Inspector Typewriter Assembly And Parts Job Description Sample
Inspector Assembly & Install B
(Internal applicants must apply through the ERT process.) An inspector in this position performs sub assembly/final assembly inspection for workmanship, fit, alignment and conformance with applicable drawings, specifications, quality standards and manufacturing plans. Inspector witnesses processes and performs shakedown inspections of completed sub-assemblies/final assemblies or major components.
Inspectors check the work instruction for the next job or in process inspection and obtain the applicable drawings, specifications and any other necessary documents. Review work instructions for completeness.
Perform in-process inspections and audit manufacturing processes (e.g., hole check, torque, seal squeeze out, cold work, electrical bonding and finishes) as required. Review the completed job and inspect workmanship, dimensions and locations (e.g., hole size and fasteners) and ensure all parts/assemblies have been installed per the current drawings, specifications and planning requirements. Inspect electrical assemblies (e.g., installation, crimping, termination and routing), as required.
Operate mechanical lifts of various types, to inspect parts/assemblies, as required. Identify and document discrepancies and report to shop as necessary.
Reject assembly or installation, as required. Note discrepant condition(s) and location(s) and what the correct configuration of the assembly or installation should be, citing drawing, specification, or plan requirements. Process quality records per appropriate procedures to maintain accountability, acceptance, and status.
Initiate re-inspection to investigate whether rejectable conditions exist on other airplanes and/or parts/assemblies, as required. Maintain personal and tool certifications, as required.
Assist other employees with functions, methods and procedures by passing on information and answering questions. Contact team leader/supervisor when assistance is needed.
Consult with management and/or others (e.g., production, engineering, planning or customer coordinator) on process or job related issues as required. Work with others as part of a team including giving and receiving feedback, assisting others in completion of tasks, provide on-the-job-training to others.
Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians.
Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
Manufacturing Safety & Quality
Relocation Assistance Available
Yes. Available for eligible candidates, if authorized.
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
English comprehension required Frequent (3-6 hrs) exposure to noise. Handle, use and dispose of hazardous materials.
Must be able to obtain and maintain personnel certifications as required to support job responsibilities. Must pass visual acuity and color perception tests. Occasional contact with Metals, exposure to plastics and solvents and exposure to Atmospheric Conditions.
This is an hourly position governed by the IAM Collective Bargaining agreement. This position requires occasional (1-3 Hrs) Finger manipulation, Flexion/Extension, Handling, Lifting less than 25 pounds, Rotation of head/neck, Sitting, Standing, and Walking. Use of personal protective equipment for face/eyes and ears may be required.
5 years aerospace manufacturing with 2 years of quality experience preferred. ASQ certification preferred. High school diploma or equivalent.
This position must meet Export Control compliance requirements, therefore a United States Person as defined by 22C.F.R. §120.15? "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.
Contingent Upon Program Award
Final Assembly Inspector 3 - Fuels
Are you interested in the opportunity to work for an industry-leading company whose work with cutting-edge technology is driven by something human: the lives our technology protects? If so, Northrop Grumman may be the place for you. It's not the systems that drive us: it's the soldier our systems bring home. It's not just the equipment that motivates us: it's the people our equipment protects. It's not the innovation that gets us up in the morning: it's whom those innovations serve. We're united by our work to help people and protect the world. And that mission makes our team even stronger.
When you join Northrop Grumman, you'll have the opportunity to connect with coworkers in an environment that's uniquely caring, diverse, and respectful. Employees share experiences, insights, perspectives, and creative solutions with some of the best minds in the industry. We collaborate through integrated product teams, cross-functional teams, and employee resource groups, while thriving through the support of training and development, mentors and every day coaching, along with extensive health and work/life benefits. We're committed to our employees' professional and personal development and success.
Northrop Grumman recruits top talent with traditional and non-traditional backgrounds in order to ensure our team is united, connected, skilled, focused and innovative. An inclusive workplace of people with diverse backgrounds, experiences, and perspectives is the key to our performance. At Northrop Grumman, we want our employees to bring their whole self to work. All your different sides are welcome here, as we believe they make our team, our products and our services, that much better.
Inspect equipment and parts for operation and conformance to government and company standards and specifications. Inspects the installation and operation of electrical, electronic, hydraulic, pneumatic, fuel, oil, and emergency systems and other parts and equipment of aircraft. Perform inspection functions of fuel cells and assembly, and installation of components such as fuel lines, hardware, and fittings. Analyze various aircraft fuel tank sealing, inspect internal tank structural, using drawings and other ref, data, to detect seal level deficiencies. Diagnose results of leak test to detect defects, using drawings and other ref, data, for structural and assembly sealing errors. Inspect operation of aircraft fuel systems and related components. Verify appropriate pressure test equipment is utilized. Assist and train other inspectors as required on fuel system activity. Maintain schedules and quality. Perform Quality Accountability duties associated with the processing, verification, and quality auditing and inspection of assemblies, parts, and tooling for which the individual has been delegated production accountability. Validate work areas are clean and orderly. Will be required to perform other inspection duties, as assigned.
High School Diploma or equivalent (GED) and at least 4 years inspection experience in the following: inspecting structure, fuel systems, electrical systems, wiring, flight control system operation, rigging, Flight Line Operations
Ability to enter confined spaces
Must be able to obtain a DoD Secret Clearance with ability to maintain
Ability to relay and receive information
Able to follow basic instructions and guidelines
Ability to pay continuous attention to detailed operations
Ability to apply diversification to approach a fairly routine processes
Able to understand sequence of operations or actions to be taken
Ability to understand and follow basic instructions and guidelines
Ability to move objects from one location to another
Able to perform work in an approved environment during specified work
Ability to change physical locations based upon need
Ability to be subject to both external and internal environmental conditions
Ability to communicate over ambient noise level
Ability to be subject to a variety of physical and atmospheric conditions
Able to wear respirator or other safety gear
Able to be subject to areas which could cause various phobias due to height or closed spaces
Able to operate motor vehicles or heavy equipment
Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit www.northropgrumman.com/EEO. U.S. Citizenship is required for most positions.
It is our people behind life's passions who will make the big difference. If you are interested in becoming part of a company that delivers market leading products, driving your own career and working with brands committed to active lifestyles, then you've found your fit.
Have what it takes? Join us.
Parts Inspector / Finish Repair Technician will perform a wide variety of fiberglass lamination tasks in a large boat manufacturing facility. Lamination tasks performed may include parts inspection, finishing, gel coating, gun running and some bracing.
DUTIES AND RESPONSIBILITIES
Inspects the exterior of the boat to ensure a quality final finish (at the conclusion of the lamination process and also after assembly).
Inspects and repairs glasswork, works gigs and performs minor disassembly and assembly of boat parts.
Assists in controlling material usage in designated area.
High School Education or GED equivalent
Fiberglass finish or auto body repair experience
Ability to audit departmental work areas
Ability to get department inspection and buy-offs
Ability to read and understand Job Descriptions
Hand tool knowledge
Knowledge of hazardous chemical handling and disposal
Working knowledge of procedures, instructions, and documents as it relates to the quality system
Must possess the desire and ambition to work safely at all times and report all hazards to their Supervisor immediately
Must understand basic terminology such as OSHA, DEP, and other regulatory agencies
Must be able to wear required personal protective equipment where designated, including but not limited to: safety glasses, hearing protection, gloves, etc.
Must be able to understand and complete the OSHA questionnaire, pass spirometer test and physically wear a respirator where required
Must be able to physically perform the requirements of the job, including lifting, bending, climbing, standing, etc. with or without reasonable accommodation.
Must be able to understand all safety related document and worksite rules and practices, equipment operating instructions, documented safety management systems, and health and safety requirements, including the General Safety Rules and Individual Safety Commitment.
We are the people behind life's passions.
Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: email@example.com or 1-888-735-4767.
Equal Opportunity Employer: Minorities/Women/Protected Veterans/Disabled
EEO is The Law - click here for more information
Brunswick and Workday Privacy Policies
Final Assembly Inspector 3
At Northrop Grumman, our employees have incredible opportunities to work or revolutionary systems in air and space that impact people's lives around the world today, and for generations to come. Our work preserves freedom and democracy, and advances human discovery and our understanding of the universe. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have a lot of fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history.
Northrop Grumman Aerospace Systems (NGAS) is looking for a Final Assembly Inspector 3 to support the F-35 Delivery Inspection located in Palmdale, CA facility.
Visually and physically inspect aircraft center fuselage structure, system and electrical installations for conformance to engineering requirements using a variety of precision measurement equipment and inspection tools to include
micrometers, calipers, ball gages, flashlights, mirrors, ohm meters, laser gauges and depth gages.
Structure inspections include location, gap verification, shim installation, hole drilling, fastener installation, sealing and coatings.
System installations include tube, hose, valve, fastener installation, sealing and coatings common to hydraulic, pneumatic and fuel systems.
Electrical installations include route, clamping, string tie, connector mating, pin insertion, crimping and coatings.
Locate, identify and accurately document nonconforming product/material at time of discovery per applicable procedures.
Visually and physically inspect rework and repair for compliance per engineering requirements.
Mentor technicians on nonconforming product/material discovered during inspection to include engineering requirements,
how to identify the nonconformance and process improvement.
Develop, promote, and maintain collaborative team environment with fellow inspectors, support organizations and customers.
Work well as part of a team and individually to increase quality, efficiency, effectiveness and affordability through process improvement and other quality control methods.
Must be able to pass formal classroom training to include but not limited to hole drilling, sealing, countersinking, and fastener installation.
Must be able to certify for half and full face respirator
Maintains necessary inspection logs and writes inspection reports.
High school diploma plus 5 years relevant inspection work experience.
Must be willing to work any shift, overtime or non-standard work schedule.
Must be able to work around composites, epoxies, and sealants for long periods of time.
Must be technically proficient in Microsoft Office Suite to include but not limited to Word, Excel, Power Point and Outlook.
Must be able to perform moderately strenuous physical and repetitious work to include climbing, bending, crawling, stooping, and kneeling, lifting, working with arms overhead, leaning and laying.
Must be able Lift, grip, push, pull and hold 25 pounds.
Must be able to work in and around Confined spaces to include but not limited to fuel tanks and ducts.
Must be able to push and pull own body weight to enter and exit confined spaces.
4 years of aircraft structures, systems or electrical experience.
3 years of aircraft quality experience.
Active secret security clearance.
Must be able to effectively communicate both verbally and written.
Assembly Mechanic II
Responsibilities and Accountabilities:
Safely assemble and test BOPs, Packer Stripper, Risers and other pressure control equipment according to blueprints, engineering specifications and customer requirements.
Visually check individual parts to ensure no damage or defects are present and alert QC if they are found.
Ensure assembled equipment operates as designed
Trouble shoot equipment when leaks are detected
Complete ECRs when engineering discrepancies are found including issues with the BOM.
Accurately complete all required paper work including tracing all parts used in assemblies, completing all required paper work and signing off completed test procedures.
Maintain a professional attitude when working with or around customers.
Maintain a clean and safe work area.
Participate in safety programs and continuous improvement efforts.
Meet and maintain production schedules.
Perform other duties as required from supervision.
Key Skills and Competencies:
Must be able to read and interpret drawings, procedures and specifications.
Must possess two (2) or more years general mechanical and/or assembly experience.
Hydrostatic testing experience is a plus. Mechanical problem-solving ability and troubleshooting skills a must.
Must be able to read and interpret drawings, procedures and specifications.
Must possess a basic understanding of hydraulic systems.
Must competent in the use of basic hand tools and other tools such as torque wrenches, impact guns and hydraulic torque machines and air tools.
Must be able to lift 60 pounds.
Must be able to safely drive and operate a forklift.
Must be able to safely operate a crane.
Must possess basic computer skills.
Must be able to follow written and oral instructions.
Must be able to communicate in English (both written and oral) as it relates to the job.
Must be adaptable to a changing work environment, competing demands and is able to deal with frequent change, delays or unexpected events.
Must be willing and able to work flexible shifts and changing work schedules on short notice.
Store Seasonal Employee - Assembly FT Hours
The primary function of the Assembler is to assemble merchandise by prioritizing merchandise for assembly and checking merchandise
awaiting parts and/or needing repairs. The Assembler is responsible for performing product pre-delivery inspections and ordering product
parts required for assembly. The Assembler is also responsible for providing excellent customer service by greeting customers and
assisting customers in locating, selecting, demonstrating, and loading of merchandise in a friendly and professional manner. The
Assembler is required to maintain a safe and secure work environment by conducting daily safety reviews, noting hazards, keeping store
areas clean and organized, and monitoring for potential theft or security risks. Lastly, the Assembler is responsible for completing all other
duties as assigned.
Ability to read, write, and perform basic arithmetic (addition, subtraction).
3 months experience assembling common household goods (e.g., barbecue grills, wheelbarrow, patio furniture) OR
3 months mechanical/trade/construction experience (e.g., laborer, oil change shop).
3 months experience operating forklift/power equipment such as lifts, order pickers, and similar equipment.
Lowe's is an equal opportunity affirmative action employer and administers all personnel practices without regard to race, color, religion, sex, age, national origin, disability, sexual orientation, gender identity or expression, marital status, veteran status, genetics or any other category protected under applicable law.
Transmission Assembly Technician
Parallel Employment in Partnership with Twin Disc are NOW HIRING
TransmissionAssemblyTechnician is responsible to perform the assembly of complex transmissions according to established specifications and instructions from start to finish from a blueprint, schematic and/or work instructions.
Essential Job Duties:
- Study, read and understand the schematic diagrams, blueprints, product manuals and process documents
- Perform complex and advanced assembly of transmissions according to established specifications and instructions
- Perform precision calibration and advanced adjustments using testing instruments with instructions
- Follow assembly procedures to promote production of quality products
- Ensure all records are maintained according to standard operating procedures
- Perform equipment assembly according to engineering drawings and instruction
- Perform cleaning of all parts as per established cleaning procedures
- Perform pre-assembly activities such as cleaning and lubricating
- Conduct product testing and performance testing and record the results
- Perform final checks and adjustments for any defect to ensure high quality products
- Perform installation, repair, inspection, rebuilding, replacing, refitting and adjusting products as required
- Understanding of equipment and preventive maintenance procedures to avoid any breakdowns and failures
- Operate powered lifting and industrial vehicles
- Train new team members
- Participate in Lean and Gemba
- Accomplish organizational goals by accepting ownership for completing new requests; exploring opportunities to add value through process improvements and efficiencies.
Strong attention detail, knowledge of lean manufacturing principles, excellent problem solving skills, communication, willingness to learn, and teamwork skills
we are an equal employer opportunity
- Experience with transmission or motors preferred.
- Must be able to read and interpret complex blueprints.
- Read and understand various gauges: Micrometer, Vernier, etc. required.
- Must be able to lift up to 35lbs
- Strong mechanical aptitude is a must.
- Knowledge of Hydraulic press desired.
- Powered Industrial vehicle experience desired.
- Desire Lean and/or Gemba Board experience.
- High school diploma or equivalent
Benefits to be discussed at time of hire
Technician - Automation Assembly
Warehouse- Assembly Line Leads
IntelliSource has 19 years of production, distribution and fulfillment center experience. We are seeking the best Assembly Line Leads in the area to do great things for our company and will use their experience to benefit our partner’s mission by making an impact on the business and being awesome. We are offering $16.50/hour at start with full benefits after 90 days and a 401K plan after 1 year. We have a variety of positions and are eager to find the one that best suites your experience. You don’t want to pass up this career opportunity, great culture and fun work environment! Come join our team!
DO YOU FIT THIS PROFILE?
You are engaged at a high level necessary for success
You thrive under pressure
You are self-driven and actively looking for ways to add value and get things done
You like to have fun at work and celebrate the wins
You want to part of a great team and value safety, teamwork, quality of service and productivity.
You have experience and a desire to work in high volume production, distribution/fulfillment centers and empower the people around you for success, we want you!
DUTIES AND RESPONSIBILITIES
General Line (Fold/Ship) Operator Duties: 80% of time
- Meet CDP Production Operator Expectations
- Support 100% On-Time Delivery to manufacturing (CD) lead-time by ensuring oldest orders are prioritized and that all operators and equipment is running efficiently without waste. Coordinate with production manager, engineers, quality, and maintenance and other team leads to support on time delivery.
- Meet CDP Production Lead Expectations
- Notify Production Manager when have too many, or too few operators
- Move operators between positions within your area to best balance product flow (no stacking)
- Fill in at fold, ship, or final inspection as needed to help resolve bottlenecks (stacking of units)
- Fix printers, bagger, etc. if possible. If unable, create Maintenance Red alert
- Create IT and Material request tickets as needed
- Track and Expedite Past Due orders
- Utilize Shop Planning Reports throughout the shift to identify and find orders that have been in barcode label or final inspection status for more than 2 hours
- Troubleshoot address errors or over shipments
- Complete final walkthrough at end of shift
- Manage Operator performance and escalate if need be
- Must be 18 years of age or older
- High School diploma or G.E.D equivalent
- Preferred general production experience
- Preferred experience in Lean Principles
- Bilingual (English/Spanish) preferred.
- Must be able to communicate effectively – verbal and written in English.
- Experience in high volume manufacturing environments a plus
- Attention to Detail
- Computer Literate
- Ability to “multi-task” while also reassessing priorities on a continual basis
- Work under compressed timelines and other resource limitations
- Willing to work in shifts and for long hours when necessity arise
- Capable of working in demanding situations when required
- Able to lead and manage peers.
- Ability to team and work well with others at all levels
- Must be approachable and responsive to a variety of people and issues
- Ability to interpret a variety of instructions furnished in written, oral, diagram and schedule form
- Must be flexible to learn other duties and positions within the CDP Division and perform these duties at the direction of the Production Manager
- Medical, dental, vision after 90 days of employment
Our business - and our approach - is personal
IntelliSource has 19 years of business process outsourcing experience – bringing innovative solutions through people, processes and technology to maximize Fortune 500 and fast-growth companies' operations and workforce management. IntelliSource has a proven track record as a trusted partner to its clients and associates - empowering businesses and people to reach their full potential.
IntelliSource is an equal opportunity employer. No employee or applicant will be discriminated against in any condition of employment because of race, color, national origin, sex, religion, age, disability, veteran status or any other status protected by law. IntelliSource is a free service to you. We are an E-Verify Employer.
Assembly - 1St Shift
1st shift position working Monday-Friday, 5:00 am -3:00 pm
- Reviews and interpret assembly instructions
- Determines if all parts are present and review materials for expiration
- Assembles the product following proper PPE and instructions
- Verifies throughout the process product is being assembled per the specifications by the use of measuring tools, calipers, or other methods to verify thickness, weight, etc.
- Completes material transaction or other documentation necessary
- Resolves assembly and production issues
- Reports errors in production line
- Maintains shop floor area clean and safe
- High School Diploma or GED
- 1+ year of assembly/manufacturing experience
- Ability to clearly and effectively communicate both verbally & written
- Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals
- Ability to understand and carry out instructions furnished in written, oral or diagram form
- Ability to lift and/or carry up to 50 lbs
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!