Inspector And Hand Packager Job Description Sample
Aerospace Quality Inspector
1st or 3rd Shift Quality Inspector
Test and inspect products at various stages of the production process, from in-process to final inspection. Testing will include CMM, dimensional and mechanical. Generate internal non-confirming reports. Enter and analyze test and SPC data. If 3rd shift, initial training on 1st shift, before moving to assigned position on 3rd shift. Must be able to work overtime and some Saturdays.
Provides inspection activity to maximize product reliability and minimize cost throughout the production part cycle.
- Perform various in-process and final inspection tasks.
- Perform CMM (coordinate measuring machine) inspection.
- Issue internal non conformance reports
- Data/SPC entry analysis
- Blue print, drawing reading
- Basic GD&T
- Perform dimensional and mechanical testing
Education and/or Experience:
- Basic math capabilities.
- Must be fluent in English for communication, reading and writing
- Blueprint reading
- Use of standard hand held measuring equipment
- Basic computer skills with Work,Excel, Access
- High School diploma or equivalent GED.
Ability to light up to 50 lbs and have good hand dexterity. Position requires significant walking, bending and standing.
- This is a full-time, long term, temp to hire position
- 1st and 3rd shift positions available.
- Salary based on experience.
- Must be able to work overtime and some Saturdays.
Quality Control Inspector
The Quality Control Inspector III performs quality control inspections, checks, and tests during the manufacture of products. Inspects materials, parts and products at different stages of production. Records observations and may make recommendations for improving processes.
(This description is not all inclusive, other duties may be assigned):
Discuss inspection results with those responsible for products, and recommend necessary corrective and preventative actions.
Inspect, test, or measure materials, products, installations, and work for conformance to specifications.
Notify supervisors and other personnel of production problems, and assist in identifying and correcting these problems.
Detects and reports defective materials or questionable conditions to management or designee
Performs inspection of machined products and records results
Completes and maintains documentation for parts
Ensures conformance to specifications through Inspecting, testing, or measuring materials, products, installations, and work
Maintains the work area and equipment in a clean, orderly condition and follows required safety procedures.
Discard or reject products, materials, and equipment not meeting specifications.
Mark items with details such as grade and acceptance or rejection status.
Record inspection or test data, such as weights, temperatures, grades, or moisture content, and quantities inspected or graded.
Create and/or validate Bill of Materials and routing structure for existing and new product development.
Customer relations related to quality control inspection.
Assist in quotation estimates for existing and new product development.
Develop training and technical procedures following established manufacturing guidelines.
Adhere to all ISO processes and procedures.
Adhere to all workplace safety laws, regulations, standards, and practices.
Familiar with standard concepts, practices, and procedures within a particular field.
Relies on experience and judgment to plan and accomplish goals.
Works under limited supervision.
A certain degree of creativity and latitude is required.
Keen attention to detail
Excellent written and oral communication skills
Excellent problem solving, analyzing, and resolving skills
Ability to communicate at all levels of construction
Experience working in a team-oriented, collaborative environment
Reasonable accommodations will be considered which would allow the employee to perform the essential functions of the job.
Control Precision- The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
Arm-Hand Steadiness- The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
Finger Dexterity- The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
Reaction Time- The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
Near Vision- The ability to see details at close range (within a few feet of the observer).
Frequent sitting, walking and standing.
Occasional stooping, kneeling, balancing.
Frequent use of eye/hand co-ordination.
Use of all safety equipment as required in performance of daily job responsibilities
Required Education and Experience:
8 (eight) to 10 (ten) years of experience with an Associate’s Degree or 5 (five) to 7 (seven) years of experience with a Bachelor’s Degree
Excellent PC skills with proficiency in Microsoft programs
Ability to read, interpret and review construction drawings and documents
Next Generation Precision Machining LLC (NGPM) is the cutting edge manufacturing division of IPSUMM Inc. In addition to its own captive machine shop, NGPM uses a consortium of independent shops in the region to formulate the best solutions for its customer base. We understand our customers' manufacturing needs pose unique challenges and demand dynamic solutions. From prototype design to lean cost-effective mass production, NGPM has the resources and manufacturing capabilities to meet the needs of our customers on any scale. At NGPM, clear and timely communication, both internally and externally, is one of our top priorities to ensure the best project execution.
QC Inspector - Electronics Pcba And Cable Assembly
· Ensures in‐process and finished products meet customer/company standards.
· Work from documentation or samples to perform inspection operations which include component installation, hand soldering and electro-mechanical assemblies.
· Use various hand and machine tools to complete inspection work.
· Inspect assembly work to ensure that completed assemblies meet workmanship standards.
· Skills- Requires quality control inspection experience with vocational instruction in electro‐mechanical assembly, basic reading, writing, addition and subtraction skills. The ability to work from established drawings and have experience in soldering, wire‐wrapping and cable harnessing. Able to use hand tools. Basic English communication and computer skills preferred.
· Knowledge- Workmanship standards preferred.
· Experience- Quality control inspection, conformal coating experience preferred.
· Education- High school diploma or equivalent education, training and work experience in electronics training courses preferred.
· Physical Demands – Requires a fairly consistent exchange of sitting and standing with some bending, squatting and reaching at or below shoulder level. Lifting and being able to carry approximately 20lbs.
· Work Environment – Indoor manufacturing area that’s light industrial with minimal heavy equipment, some noise and a few chemicals.
Our abilities encompass a wide variety of skills, beginning with your prototypes and culminating in the ongoing manufacturing of a complete product or assembly. Turn-key solutions are tailored around each customer's specific requirements.
Conveniently located in San Jose, California with close proximity to San Jose airport and all major carriers; Quality Circuit Assembly is a publicly traded business. Its primary aim is to provide contract manufacturing solutions to market leading companies within the aeronautics, industrial, scientific, instrumentation, military, medical and green economy industries.
Quality Inspector - Assembler
The Quality Inspector/Assembler performs quality inspections per engineering specifications. Assemble products using engineering drawings, work instructions, and hand tools. Time is roughly split evenly between inspection and assembly.
Quality Manager/Plant Manager
ESSENTIAL JOB FUNCTIONS
· Inspect and test products and perform quality related activities.
· Generate quality documents for shipping per customer requirements.
· Work with engineering to make sure all quality specifications are properly flowed down.
· Perform projects as assigned by Quality Manager and Plant Manager.
· Demonstrated ability to assemble product using engineering drawings, work instructions and hand tools.
SKILLS and ABILITIES
· Knowledge of Microsoft Word and Excel
· Good communication and oral skills
· Ability read and understand engineering drawings and specifications.
· Knowledge of ISO 9001
· Ability to use basic measuring tools such as micrometers, calipers, height gauges, optical comparator, etc.
· Ability to use hand tools and fixtures to assemble products and verify proper assembly using proprietary test equipment.
EDUCATION and EXPERIENCE
· High School Diploma/GED
· Five (5) years in quality inspection with additional assembly experience
Myat, Inc. is a leading manufacturer of radio and TV broadcasting equipment with a history of excellence since 1951. Myat also manufactures microwave equipment for industrial heating applications, radar applications, and particle accelerators. We do all design and assembly in our Mahwah, New Jersey headquarters. We support assembly with in-house machining and welding shop capability.
Company size: 30 - 50 Employees
Cup Inspector - 2Nd Shift
Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our associates make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion.
Description: Inspects cups for conformity to customer and Association of American Railroads specifications using measuring instruments to determine OD and ID dimensions. Cleans, deburrs, polishes, or grinds items of metal using a hand grinder, wire brush or buffing cloth. Assist in the assembly of cups and cones prior to the lateral operation; if required.
Other tasks as assigned by the supervisor or company management. Overall Purpose: Inspects products for conformity to customer specifications, using measuring and hand operated instruments.
Repairs any minor defects found on the product that would prevent the product from meeting the requirements of conformity. Essential Functions: 1. Examines product for defects such as cracks, water etchings, spalls or nicks. 2.
Does some types of minor repair. 3. Verifies dimensions of product, using Dial indicators. 4. Rejects or re-grades products not meeting specifications. 5.
Inputs information covering materials scrapped or salvaged. Physical Demands & Frequency: Requires frequent medium lifting, standing, reaching, handling, fingering and near acuity.
A. Position: Standing. B. Weights & Force: 20-40 pounds 300 times a day. C. Use of Controls:
Use of various gauges and hand grinder. D. Vision must be normal (20/20). Correctional lenses are acceptable General Educational Development: Information may be presented in written, oral or diagrammatic form and requires a common sense understanding to be applied in order to carry out the instructions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status.
Varex Imaging QA Inspector will perform inspection duties to ensure that incoming, in-process and outgoing product fulfills customer and internal specifications and quality requirements at our Salt Lake City, Utah facility.
Perform basic inspection background. Basic hand tools, Navigate and promote a supportive disposition through this role with the objective of, once again, supporting internal customers. Be able to receive parts into our inspection area coming in from the supply chain. Be able to read illustrations and determine what tools are needed to inspect product. Indicate if the product is accepted to deploy to the next step of the process. If the product is not acceptable to deploy, the candidate will initiate a rejection report.
Job RequirementsMinimum Required Skills and
• Associate's Degree or equivalent
• 3 - 5 years of related experience
• Ability to periodically lift up to 40 lbs.
• Ability to read and understand drawings and procedures.
• Use of basic hand tools (Micrometer, surface plate, etc.)
• CMM experience (Zeiss/Calypso)
Become part of our team
You’re just one click away from the most impactful work you’ll ever do. Apply now and join our mission to save lives. Someone, somewhere, will be glad you did.
All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability.
Join us as we build a new future company. Find your new future with us.
Recognized as a leader in our Industry, Varex Imaging prides itself on recognizing and developing top talent to take its people and company to the next level. We understand that the value of our contributions reaches far beyond our doors. Knowing that we have created an inspired and compassionate environment where all contributions and ideas are considered.
Varex offers you an opportunity to come on board and make a difference. We offer a competitive salary and a comprehensive relocation package.
We know that when you are working with great people, innovating freely and with conviction, you can make a tremendous impact and help deliver the most advanced technology and solutions in the industry. To learn more about our jobs and culture, join the Varex Talent Community of your interest Click Here.
CMM Technician/Layout Inspector
Job Location(s):New Berlin, WI
Employment TypeFull Time
Hours per Week:40
Work Hours (i.e. shift):7::30AM -4:00 PM
Starting Salary Range:$18 - $25/Hr. depending on qualifications
Required Education:High School Diploma or Equivalent, 1-2 years of Technical Schooling a Plus
Experience:1 to 3 years preferred. Will train qualified candidates (see qualifications required below)
Read and interpret customer provided part prints taking geometric dimensioning and tolerances into consideration to plan a proper layout inspection using Touch Probe and Video Coordinate Measuring Machines. Create automated and or manual measuring programs as applicable on the contact and non-contact CMM’s. Create data reports of measurement results for customer/Engineering analysis. Measurements gathered may be for Full 1st Article (ISIR), PPAP’s, Highlighted Dimensions, or Process Capability Study inspections. Also perform scanning and digitizing of parts and profile analysis to CAD and other file types. Interact with customer contacts (Engineers) as required to establish proper plan for measuring parts to customer requirements or review and interpretation of results. The ideal candidate will be experienced in operating and programming DCC and Manual CMM'S
Because we are a specialty inspection service, work is varied, interesting and not routine as found in many manufacturing areas.
Job Duties (include but not limited to):
§ Program and operate the measuring machine(s) (CMM) to measure the surface area of three-dimensional objects for the inspection phase in the manufacturing process. In this position the CMM programmer will interpret blueprints and programs and ensure the CMM takes accurate measurements.
§ Writes part inspection programs and develops part fixturing methods for CMM and other inspection equipment such as vision inspection equipment.
§ Reads and interprets part prints/drawings and job orders for all product specifications, i.e., dimensions, tolerances, inspection, and other specific instructions.
§ Interprets and understands geometric dimensioning and tolerance (GD&T) callouts from customer drawings, and translates it into inspection programs, to ensure manufactured products meet customer dimensional specifications.
§ Measures dimensions of parts as specified to ensure conformance to specifications, using CMM & other automated inspection equipment as well as precision measuring instruments, templates, and fixtures.
§ Assists with statistical studies including gage R&Rs, process capability studies.
§ Participates in continuous improvement activities to improve process and product quality and efficiency including CMM inspection methods.
§ Other duties as assigned.
§ 2-5 Years minimum Experience Running and programming Coordinate Measuring Machines
§ 2 -5 Years Minimum Part Layout Experience
§ Experience and educated in Reading and Interpreting Part Drawings (Blue Prints)
§ Thoroughly experienced and educated in Geometric Dimensioning and Tolerancing
§ Must be capable of working effectively individually or in a team environment.
§ 2 year technical school degree or equivalent level of education and/or work experience in a Quality or manufacturing discipline where CMM’s were used.
§ Must be able to follow verbal and written instruction.
§ Good Math Skills
§ Must possess initiative and self motivation.
§ Ability to obtain and maintain accurate records & certifications.
§ Strong computer skills
§ Ability to work with data bases and know how to properly store and retrieve data
§ Good Mechanical Aptitude
§ Good Troubleshooting skills
§ Must have good communication skills and a professional appearance due to interface with customers.
§ Health Insurance
§ Dental Insurance
§ 401K Plan
§ Paid Vacation
§ Vision Insurance
§ Paid Holidays
QCS has one of the broadest scopes of Accreditation of any lab in the country while maintaining one of the finest reputations in the industry for over 30 years. QCS has one of the finest Metrology facilities in the country containing 6 state of the art climate & environmentally controlled laboratories situated within our 20K sq. ft building providing an extremely pleasurable working environment.
Inspector (Entry Level)-1St & 2Nd Shifts
Valence Wichita is currently hiring a FT Inspector.
Perform and document in-process, first article, receiving and final inspections on aircraft parts and processes
Read and interpret information from planning documents, tool design, blue prints, specifications and quality inspection procedures to develop clear, complete and precise records of inspection
Calibrate inspection tools and equipment prior to using
Responsible for performing hand and visual inspections as well as computer assisted inspections for aerospace parts. For hand inspections the use of gauges, micrometers and calipers will be used.
Conducts various quality examinations to assure conformance to customer specifications and company procedures.
Assists Masking Department personnel in ensuring that product is properly mask in preparation for the next process.
Reviews shop travelers, prior to moving parts to the next department, to ensure that operations are performed in a sequential manner and that all previous process steps have been completed in accordance with company process procedures.
Approves customer certifications prior to shipment of product.
Investigates quality concerns/observations with production personnel,
Ensures on-time product flow through supporting various inspection points as required.
Initiates and coordinates the corrective action process.
Communicates problems / solutions to the Quality Manager.
Communicates required information (e.g. drawings, tooling, etc.) to the customer to ensure conformance to customer requirements.
Collects and records various data required for process improvement, corrective action follow-up/assessment, etc.
Performs final / in-process inspection of customer product by comparing product condition to customer specifications to ensure conformance to customer requirements.
Assists the Quality Manager in internal quality assessment audits as scheduled.
Coordinates any shop rework that may be required.
Interface with other individuals from various departments on issues related to quality
Provide and assist operators in understanding and interpreting quality specifications and procedures
Initiate and prepare non-conformance reports and provide to QA administrators
Conduct internal audits as required
Suggests new and improved methods for continuous improvement of the quality management system
Perform other tasks as assigned
Education/Certification:High School Diploma or
Use of precision tools
Experience Required: At least 1 year experience in inspection
Skills/Abilities: Multi-tasking, Communication Skills, Attention to Detail
Quality Control Inspector
Quality Control Inspector - Incoming
GENERAL POSITION SUMMARY: The QC Inspector is responsible for determining fabricated/machined product acceptance using a variety of inspection gages and specifications.
Mechanical inspection of incoming product from suppliers according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements.
Requires demonstrated use of mechanical inspection hand tools and Microhites a plus.
Mechanical inspection is performed on machined parts based on drawing requirements using precision measuring tools
Working knowledge of C=0 sampling plan.
Identify and document results of inspections. Clearly communicating nonconformance’s to specified requirements
Able to access and interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status.
Good organization skills and Microsoft Office software to accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion
Identify and communicate continuous improvement opportunities for the quality program for customers internal and external.
Perform final inspection of completed product as needed.
High School diploma or Two-year technical degree or equivalent from an accredited technical institution is preferred. Machine shop experience in the quality discipline or a related field will be considered.
Strong mechanical background, minimum of 2- 3-years’ experience
Familiar with medical devices, bioprocessing equipment, military or aerospace industry Inspection practices and standards
Requires demonstrated use of mechanical inspection hand tools and Microhites preferred
Requires demonstrated use of basic Microsoft Office tools (Outlook, Excel, Word)
Blue print reading skills
Working knowledge of GD&T
Strong self-discipline and integrity
Knowledge of manufacturing methodologies, Industry Standards, and Regulatory requirements
Team oriented with good written and verbal skills
Experience with ISO 9001, ISO 13485, AS9100 or equivalent QMS standards
PHYSICAL DEMANDS AND WORK CONDITIONS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
•Regularly required to bend, reach, stand, walk and sit daily.
•Frequently required to bend over and pick up and carry up to 40 lbs.
•Eyesight must be correctable to the level required to detect cosmetic and workmanship type defects.
CMM Technician/Programmer / Quality Inspector
Job Title: CMM Technician/Programmer /
Reports To: Quality Manager
Perform dimensional inspection of incoming and outgoing materials, parts and assemblies using hand measuring instruments (micrometers, calipers, height gages, etc.) and/or CMM equipment. Document inspection results in accordance with required inspection criteria and/or reports.
Essential Duties and
Perform inspections of purchased parts or finished company products according to defined criteria using mechanical instruments and/or CMM equipment
Review measured data for accuracy against the CAD data
Create inspection programs directly from the CAD model
Accurately document the results of the inspections and tests
Accurately maintain all controlled document files and test records in a timely and accurate manner
Assist in the writing and updating of inspection procedures, protocol and checklists
Evaluate problems and make initial recommendations for possible corrective action to supervisor
Monitor critical equipment and instrumentation to ensure proper operation and calibration
Work as part of an inspection team to address constraints in incoming and final QC work flow
Maintain a safe and clean working environment
Maintain flexibility to address needs and issues as they are identified
Perform other duties as required
High School Diploma or equivalent
2 years’ experience operating CMM equipment (laser scanner/arm)
Proficient in gauging and metrology skills, including hand tools calipers, pin gauges and CMM
3 years of CAD experience, including surfacing
SolidWorks experience a plus
Meticulous attention to details both in documentation and reporting of results
Basic PolyWorks software experience preferred
Experience in generating AS9102 First Article Inspection Reports
3-5+ years experience in a manufacturing quality environment (preferably regulated or aerospace industry)
General proficiency of Microsoft Excel and Microsoft Word
Ability to read and interpret technical data (drawings, blueprints, GD&T)
Experience with AS9100, ISO13485, or equivalent regulated industries
Ability to work independently
Stand, walk, and/or sit for extended periods of time
Hear sounds and recognize the differences between them
Ability to use hands to handle, control, or feel objects, tools, or controls
Must be able to lift, push, pull, or carry bulky or heavy objects
Ability to manipulate equipment weighing up to 50 pounds
See details of objects whether they are nearby or far away
See differences between colors, shades, and brightness
Ability to work in a manufacturing environment
Ability to wear PPE
[The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions]
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!