Inspector Shells Job Description Sample
FAI Inspector (First Article Inspection)
Req ID: 41488
First Article Inspector (FAI Inspector)
Inspector needed to perform and complete First Article Inspections (FAI) and related documentation (FAIRs). Candidate must be well-versed in performing FAI from creation to completion in accordance with AS9102. AS9102 proficiency is required. Reading/understanding drawings is required (GD&T). Proficiency in basic measurement tools (calipers, height gages, flat tables, etc.) required. CMM (Coordinate Measurement Machine) experience strongly preferred. SAP experience preferred. NetInspect and DISCUS software experience is preferred. Inspector must also have excellent communication and teamwork skills and be able to thrive independently and/or as part of a team.
Create First Article Inspection Reports (FAIRs) in accordance with AS9102 standard
Use measuring tools (microscope, basic hand tools, CMM, optical comparator, etc.) to measure part features to the required precision
Conduct in-process and final inspections to ensure conformance to all specifications
Interpret Mechanical Drawings and/or Source Control Documents, parts list, and associated documents for inspection requirements
Retrieve and/or create certificate of compliance, manage material test reports, outside process certifications, etc. as necessary
Follow inspection plans to verify acceptance or rejection of electronic parts and materials
Correctly handle ESDS parts when inspecting
Create non-conformance and corrective action reports when necessary
Perform other job related duties as assigned
Experience in completion of First Article Inspections in accordance with AS9102 is required (3+ years preferred)
Proficiency in usage of basic measuring tools (microscope, basic hand tools such as calipers, height gages, snap gages, etc.,) is required. CMM or optical comparator proficiency preferred.
Ability to read/interpret drawings (GD&T) required.
Understanding of inspection methods and techniques.
Ability to read BOM lists
Basic knowledge of MS Office Software. Proficiency in MS Excel and Word preferred.
NetInspect software experience preferred.
DISCUS software experience preferred.
Excellent communication and computer skills
Strong written and verbal communication skills
Committed to getting the work completed on time with high attention to detail
Team player, positive attitude, ability to multi-task, stay calm under pressure and adapt to dynamic situations
High School diploma or GED / equivalent
Ability to work overtime as needed
Applicant must be fully authorized to work in the US without sponsorship
Equal Employment Opportunity: Celestica's policy on equal employment opportunity prohibits discrimination based on race, color, creed, religion, national origin, gender, sexual orientation, gender identity, age, marital status, veteran or disability status, or other characteristics protected by law.
This policy applies to hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral and other aspects of employment and also states that retaliation against a person who files a charge of discrimination, participates in a discrimination proceeding, or otherwise opposes an unlawful employment practice will not be tolerated. All information will be kept confidential according to EEO guidelines
Nearest Major Market: Tucson
Job Segment: Inspection, Inspector, ERP, SAP, Testing, Engineering, Quality, Technology
Position will assist the Lynchburg District Bridge Safety Inspection Program in both the office and field. Duties will include data input and maintenance of database systems for BrM, QA inspections, consultant negotiations, and ancillary structures for consultants, municipalities and/or VDOT, as well as the use of SharePoint for data sharing and transfer.
Position will assist with the completion of safety inspection reports, drafting channel profiles and other sketches in Visio, pulling structure information for negotiations, and maintaining files according to record retention policies. Position will assist with in-depth visual and mechanical inspections of bridges and highway structures to discover deterioration, damage and defects that would affect the life, serviceability and safety of the structure. Position will provide program and administrative support to the work unit, e.g. travel, SPCC purchases, etc.
Additional positions may be filled from this recruitment. VDOT employees have Shared Values and a Code of Ethics. http://www.virginiadot.org/about/missionandvalues.asp We encourage all those who apply to review these values and ethics. If you share our values, we invite you to apply.
Your success in our organization depends upon sharing these values and keeping this Code of Ethics. In addition to a rewarding work experience, VDOT offers excellent benefits including competitive health and life insurance programs, pre-tax spending accounts, state funded Short and Long Term Disability Program, a state retirement plan with options for tax-deferred retirement savings including employer matching,. Miscellaneous benefits include paid holidays, tuition assistance, wellness programs, etc. Click Here for additional information.
Knowledge of bridge maintenance and repair procedures, inspection methods, and common bridge types and components. Ability to diagnose causes of damage and deterioration to structures.
Ability to read and interpret bridge and structure plans and specifications. Ability to use specialized inspection instruments and tools. Ability to prepare and/or draft structural drawings and sketches.
Ability to communicate effectively orally and in writing and to follow safety practices & procedures. Skill in mathematics, as well as in the use of computers and software applications. Experience preparing automated reports, entering data and maintaining databases and files.
Experience in bridge maintenance/repair or structural inspection. Completion of an FHWA-approved course in safety inspection of in-service bridges.
Proficiency in the use of MS Office products and CAD. Associate's degree or coursework in engineering or engineering technology.
Valid driver's license and safety footwear required. Ability to work in diverse conditions to include working at heights, over and in water, and exposure to insects and animals, as well as working in confined spaces, close proximity to heavy traffic, and inclement weather.
Ability to perform heavy manual labor to include standing, bending, climbing and lifting up to 50 lbs. Must be able to complete First Aid, CPR, work zone safety and flagger certifications. Must be able to obtain a valid CDL and DOT medical card within 6 months of employment and maintain thereafter.
Fingerprint-based criminal history record check, references, work history and DMV driving record will be verified prior to employment. Selected applicant must pass a pre-employment physical and drug screen. Will be required to work outside normal hours in emergencies and inclement weather to include nights, weekends and holidays.
Construction Inspector I
SAM, LLC is currently seeking a Construction Inspector I. The candidate will be involved with management and construction oversight associated with projects in South Carolina working directly with the SCDOT Project Manager. These projects include construction management associated with maintenance, rehabilitation, and reconstruction of existing projects for SCDOT and other local governmental agencies.
Duties & Responsibilities
The ideal applicant will have an understanding of construction manuals, standards and specifications, and general construction practices associated with SCDOT projects. This position entails both field and office assignments along with limited travel outside of the area.
Under the review and direction of Project Manager, perform field inspection and oversight of construction activities
Maintain daily reports of inspection work along with detail records of project progress
Must possess good interpersonal and communication skills
Able to read and interpret plans, specifications and applicable standards
Review Contract documents to verify compliance with governmental regulations and conformance with project requirements
Assist with coordinating materials sampling and testing and verifying sufficient testing has been performed
Verify accuracy of payment requests and invoicing for completed work
Experienced with SCDOT construction inspection and procedures
Ability to coordinate with contractors' staff and effectively communicate with all parties
Performs standard mathematical calculations
Able and willing to work day or night shifts and/or flexible schedules as required to support the project requirements
Able to attend preconstruction meetings, project progress meetings, etc.
Ability to lift 50lbs
Additional projects as assigned
Required Experience - Education and Skills
Experience in Construction Inspection services for transportation project as described below is preferred. Direct field experience as a Contractor or materials-testing technician can substitute for Construction Inspection experience on a case-by-case basis.
High School Diploma or GED
0-4 years of experience
Highly motivated and works well with minimal supervision
Familiar with civil/transportation plans and specifications
Familiarity with SiteManager software is preferred, but not required
Field testing certifications through SCDOT and/or ACI is preferred, but not required
A strong mission, vision and values culture is what drives SAM Family of Companies' success. Our Core Values: Integrity & Ethics, People, Excellence in Service, Safety and Community defines who we are. We are looking for talented people who embody these values to join our organization.
We offer a best in class benefits package that includes company paid premiums for medical, vision, dental and life insurance. SAM provides a VERY generous 401 (k) plan, 401 (k) profit sharing AND performance-based bonuses. Come join our team of professionals that are leading the way for the surveying industry!
SAM is an EOE/Affirmative Action Employer M/F/D/V. If you are interested in applying for employment with SAM and need special assistance to apply for a posted position, please contact (512) 685-3556 to leave a message or send an e-mail to firstname.lastname@example.org. SAM is not seeking nor intends to consider neither unsolicited resumes nor other information on job candidates from third parties, such as recruiters, placement agencies, etc. If, despite this notification, a third party decides to submit a candidate's resume or other information to SAM and SAM chooses to hire such a candidate, SAM has no obligation and expressly disclaims any liability to provide any remuneration or compensation for the hiring of such candidate. SAM participates in the federal E-Verify Program.
Examines areas of the mine or surface to maintain a safe work environment.
Confers with management representatives to advise of hazards.
Participates in the investigation and review of all serious accidents, disabling injuries, fatalities and major disasters.
Maintains an effective safety program and rapport with safety representatives from government agencies and other organizations.
Conducts mine inspections and accident investigations.
Provides recommendations to prevent unsafe or hazardous conditions from recurring.
Maintains a violation log and report file.
Conducts dust sampling and noise level readings.
Maintains appropriate results data.
Maintains a working knowledge of safety codes, laws and regulations.
Provides first aid and ambulance service for injured mine personnel.
Inspects first aid stations, supplies, and equipment.
Restocks as necessary.
Suggests proper personal protective devices for the employees.
Maintains and controls SCSRs on mantrips as well as other vehicles and storage stations. Conducts 90 day inspections.
Conducts MSHA required noise surveys. Submits MSHA required reports and health standards compliance notification.
Calibrates safety testing instruments and maintains records.
Updates task training and annual refresher training files.
Hazard trains visitors, contractors, vendors, or other company personnel before they enter the mine.
Travels with Federal and State mine inspectors throughout the mine, documenting findings and reporting them to Mine Management.
Records citations issued and date due for abatement.
Faxes copy of citations to corporate safety.
High School Diploma with specialized training or equivalent is required.
A minimum of 2+ years of related experience in mine operations, electrical or safety experience is preferred.
Requires thorough knowledge of coal mining operations; including safety, welding and fabrication, production, maintenance, economics, equipment usage and staff utilization.
May require MSHA Instructor, Underground Mine Foreman, Fireboss, First Aid and Dust and Noise Sampling certifications.
Must possess effective verbal communication skills.
Must possess basic computer skills.
Associates Degree in Industrial Health and Safety is preferred.
Murray Energy Corporation is an equal opportunity employer with competitive compensation and excellent benefits. Those individuals searching for a challenging and rewarding opportunity should apply.
Sea Ray - Parts Inspector
It is our people behind life's passions who will make the big difference. If you are interested in becoming part of a company that delivers market leading products, driving your own career and working with brands committed to active lifestyles, then you've found your fit.
Have what it takes? Join us.
Parts Inspector / Finish Repair Technician will perform a wide variety of fiberglass lamination tasks in a large boat manufacturing facility. Lamination tasks performed may include parts inspection, finishing, gel coating, gun running and some bracing.
DUTIES AND RESPONSIBILITIES
Inspects the exterior of the boat to ensure a quality final finish (at the conclusion of the lamination process and also after assembly).
Inspects and repairs glasswork, works gigs and performs minor disassembly and assembly of boat parts.
Assists in controlling material usage in designated area.
High School Education or GED equivalent
Fiberglass finish or auto body repair experience
Ability to audit departmental work areas
Ability to get department inspection and buy-offs
Ability to read and understand Job Descriptions
Hand tool knowledge
Knowledge of hazardous chemical handling and disposal
Working knowledge of procedures, instructions, and documents as it relates to the quality system
Must possess the desire and ambition to work safely at all times and report all hazards to their Supervisor immediately
Must understand basic terminology such as OSHA, DEP, and other regulatory agencies
Must be able to wear required personal protective equipment where designated, including but not limited to: safety glasses, hearing protection, gloves, etc.
Must be able to understand and complete the OSHA questionnaire, pass spirometer test and physically wear a respirator where required
Must be able to physically perform the requirements of the job, including lifting, bending, climbing, standing, etc. with or without reasonable accommodation.
Must be able to understand all safety related document and worksite rules and practices, equipment operating instructions, documented safety management systems, and health and safety requirements, including the General Safety Rules and Individual Safety Commitment.
We are the people behind life's passions.
Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: email@example.com or 1-888-735-4767.
Equal Opportunity Employer: Minorities/Women/Protected Veterans/Disabled
EEO is The Law - click here for more information
Brunswick and Workday Privacy Policies
Quality Inspector I - Bothell WA -Hiring Immediately
To be considered for this role you must provide your resume. If no resume is uploaded your application is not complete. To upload a resume click "View Profile" upper right corner. Edit profile. Upload resume under "documents."
Work Shift: Monday
About Panasonic Avionics
For over 35 years, Panasonic Avionics Corporation has led the industry in design and implementation of breakthrough In-Flight Entertainment solutions that connect the business and pleasure of flying.
Our Quality Department:
Does not manufacture onsite but receives, inspects and distributes supplies from over 100 internal and external partners around the globe. The mix of product changes daily with no two days ever the same. Inspects both machine shop parts and electronics/electrical equipment. This position will determine and enforce quality and reliability requirements in accordance with contracts, engineering specifications, and established procedures.
- AA degree in Electronics, or an equivalent combination of technical education, training and experience. (i.e. Technical School Apprenticeship or Electronics Certificate or Military Electronics Experience)
- Previous experience in Quality Control/Inspection setting. Aviation Industry experience preferred.
Perform all product inspections and tests in accordance with established quality standards, inspection plans, and test procedures. Provide inputs to Engineering that will continuously improve the effectiveness and utility of inspection and test plans.
Assure adequate calibration status for all measurement equipment and conformance with the company's preventive maintenance program.
Inspect items to be shipped for completeness, proper identification and paperwork, and required packaging.
Maintain records of inspections and product acceptance performance.
Create summary reports as required for management use.
Proficiency with electrical/mechanical test equipment.
Understand the responsibility of working within an ISO 9001 managed and FAA regulated manufacturing environment.
Proficient with PC (MS office, etc...)
Basic level problem solving is required to make the determination regarding product compliance with regards to specifications, industry standards, and FAA requirements.
Ability to interact with diverse personalities highly desired.
Ability to manage numerous detailed projects under a great deal of stress.
Excellent communication skills required.
- AA degree in Electronics, or an equivalent combination of technical education, training and experience. (i.e. Technical School Apprenticeship or Electronics Certificate or Military Electronics Experience)
- 3 years Quality Control/Inspection experience. Aviation Industry experience preferred.
- Travel is required to support collection of field quality data and support of Installation First Article Inspections at airframe manufacturers, seat suppliers, and subcontractors. 5-10% of time.
This role will not provide applicants with sponsorship employment benefits or work visas.
Panasonic is proud to be an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, and any other characteristic protected by law or company policy. All qualified individuals are required to perform the essential functions of the job with or without reasonable accommodation. Pre-employment drug testing is required for safety-sensitive positions or as may otherwise be required by contract or law. Due to the high volume of responses, we will only be able to respond to candidates of interest. All candidates must have valid authorization to work in the U.S. Thank you for your interest in Panasonic Corporation of North America.
Location/Division:Bothell, WA, USAJob Requisition:JH3399
Cinti Service Ndt Inspector - Level II Immersion Ultrasonic Inspector
Cinti Service Ndt Inspector - Level II Immersion Ultrasonic Inspector
Posted 1/10/2019 10:55:18 AM
Job Function: Manufacturing
Business Segment: Aviation Supply Chain
Location(s): United States; Ohio; Springdale, Cincinnati
NDT Ultrasonic Level II Immersion. Perform NDT testing on Aviation Aircraft components at GE Aviation's Aviation Component Service Center.
Perform all required inspections, tests, and evaluations in immersion ultrasonics. Ensure all equipment, personnel, and planning is maintained in a condition of proficient operation and quality compliance. Create and maintain techniques, planning, scan plans, programming, equipment, supplies, and software quality assurance as necessary. Provide classroom and on-the-job training of inspectors when designated by Level 3 certifying agent to do so. Acquire and maintain skills as well as certification capability in U.T to accomplish production and quality requirements to support ACSC production needs. Perform related duties as assigned.
Retain the certification or provide documentation of past certification as described in QCWI AC-179 to perform as a certified inspector in the appropriate discipline listed below.
Level 2 in Ultrasonics
Pass the eye test requirements per NAS410.
Experience in using basic hand tools and setting up equipment, fixtures and parts for inspection including sound material and chemical handling practices, performing basic machine preventative maintenance, and performing calibration of equipment to known standards.
Multiple Certifications held in NDT
Technical or Vocational degree in NDT
Experience in CNC or NC equipment
Proficient in the use of shop math (addition, subtraction, multiplication, and division and use of fractions and decimals) with the ability to learn and apply trigonometry and geometry.
Possess understanding of repair process and service induced discontinuities related to aviation hardware overhauled or repaired.
Experience in computing skills and performing basic CNC programming of equipment used for inspections
Experienced in the use basic shop mechanical measurement equipment (mic's, verniers, dial indicators, length scales.).
Must be capable of identifying and obtaining materials needed for performance of work in assigned area.
GE is the world's Digital Industrial Company, transforming industry with software-defined machines and solutions that are connected, responsive and predictive. Through our people, leadership development, services, technology and scale, GE delivers better outcomes for global customers by speaking the language of industry.
GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
Locations: United States; Ohio; Springdale, Cincinnati
GE will only employ those who are legally authorized to work in the United States for this opening.
Quality Assurance Inspector
A Quality Inspector communicates deviations from quality specifications, control limits, and other requirements, as well as trends approaching deviation to fellow employees in the respective production areas, including supervisors and managers as needed, in a timely and effective manner so that corrective action can be implemented.
A Quality Inspector has the discretion and is empowered to require correction, place materials on hold or release them from hold, determine materials to be scrapped, and stop a process partially or in whole.
- Collect shots and samples from the production floor.
- Perform variable inspections that provide metrology data such as size, weight, thickness, or opacity.
- Perform attribute inspections comparing to established standards that note the presence or absence of a physical, visual, or functional characteristic or defect. Examples of these attributes include holes in product, deformation, contamination, and damage.
- Sign-off new jobs after changeovers.
- Perform variable inspections that provide measurement data such as surface pretreatment levels and calorimetry.
- Perform attribute inspections comparing to established standards that note the presence or absence of a physical, visual, or functional characteristic or defect. Examples of these attributes include ink color and density, image accuracy, proper pretreatment and cure, and proper packaging. Attributes from the molding process are reassessed at this point as well.
- Assist with setting standards and creating visual reference guides.
- Make rounds on the production floor, observing and inspecting product quality, process capability, and conformance to all applicable requirements, including safety, food safety, quality, and good manufacturing practices.
- Record the results of inspection and observation activities into the appropriate computer or paper-based forms and systems.
- Identify quality concerns from observations, inspections, and review of collected data.
- Communicate quality concerns, including potential non-conformities, deviations from standards, specifications and control limits based on variable and attribute inspection, as well as general inspection and observation activities to the appropriate operators for awareness and technical personnel for resolution.
- Identification of the scope; start and stop; of the concern.
- Placing materials on real or virtual hold in the appropriate system.
- Dispositioning nonconforming materials in an expedient and timely manner when possible.
- Communicating the action to the appropriate personnel.
- Documenting the actions.
- Interrupt production if product quality is unacceptable based on established standards and cannot be adequately managed through containment or disposition activities.
- Complete reports and documentation in a timely and accurate manner, including quality assurance notifications, rework logs, end-of-shift reports.
- Communicate concerns, issues, and activities with coworkers, supervision and management within and across shifts to ensure visibility and acknowledgment of those concerns, issues, and activities.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee must demonstrate the ability to work independently, with minimal supervision
- Ability to read and comprehend documents such as safety rules, operating instructions and procedure manuals.
- Ability to write routine reports or correspondence.
- Ability to effectively present information in in one-to-one or small group situations including with customers, third party visitors, and other employees of the organization.
- Demonstrable team skills including problem solving and managing conflict preferred.
- Perform arithmetic. Ability to add, subtract multiply and divide.
- Understand and utilize decimals.
- Basic computer skills including email, word processing, simple spreadsheets, and use of electronic forms.
- Reasoning Ability:
- Ability to define problems, collects data, establish facts and draw valid conclusions.
- Ability to interpret an extensive variety of technical instructions in word, mathematical, or diagram form.
- Deal with several abstract and concrete variables.
- High school diploma or GED equivalent.
- One or more years working in a quality related position preferred.
- One or more years working in a molding or printing position preferred.
Senior Quality Inspector 1St Shift Plant 200
TrinityRail is searching for a Senior Quality Inspector in our Longview, TX office.
Makes visual and measured inspection of products to ensure conformance with standards and determines if product meets all requirements. May inspect incoming materials or plates, outgoing materials, or fittings and welds throughout the manufacturing process.
May apply singular inspection process, such as hydrostatic tests. May perform x-ray, destructive or nondestructive examination to verify specified dimension, strengths and other quality factors using measuring instruments and inspection equipment. May also perform magnetic particle inspection.
Completes inspection records and reports. Familiar with appropriate codes and regulations. Follows all safety rules and practices.
May be involved in safety committees or initiatives. Performs other duties as assigned.
Performs at Level 2 and
Proficiently utilizes inspection tools and measuring equipment
Understands and applies quality science and tools
May be Welding Inspector Specialist (WIS) level II or Quality Inspection Specialist (QIS) level II or able to achieve in 6 months
Certified to conduct and approve 2 NDE quality tests (such as bubble leak, dye penetrant, ultrasound) or Certified Weld Inspector (CWI)
Must be able to work nights
Michigan Department Of Health And Human Services Office Of Inspector General Intern
With questions or for more information about the State of Michigan Internship Program, please visit:
State of Michigan Internship Program Overview
- Currently Accepting Applications For Summer 2019 Semester*
The Michigan Department of Health and Human Services (MDHHS) will protect, preserve, and promote the health and safety of the people of Michigan, with particular attention to providing for the needs of vulnerable and underserved populations. MDHHS is one of the largest of the executive branch departments. MDHHS is responsible for health policy and management of the state's health, mental health, and substance use care systems. For more information, visit: www.michigan.gov/mdch.
The Michigan Department of Health and Human Services Office of Inspector General is seeking an intern to work beginning the Summer 2019 semester (May through August 2019).
The intern responsibilities and projects may include learning from Agents and Analysts, and assisting with the following:
Research, identify and determine if recipients, business entities or Medicaid providers fraudulently received (or were issued) entitlement program funds administered by the MDHHS
Accompany and assist Agents and Analysts who are conducting field investigations or audit vendor oversight activities
Prepare for and attend Administrative, Felony Court and/or Appeal proceedings
Perform data analysis and/or utilize available data and other information to support fraud allegations
Use various forms of communication between State departments and agencies to resolve fraud allegations for recovery of misspent program funds
Required Education and Experience
Internship is open to current junior or senior Undergraduates with a major in a Health Profession, Criminal Justice, and/or Accounting/Auditing.
Preference will be given to Criminal Justice majors!
Additional Requirements and Information
Please attach a cover letter, current resume and official transcripts. Your cover letter must include answers to the following questions:
What qualities or attributes will you bring to the MDHHS Office of Inspector General?
What are your career interests, goals and plans? Please be specific.
What do you expect to gain from this internship experience?
Please specify your interest in one or both of the following disciplines:
A. Medicaid Provider Investigations
B. Public Assistance Recipient Investigations
Please click on the link to download a Michigan State Police Criminal Background Authorization Form. Once you complete the form please upload the form to the attachment section of your application along with your resume, cover letter and college transcripts. This form will be required to be considered for an interview. Please click on the link to the form located on the job posting. If you have questions regarding this form, please call (517) 284-0100.
Candidates will also be subject to a MDHHS background check.
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!