Horizontal Earth Boring Machine Operator Job Description Sample
Horizontal Boring Mill
Ohmstede Ltd. An EMCOR Company, is the largest manufacturer of shell and tube heat exchangers in the United States.
We offer our clients fully integrated turnaround, specialty maintenance, and heat exchanger fabrication via our state-of-the-art repair and fabrication facilities. Through the years, we've earned our customer's trust and a reputation for expert quality service, accountability, and for being a single point of responsibility on all the projects we manage ---- regardless of project size or tight deadlines.
Horizontal Boring Mill
Under the direction of the Machine Shop Supervisor, the mechanic takes rough forgings and plate and transforms them into machined tube sheets, flanges and covers. These completed units are used later in the process to produce bolting flanges and closures on shell and tube heat exchangers.
Essential Duties and Responsibilities:
1.Performs assigned tasks in a safe manner, avoiding all unsafe practices.
2.Sets up raw material and near finished product onto the chuck/machine.
3.Adjusts, sets up, and uses a variety of cutting tools.
4.Operates both table and floor type horizontal boring mill; lathes; drill presses; Bridgeport type milling machine.
5.Checks lubricating fluids periodically.
6.Performs preventative maintenance on the mill.
7.Inspects finished product.
8.Corrects defects as required.
9.Drills bolt holes as needed.
10. Operates overhead and jib cranes to move products in shop.
11. Performs internal quality control of machining procedures.
12. Sets up and performs jobs based on shop practices and procedures.
13. Removes shavings as needed.
14. Other duties as assigned.
- High School diploma or equivalent; or equivalent experience; knowledge of machining practices.
- Read and write English language; must comprehend and use geometry & algebra; able to read and interpret drawings, accurately read and interpret measuring devises. Experience in fab shop.
- Set of telescoping gauges up to 1-1/4", 10 or 12 foot tape, 12" adjustable wrench, 6" or 12" scale, center punches, 10, 12, or 14 oz. ball pein hammer, set of hex key wrenches, indicator, basic layout (dividers, trammel points, scribe), adequate tool box.
We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. EOE M/F/Disabled/Veteran
Boring Machine Operator B
Job Description: :
Plan, layout, set up, and operate a variety of boring machines to perform any standard boring machine operation on a Variety of production and less complex parts comprised of various types and forms of material.
Work from general instructions, operation sheets, standard practices, complicated drawings and specifications and other written or oral instructions to plan, layout, set up and perform straight and multiple step blind hole or through boring, compound angle boring, milling, facing, spot facing tapping, grinding and other standard boring machine operations to very close tolerances and fine finish.
Use and adapt any standard attachment and holding device.
Use standard methods and practices to hold and align work consistent with required squareness, parallelism, angularity and rigidity of work piece involving ordinary use of jacks, step blocks, size blocks, shims, bolts, clamps and similar devices.
Work from established reference lines and points to locate centers and lay out work accurately requiring the use of shop mathematics.
Maintain several closely interrelated dimensions involving occasional difficult internal measuring in confined areas.
Perform precision electro limit or end gage set-ups to locate work piece to tool by accurate table traverse.
Sharpen cutting tools as required.
Select feeds and speeds in accordance with type of material and finish requirements.
Plan methods and sequence of operations to develop programs anticipating foreseeable difficulties in holding, supporting and positioning work, and machining parts to meet quality standards.
Refer unusual conditions to Working Leader or Supervision.
Perform repair and salvage operations and diagnose and remedy machining difficulties.
Check work to assure quality standards are maintained.
Perform other related work of a comparable or lower skill level, including deburring, polishing, and part marking.
Perform operator checklist as required and comply with all EH&S procedures.
As required segregate waste material and follow good housekeeping practices.
Requires well-rounded knowledge of boring machine operations, tools, ordinary layout practices and cutting qualities of various metals. Work from complicated drawings, sketches or operation sheets.
Use shop mathematics and a variety of precision measuring instruments such as micrometers, vernier scales, dial indicator, height gage, calipers, etc. May occasionally require knowledge of advanced shop mathematics. Equivalent to 2 years high school plus 2 to 3 years trades training.
2 to 3 years.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Job Location(s): Stratford Connecticut
Security Clearance :
Business Unit :
Job Class :
Job Category :
Relocation Available :
Work Schedule :
STANDARD-Mon-Fri/8 hours a day
Req Type :
Additional Posting Locations :
Manual Horizontal Boring Mill Machinists
This high precision manufacturing company is seeking Manual Horizontal Boring Mill Machinists who can read blueprints. There is an opening on both first and second shifts.
Qualified candidates must have 4 years of Manual Mill set-up and programming experience, must have the ability to read and interpret blueprints, must have an eye for detail, and must be dependable.
For an immediate interview, please call 440-253-2983 or submit your resume to .
Horizontal Milling Machine Operator
This manufacturing company is offering an immediate, full-time position for a Horizontal Milling Machine Operator, who is a self-starter and has a strong mechanical aptitude and wells well independently, or as a member of a team. This is a second shift position, from 3:30 p.m. to 12 am, with the possibility of overtime.
Set-up and operate various CNC Lathes & Mills (both vertical and horizontal)
Set-up and operate grinders, manual lathes, mills, tapping and threading machines
G&M Code and program editing
Working with Fanuc and Mazatrol Controls
Read and interpret blueprints, layout sheets, and engineering drawings
Inspect machine products
Must know how to set-up and operate CNC Lathes & Mill Machines
Must know how to set-up and operate grinding, manual lathes and mills, tapping and threading machines
Must have previously worked with G&M Codes and performed program editing
Must know how to read and interpret blueprints, layout sheets, and engineering drawings.
Prior inspection of machine parts is necessary
Must be hard-working and reliable
Must have a solid work history with no attendance issues
Only candidates that can pass a background check and drug screen will be considered.
For an immediate interview, please call or submit your resume to .
Area Professionals is a division of Area Temps, a staffing industry leader in Northeastern Ohio since 1987. The Area Professionals team specializes in direct hire and contract recruiting at the professional, mid-management and executive levels.
Horizontal Bar Operator
Horizontal Bar Operator
Performs functions to machine parts to specified tolerances according to supplied drawing(s).
Works from blueprints, work orders and instructions:
Primary responsibility to operate the Giddings & Lewis Horizontal Boring Bar.
Set up and run bar to process weldments, plates, castings and similar work with a wide variety of dimensions.
Will cross-train on other similar machinery as work load requires.
Uses measurement devices such as micrometers to hold close tolerances.
Reads and interprets engineering drawings in order to hold given dimensions.
Uses basic shop math to calculate bolt circles, bevels, etc.
Troubleshoots own work.
Operates a fork truck and all overhead cranes.
Enters work order information through terminals in the shop.
Performs operator maintenance on equipment (TPM).
Follows safety guidelines for safe operation of all equipment.
Participates in Continuous Improvement Projects.
Reports to: Machining Supervisor
High school diploma or equivalency required.
Minimum 2 years related experience required.
Experience and ability to use micrometers to measure tolerances to .0005.
Experience in crane or heavy equipment manufacturing preferred.
Work in a factory setting; ability to stand 6-10 hours daily, ability to lift <50lbs frequently.="" personal="" protective="" equipment="" (ppe)="">50lbs>
Ability to communicate effectively within the organization on multiple levels.
Basic PC knowledge (ability to operate a keyboard and basic navigation between screens within an application).
Performs other duties as assigned. Participates in Continuous Improvement and 6S. Follows safety rules and keeps work area in clean and orderly condition.
Benefits include: Medical, dental, vision, life and disability insurances. 401(k).
EOE Employer M/F/V/D
Re Centering Manual Horizontal Turning Machinist
Brad Foote Gearing, a division of Broadwind Energy, is seeking a Re Centering Manual Horizontal Turning Machinist to join our team in Cicero, IL. This is a first shift position, with overtime as necessary. The Manual Turning Machinist is responsible for performing complex close tolerance operations in turning, facing, boring, chamfering recessing and form turning on a wide variety of production parts.
RESPONSIBILITIES AND ESSENTIAL FUNCTIONS:
Check the Route Sheet, blueprint and sketch for the operation and instructions
Set up and operate engine lathes, turret lathes or vertical boring mills
Measure rough material and divide stock to ensure 100% clean up
Turn the first side per turning sketch, blueprint and Route Sheet instructions
Check all dimensions, and if correct, remove the piece part from the machine
On second side, use soft jaws when applicable, skin cut soft jaws to ensure the face will run true within .001" T.I.R., true up the outside diameter to run true within .001" T.I.R.
When turning bevels, a proof spot should be added to the back and O.D. of the gear
Recenter and proofspot shafts and pinions after heat treat true to gear pitch diameters within 0.005"
Turn lengths per blueprint and route sheets
Face, center, drill and tap shafts and pinions
Safely operate Kent and Poreba engine lathes
Check the size, and if correct, remove the piece part from the machine
Stamp parts per SOP
Follow bar-coding procedures
High School diploma or equivalent education.
At least (3) years of experience with the functions of the machines and to operate them competently and efficiently preferred
Read and understand drawings of product, and understand all written work instructions
Shop mathematics, micrometers, and measuring instruments
Work from blueprints, sketches, route sheets and verbal orders
Provide necessary hand tools, and measuring instruments
Use company gauging
Brad Foote Gearing is proud to be an Equal Opportunity Employer. To learn more, please visit our website at www.bwen.com.
Mill Machine Operator I
JOB SUMMARY: Independently sets up and operates one primary assigned millwork machine(s) and one secondary millwork machine (e.g. HPJ horizontal drilling) to surface, cut, and shape wood-based raw materials and to fabricate parts for wood products such as cabinets, doors, walls, trim, tables, specialty fixtures, and etc. by performing the following duties:
Demonstrates Competency in the Following Areas:
1.Selects, installs, and adjusts saw blades, cutter heads, boring bits, and other devices in respective machines.
2.Reads and interprets drawings, cut lists, schematics to verify machine settings and materials match component specificatio
3.Starts machine and makes trial cut.
4.Verifies dimensions of parts for adherence to specifications.
5.Operates computer system and machine programming.
6.Inspects cut parts to make sure they meet quality standards and adherence to all necessary tolerances.
7.Separates and labels all parts in a neat and orderly fashion.
8.Accurately maintains and updates WC performance boards hourly.
9.Properly clocks in and out of work orders and posts correct number of parts completed per the work order.
10. Properly records materials used in inventory log.
11. Conducts basic troubleshooting of machine performance issues.
12. Performs minimal routine machine preventive maintenance as listed on maintenance form.
13. Immediately notifies supervision of any issues related to machine performance, material quality, and documentation
14. Observes all safety rules and works in a safe manner at all times.
15. Keeps machine area clean and organized daily.
1.Meets dress code/uniform standards; appearance is neat and clean
2.Completes any training requirements
3.Maintains dependable attendance
4.Wears ID badge while on company property or job sites
5.Works in a safe manner and observes all safety regulations
6.Performs other duties as assigned or requested
Education and Experience
High school diploma or GED; and 6 months to three years related experience.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.
Ability to measure and calculate dimensions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Ability to utilize Microsoft Windows for opening, navigating various Microsoft Office products and machine operating systems.
CNC Boring Mill Machinist
This person must be creative enough to handle complex set-ups and experienced enough to make smart changes in the machining process based on challenges faced and outcomes desired.
They must be familiar with a variety of CNC concepts, practices, and procedures with the ability to work with minimal supervision.
Key Job Elements: Perform complex set-ups and machining operations on a CNC Boring Mill with Fanuc controls and have the ability to read and understand G-code.
Edit CNC program to fine tune process for optimal performance In depth knowledge of geometric dimensioning and tolerance Follow instructions both verbal and written.
Verify conformance of finished work pieces to specification, using precision measuring instruments.
Produce quality parts in a timely manner.
Follow shop safety standards.
Work with Machinists, Project Managers and Engineers to solve problems and improve processes.
Proper use of cranes for overhead lifting.
Other Duties as assigned
Required High school diploma or GED required, plus 3 to 5 years related machine shop experience, or equivalent education.
Basic trigonometry, geometry, and machinist mathematical skills Detailed knowledge of CNC machining technique.
The ability to lift 60 lbs.
Proficient at reading and understanding measuring devices Proficient at reading and understanding blueprints and shop drawings
Preferred Programming ability and/or experience Familiarity with Fanuc controls Journeyman papers Associates degree in related field.
Boring Mach. Optr. / 6
Requisition ID: 004331
Sets up and operates either horizontal and/or vertical boring equipment with single or multiple heads.
Selects bits according to route sheet requirements and installs into equipment.
Adjusts hold downs and stops to machine bed to anchor part.
Checks quality specs on parts ever few pieces to insure adherence to standards.
Cycles machine and asides stock to skid to be moved to next operation.
Performs routine checks and maintenance on equipment.
Maintains work area in neat and orderly manner.
Detects faulty materials/process and notifies Lead Person/Supervisor.
Follows prescribed safety policies and procedures.
Performs miscellaneous jobs at Supervisor's direction.
Must be able to lift a wide range of wooden parts (light to heavy weight) and place into and out of machine
Must be able to read route sheets and utilize a number of measuring devices including tape measure, calipers, etc.
Must be able to maintain extreme concentration during short machine interval cycles.
Second Shift Hours are Mon. to Thurs. from 4:30 PM to 3:00 AM
Not ready to Apply?
CNC Machinist - Horizontal Milling (3Rd Shift)
Set up and operate multiple CNC machining centers per work instructions. Assist other CNC machinists in assigned area with day-to-day production. Set up and run new CNC programs and fixturing. Identify and recommend improvements to new and existing programs, documentation, fixturing and processes. Modify CNC programs if necessary to complete assigned tasks. Run production lots and maintain a safe, organized and clean work environment. Communicate with previous and following shifts to optimize Quality, Safety and Efficiency.
Sets up CNC machining centers.
Modifies tooling, programs and fixturing as needed.
Assists operators in assigned area.
Maintains the work area and equipment in a clean orderly condition and follows prescribed safety procedures.
Must be able to perform, but not limited to, the following tasks: milling, turning, drilling, tapping, de-burring, sawing and sanding.
Perform inspection of machined product (including documentation of results).
Completes and maintains paperwork for parts.
Confers with engineers, production personnel, programmers, or others to resolve issues.
Follows standard operating procedures (SOPs).
Perform all other duties, as assigned.
Related experience in precision job shop environment.
Minimum 5 years experience as CNC Machinist.
Minimum high school diploma.
Must have good command of the English language, both written and spoken.
Math skills: Shop Math, Trigonometry, Geometry.
Must be able to read and interpret drawings, follow routers, and use basic hand held measuring tools.
Able to get along well with others.
Able to frequently lift/push/pull objects that are 50 pounds, or heavier, repeatedly.
Walking/standing a minimum of 8 hours per day.
Able to sit, stand, bend, squat and walk about the facility.
Job Type: Full-time
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!