Inspector Receiving Job Description Sample

SUMMARY:

The 14 Code of Federal Regulations CFR Part 145 Repair Station Receiving Inspector will be responsible for processing incoming material to ensure that all AAR and government standards are met.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Process daily incoming raw material, products, parts, articles, etc. to meet Quality Control requirements as stated in the Repair Station Manual, Quality Control Manual, Repair Station Quality Manual, etc.

• All other duties as assigned.

CORE COMPETENCIES:

• Commitment to company values and ethics

• Dependability personally responsible, completes work in a timely manner, and performs tasks accurately

• Motivation must maintain a positive attitude and strong work energy

Organization very detail oriented and always comes prepared

• Communication excellent interpersonal and oral and written communication skills

• Analytical skills must be able to gather information and use data to determine cause and effect for complex problem solving

QUALIFICATIONS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

• Ability to inspect products by various methods visual, measurements, etc.

• Ability to interpret associated paperwork certifications, C of C s, etc. to verify compliance with Repair Station requirements

EDUCATION and or EXPERIENCE:

• High school diploma or general education degree GED required.

• Must have a minimum of 1 year related experience and or training.

• Aviation experience preferred.

• FAA Mechanic Certificate with Airframe and Powerplant ratings preferred.Eligible to obtain FAA Repairman Certificate.

• Experience in FAR Part 145 Repair Stations preferred.

PHYSICAL DEMANDS WORK ENVIRONMENT:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility and be able to meet the physical job demands as described on the Positions Physical Job Demand Assessment. Candidates should be able to adapt to a traditional warehouse environment.Must be able to lift and carry up to 50 pounds and comply with OSHA standards

May be required to use hand tools and precision measuring equipment

Employees in this position will be included in the Drug and Alcohol Testing Program per FAA Regulations

Overview

Triumph Group designs, engineers, manufactures, repairs and overhauls a broad portfolio of aviation and industrial components, accessories, subassemblies, systems and aircraft structures. We partner with original equipment manufacturers (OEMs) and operators of commercial, regional, business and military aircraft worldwide, to provide products and services that solve their hardest problems. So whatever the part, component or complexity of assembly, Triumph is committed to quality, service and meeting the specialized needs of each customer.

Triumph participates at all levels of the aerospace supply chain – from single components, to complex systems, to aerospace structures and their contents. We provide solutions for the entire product life cycle of an aircraft – from raw material to aftermarket service. Our unique ability to integrate a broad range of products and capabilities is our competitive advantage.

Uses predetermined methods, operations, setups, and prescribed specifications to inspect visually in-process and completed electronic units and subsystems, precision electromechanical assemblies, or mechanical units and sub-assemblies.

Responsibilities

• Work from prints, tables, specifications, and acceptance criteria or data to layout and inspect a wide variety of parts, materials, components, and sheet metal.

• Ensure the integrity of the Quality Management System is maintained when related to quality assurance processes.

• Verify product conformance through extensive use of inspection tools and gauges.

• Verify completion of Quality documents and accurate representation of product flow throughout the system.

• Assist in the maintenance of the Calibration System and it's tools and gages.

• Effective communication of results to manufacturing operations.

Competencies:

• Teamwork

• Communication

• Reliability

• Initiative

Qualifications

Basic Qualifications:

• High school education or equivalent.

• Relevant experience in quality assurance (3-5 years preferred)

• Must be able to read, understand and interpret prints as well as customer specifications and requirements

• Able to interpret parts list and assembly instructions

• Proficient understanding of GD&T

• Proficiency in fundamentals of dimensional metrology.

• Proficient in the use of hand tools, height gages, gages, and fixtures.

Overview

Inspector-Receiving is responsible to Supervisor Inspection. Inspect both incoming and outgoing material for quantity, quality and conformance to specifications and/or other applicable requirements.JOB DUTIES:

ADA ESSENTIAL FUNCTIONS:1. Monitor daily deliveries, accept or reject shipments that are not received in satisfactory condition.2.

Separate delivered items by priority and/or department.3. Open, inspect, check condition, correct documentation and quality of each item and verify items are in accordance with the requirements of the purchase order.4. Reject and identify all decrepit items, annotate this information in computer system and place item in bond.5.

Receive all items, which are acceptable into the computer system.6. Monitor outgoing shipments for proper documentation and packing.

Qualifications

MINIMUM:
1.High School Diploma or equivalent.2. A&P or Repairman Certificate with Parts Inspection Limitation.3. Must have basic knowledge of computer systems.4. Must have working knowledge of aircraft documentation.5.

Read, write and understand English language.

Assesses devices in-process and upon completion to ensure regulatory and company guidelines have been met and devices meet operational standards as designed.

Job Functions

• Assign work to lower level employees ensuring balanced work along lines and across shifts, which may include establishing work schedules

• Perform visual, dimensional, and functional inspection across all components and/or finished medical device products using all applicable tools and equipment such as magnifying lamp, microscope, vision inspection system, etc. to ensure conformance with design specifications - working independently at the highest levels of productivity

• Perform functional testing of finished medical device products using both automated and manual valve testing equipment to ensure conformance with design specifications

• Review, follow and perform job functions in compliance with established work instructions and adherence with SOPs, including recording traceable information on device history records and may enter information into JDE.

• Perform verification of manufacturing documents with component and device drawings, which may include Geometric Dimensioning and Tolerancing methodologies

• May control inventory to ensure appropriate storage conditions and movement

• Train colleagues from other sites, including inspection of their work output

• Provide coaching and training to lower level employees and colleagues; Identify and escalate work issues and able to fill-in for Supervisor as needed

• On time arrival to work, regular attendance without excessive absenteeism, and working a full 8 hour or longer work period

• Other incidental duties: General work area housekeeping

#LI-MA1

Qualifications

• High School Diploma or equivalent preferred

• Two (2) years of experience specifically in sewing, GMP, clean room, medical device environment

• Demonstrated ability to lead teams, coach others, and transfer knowledge

• Ability to use all applicable tools and equipment, hand eye coordination, and high manual dexterity

• Full understanding of applicable inspection procedures, including the ability to contribute to and support the development of procedures

• Proficient in all inspection techniques for production inspection

• Ability to provide performance feedback, confirm understanding, and have a positive impact on competency and output of other inspectors

• Ability to clearly describe and convey nonconformance issues, and enter them into QMS (Quality Management System)

• Ability to program and contribute to the validation of automated test equipment

• Strong communication skills and interpersonal relationship skills, including ability to convey training in methodology and procedures

• Ability to serve as a role model to lower level inspectors in proper execution of day-to-day inspection duties as well as guide other workers/colleagues in understanding operations and quality standards

• Strong English language skills, including reading, comprehending, speaking and writing, and strong communication skills

• Proficient computer skills, including strong working knowledge of manufacturing software

• Strict attention to detail

• Adhere to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing

• Must be able to work with minimum supervision

• Work in a Team environment

• Adhere to all EHS rules and requirements and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job ID: RCP20180504-44914

Northrop Grumman - Innovation Systems has an excellent opportunity for a Quality Receiving Inspector at our Plymouth, MN facility.

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.

Northrop Grumman Innovation Systems designs, builds and delivers space, defense and aviation-related systems to customers around the world. Our main products include launch vehicles and related propulsion systems; missile products, subsystems and defense electronics; precision weapons, armament systems and ammunition; satellites and associated space components and services; and advanced aerospace structures.

Responsibilities

• Performs receiving inspection per inspection procedure requirements, verifies supplier compliance with purchase order requirements.

• Performs dimensional inspections using our set-ups, GD&T, and hand-held instruments to measure parts and assemblies to drawing requirement per ANSI-Y14.5. Inspects for proper identity and dimensions using such measuring devices as micrometers, gauges, CMM (Zeiss), calipers, telescope gauges, and optical comparators.

• Inspects purchased parts and materials for conformity to standards, specifications, and processing requirements, including piece parts, circuit cards, sub-assemblies or final assembly hardware, as well as documentation received from Supplier.

• Visually inspects for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits. Makes accept/reject decisions on inspected goods. Maintains records of results.

• Ensures equipment is calibrated and within specifications.

• Interface with local DCMA (customer) representative.

• Participate in internal and external Quality Management System audits.

Requirements

• 4-6 years of experience as a quality inspector in aerospace industry or similar highly regulated environment

• Proficiency with Blue Print reading, Geometric Dimensioning and Tolerancing per ASME Y14.5

• Familiar with quality data / non-conforming material processing systems used to record inspection results

• High school diploma or equivalent, technical degree preferred

• Intermediate PC skills including knowledge of MS Office products, specifically Word & Excel

• Excellent communication skills and ability to work in a team environment

• Familiarity with AS9100 or ISO 9001 Quality Management Systems

The Ideal Candidate Will Possess

• Dimensional inspection use of Zeiss Coordinate Measuring Machine (CMM) to drawing requirements per ANSI-Y14.5, intermediate level.

• Experience performing source inspections at sub-tier suppliers

• Experience working with reduced dimension drawings and/or CAD files

• Familiarity and experience with AS9102 First Article Inspection requirements

• Must be a US Citizen, and have the ability to obtain government security clearance, if necessary

Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO . U.S. Citizenship is required for most positions.

Job Type: Full Time

Desired Travel: less than 25%

Years of Experience: 3-5 Years

Education: High School/GED

Expertise: Operations

Group: Defense

Description

Under supervision by the Receiving Supervisor, the QC Inspector performs in coming inspectionon parts, and springs, raw material, O-ring, gasket etc. prior to stock. The Inspector documents the as foundconditions, measures critical dimensions, and verify by using Drawing /QPD/QWI, Manufactures Instructions and specifications.

Responsibilities

• Inspects and documents as found condition parts,documents the condition and verifies parts or components are within drawings/QPD/QWI and the manufacture specifications etc.

• Documents any non-conforming goods on the NCRreport.

• Move parts in SAP from receiving location (917)to other location after inspection and inspection Log, report etc.

• Must understand and follow pertinent policiesand procedures relative to all assigned duties and responsibilities.

• Must be customer oriented willing to workovertime as required. Understanding this may involve evening and weekend callin, often with very little notice.

• Establishes and maintains acceptable attendancehabits.

• Maintains a clean work area. Perform otherduties as required.

• Practices, promotes and follows company safetystandards.

Requirements

Skill, Experience& Education:

• Attention to detail.

• Education equivalent to High School Diploma orG.E.D.

• Possess good knowledge of industry standards, drawing,inspection tool.

• Must possess a math skill and fraction orinspection method.

• Possess good communications skills.

Working Conditions& Environment:

• Physical tasks include walking, grasping,carrying, lifting, seeing, hand-eye coordination, listening, and writing.

• Mental tasks include reading, interpreting,analyzing, calculating, measuring and communicating.

• Work is performed typically indoors.

• Work which occasionally produces a high level ofmental/visual fatigue, periodically performed under pressure, requiring intensemental application and attention to detail.

• Frequent exposure to one or more unpleasant(noise, heat, dust, etc.) or hazardous conditions 20-50% of work time.

• Long periods of standing and regular bending,twisting, and stretching.

Work Authorization

No calls or agencies please. Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.

Equal Opportunity Employer

Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by calling 1-314-553-2544 (V/TTY/TDD) or by sending an email to idisability.administrator@emerson.com.

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars

Receiving Inspector – Temporary

Responsibilities:

• Utilize inspection equipment such as micrometers, calipers and profilometer

• Approve or reject items and document inspection results as required

• Perform documentation review and verification of certifications, specifications, and conformance to design requirements

• Communicate with internal customers and suppliers to resolve inspection discrepancies

• Use electronic MRP system to route parts and components to proper departments

Position Details:

This is a temporary position with SpaceX, for the length of time as stated, and is subject to change with minimal notice as business needs dictate.

• LENGTH OF POSITION: contract end date is slated for end of Q3 2018 (end of Sept 2018)
• LOCATION: Hawthorne, California
• SHIFT: Day

Basic Qualifications:

• High School diploma or GED
• Minimum 1 year of receiving, precision, mechanical, or metrological inspection experience

Preferred Skills and Experience:

• Forklift and other related inventory equipment experience

• Experience within the aerospace, automotive, semiconductor, or electronic fields

• Experience detecting design and drawing flaws

• Ability to read and interpret engineering drawings and specifications using ASME Y14.5

• Experience with GD&T and use of metrology tools and gauges

• Experience with Microsoft Word, Outlook and Excel

Additional Requirements:

• Ability to lift 30 lbs. unassisted

• Standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are a part of this role

• Ability to work all required shift hours, including overtime and weekends when needed

ITAR Requirements:

• To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status

Applicants wishing to view a copy of SpaceX's Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000

Date: 30-May-2018

Location:Hornell, NY, US

Company: Alstom

The Railway industry today is characterized by both a strong and sustained growth across the world. The trends that drive this are well known: environmental challenges, population growth, urbanization and increasing demands for mobility.

With 6B€ of Sales and around 30,000 employees based in over 60 countries, Alstom develop & market the most complete range of systems, equipment and services offered today in the railway sector. Today we offer our customers solutions that feature a seamless blend of diverse technologies, ensuring optimal interfaces, along with flexible implementation and real synergy in innovation.

Receinving Inspector

Mission & Responsibilities

In Process & Receiving Inspection of Components, Assemblies and Vehicles to established criteria and specifications

• Maintain Inspection Records per Component, Assembly and Vehicle

• Assist Project Quality Manager with Inspection Plan

• Initiate appropriate Quality improvement actions in support of Project's Quality objectives

• Inspect components/assemblies to established criteria and specs

• Identify inspection status on components and assemblies

• Initiate Non-conformance Reports for non-compliant product

• Verification of field modification and/or first article inspection requirements

• Perform Supplier Source Inspection when required

• Maintain Inspection Records, Unit History Documentation, Vehicle History books

• Participate in Customer Joint Inspections

• Experience using micrometers, gauges, calipers, and other precision measuring equipment

• Approve rework, waivers and dispositions

• Identify supplier quality issues for resolution

• Review past inspection data for critical information

• Review receiving/process traveler for pertinent data

• Any and all other responsibilities, in addition to those mentioned above, as assigned by supervisor/manager. Any interpretation/clarification with responsibilities above will be settled by the supervisor/manager

Qualifications / Experience:

• High school completed. 2 year of Associate Degree will be a differential;

• 4 years or more of quality inspection experience within medium/heavy manufacturing industry, rail experience will be a differential as well

• English Fluent

Computer Skills:

• Knowledge of a variety of computer software applications

• Microsoft Excel & Word a must

• ERP knowledge a plus

Behavior and Personal Attributes:

• Work autonomously with little / no direct supervision

Operate in a transparent manager, encouraging cross-departmental interaction to ensure Project success

• Speak with data based on fact not assumptions

• Rigor and Discipline, ability to say no with the necessary supporting data

Environment:

• Manufacturing ~ 80%
• Office conditions ~ 10%
• Travel ~ 10%

Alstom is an Equal Opportunity and Affirmative Action Employer of Women and Minorities.

Alstom is an Equal Opportunity and Affirmative Action Employer of Protected Veterans and Individuals with Disabilities.

Alstom is a drug-free workplace.

Nearest Major Market: Corning

Job Segment: Shipping and Receiving, ERP, Operations, Technology

About Dexcom:

Founded in 1999, Dexcom, Inc. provides continuous glucose monitoring technology to help patients and their clinicians better manage diabetes. Since our inception, we have focused on better outcomes for patients, caregivers, and clinicians by delivering solutions for people with diabetes - while empowering our community to take control of diabetes.

Summary:

The incumbent is responsible for performing a variety of work functions that include performing inspection and testing of raw materials, component piece parts, and finished goods received from suppliers, in accordance with documented specifications and procedures. Develops inspection procedures and prepares accurate documentation of inspection results. Incumbent is proficient with optical inspection of mechanical parts as well as workmanship inspection of electronic PCBAs, printed artwork and literature. Provides ongoing support of formal supplier quality systems and assistance with investigations of nonconforming material. Interfaces with manufacturing and engineering personnel and works in a team oriented environment. Maintains a positive attitude while working in a fast-paced manufacturing environment and dealing with shifting priorities.

Essential Duties and Responsibilities:

• Responsible for material flow, storage of parts, and accurate inventory transactions within the MRP system.

• Performs first article inspections and supplies data to engineering. Assists in the development of inspection procedures

• Identifies problems, and proposes resolutions that are timely, cost-effective, and meet quality requirements.

• Responsible for accurately recording inspection results and maintaining good documentation practices.

• Responsible for visual and/or dimensional QC inspection and/or testing of incoming quarantined materials, inspection of in-process materials, labeling, and final commercial product.

• Performs and understands geometric tolerance, inspection of electronic assemblies, and acceptance sampling plans.

• Must be able to distinguish between certain colors and pass an annual color vision test

• Reads and understands specifications and inspection criteria and applies criteria using appropriate and properly configured inspection tools. Reads and understands schematics and mechanical drawings.

• Applies proficient computer skills in the use of Microsoft Office and database applications such as Oracle and SolidWorks.

• Works and communicates effectively and professionally with others.

• Assumes and performs other duties as assigned.

Required Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education Requirements:

High school diploma or general education degree (GED) and six months work experience as a QC Inspector, or equivalent combination of education and related manufacturing and/or QC experience.

An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Talent Acquisition at talentacquisition@dexcom.com.

To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Dexcom. Only authorized staffing and recruiting agencies may use this site or to submit profiles, applications or resumes on specific requisitions. Dexcom does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to the Talent Acquisition team, Dexcom employees or any other company location. Dexcom is not responsible for any fees related to unsolicited resumes/applications.