Inspector Photographic Equipment Job Description Sample
Electronics Equipment Repairer Inspector
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a ELECTRONICS EQUIPMENT REPAIRER INSPECTOR, Position Description Number D1207000 and is part of the CO CSMS, National Guard.
This position is located at CSMS. The purpose of the position is to inspect the repair of electronics equipment to ensure that physical and operating characteristics are within acceptable standards and specifications.
Learn more about this agency
Uses a wide variety of inspection techniques to inspect standard electronic systems such as radar, radio communications receivers, and transmitters (single band, UHF and VHF), mobile subscriber equipment (MSE), missile guidance systems, laser range finders, and electronic fire control systems. Conducts inspections, diagnoses nature and extent of equipment malfunction, and as required, performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, etc. Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Inspects the full range of equipment as described above at remote work sites in support of field organizations, field units during field exercise training periods, or before major pieces of equipment are sent for repair to a supporting maintenance facility. Performs other duties as assigned.
Occasional travel - You may be expected to travel for this position.
- Job family (Series)
2604 Electronics Mechanic
Radio Equipment Repairers
Repairers, Radio Equipment
HelpRequirements Conditions of Employment
Membership in the Colorado Army National Guard or eligible to transfer into the COARNG.
Must hold the grade of E-5 thru E-8.
Compatible Military Assignment 16, 25, 35, 45, 91 or 94 series MOS or able to obtain it within one year of hire.
Submit all required documentation.
May be required to successfully complete a probationary period.
Participation in direct deposit is mandatory.
For positions requiring the operation for motor vehicle, candidates must have a valid state driver's license for the state in which they live or are principally employed.
For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
Military Grades: E-5 thru E-8
Compatible Military Assignments: 16, 25, 35, 45, 91 or 94 series MOS or able to obtain it within one year of hire
1.Specialized experience will be used to determine qualifications for the announced position.
2.An applicants RESUME must provide, in detail, how they meet each specialized experience listed below.
3.It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
4.If education or a degree is required as part of the "Specialized Experience", you must include transcripts.
DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet.
You will be immediately disqualified if you fail to include specialized experience in your resume.
Must have at least 18 months of Specialized Experience in each of the following:
1.Experience in utilizing principles, basic functions and application of theory of electronic systems or equipment.
2.Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems.
3.Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment.
4.Experience in using complex test equipment such as deviation meters, complex special test panels, etc.
5.Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
Education cannot be substituted for Specialized Experience for this position.
Fixed Equipment Inspector
Job Role Summary
Fixed Equipment Inspectors will plan, conduct, and document examinations of plant equipment, vessels, and piping for the purpose of maintaining mechanical integrity and operating reliability. This is a day position, subject to future changes based on business needs. The position is located in Beaumont, Texas.
Job Role Responsibilities
Ensure equipment mechanical integrity through compliance with API inspection codes, generally accepted industry practices, and internal company inspection practices.
Perform basic Non-Destructive Examinations (NDE)
Support unit operations through inspection of plant equipment changes and failures.
Use computerized databases for inspection recordkeeping.
Maintain inspection and equipment files up to date.
- Demonstrated work experience as a plant inspector with certification in API 570 or API 510 inspections.
Certifications in API 570, 510, 653 and CWI.
Basic knowledge of metallurgy and corrosion associated with refinery/petrochemical process.
Good written and verbal communication skills.
ExxonMobil is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.
Nearest Major Market: Beaumont
Job Segment: Inspection, Engineer, Refinery, Engineering, Energy
Photographic Tech / Commercial Photography: Adjunct / Substitute Instructor Pool (College Credit)
Posting Details (Default Section)
Closing Date: Open Until Filled No Classification Title PHOTOGRAPHIC TECH / COMMERCIAL PHOTOGRAPHY: Adjunct / Substitute Instructor POOL (college credit) Working Title Adjunct Faculty Recruitment Limits Location District Wide Pay Information
At the time that an offer of assignment is made, proper salary placement is contingent upon receipt of OFFICIAL (sealed) transcripts and Verifications of Previous Work Experience (if applicable). Instructors with advanced coursework and/ or experience shall be placed on the appropriate class and step on the Adjunct College Salary Schedules, effective the first month following receipt (in Human Resources) of the official transcripts and Verifications of Previous Work Experience (if applicable). Initial salary placement will be at the first class/step until all required documentation has been submitted.
Click here for the current salary schedule or you may view the current salary schedule by using the "Salary Schedules" link to the left.
If you would like to open the link in a different tab or window, right click and select the option.
FLSA Status Exempt (does not accrue overtime) Position Type Adjunct Bargaining Unit: AFT/College Faculty Range (na) Department District Wide The Position
NOTE: The San Diego Community College District accepts applications for adjunct (part-time/substitute) positions for our three college campuses (City, Mesa, Miramar) and various continuing education centers on a continuous basis. However, it does not necessarily imply there are immediate openings. If you meet the required minimum qualifications, your application will be included in the adjunct pool for possible assignments in the fall, spring, and/or summer semesters of the academic year. Hiring departments utilize the adjunct pool when there is a need and will contact you directly should you possess the qualifications they are seeking. Applications are purged approximately one year from submittal, at which time you will receive an automated e-mail notice to re-apply if you wish to remain in the pool.
Part-time/temporary faculty positions offer flexible hours and the opportunity to assist a diverse group of adult students in achieving their educational goals. As one of the largest community college districts in southern California, we offer a wide range of opportunities in transfer, general education, vocational and occupational programs. These part-time positions are as-needed and applicants should live within commuting distance to San Diego.
Assignments may include a combination of day, evening, weekend, and/or off-campus classes.
Primary duties of adjunct faculty members are related to curriculum and teaching; the assignment is divided between lecture and lab classes as determined by the department. Adjunct instructional faculty are required to be available to students outside of class.
Provide instruction in accordance with established curriculum and course outlines.
Maintain appropriate standards of professional conduct and ethics.
Maintain current knowledge in the subject matter areas.
Fulfill professional responsibilities of a part-time/temporary faculty member.
Teach all scheduled classes.
Maintain accurate records.
Provide quality instruction, create and maintain an environment which emphasizes teaching and learning and encourages free discussion of ideas, interests and issues.
Degrees must be from regionally accredited institutions.
1.Any Bachelor's degree AND two (2) years of experience; OR,
2.Any Associate degree AND six (6) years of experience; OR,
Desired Qualifications Equivalency
If you do not possess the exact degrees listed above or if you anticipate receiving the required degree prior to the start of teaching classes, please complete a "Request for Equivalency Form" (link to the left) and attach it during the application process.
Applicants with foreign degrees from colleges or universities outside of the United States must have their coursework evaluated by a professional association that is a member of the National Association of Credential Evaluation Services (NACES). A copy of the evaluation must be submitted with your on-line application.
Licenses/Certificates/Credentials: Commitment to Diversity:
All applicants must have demonstrated cultural competency and sensitivity to and understanding of the diverse academic, socioeconomic, cultural, disability, gender identity, sexual orientation, and ethnic backgrounds of community college students and staff.
Special Instructions to Applicants: Working Conditions
Variable, depending on assignment.
Conditions of Employment: Additional Information:
Newly hired faculty members are required to submit official transcripts and pay a fingerprint processing fee.
All new SDCCD employees must provide a Certificate of Tuberculosis Exam for initial appointment, and must renew the certificate every 4 years as a condition of continuing employment.
Please note that an employee may be transferred to any site at the option of the Chancellor.
Posting Number AJ00286
Rotating Equipment Inspector - Monaca, PA
The Shell Polymers Monaca Site, formerly known as Project Franklin, will be a world-scale petrochemical plant in Western Pennsylvania that upgrades locally-produced ethane from Marcellus and Utica shale formations gas production to make polyethylene. The petrochemical complex will consist of a world-scale Ethane Cracker Unit (ECU), multiple polyethylene (PE) units, PE logistics and supporting OSBL (utilities, general facilities, storage, and hydrocarbon logistics). The FID (Final Investment Decision) was made in Q2 2016 and the project is now in Execute Phase. As construction of the site progresses, the site is now growing to support Commissioning and Start-Up activities and prepare for full operation in the early 2020s.
The Site is located in the Pittsburgh, PA area (Monaca, PA). Not only we are building a world-class asset, but also we're building a world-class asset organization. This position is critical to the mission of team, and this will promise to be a once-in-a-lifetime experience.
The position will work in the Engineering group within a combined department consisting of: Engineering, Maintenance, Projects and Turnarounds. As part of the Penn Chem Plant Asset Team, the position will report to the Rotating equipment/ MEC Manager.
The successful candidate will provide specialist field support through Commissioning and Startup (CSU) in support of the "One Team" delivery model between the Asset and the Project. Prior to CSU, it is important to note that the successful candidate will initially support Construction in the Project Team (P&T), then transition back to the Asset Team (Downstream Manufacturing), as construction nears completion. During construction, this role will support construction and pre-commissioning activities by working as a Rotating Equipment Inspector and taking daily instruction from the P&T Engineering & Inspection team. Candidate will be expected to provide various support deliverables including quality assurance while in parallel learning the processes and equipment that they will eventually support during run and maintain. The role will keep close touch with their direct line. This is a unique opportunity to see the kit as it is constructed and take those learnings back into the run and maintain organization.
The Mechanical/Rotating Equipment Specialist/Inspector role is to provide technical/maintenance support to operations, maintenance, turnaround, projects and engineering for mechanical equipment. The Mechanical Equipment Specialist will work to improve equipment reliability and reduce maintenance cost via investigation of failures, determination of root causes and completion of corrective actions. Machinery includes pumps, compressors, motors, turbines, blowers, fan, miscellaneous mechanical equipment (SPMs), etc.
Take a leadership role in assuring the mechanical activities are performed safely and in accordance with them Site safety policies.
Operations Support: First point of contact for Operations when technical questions or issues with machinery arise (including off-hours). Assist in revising critical equipment procedures.
Equipment Surveillance: Assist with identifying the appropriate checks. Conduct weekly (minimum) unit walk-through. Check relevant equipment pressures, temperatures, leaks, vibration, noise, lube oil (levels, condition, flow), performance, etc. Those items that may need immediate attention should be brought to Operations for correction. Assist Operations in understanding the operation of their equipment so that they can observe these items daily.
Equipment Troubleshooting: Troubleshoot machinery problems to understand probable cause of failure and notify operating team of actions to prevent reoccurrence. Generate repair notification containing description of issue and proposed solution or improvement to address the issue.
Equipment Repair: First point of contact for crafts for technical expertise and training on critical equipment repair. Need to maintain a collaborative relationship with the Maintenance Planner, Maintenance Team Leader, and Crafts.
Reliability Improvement: Review monthly MTBM data, conduct failure analysis, propose solutions. Follow equipment failures on the Bad Actor list, define problem, determine root cause, and work with Engineer to recommend changes.
Documentation: Maintain equipment history, Bad Actor list, document Overhaul Reports, and maintain equipment folders. Ensure equipment history is well captured and documented in GSAP.
Planning: Maintain knowledge of equipment status within the assigned unit. Develop, review, and audit preventative maintenance workscopes, timing, and materials.
Provide support for Rotating Equipment Rotating Equipment scopes for planned major overhaul and major inspections.
Turnaround Support: lead and/or assist in workscope development, specify and inspect needed parts, develop QA/QC plan. Serves as a mechanical coordinator on special mechanical equipment jobs during maintenance outages and/or projects as required.
Serves as a craft foreman on turnarounds and special mechanical equipment jobs/projects in the production module as required.
Takes a lead role for the discipline in developing, planning, and executing equipment turnarounds.
Project Support: This task may include approving detailed scopes, specifications and design review. This task will include the interaction with process engineers in project development, interaction with manufacturers in procurement of machinery, and interaction with contractors during field execution.
Audit maintenance activities for compliance with established QA guidelines, i.e. (Machinery Repair Standards, OEM specifications, etc.).
Provide mechanical training, as required, to Operators, Craft workers, and relief Mechanical Inspectors.
Identifies and recommends performance and reliability improvements for the module's rotating equipment.
Reviews parts on major/critical machinery to assure that all necessary parts are stocked.
Reviews GSAP work tickets and operations logs to identify and understand mechanical equipment problems.
Tracks mechanical equipment reliability in his area and publishes timely reports to communicate progress.
Participates in the established MTBR tracking program and Bad Actor list, identifying "breakdowns" in GSAP per the global MTBM standard. Attends the monthly breakdown meeting.
Assists ESP dept with the mechanical equipment preventative maintenance programs. Reviews PM frequencies to assure cost effective maintenance.
Keeps abreast of current discipline standards (API, MRS, EGGS, etc.) and new technology.
Follows work sent to the shop and outside shops to assure adequate information is supplied and the job is completed in a timely manner meeting established requirements.
Familiar with SKF vibration program, Lube Analyst program, and Bently Nevada vibration monitors for condition monitoring of equipment.
Establishes the baseline seal leakage rate for major centrifugal compressors (usually after a major overhaul). Monitors and trends the seal leakage rate as required.
Generates and tracks Field Inspection Reports per the FIR procedure.
Heavy Equipment Inspector
Heavy Equipment Inspector
Reports to: Operations Director
Silver Creek Materials (SCM) is a surface mining and large-scale composting operation on the west side of Fort Worth, Texas in need of an inspector with working and mechanical knowledge of the heavy machinery used in all aspects of our business. They will need to identify any problems before the machine becomes disabled and or becomes a safety hazard. The inspector must be able to perform visual and hands-on inspections of all machinery and plants and be able to provide feedback to our Operations Manager regarding their conditions.
Essential Duties, to include but not limited to:
Requires understanding of MSHA regulations regarding condition of heavy equipment in a mining operation as well as mechanical knowledge of heavy machinery.
Competently read and understand product support manuals.
Locate and inspect the following: all greasing and wear locations, lubrication points, fluid levels, spot inspections of belts, wear items, fasteners, bearings, etc.
Will also be required to remove inspection covers and check engine and cabin air filters.
Inspect radiators and condensers for cleanliness.
Ability to safely move machinery and check operation.
Possibly perform light mechanical duties.
Will need to assure all tires are in safe working condition with proper pressure and tread.
Inspect plants for belt alignment and tension.
Identify premature wear and tear.
Might possibly pressure wash when needed.
Read and gain understanding of the following: various grease types, greasing intervals, temperature ranges for grease types, etc.
Knowledge of hidden fittings not necessarily known by the operator.
Keep accurate records and documentation of all findings.
Will need to maintain accurate time sheets for allocation of time to each department.
Promote a team environment
Must be able to read English text found in all machinery manuals.
Excellent verbal, written and interpersonal communication skills and capable of maintaining good relationships with company, regulatory agency personnel and customers.
Excellent time management skills; ability to prioritize and manage multiple tasks.
Must have the ability to speak fluent English and conversational Spanish
Benefits: Health, Dental, & Vision Insurance. Vacation & Sick Leave. Paid Holidays.
DuPont is seeking an experienced or entry level Equipment Inspector to perform API (American Petroleum Institute) Authorized Inspector duties and NDE testing methods at the Spruance Site in Richmond, VA. Below is a list of certifications and requirements for the Equipment Inspector to ensure safe and reliable operation of the plant and compliance with jurisdictional and regulatory requirements.
It is expected that you will successfully obtain the following certifications within the timeframe allotted:
API 570 within the first year
NBIC, API 510 & API 653 by your third year
API 580 by your 5th year
In addition to the above certifications, you will be required to obtain the following ASNT (American Society of Non-Destructive Testing) certifications per SNT-TC-1A Level II:
- Level II in VT (Visual Testing) or AWS-CWI, MT (Magnetic Testing), PT (Penetrant Testing), UTT (Ultrasonic Thickness Testing), ET (Surface Eddy Current Testing)
You will be required to maintain all certifications necessary to perform job functions at the level expected by the site and specified in this job description. You will also act as a site resource for all ASME, API, National Board and other code interpretations pertaining to storage tanks, pressure vessels and process piping systems.
Become proficient in the Meridium™ inspection modules (Inspection Manager, Thickness Monitoring and Risk Based Inspection)
Perform scheduled inspections as identified in Meridium™ Inspection Manager
Assess equipment condition per company and industry standards
As an NBIC Owner/User Commissioned Inspector, make suggested actions and recommendations pertaining to the repair and/or alteration of registered pressure vessels following the National Board code and the Rules and Regulations of the State of Virginia.
Function as an API Authorized Inspector, which includes creating/revising/authorizing equipment inspection briefs and authorizing repairs to piping, storage tanks and non-registered pressure vessels.
Issue inspection reports that identify recommendations and suggestive actions and follow up to ensure proper and timely completion.
Assist areas in performing Fitness for Service where appropriate
Maintain electronic and hardcopy files of equipment data and history
Update the appropriate RBI to re-verify inspection tasks and frequencies
Coordinate with the area to get inspection reports signed and to deliver inspection labels
Contract Inspection Services
Act as contract administrator for onsite contract inspection resources
Responsible for setting expectations and assist in coordinating onsite contract inspection resources.
Act as first contact between the areas and 3rd party inspection personnel (typically for heat exchanger tube testing)
Maintain our Owner User Inspection Certificate
Maintain annual Owner User Certificate of Accreditation
Participate in State/National Board review every three years
Submit annual report to the State of Virginia related to the previous twelve-month pressure vessel inspection activity.
Ensure our Owner User QA Manual is up to date
Act as the Site Welding Champion and support the Site Weld Inspector as needed
Review and update the Site Weld Procedure as required
Maintain safety equipment (i.e. harnesses, lanyards, protective equipment, etc.)
Maintain annual respirator fit testing and respirator breathing equipment
Maintain PSM required area specific safety training to work in areas unescorted.
Ensure all TLMs are completed on time
Provide QA/QC support for repairs, alterations and new fabrications as required.
Participate in PSM and Regulatory audits
Assist areas with performing either fabrication vendor audits or to performing inspection work on repaired equipment
Evaluate new technology and develop programs for specific application to plant testing/inspection.
Order supplies as needed, both for the office and NDE inspections
Maintain certification/standardization/calibration of all NDE testing equipment.
Maintain active role in the State wide Virginia Boiler and Pressure Vessel Inspector's Association.
Assist in failure analysis investigations
Be available 24/7 for requests from customers to attend to their needs to assist in continued operations.
Attend to any calls from customers for "Non-Routine" inspection requests.
MINIMUM SKILLS REQUIRED
High school diploma or equivalent
Must have at least one of the following API certifications: API 510, API 570 or API 653
Must have UT Level II and PT Level II certification
Minimum 5 years of industry experience
Proficient skill in utilizing Microsoft™ Office applications such as Excel, PowerPoint and Word.
Excellent verbal and written communication skills
Must be self-motivated
Must have the ability to work well in a team environment
Must have leadership skills
Must be able to lift/carry 55 pounds
Must be comfortable with heights and climbing ship's ladders
Must be comfortable entering confined spaces
Must be able to pass the Jaeger Visual Acuity test
Must be able to wear a respirator
Must have a valid driver's license
Any or all of the certifications listed above. Preference will be given to someone with API 570 certification.
Knowledge of the following codes and standards is preferred: ASME Section VIII Div. 1, ASME Section V, ASME Section IX, ANSI B.16.5, ANSI B.31.3, ANSI B.31.1, NBIC (National Board Inspection Code), API 579 (Fitness for Service) and API 580/581 (Risk Based Inspection)
Good working knowledge of pressure relieving devices and applicable codes.
Proficient in Microstation® and the Meridium® inspection modules (Inspection Manager, Thickness Monitoring and Risk Based Inspection)
DowDuPont (NYSE: DWDP) is a holding company comprised of The Dow Chemical Company and DuPont with the intent to form strong, independent, publicly traded companies in agriculture, materials science and specialty products sectors that will lead their respective industries through productive, science-based innovation to meet the needs of customers and help solve global challenges. For more information, please visit us at www.dow-dupont.com.
The positions represented by this job posting are aligned to one of the three divisions, Agriculture, Materials Science or Specialty Products, which are expected to separate from DowDuPont into stand-alone public companies. Information on the division alignment will be provided during the recruitment process.
Fixed Equipment Inspector
Chevron is one of the world's leading energy companies, with approximately 60,000 employees working in countries around the world. We explore, produce and transport crude oil and natural gas; refine, market and distribute fuels and other energy products; manufacture and sell petrochemical products; generate power; and develop future energy resources, including biofuels and geothermal energy.
Chevron is accepting online applications for the position of Fixed Equipment inspector located in El Segundo,CA ,through January 30th,2019 .
Overview External: Chevron is one of the world's leading energy companies, with approximately 60,000 employees working in countries around the world. We explore, produce and transport crude oil and natural gas; refine, market and distribute fuels and other energy products; manufacture and sell petrochemical products; generate power; and develop future energy resources, including biofuels and geothermal energy. Chevron is accepting online applications for the position of Fixed Equipment Inspector located in El Segundo, CA through Date
Responsibilities for this position may include but are not limited to:
Serve as a member of the Fixed Equipment Inspection Group at the Chevron El Segundo, California Refinery. This team provides inspection services to all process Plants and off plot facilities in the refinery.
Ensure the safe and reliable operating condition of fixed equipment through scheduled inspections and guidance on high quality repairs that meet corporate and code requirements.
Report to the Fixed Equipment Inspection Team Lead at the refinery.
Plan, coordinate and perform required internal and external compliance inspections for tanks, vessels, columns, and piping at code and jurisdictional mandated intervals.
Provide guidance on required equipment repairs to meet both corporate and code requirements.
Implement and maintain equipment reliability plans and a risk based inspection (RBI) methodology for assigned area. Provide updates to both when process conditions dictate or inspection related updates are needed.
Participate in design reviews for new construction and equipment to ensure it meets company and code requirements as well as Design for Reliability factors.
Participate in shutdown inspection scope planning. During turnarounds, manage inspection requirements such as internal inspections, defining required repairs, and NDE scheduling and validation
Intermittent travel with possible nights and weekend work hours based on refinery needs
Maintain inspection data, master equipment list, records, and recommendations in computer based reliability data management applications (i.e. Meridium).
High school diploma or equivalent.
Minimum of 10 years refinery experience with 5 years working as a API-510, 570 or 653 Unit Inspector or equivalent experience. A minimum of 8 years refinery experience working within Operations or Maintenance will be considered as equivalent experience.
Demonstrated leadership abilities
Strong oral and written communication skills.
Basic knowledge of refinery process units operations.
API certifications ( API -570, 510 and/or 653)
ASNT TC-1A Level II Non Destructive Examination Ultrasonic Thickness, Magnetic Particle Testing , Penetrant Testing, and Radiographic Testing certification
NBIC commission. Will consider API certifications & technical experience. Demonstrated knowledge of refinery corrosion mechanisms
Demonstrated Knowledge of basic metallurgy
Demonstrated knowledge of basic welding applications
Experience performing on-stream & shutdown inspections of refinery equipment and piping.
Demonstrated ability to perform, interpret, and analyze Infrared Thermography
Demonstrated ability to perform, interpret and analyze conventional and digital radiography
Demonstrated strong computer skills related to maintaining Inspection Database and analyzing CM data.
Knowledge of fixed equipment design and maintenance practices in processing facilities
Knowledge of fixed equipment inspection requirements and practices, non-destructive examination technologies and interpretation and analysis of inspection data
Relocation will be considered.
Expatriate assignments will not be considered. Chevron regrets that it is unable to sponsor employment Visas or consider individuals on time-limited Visa status for this position.
Regulatory Disclosure for US Positions:
Equipment Inspector - Heavy Equipment
Move, Build, Grow your career!
As the premier global asset management and disposition company, Ritchie Bros. helps thousands of people around the world buy and sell heavy equipment, trucks, and other assets every month. With our multiple onsite and online selling platforms and commitment to first-class customer service, Ritchie Bros. is trusted worldwide for making buying and selling easy, efficient, fair, and transparent. If you're an innovator with an entrepreneurial spirit, we want you to join our growing team – employed in a wide variety of positions from sales to operations to corporate functions – as we transform the global used equipment market.
Join us on our journey and move forward with us, build your success, and grow your career.
Ritchie Bros. Auctioneers has an immediate opening for an Equipment Inspector at our Forth Worth, Texas auction site. This role is ideal for someone with a background in conducting heavy equipment inspections. No auction experience is needed to work in this role, and lots of training will be provided.
Our Equipment Inspectors are part of our Detailed Equipment Information (DEI) team. They perform accurate and thorough visual inspections (eg. wear points, damage, hour meter readings, etc) and functional testing (eg. basic operations) on heavy equipment. They also:
Gather and verify equipment inventory information (eg. contract proofs, equipment additions, serial numbers, etc.).
Identify and record equipment components, accessories and asset details
Verify equipment descriptions, based on our Equipment Standards Manual
Ensure the quality of equipment data and other related information
Verify requirements for warranty applicable items
Compose and take photos of the equipment
Provide assistance as required to the DEI Team
Assist the Sales team with appraisals and write-ups in the field between peak periods
Promote a culture where the health and safety of our employees and customers is top priority for all
Here's what you bring:
High school graduate with some post-secondary education is a must
Prior experience in equipment management (inspections, inventory and appraisals) and/or inventory control management, preferably in the auction or heavy equipment business
Knowledge of industrial and/or agricultural equipment, trucks and trailers
Proficiency using computers, MS Office Suite products (Word, Excel) and digital cameras
Top-notch written and verbal communication skills (you will be using a 2-way radio and a desk phone)
Good penmanship – we need to be able to read your writing and printing easily
Excellent organizational skills, a keen eye for detail and a commitment to accuracy
Experience working independently and collaboratively in a team-oriented environment. You thrive working as part of a team, and pitch-in wherever needed
Strong time management skills; the ability to multi-task effectively and prioritize work are essential
A strong customer service orientation
You're process-oriented, hands-on, and ready to roll up your sleeves to succeed in this role
You like to work hard, and still have fun on the job
This job will require you to:
Maintain a valid, clean driver's license
Work both indoors and outdoors year-round, and climb on and off large equipment and trucks
Because we are an event-driven company, we'll need you to work regular overtime, including weekend hours, at onsite auction sales. You can expect to work extra hours prior to each sale, during each sale, and for after each sale.
What we offer:
Our success is built on the drive and dedication of our people. As we grow around the globe, there will be many opportunities to advance your career – we've proven this throughout our 60 years in business. And, we'll support you along the way. Here's how:
Competitive hourly salary paid overtime
Affordable, comprehensive medical & dental benefits
Ongoing training, professional development and a tuition reimbursement program
Safety equipment subsidy
Meals catered at auction time
For an idea of what our auctions are like, you can check out some videos on YouTube.
Want to learn more about the company? Visit our Career site, LinkedIn or connect with us today through Facebook or Twitter.
Established in 1958, Ritchie Bros. (NYSE and TSX: RBA) is a global asset management and disposition company, offering customers end-to-end solutions for buying and selling used heavy equipment, trucks and other assets. Operating in a multitude of sectors, including construction, transportation, agriculture, energy, oil and gas, mining, and forestry, the company's selling channels include: Ritchie Bros. Auctioneers, the world's largest industrial auctioneer offers live auction events with online bidding; IronPlanet, an online marketplace with featured weekly auctions and providing its exclusive IronClad Assurance® equipment condition certification; Marketplacee, an online marketplace offering multiple price and timing options; Mascus, a leading European online equipment listing service; and Ritchie Bros. Private Treaty, offering privately negotiated sales. The company also offers sector-specific solutions including GovPlanet, TruckPlanet, Kruse Energy Auctioneers, and Cat® auctions, plus equipment financing and leasing through Ritchie Bros. Financial Services. For more information about the unprecedented choice provided by Ritchie Bros., visit RitchieBros.com.
Ritchie Bros. is an equal opportunity employer and ensures nondiscrimination in all activities in accordance with all applicable laws. This position is open to all qualified applicants who are legally entitled to work in the country in which this job is located. Candidate selection is made by Talent Acquisition. Only electronic applications can be accepted. No agency calls please.
The Arkansas Department of Environmental Quality (ADEQ) Inspector is responsible for conducting field inspections of public and privately-owned air, water, and solid waste permitted facilities. This position is governed by state and federal laws and agency policy.
Typical FunctionsConducts on-site inspections of municipal, industrial, and public and privately owned regulated facilities to ensure compliance with environmental laws and restrictions. Inspects pollution control devices and water treatment facilities for proper installation, operation, and condition. Reviews and verifies records required by permit or regulation, reporting procedures, and sampling and analytical techniques utilized by facility.
Prepares inspection reports, including a narrative, if violations are found, and a letter to permit owners, confirming compliance/citing violations and recommending remedial action required. Collects environmental samples for laboratory analysis and takes photographs to document findings. Investigates complaints of air, water, and solid waste pollution on regulated, permitted, and non-permitted sites, determines validity of complaint, cites violations of state and/or federal laws and regulations, documents findings, and assists violator in correcting the problem; may conduct follow-up investigations.
Responds to emergency situations and monitors clean-up ensuring that all efforts are made to contain and/or remove pollutants in order to eliminate or minimize environmental impact, and prepares incident report documenting findings. Performs other duties as assigned. Special Job DimensionsFrequent in-state travel is required.
Knowledge, Abilities, and SkillsKnowledge of state and federal environmental regulations. Knowledge of investigation standards and procedures. Knowledge of the principles of natural and environmental sciences affecting pollution control.
Knowledge of scientific testing equipment and analytic procedures utilized to determine compliance with regulations. Ability to conduct on-site scientific inspections, evaluate findings, and determine compliance with environmental regulations. Ability to obtain emission data samples for laboratory analysis.
Ability to compile data and prepare reports. Ability to respond to emergency situations and monitor containment/removal of pollutants. Ability to train others in pollution control procedures.
Minimum Education and/or ExperienceThe formal education equivalent of a bachelor's degree in biology, chemistry, environmental science, health science, mathematics, or a related field; plus one year of experience in pollution control-related or environmental activities. Preferred Qualifications Self-driven individual with strong written and oral communication abilities
Previous experience conducting inspections and investigating complaints
Experience understanding and interpreting state and federal asbestos regulations
Certificates, Licenses, RegistrationsMust possess a valid Arkansas drivers license. Additional requirements determined by the agency for recruiting purposes require review and approval by the Office of Personnel Management.
OTHER JOB RELATED EDUCATION AND/OR EXPERIENCE MAY BE SUBSTITUTED FOR ALL OR PART OF THESE BASIC REQUIREMENTS, EXCEPT FOR CERTIFICATION OR LICENSURE REQUIREMENTS, UPON APPROVAL OF THE QUALIFICATIONS REVIEW COMMITTEE. Agency Specific InformationSALARY: Starting salary is $36,155. A higher starting salary would apply only if a promotional opportunity for a current State employee.
REQUIRED: If the job you are applying for requires a college degree or professional certification, a copy must be submitted at time of interview.
If you are a Veteran, Disabled Veteran or a Surviving Spouse of a Deceased Veteran and remain unmarried at the time you are seeking preference and you are a citizen and resident of this state, you shall be entitled to Veteran's Preference. Please submit the DD-214 and other official documentation at the time of the interview.
Applications are screened from information on State Application. List ALL work and/or volunteer experience in "Employment Work History" Section.
Resume WILL NOT Substitute. Incomplete applications will not be processed.
Direct Deposit of net pay [checking and/or savings account] is required for employment [Act 1887 of 2005].
5% Mandatory contribution to AR Public Employee Retirement System.
Tobacco Free State Agency.
New employees hired in 2014 or later will be automatically enrolled into the Arkansas Diamond Deferred Compensation 457 Plan with a 3% automatic deduction. You have 90 days from your first deduction to opt out if you decide not to participate.
Authorized Inspector - Lancaster, PA
The Hartford Steam Boiler Inspection and Insurance Co (HSB) is seeking an Authorized Inspector to provide ASME, NBIC, PED, IC, TPI, or other required inspections for 2 part-time shops in the Lancaster, PA area, as well, as providing coverage to other areas as needed.
This field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently. A successful inspector will have excellent communications skills and the ability to work with HSB clients and customers in a professional manor with high integrity.
The position has minimum qualifications of a high school diploma and work experience with boilers and pressure vessels or nuclear reactors. The required work experience can be reduced if you have an engineering degree.
Our entry level inspectors start with 12 weeks of intensive training to gain the necessary experience and qualifications required to perform inspection during construction, repairs or operation of in-service equipment.
Training is provided annually for all of our inspectors, which is developed and supported by our technical industry experts.
The Hartford Steam Boiler Inspection and Insurance Company has a long and respected reputation as the leader in our industry with a primary focus on workplace safety.
Engineering Fee Services:
Global Inspection and Engineering Services is an inspection focused engineering division of HSBIIC with over 450 engineers, inspectors and auditors located in over 27 countries. The world's largest ASME Authorized Inspection Agency, GIES Inspectors are instrumental in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our Global Inspection and Engineering Services personnel is focused on the beginning of the life cycle of the type of equipment insured by HSB and is an important part of HSB's comprehensive understanding of the insured equipment. Services include:
Review and acceptance of Job Packages
Monitoring of Quality Control System
Witnessing final Hydrostatic Test
Review and signing of required documentation
High School Diploma
Minimum 3 years in the operation, fabrication or installation of boilers and pressure vessels.
ASME and NBIC Code Knowledge
Meet the required experience and qualifications to take the NB exam
Excellent human relationship skills
Basic algebra skills
Computer skills for Microsoft Office and Lotus Notes applications
National Board Card with IS Commission with "A" Commission
5 years with experience in boiler and pressure vessel design, fabrication and testing
AWS CWI, ASNT Level I and II in visual inspection, dye penetrant and radiography
Quality insurance inspection experience
Experience in coordinating and facilitating 3rd party inspection activities and reporting of same
This position requires a person to routinely move about at a site facility. As such, candidates for this position must be able to perform the below physical requirements:
Ability to crawl through 11" X 15" openings into confined spaces. Enter and function in very tight confined spaces.
Ability to climb vertical ladders and several stories of stairs.
Ability to climb and function at heights of at least 30 feet, and up to eight(8) to ten (10) stories.
Ability to perform bending, stretching and twisting motions.
Ability to withstand temperature variations. Temperature variations could be as much as 70 degrees.
Ability to walk 3-5 miles.
Ability to stand for long periods of time and able to remain in a stationary position 50% of the time.
Ability to lift own body weight while hanging or entering a confined space with associated safety equipment
Ability to lift equipment up to 50 lbs.
Visual acuity of 20/20 (natural or corrected) and identify colors.
Ability to hear (corrected) the sounds of equipment operation.
We are an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.
The work environment characteristics, and any physical and mental requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!