disclose their compensation or the compensation of other employees or applicants.
See all of our latest opportunities at www.cobham.com/careers or follow us on our LinkedIn page at www.linkedin.com/company/cobham
To be considered you must apply by going to www.cobham.com/careers
2 Year Contract
- Must Have Experience Using Hand Tools*
Under direct supervision, performs routine and repetitive assembly operations and processes. Requires use of a few simple hand tools. Ensure work is accomplished with high quality, in a timely fashion and is compliant with all company, city, state and federal regulations.
Duties and Responsibilities:
Learn to set up and assemble parts.
Demonstrate proper use of simple hand and machine tools.
Learn to accurately read and follow procedures, routing and other work instructions.
Responsible for quality product standards with no defects.
Meet customer deadlines.
Responsible for building parts that meet customer expectations.
Responsible to comply with applicable elements of quality systems.
Participate in cost reduction plans and continuous improvement plans/events, as required.
Participate in audits.
Acquire applicable skill/knowledge/certifications as required.
Maintain materials, equipment, and work area in a clean and orderly condition.
Comply with all rules and regulations of United Technologies, including, but not limited to: Environmental Health and Safety, Ethics, International Trade Compliance and Human Resources.
Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
Check work methods and results for conformance to standards and re-instruct as required.
Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.
Other duties as assigned.
Job Description: Summary
Job DescriptionOne of the most highly respected MedicalTechnology Companies in the world, Becton Dickinson has been leading healthcare safety and technologies for more than a century. We are over 45,000 associates strong and growing!
We are looking for reliable, dedicated, mechanically inclined individuals to join our team!
The position also requires that all employees operate within plant safety and shop rules and maintain good housekeeping practices in the work area and plant.
As your skill level increases, there is opportunity to grow as the complexity of the operations levels increase.
HS Diploma or GED
Prefer 6+ months of experience working in a manufacturing environment preferably in assembly and manufacture with some measurement experience.
Ability to read blueprint is highly desirable.
Health Saving Plan
Pension Plan Program
Primary Work Location
USA MO - St Louis
Primary Work Location
Kaman Fluid Power, a division of Kaman Distribution, is a leading provider of motion control products offering all types of hydraulic and pneumatic cylinders, motors, pumps, filters, and valves as well as design and production of hydraulic power units, vacuum products, lubrication systems and complete turnkey engineered systems and solutions. We are committed to providing a high level of customer service delivered through a national network of branch and distribution centers.
We are seeking a dynamic and motivated Assembler to join our team in Caledonia, IL. This exciting opportunity involves reading schematics and assembly drawings in order to assemble electromechanical, hydraulic, and pneumatic systems.
Power your career with a company that powers the future.
Build and assemble systems (electromechanical, hydraulic, and pneumatic), sub-assemblies, and components as per engineered drawings
Read and interpret basic schematics and follow written work instructions
Communicate with supervisor on any engineering, print, or assembly discrepancies
Cut, bend, flare, swage and install various types of tubing for pneumatic, hydraulic, structural, and electrical applications
Operate power and hand tools typical of an industrial manufacturing environment (such as saws, grinders, drills, etc.)
Assemble, build, measure, cut, crimp, test, and perform related tasks for industrial hydraulic and pneumatic hose
Handle assembly of mechanical and electrical items
Operate painting and finishing equipment as required
Prepare equipment and assemblies for shipment
Maintain company standards for quality and performs basic testing on completed assemblies
Obtain certifications on applicable products such as parflange, hose crimping, PTAC, etc.
Exercise safe work habits and maintain a clean and safe working area
Miscellaneous duties as assigned
Assembler I Temporary
OSI Systems companies have a long history of developing innovative solutions to bring a better quality of life to the world. With more than 30 years of combined experience in the field of optoelectronics our OSI Optoelectronics (OSIO) division is a diversified manufacturer of standard and custom photodiodes and optical sensors for used in aerospace, defense, commercial and medical applications.
We are one of the largest global manufacturers of optoelectronic devices, delivering engineering design support and manufacturing capabilities that include products for use in the defense, aerospace, medical, and industrial markets, among others. We utilize our world-class manufacturing facilities in the U.S., India and Malaysia to continue to put forth excellent engineering solutions aligned with efficient manufacturing to meet high-volume production requirements.
OSI Optoelectronics is seeking an Assembler I to perform limited electronic and electro mechanical production assembly and assembly operations of repetitive nature to build up and assemble routine units.
Use small hand tools, soldering irons, tweezers, under microscope.
Works with epoxy and other chemicals.
Operates from Assembly drawings, diagrams, blueprints or previously established methods.
Uphold the company's core values of Integrity, Innovation, Accountability and Teamwork.
Demonstrates behavior consistent with the company's Code of Ethics and Conduct.
It is the responsibility of evey employee to report to their manager or a member of senior management any quality issue to avoid recurrence of the problem.
Performs other work-related duties, as assigned.
Uphold the company's core values of Integrity, Innovation, Accountability, and Teamwork
Demonstrate behavior consistent with the company's Code of Ethics and Conduct
It is the responsibility of every employee to report to their manager or a member of senior management any quality problems or defects in order for corrective action to be implemented and to avoid recurrence of the problem
Duties may be modified or assigned at any time to meet the needs of the business.
High school diploma or equivalent.
Knowledge of component identification.
Ability to understand Assembly drawings.
Ability to effectively read, write and communicate using English language.
Equal Opportunity Employer
EEO is the Law
Poster Link: http://www1.eeoc.gov/employers/upload/eeoc_self_print_poster.pdf
OSI Systems, Inc. has three operating divisions: (a) Security, providing security and inspection systems, turnkey security screening solutions and related services; (b) Healthcare, providing patient monitoring, diagnostic cardiology and anesthesia systems; and (c) Optoelectronics and Manufacturing, providing specialized electronic components and electronic manufacturing services for original equipment manufacturers with applications in the defense, aerospace, medical and industrial markets, among others.
Mechanical Assembler (2914-159)
OPPORTUNITY: We are a folding carton manufacturing operation seeking candidates to join our Menomonee Falls as a Mechanical Assembler. We offer outstanding opportunities for our employees to advance their careers through on the job training and job progression. These are skilled trade positions where our employees build successful careers in the Printing & Packaging industry. We offer a wide array of benefits including, but not limited to, Paid Vacation & Holidays, optional Health, Dental, and Life Insurance, health spending accounts as well as 401-K with matching funds. Employees may voluntarily elect Pet Insurance, Home & Auto Insurance Programs, Purchasing Power, Tuition Reimbursement, Aflac, Lifelock Identity Protection, and Hyatt Legal Services. Tabaco Cessation and Employee Assistance/Referral Program.
JOB SUMMARY: The Mechanical Assembler will effectively support the growing GPI Americas Converting maintenance, fabrication and rebuild center activities that support the Division's plant operations while working in a safe manner and obeying all safety and conduct rules. They understand and align business operations and Rebuild/Maintenance Department operations as he/she executes their role to exceed customer expectations and align with GPI business, cultural, financial and operational objectives.
JOB FUNCTIONS: Job functions include, but are not limited to the following.
New Equipment: Assemble paper converting equipment that is used in the manufacturing facilities for the manufacturing of paper cups and corrugated boxes.
Used Equipment; Disassemble, Clean, repair and rebuild paper converting equipment.
Identify and correct mechanical or electrical issues during the rebuilding process.
Participate in all Safety meetings and required Safety walk thru assessments.
Has working knowledge of machine shop equipment and has the ability to repair, machine and fabricate parts as needed and Has the ability to read assembly drawings and blue prints.
Other duties as assigned.
Schedules are regularly 8-hour M-F shifts. However, employees must have the ability to work alternate schedules (12 hour shift at plants) and overtime that may include early mornings, nights, and/or weekends and be punctual while doing so.
Travel to production plant locations to provide support for machine installation, machine repair and maintenance support. Overnight travel is required.
Sitting or standing, depending on changing job assignment, for extended periods.
Awkward and/or repetitive movements.
Lifting up to 50lbs.
Reading computer screen or other electronic devices.
Use of various hand and electrical tools and equipment.
Work in areas of fluctuating temperature.
GRAPHIC PACKAGING INTERNATIONAL, INC. is an Equal Opportunity Employer. All candidates will be evaluated on the basis of their qualifications for the job in question. We do not base our employment decision on an employee's or applicant's race, color, sex, age, religion, natural origin, sexual orientation, citizenship, handicap, or disability, marital status, veteran status or any other basis prohibited by local, state, or federal law.
Proficiency with the following:
Hand tools, power tools, horizontal and vertical saws, sand and ice blasters,
Precision measuring equipment
Machining tools, welders, grinders, lathes, milling machine, surface grinder, drills, hoists
Man lifts, fork lifts, parts washers
BACKGROUND / EXPERIENCE:
- 3 – 5 years Manufacturing experience preferred
EDUCATION / KNOWLEDGE:
- High School Diploma or equivalent (Technical Degree, etc.) required
JOB DUTIES AND ESSENTIAL FUNCTIONS:
Assemble retail merchandise such as grills, furniture, lawn equipment, farm equipment
Assemble and assist with merchandise displays
Mechanical abilities and experience
Able to follow assembly instructions
Ability to interact with the team in a fast paced environment, remaining flexible, proactive, resourceful and efficient
Ability to work independently without supervision
May be required to cross train and perform other duties
MACHINES AND EQUIPMENT USED:
General office equipment such as telephone, copy machine, fax machine, calculator, computer
Forklift, pallet jack, Telexon gun and other retail equipment
Good visual acuity and ability to communicate
Ability to repetitively lift, push, and/or pull a minimum of 30 pounds; ability to stand and/or walk for long periods
Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!