Hydraulic Strainer Operator Job Description Sample
Hydraulic Press Operator Level Iii
Upon completion of predefined training period, basic knowledge that allows operator to operate pre-programmed computer controlled open die or closed die hydraulic forging press and manipulators to bend, form, and straighten simple metal bars.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.
In performing functions, duties or tasks, employees are required to know and follow safe work practices, and to be aware of Company policies and procedures related to job safety, including safety rules and regulations. All functions, duties or tasks are to be carried out in an honest, ethical and professional manner, and to be performed in conformance with applicable Company policies and procedures. In the event of uncertainty or lack of knowledge of Company policies and procedures, employees are required to request clarification or explanations from superiors or authorized company representatives.
Basically trained in the operations involved with the operation of the forge presses and auxiliary systems, including ability to control the speed and tonnage without fault, as well as mechanical, hydraulic and electronic operations.
Constant supervision required.
Know the roles and relationships of each member of the press forge crew and where they are and their responsibilities during the operation of the press.
After a predefined training period is completed, has gained a basic knowledge of most commonly produced materials and their characteristics with regard to forging.
Basic ability to read and understand shop traveler, operating procedures, blueprints, and instructions regarding entering forge data into press and manipulator controls.
Knowledge of recording forge data for future use, complete production reports and SPC documentation.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience.
Ability to read and interpret documents such as operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Above average eye/hand coordination.Must be able to work well with other.Familiar various equipment used in the press control booth, including press controls, computer (file storage) and keyboard, joysticks, push buttons and foot pedals.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel objects, tools, or controls; and talk or hear. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl.The employee must occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly exposed to vibration. The employee occasionally works near moving mechanical parts.The noise level in the work environment is usually very loud.
Hydraulic Press Operator - Machine Operator - Mechanic
RHI Magnesita - The driving force of the refractory industry
Our team is currently seeking a skilled professional to support Production and Hydraulic Press Operator for our fast-paced refractory brick operation in York, PA. Our successful team members are self-starters who can work independently without direct supervision. This position runs a heavy tonnage hydraulic press and robotic system that supports the brick manufacturing process. The presses are the first step in creating our molded brick products.
$21.00/HR + $1.50 shift/$1.60 weekend differential
Following a probationary period, our team members can test into advanced pay levels where the average pay for a Production position is: $24.36 + differentials = approx. $55,000/yr
12 hour shifts 6pm to 6am including every other weekend; scheduled 14 of every 28 day cycle
Work safely in a heavy industrial facility when performing brick processing work. Heavy physical labor is required in this department and safety is our first priority.
Operate heavy tonnage hydraulic press including setting die/mold in place properly, follow press set up instructions carefully and accurately, ensure robotic systems are set up and in good working order, and perform scheduled preventative maintenance on the press or robotic systems as instructed.
Safely maintain a constant rate of production and alert other departments if there is a need for shut down, delay or maintenance on the press.
Follow charts, schedules, data sheets and instructions carefully and accurately for production orders, product specifications, maintenance, systems checks, quality guidelines and data entry into our electronic production management system.
Accurately record production completion times, piece counts, brick weights, and delay times for each shift.
A successful candidate will have experience in the following:
Our most successful candidates have mechanical aptitude and experience. Experience working on mechanical equipment like major auto repairs, motor repair or installation is ideal for this position.
Working in a heavy industrial environment where the assigned duties were in a fast-paced work environment that will be inside or outside in hot, cold and dirty working environments.
Experience working with heavy tonnage hydraulic presses is a plus.
Strong mathematical and mechanical aptitude including the ability to read and understand blueprints or similar schematics.
Strong verbal and written communication skills as we work in teams in this department.
Must be at least 18 years of age; attained a High School Diploma or GED; and strongly prefer training with mechanical systems or motors
from an accredited institution or on the job training from another employer.
Who is RHI Magnesita?
RHI Magnesita is the global leader in refractory products. Our largest North American manufacturing plant is based in York, PA where our operation includes mining, aggregate crushing and screening, and various kiln processes to manufacture brick refractory products. Our manufacturing processes include heavy tonnage hydraulic presses, kilns, and robotic assisted palletizing/packaging automation.
What can RHI Magnesita do for you?
Our York, PA facility offers team members a variety of work for a life-time of fulfilling career opportunities. A skilled professional has high earning potential and the chance to advance through our 15+ departments. We encourage team members to take on-the-job training, test into advanced levels of position and pay, and bid on positions in different departments throughout their career. Our benefits package provides health and financial stability for our team members and their families. Learn more about us at: https://www.rhimagnesita.com/about/
Paid Time Off, Paid Holidays, company discounts, 401K with full company match up to 6%, comprehensive medical/ dental/ vision coverage, fitness membership reimbursement, company paid Life Insurance and Long/Short Term Disability.
The aforementioned is a summary of responsibilities and qualifications. A full job description will be available for anyone who interviews for a position.
Hydraulic Mechanic - 1St Shift
Job Description: Job ID: PAL001979
Pall Corporation is a global leader in high-tech filtration, separation, and purification, serving the diverse needs of customers across the broad spectrum of life sciences and industry.
Pall Life Sciences provides cutting-edge products and services to meet the demanding needs of customers discovering, developing and producing biotech drugs, vaccines, cell therapies and classic pharmaceuticals. Pall offers advanced medical technologies, which are often a patient's last line of defense from dangerous pathogens. Pall's food and beverage products provide critical protection from contaminants during various manufacturing steps.
Pall Industrial serves a diverse range of customers in the microelectronics, aerospace, fuels, petrochemical, chemical, automotive, and power generation industries. Pall is a key supplier to the innovative and demanding semiconductor and consumer electronics industries, and provides filtration products used in critical applications on commercial and military aerospace vehicles. Pall products are key to the reliability of industrial equipment. Pall's engineered solutions help municipal and industrial customers address mounting water quality, scarcity and demand issues, and help energy companies maximize production and develop commercially successful next generation fuels.
Headquartered in Port Washington, New York, Pall has offices and plants throughout the world.
To learn more about Pall, please visit www.pall.com/green.
First Shift Hours: 6:30 AM - 3:00 PM
Performs assembly and testing on complicated valves and assemblies.
Performs complicated maintenance repairs.
Maintains high productivity while producing quality parts
Follows written technical instructions and drawings.
Assembles job per drawing and work instructions and test hydraulic filtration assemblies per Acceptance Test Procedure (ATP).
Performs Total Productive Maintenance (TPM) on hydraulic test stands and related test equipment
Troubleshoots technical problems during assembly and test.
Troubleshoots malfunctions of hardware
Evaluates and repairs customer returns, as needed
This job description in no way states or implies that these are the only duties to be performed. This position is required to follow any other instructions and to perform any other duties requested by the supervisor.
Identify cost savings.
Maintain a clean, organized and safe work area.
Work safely by following all safety procedures.
Trains coworkers and supports continuous cross training improvements
Participate in Kaizen and other continuous improvement programs while supporting the Pall Operating System ( POS )
Ability to work scheduled overtime as needed.
EDUCATION/PRIOR EXPERIENCE REQUIREMENTS
Must have High School or GED; Technical Trade School Graduate preferred
Minimum of Two (2) years of experience working in a related (mechanical) field/position
Good mechanical skills and technical abilities.
Must have knowledge and prior experience using technical hand tools and gages
Familiarity with Hydraulic/pneumatic principles and related hardware
Must be able to read and comprehend drawings and written work instructions
US Citizenship or Resident Alien status required to support government programs and projects
Restrictions are limited only by the individual's inability to perform essential job duties and where an unsafe condition would result for the individual or surrounding employees.
Required Lifting Weight: 30 lbs. Lifting Frequency: Daily
Must be able to work with solvents, oils and other chemicals required.
Required to stand for long periods, twist, bend.
Danaher Corporation Overview
Danaher is a global science & technology innovator committed to helping our customers solve complex challenges and improve quality of life worldwide. Our world class brands are leaders in some of the most demanding and attractive industries, including life sciences, medical diagnostics, dental, environmental and applied solutions. Our globally diverse team of 62,000 associates is united by a common culture and operating system, the Danaher Business System, which serves as our competitive advantage. We generated $16.9B in revenue last year. We are ranked #133 on the Fortune 500 and our stock has outperformed the S&P 500 by more than 1,300% over 20 years.
At Danaher, you can build a career in a way no other company can duplicate. Our brands allow us to offer dynamic careers across multiple industries. We're innovative, fast-paced, results-oriented, and we win. We need talented people to keep winning. Here you'll learn how DBS is used to shape strategy, focus execution, align our people, and create value for customers and shareholders. Come join our winning team.
Hydraulic Product Validation & Verification Engineer
Hydraulic Product Validation & Verification Engineer
Apply now "
Date: Mar 9, 2018
Location: Dubuque, IA, US, 52001
Company: John Deere
There are 7 billion people on this planet. And by 2050, there will be 2 billion more... many moving into urban centers at an unprecedented rate. Making sure there is enough food, fiber and infrastructure for our rapidly growing world is what we're all about at John Deere. And it's why we're investing in our people and our technology like never before in our 175-year history. Here the world's brightest minds are tackling the world's biggest challenges. If you believe one person can make the world a better place, we'll put you to work. RIGHT NOW.
Primary Location: United States (US) - Iowa (US-IA) - Dubuque
Function: Product Engineering
Title: Hydraulic Product Validation & Verification Engineer - 38819
As an entry-level Hydraulics Product Verification and Validation (PV&V) Engineer for the John Deere Construction & Forestry division, located in Dubuque, IA you will support the development of hydraulic and hydrostatic systems for Construction & Forestry equipment through all phases of a product delivery process. In addition you will:
Plan and execute component, system and machine level tests to verify designs meet performance and durability requirements
Evaluate supplier test results to verify components meet requirements
Analyze data and report conclusions to appropriate stakeholders
Participate in weekly test coordination and product development meetings
Document all verification activities
Visa sponsorship is NOT available for this position.
What Skills You Need
Engineering experience obtained from projects, internships or practical work experience
Demonstrated problem solving skills (reviewing evidence, mathematical concepts, statistical analysis)
Demonstrated ability to balance multiple tasks
Demonstrated effective verbal and written communication skills
Experience in roles that required a demonstrated basic knowledge of statistical analysis
Ability and willingness to travel up to 25% (both domestic and internationally)
Ability and willingness and ability to work flexible hours, when needed
What Makes You Stand Out
Experience in roles that required a basic understanding of hydraulic systems and components
Demonstrated ability to understand hydraulic schematics
Experience in roles that required a demonstrated ability to understand electrical diagrams
Experience with data collection and analysis
Experience operating construction & forestry equipment
Experience with machine simulation
Education (or equivalent work experience)
- Bachelor's degree in Mechanical, Electrical or Agricultural, Chemical, Biological, Environmental Engineering
What You'll Get
At John Deere, you are empowered to create a career that will take you to where you want to go. Here, you'll enjoy the freedom to explore new projects, the support to think outside the box and the advanced tools and technology that foster innovation and achievement. We offer comprehensive relocation and reward packages to help you get started on your new career path. Click here to find out more about our Total Rewards Package.
The information contained herein is not intended to be an exhaustive list of all responsibilities and qualifications required of individuals performing the job. The qualifications detailed in this job description are not considered the minimum requirements necessary to perform the job, but rather as guidelines.
John Deere is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, sexual orientation, gender identity or expression, status as a protected veteran, or status as a qualified individual with disability.
Nearest Major Market: Dubuque
Job Segment: Hydraulics, Construction, Agricultural, Developer, Engineer, Engineering, Agriculture, Technology
Apply now "
Find similar jobs:
Mechanical Design Engineer - Hydraulic Pumps, Valves And Actuators
Mechanical Design Engineer – Hydraulic Pumps, Valves and Actuators
CDG, a Boeing Company is a world-class strategic partner for engineering-driven organizations that develop, support, operate and maintain complex equipment. CDG serves a broad range of industry sectors, including commercial and VIP aviation, aerospace and defense, manufacturing and other industries.
CDG is starting up a new, small team to focus on the reverse engineering and design of aircraft components. CDG is looking for an experienced specialist in the area of hydraulic and fluid system components, including valves, pumps and actuators, to lead these projects. This position is located in our Long Beach, CA office. No relocation provided.
Proven experience designing hydraulic components and systems, including valves, pumps and actuators a must
Bachelor's Degree and minimum 12 years relevant experience
Knowledge of fluid system mechanics, including theory and equations, a must
Experience with reverse engineering strongly desired
Experience with PMA or other aircraft component certification strongly desired
Product engineering experience encompassing components of the entire life cycle – concept to delivery – strongly desired
Thermal analysis, strength/structural analysis and physical testing experience a plus
Certification through National Fluid Power Association (NFPA) or equivalent a plus
Experience working with international teams a plus
Engineering within Boeing Commercial Aircraft Group a plus
Lead the reverse engineering and design of hydraulic and fluid system aircraft components
Approve designs for accuracy, functionality and manufacturability
Present project or team status to other CDG/Boeing teams, functions, management, and organizations, as well as customers, suppliers and other stakeholders to keep them informed of progress, help needed, and changes to plan
SKILLS AND ATTRIBUTES:
- Demonstrated understanding of general mechanical design principles, including design for manufacturing (DFM) and geometric dimensioning and tolerancing (GD&T)
- Proficiency in 3D modeling and 2D drafting (CATIA V5 experience a plus)
- General understanding of aerospace material properties, including metals and plastics. Knowledge of composite materials is a plus.
CDG is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.
We maintain a drug-free workplace and perform pre-employment substance abuse testing.
US Person: Yes. Due to legal requirements associated with our work statements, you must be able to provide documentation indicating that you are a US Person.
We offer a competitive salary, great benefits, and a pleasant working environment.
Maintenance Hydraulic Specialist (2275)
Founded in 1915, we started with a single recycling location and have grown into a global enterprise, and one of the largest metal recyclers and steel manufacturers in the United States. Our vertical integration model was the first of its kind and revolutionized the way the steel industry operates today.
We are also a Fortune 1000, global company that is committed to delivering industry-leading customer service, providing a safe and healthy environment where our employees can succeed, creating value for our investors and improving our communities.
We are sensitive to the impact our industry has on the environment, which is why we are committed to a process that minimizes our carbon footprint and preserves our natural resources for future generations. Our recycling facilities collect metals from the community and convert them into steel that supports our infrastructure.
Return to List | Apply Now
Maintenance Hydraulic Specialist (2275)
Location:Birmingham, AL (0212) Relocation Assistance:No
The Hydraulic Technician provides technical support to all areas of the plant to ensure safe and continuous operation of the plants hydraulic equipment. The Hydraulic Technician maintains all the equipment in the plant by showing proficiency in installing, troubleshooting, and repairing the equipment. The hydraulic Technician maintains a professional relationship with all of the operational departments.
Essential Functions and Responsibilities
- Inspect plant hydraulic equipment for defects, such as mis
Field Service Technician I – Hydraulic Lift – San Antonio, TX
Provide testing, repairs, and routine servicing on equipment in the shop and the field. In addition, help generate business to increase revenues through sales of Weatherford products and services.
DUTIES & RESPONSIBILITIES:
Install Hydraulic Lift Equipment in Production/Completion Wells.
Must be able to maintain shop operations and calibrate equipment.
Have the ability to identify, evaluate, install, and repair related equipment in shop or field
Personnel must be able to complete all documentation, accurately as required
Must work with minimal supervision and be self-motivated
Must follow HSE requirements and live up to requirements
Work well with experienced technicians for on the job training and follow direction
Must have ability to identify and inspect equipment upon arrival to work site.
Must be able to grasp basic concepts
Must be able to work with rig crews as well as customers at the field level and in professional manner
Maintain clean and safe work environment and adhere to all safety regulations
Work assignments carried out to the highest quality level
Perform various other duties assigned by supervisor within the physical constraints of the job.
Extensive domestic travel required to meet internal and external customers' needs.
Ability to work flexible work schedule, including long and/or irregular hours.
Available 24/7 to meet demands of customers for installation as well as support if needed
Basic Computer Skills
High School Diploma or Equivalent
Valid driver's license and good driving record
The physical ability to immediately respond to emergency situations.
1-3 years experiennce installing and repairing oil field equipment.
Customer Service/Communication Skills
1-3 years' experience installing and repairing gas lift equipment
POSITION SPECIFIC DETAILS
Weatherford offers competitive compensation and benefits upon hire; including paid vacation to start, matching 401K program, comprehensive benefits program, and employee stock purchase program (ESPP) and opportunities for on-going training and career development.
Weatherford is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.
Hydraulic & Plumbing Development Mechanic - 1St Shift
Job Description: :
PERFORMS SUCH TYPICAL DISTINGUISHING DUTIES AS:
Develops and performs experimentally, the layout, parts fabrication, assembly, installation and checkout operations required for the building of hydraulic and plumbing systems on prototype aircraft and other prototype products, for the purpose of creating or proving engineering design, to the point where sufficient information is gathered and the work may be delegated to others such as production bench, fabrication, assembly and/or installation personnel, or to subcontractors.
Incorporates major revisions in prototype hydraulic and plumbing systems on the level of difficulty of the work described herein, by developing and performing experimentally, the required layout, fabrication, assembly, installation and checkout operations.
Works closely with authorized liaison personnel, and suggests, verbally or by sketches, design changes; for engineering approval, when part, system or assembly cannot be made or installed as designed, or does not seem to meet functional demands, or where such changes will simplify fabrication, assembly, installation or maintenance of systems.
Determines, or physically projects or lays out from loft, the coordination points required for building of tooling or parts, so as to insure subsequent mating of fabricated or installed parts and assemblies, and/or to determine location, or to prevent interference with other systems, structures, or installations.
Performs all necessary operations to prove the functioning of prototype ship hydraulic and plumbing systems and components.
Works from general configuration and preliminary engineering design data, oral or written.
PERFORMS SUCH RELATED DUTIES AS:
Improvises shop aids or works without tooling in fabricating, assembling, installing, operating and checking out hydraulic and plumbing systems and components. Develops information required to build necessary tooling.
Lays out, fabricates and assembles supporting structural parts as a required, incidental to the hydraulic and plumbing development work described herein.
Makes and proves master tube templates, working from own developed ship mockup.
Instructs and works with production personnel as required in the initial production run, including fabrication, assembly, installation and checkout of the developed system.
Performs satisfactorily any function of the Tube Finisher, Tube Assembler, Tube Bender - General, Hydraulic Assembler, Hydraulic and Plumbing Installer, and Hydraulic and Plumbing Checkout Mechanic as required.
Experience with Tube Finisher, Tube Assembler and Tube Bender.
Experience with Hydraulic Assembler, Hydraulic and Plumbing Installer, and Hydraulic and Plumbing Checkout Mechanic as required
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Join us at Lockheed Martin, where we're engineering a better tomorrow.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
Job Location(s): Palmdale California
Security Clearance :
Business Unit :
ESS0343 AERONAUTICS COMPANY
Job Class :
Job Category :
Relocation Available :
Work Schedule :
FLEX9x80A-Friday off in 2nd week w/flex hrs/day
Req Type :
Additional Posting Locations :
Hydraulic Hose Fabricator (Industrial Hose Technician)
Motion Industries' Service Technicians provide the highest levels of mechanical service and product repair to meet the needs of our customers. Whether repairing hydraulic hose, pumps and cylinders or mechanical gear boxes, we cater to the needs of our customers to keep their industry in motion. Motion offers an excellent benefits package that includes options for healthcare coverage 401(k), tuition reimbursement, vacation, sick, and holiday pay.
Measure, cut, assemble, crimp, etc., industrial hydraulic hose
Test and check hose assemblies per shop procedures
Read and understand work orders
Clean and package hose assemblies for shipping
Keep clean work area
Some warehouse duties
Ability to read and understand work orders
Ability to read tape measure and caliper
Ability to handle material up to 100 pounds
Hydraulic power unit fabrication skills helpful but not required
GPC believes the fair and equitable treatment of employees, customers, suppliers and other persons is critical to fulfilling its vision and goals. GPC conducts its business without regard to sex, race, creed, color, religion, marital status, national origin, age, pregnancy, sexual orientation, gender identity, genetic information, disability, military status, status as a veteran, or any other protected characteristic. GPC's policy is to recruit, hire, train, promote, assign, transfer and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons.
Project Engineer, Transmission Hydraulic Actuators
BorgWarner is a global product leader in powertrain solutions. We focus on developing leading powertrain technologies that improve fuel economy, emissions and performance. Our facilities are located across the globe to provide local support for our diverse customer base.
We operate in two groups: The Engine Group develops air management strategies and products to optimize engines for fuel efficiency, reduced emissions and enhanced performance. BorgWarner's expertise includes engine timing systems, boosting systems, ignition systems, air and noise management, cooling and controls. The Drivetrain Group harnesses a legacy of more than 100 years as an industry innovator in transmission and all-wheel drive technology. The group leverages this understanding of powertrain clutching technology to develop interactive control systems and strategies for all types of torque management. BorgWarner's Transmission Systems business Unit is currently looking for dynamic, results driven individual to join as a Project Engineer, Transmission Hydraulic Actuators at our Auburn Hills Powertrain Technical Center.
Leads design and development of Transmission Electro-Hydraulic Actuation Systems in internal or customer development projects. Products include solenoid actuators, hydraulic control modules and stop-start accumulator systems for Stepped Automatic, Dual Clutch, Continuously Variable and Hybrid Transmissions. Responsible for development activities including Simulation, CAE, Optimization, Laboratory Performance and Validation. Position utilizes engineering disciplines including Electro-Magnetics, Fluid Dynamics, Control Theory and Mechanics of Materials.
Leads product design and development
Key engineering contact for communication with our customers, the global vehicle and transmission manufactures
Works directly with manufacturing plant to ensure product meets manufacturing objectives
Presents regular updates to leadership and customer on project status
Organizes prototype hardware build and validation
Works with supply base to develop prints and processes
Leads cross functional problem solving activities
BSME or BSEE required
Experience involving electro-magnetic systems and/or electro-hydraulic systems preferred
Experience in component and system design
Knowledge of magnetic solenoids and powertrain hydraulic controls preferred
Experience with Maxwell, AMESim, and ANSYS Mechanical preferred
Proficient in Geometric Dimensioning and Tolerance (GDT)
Excellent communication and organizational skills
Proficient with MS Word, Excel, and PowerPoint
Preferred experience in statistical data analysis software, e.g. Minitab
Functional / Technical Skills
Drive for Results
This position will adhere to Global Star Safety Program, including safety rules, practices and training as outlined in the BorgWarner PTC Safety Policy Manual, which includes the use of equipment, protective devices, or clothing that the employer requires. This individual will work in manners that stress the importance of preventing accidents and illnesses. He/she must take every precaution reasonable in the given circumstance for the protection of themselves and coworkers. In addition, he/she is responsible for reporting all injuries and/or possible dangerous situations, incidents, or occurrences to the immediate supervisor.
EQUAL OPPORTUNITY EMPLOYER STATEMENT
It is our policy to recruit, hire, train, and promote individuals who are qualified for any position by reason of education, training, experience, and personal characteristics, without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, veteran, marital status, height, weight, or any other legally protected status.
Internal Use Only: Salary
Please access the linked document by clicking here, select the geographical area where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with the terms.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!