Harness Rigger Job Description Sample
Lead Harness Design Engineer
Lead Harness Design Engineer Satellite Development Apply for this position SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. LEAD HARNESS DESIGN ENGINEER (SATELLITES) RESPONSIBILITIES: Electro-Mechanical engineer responsible for end-to-end design and development of Harness assemblies for the next generation of SpaceX space vehicles.
Design and create 3D harness models within CAD environment.
Create proof of concept/ prototype parts, and participate in failure analysis.
Investigate, plan, design and develop harness to meet technical requirements in compliance with program constraints including cost and schedule.
Develop requirements, design, oversee fabrication and integration of harnesses for spacecraft
Pro-actively communicate and co-ordinate with engineers, designers, analysts including multiple other subsystems to negotiate interfaces.
Interact with others to perform cross-disciplines trade studies and analysis of alternatives through application of discipline-specific expertise.
Prepare and present harness subsystem design, architecture and implementation plans at various design team meetings and reviews.
Define mechanical bill of materials and configurations of top-level harness assemblies for spacecraft.
Responsible for design through fabrication and performance validation of harness assembly. interface with manufacturing, Integration and validation testing teams to finalize all harness designs and solve any build issues that might arise.
Create wire harness installation drawings, formboards, manufacturing and fabrication orders and wiring diagrams when necessary. BASIC QUALIFICATIONS:
Bachelor of Science degree in mechanical, electrical or aerospace engineering + 5+ years of work experience PREFERRED SKILLS AND EXPERIENCE:
Strong understanding and wide application of principles, theories, concepts and techniques in in design development of wire harness designs including: ability to interpret pertinent harness requirements from electrical wiring schematics to create wire lists, create harness assembly drawings, select parts and materials for flight harness assemblies, perform trade studies, prepare mass estimates, coordinate fabrication, assembly, testing and qualification of hardware.
Familiarity with industry and/or academic practices and standards across a range of applications related to electrical connectors and wire for spaceflight applications, including Mil-Aerospace standards such as MIL-C-38999, MIL-C-24308, Mil-83513, and MIL-STD-1553. Pertinent practices include selection of wiring based on current de-rating, voltage drop analysis, shielding effectiveness, temperature environment, outgassing and mechanical strength
Demonstrated ability to select electrical interconnects and shielding to meet signal integrity and EMI/EMC requirements.
Demonstrated innovative approaches to overcome adversity and push technological envelope.
Technical expertise in capabilities, selection and qualification of components used in flight spacecraft cable harness designs. Components include connectors, backshells, wire, contacts, splices, solder, overshields, terminal lugs and coax products.
Strong understanding and application of Geometric Dimensioning and Tolerancing (GD&T)
Experience using NX (Unigraphics) and Teamcenter CAD/PDM systems
Able to work well in an integrated, cross-site, collaborative team environment across engineering disciplines.
Self-Motivated and directed with keen attention to detail. ADDITIONAL REQUIREMENTS:
Must be available to work extended hours and weekends as needed. ITAR REQUIREMENTS:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here. SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000. Job Location Redmond, WA, United States
Electrical Harness Installation Engineering Contractor
PDS Tech is seeking an
Electrical Harness Installation Engineering Contractor
for an open position in Savannah, GA.
In your role, you will:
Position Purpose : Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services
Principal Duties and
Essential Functions: 1.
Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4.
Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area
Additional Functions : 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Education/Experience:
- Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1) In-depth knowledge of FAR 25 sub part H (EWIS) design requirements
Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151)
Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) POC: Clyde (813) 426-9917 or firstname.lastname@example.org All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.
Electrical Engineer (Wire Harness & PTC Creo/ Pro/E) Per Diem Incl
Our long-term client, whom are based in Portland are on the lookout for Electrical Engineers with Wire Harness experience for two Contract openings across the next 6 months on a
W2 basis. Role:
- 100% to be completed onsite in Portland.
- Design electrical systems and components
- Integrate control systems
- Be part of a team of engineers who design & document process whilst designing new harnesses.
- Will also work on improving current harness designs
- 5+ years of experience designing electrical systems (ideally in automotive design).
- Knowledge of Pro/Engineer, PTC Creo or WildFire
- Background working with CREO Schematics or similar.
- Knowledge of safety industry standards.
- Able to work on multiple projects at any one time.
Hourly rate is competitive. We offer our Contractors healthcare (up to 75%), 401k & per diem.
Would this be of interest to you? If so, please apply and follow it up with a call to Dylan at X4 Tech Staffing (718) 360 0568
Princ Harness Tech
Our mission is to ensure that our customers accomplish their mission whether it’s a technological breakthrough, a satellite launch, or protecting our nation. The company is the world’s leading supplier of solid rocket motors, a leading provider of launch vehicles, satellites and other space systems, and the nation’s largest manufacturer of ammunition. United in pride and shared goals, Orbital ATK employees come from diverse backgrounds and work together to deliver reliable, innovative and affordable solutions.
Work with the best and unleash your potential. If you are a dynamic, successful, driven professional, Orbital ATK is the company that will further your experience and career growth. We offer a highly competitive salary, comprehensive benefits including, medical, dental, 401k, tuition reimbursement, and much more.
Perform a variety of specific professional engineering tasks of an analysis, design, or test nature. Apply theoretical knowledge and engineering techniques to the solution of basic analytical engineering problems. Select and/or modify proven methods, mathematical formula, previous design and test information, handbook data or other available information related to the assignment.
Prepare and complete the design of components or portions of moderately complex functional systems working from overall operational, space, functional and similar design requirements. Design and document or select commercially available equipment, coordinate design results with other design groups, evaluate the merits of the design under the direction of more senior engineers and make the changes and compromises indicated.
• Assist with defining and capturing electrical connectivity across spacecraft • Generate wiring schematics, wire lists, installation drawings, and parts lists • Perform trade studies in regards to electrical impedance, EMI, and mass characteristics in order to optimize spacecraft harness design.
Preferred Qualifications: OrCAD experience Education and Experience HS & 6 years or equivalent combination of education & experience. Orbital ATK is applying entrepreneurial thinking and commercial practices to deliver reliable, innovative and affordable products and services to our customers and grow our core areas while harnessing new technologies that will take our products and your ideas into the future.
When encouraged to think beyond the ordinary, you’ll be amazed at what you can do! We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. EOE AA M/F/Vet/Disability Job Type:Full Time Desired Travel:less than 25% Years of Experience:5-8 Years Education:High School/GED Expertise:Engineering Group:Space
Electrical / Wire Harness Technician
A Kforce, Metro Detroit, Michigan (MI) automotive client is looking for an Electrical / Wire Harness Technician for a long-term, renewable contract position. Responsibilities Include:
Set up or convert test benches
The capability to diagnose electronic circuit boards
Solder fine pitch IC's
Maintain test equipment calibration schedule
Fabricate wire harnesses, reflash reprogram devices, run thermal/environmental test sequences, and circuit board assembly
Bachelor's degree or equivalent experience * 7-10 years of experience
Ability to maintain software/firmware compatibilities for various test/development bench components as well as ensure the development and test benches are updated as necessary Kforce is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Minimum Compensation:22.00Maximum Compensation:*26.00
Wire Harness Assembler
Minnesota Staffing is searching for dependable individuals looking for an excellent temp/hire opportunity with a great company.
This customer is a leading manufacturer of HVAC control panels in the country.
This position is 6:00am-2:30PM Monday/Friday with some overtime
Qualified candidates will be able to pass a pre-employment drug screen/background check and:
Follow schematics to build wire harnesses
Crimp terminals on wire
Document QC and resolution logs
Maintain a safe and efficient work area
There are only a few openings so please call to set up an interview
2724 Rice Street
Little Canada, MN 55113
Job Type: Full-time
Salary: $13.00 /hour
Find the right employees or your dream job with Minnesota Staffing Inc. We are a locally owned staffing and employment agency in St. Paul, Minnesota, with more than three decades of staffing experience.
Receive one-on-one personalized service when you trust your staffing and employment to Minnesota Staffing Inc. We work with small to medium businesses, distribution facilities, and warehouses. Our agency isn't age, gender, or income-specific with our staffing services.
At Minnesota Staffing our staffing services provide employees in several fields, from manufacturing and medical assembly to warehousing and office work. We have several job postings that are frequently updated, so keep checking back for more employment opportunities.
New Business Development/Account Executive--Cable And Harness Assembly
Independently research, target and call on new opportunities nationwide based upon Compulink’s core competency in military and commercial cable and harness assembly.
*Must be able to identify, penetrate and close new business opportunities. Candidate must be able to demonstrate the ability to work independently and to be self-motivated and self-directed.
*Primary focus is to target and drive new business development to defense contractors and large original equipment manufacturers nationwide.
*Set up, attend and promote CompuLink cable and harness assembly through industry specific trade shows.
*Strong group presentation skills are required. Must be able to present and differentiate the corporation in regard to quality, engineering, production and technical capabilities.
*Technical aptitude in connectors, cable, molding, or sales experience in electronic contract manufacturing is required. Knowledge of cable and harness assembly market and associated customer base is a plus.
*Candidate must possess the ability to travel nationwide on a regular basis.
*Compensation includes a base salary plus commission commensurate with experience.
Position is located in St Petersburg, FL
CompuLink offers a competitive base salary with unlimited earning potential, a comprehensive benefits package including medical, dental, 401k, and paid time off.
Today is the day you make the decision to grow more and earn more!
For immediate consideration, please submit your cover letter and resume to: email@example.com
Must be a US Citizen or a Permanent Green card holder to apply.
Wire/Cable Harness Assembler
Growing electronics company seeks individual with knowledge of wire/cable harness assembly. Job requirements include:
- Ability to set up and perform cable/wire harness assembly with knowledge of crimp theory.
- Certification in IPCA-620 preferred.
- Knowledge of crimp and hand tools.
- Ability to follow written and verbal instructions and read schematics and assembly drawings.
- Attention to detail a must.
In addition, experience in printed circuit board assembly including surface mount/through hole, touch up and soldering preferred.
Great opportunity to work in a well established, growing company!
Electrical Integration Engineer (Cable & Wire Harness Design Integration)
General Atomics Aeronautical Systems
Title: Electrical Integration Engineer (Cable & Wire Harness Design Integration)
California Full-Time/Part-Time: Full-Time Salary
Travel Percentage Required: 0% - 25% Clearance Required?:
General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable Unmanned Aircraft Systems and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.
DUTIES AND RESPONSIBILITIES:
Responsible for the electrical Integration of avionics module and payloads into unmanned air vehicle systems.
Designing of cables and wire harnesses that interconnect electronic equipment within the vehicle.
Responsible for generating system cable interconnect diagrams, point-to-point cable wiring schematics, cable lengths, routing details, and cable BOM.
Responsible for integration tests to verify functional operation. Responsible for generating test fixtures and test procedures for system level test.
Supports operation of engineering systems by evaluating and interpreting needs and problems and develops effective approaches to resolving those issues.
Troubleshoots, analyzes, and repairs systems in assigned area by utilizing standard engineering and scientific principles.
Provides documentation and makes technical presentations as required.
Directs the activities of designers, technicians and may direct the activities of less experienced professional staff.
Maintains the strict confidentiality of sensitive information.
Must have an understanding of engineering concepts, principles, and theory and experience demonstrating the application of those concepts while ensuring safety and regulatory compliance.
Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables.
Good communication, computer, documentation, presentation, and interpersonal skills, and ability to work both independently and as part of a team. *LI-ASI
Typically requires a bachelors degree, masters degree or PhD in Electrical Engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; two or more years of experience with a bachelors degree or 0-2 years of experience with a masters degree.
Working knowledge of Electrical Wiring Interconnection System standards, SAE-AS39029 (MIL-C-39029) – Electrical Connector Contacts, MIL-DTL-38999 – Circular Electrical Connectors, SAE-AS50881 – Wiring Aerospace Vehicle, NAVAIR 01-1A-505-1 – Aircraft Electric and Electronic Wiring Manual.
Working knowledge of electrical bonding; EMI/EMC shielding and filtering techniques.
Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks.
Able to work extended hours as required.
All applicants must be current US Citizens for this position and must be able to obtain a DoD security clearance. General Atomics and affiliated companies is committed to hiring and retaining a diverse workforce. We are an Equal Opportunity/Affirmative Action Employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, pregnancy, sex, sexual orientation, gender identity, gender expression, national origin, age, genetic information, protected veteran status, disability, or any other basis protected by local, state, or federal law.
Wire Harness Assembler
We are in need of some qualified candidates for immediate positions here at ACTIA. Individuals who are willing to work 10 hours a day/4 days a week
Possibly sitting or standing the entire time
Willing to be on time
Willing to come to work with a positive attitude
Willing to be trained in the area that we need them. We are able to pay $10/hour.
No experience in wire harness, we will train them, they just need to be able to show up and do their best.LANGUAGE SKILLS:Ability to read, write and comprehend simple instructions along with short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!