Instrument Mechanic Job Description Sample
Ethicon, Inc., part of the Johnson & Johnson Family of Companies is recruiting for an Instrument Mechanic located in Somerville, NJ.
The Ethicon business offers a broad range of products, platforms and technologies-including sutures, hemostasis products, surgical staplers, trocars, energy devices and synthetic mesh devices-that are used in a wide variety of open and minimally invasive surgical procedures. Specialties include support for treatment of colorectal and thoracic conditions, women's health conditions, hernias, cancer and obesity. The Ethicon business combines products and services of two market leading legacy companies, both with long histories of medical innovation. Ethicon, Inc. based in Somerville, New Jersey, was founded more than 80 years ago as a pioneer in suture development and manufacturing, helping to transform the safety and effectiveness of surgery.
Thriving with a diverse company culture, celebrating the uniqueness of our employees and committed to inclusion. We are proud to be an equal opportunity employer.
The Instrument Mechanic will be responsible for calibrating, maintaining, troubleshooting, and installing mechanical, pneumatic and electronic process instrumentation.
Work in a highly regulated environment, calibrating instrumentation systems utilized by Production and Research & Development (R&D) equipment.
Ensure adherence to established performance levels and product quality.
Complete documentation accurately to maintain traceability for all devices.
Enter all calibration/maintenance activities according to regulatory requirements to ensure Good Manufacturing Practice (GMP), International Organization for Standardization (ISO) and Quality System Regulation (QSR) compliance.
Interact with Production and R&D departments to perform calibrations by due dates.
Cross craft lines, as assigned by the Company, and will be expected to perform the work of multiple functions.
A minimum of a High School diploma, G.E.D. or equivalent is required.
Approved vocational, technical or apprenticeship training is required.
A minimum of 5 years of process and/or analytical instrumentation experience is required.
American Society for Quality (ASQ) CCT or Precision Measurement Equipment Laboratory (PMEL) certification preferred.
Knowledge of control theory and metrology basics required.
Prior experience in a GMP, GLP, ISO, QSR or other regulated industry is preferred.
Experience with calibration software (e.g. Maximo) preferred.
Basic computer skills required.
Knowledge of Microsoft Office (Word, Excel, Outlook) is preferred.
Must be a team player and have strong communication and interpersonal skills.
Must have the ability to work with minimal technical supervision.
Must have the ability to interact and communicate effectively with other functional professionals (i.e. R&D, Production, Engineering) at all levels.
This position is located in Somerville, NJ and requires a daily commute for the 1st shift working hours of 7 AM - 3:30 PM Monday - Friday with overtime, off-shift hours and weekends as needed by the business.
This position pays $32.58/hour and is under a Collective Bargaining Agreement in a union environment.
United States-New Jersey-Somerville
Ethicon Inc. (6045)
Flight Test Instrument Engineer
Flight Test Instrument Engineer
Location: Windsor Locks, CT
Pay Rate: $67/hr
Duration: 12 Month W2 Contract
MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.
Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
US Person is required
This position may include off-shift work hours and weekends as required.
- Bachelors or higher required
- 6+ years of directly related experience
Instrument And Electrical Technician
Job Description: and Qualifications
Air Products, manufacturer of industrial gases, is seeking a high energy, self-starter to fill an Instrument and Electrical Technician position. This position primarily supports our four main HyCO plants in California, along with 8 smaller facilities throughout the US and as required will support all our facilities in the US and Canada.
This is a residence-based position with the preferred area located in either southern or northern California. All tools and PPE required for this position will be provided.
You would be responsible to perform and/or supervise the inspection, repair, installation and modification of process controls, safety devices, analyzers, PLC's, field instrumentation and process monitoring equipment in Air Products operated plants, joint ventures, subsidiaries, and third party facilities. You would also be responsible for commissioning of new plants in addition to troubleshooting, repair, and calibration of plant instrumentation and controls.
Our technicians have a very challenging and rewarding position. You would be expected to respond to Operations requirements on a 24 hour per day, 7 days per week basis. Generally, technicians average 60-65 hours per week and they travel away from home about 75% of the time.
The Technicians' responsibilities include:
Technicians must be familiar with all equipment in plants served. A sampling of these devices include transmitters, switches, analyzers, programmable controllers, proximity devices, level control systems, control valves, equipment and personnel safety systems, paymeter systems, and others. Within each category are a variety of pneumatic and electronic devices.
Technicians are also responsible for troubleshooting and working with Instrument Engineering Support to maintain distributed control systems. This is a most rapidly changing technical area and requires a high level of technical training.
Prepare and provide technical reports and enter information into SAP to provide accurate documentation and information for equipment.
Qualifications / Requirements:
High school diploma/equivalent
Minimum five years of experience with calibration and troubleshooting of industrial plant instrumentation and controls
Knowledge of PLC and DCS controls is a plus
Supervisory skills/experience a plus
Basic computer skills
SAP knowledge is desired
Ability to work in an industrial environment that includes climbing ladders and stairs, lifting up to 50 lbs., working at heights and in confined spaces
Ability to travel on short notice and work extended hours, typically 12 hours per day when in the field
Ability to work in a team environment, with safety first as a primary focus
Ability to communicate effectively across technical, operations and maintenance lines
This is a ladder position and advancement is possible based on experience and demonstrated competency.
Military Veterans: Air Products is a military friendly employer that values the skills obtained through military teamwork. Our culture and company values the leadership and focus on safety that is obtained from your service. This position would be best suited for Non-commissioned Officers with specific focus in technical fields. Veterans from any branch or MOS with hands-on mechanical skill sets and, for example, experience in propulsion systems, engineering fields, nuclear power, aircraft maintenance, cryogenic technicians, and civil engineering are encouraged to apply.
We offer a comprehensive benefits package including paid holidays/vacation, affordable medical, dental, life insurance, 401K plans.
We thank all applicants in advance for their interest; however, only those applicants who are being considered for an interview, or are currently employed by Air Products, will be contacted.
To learn more, visit About Air Products.
Air Products is an Equal Opportunity Employer (U.S.) All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, age, citizenship, gender, marital status, pregnancy, sexual orientation, gender identity and expression, disability, or veteran status.
North America - Exempt
Instrument Technician I
Instrument Technician I-La Porte HyCo
Are you ready to take the lead?
The Linde Group, is one of the world leaders in gases, engineering and healthcare. We operate in more than 100 countries across the globe and generated revenue of $20.13B in 2017. But what makes us great is our people, because they make great things happen. Guided by integrity, Linde employees take pride in what they do, because they know it makes a real difference to our customers. They are empowered to turn a challenge into an opportunity to learn and grow. This is how they take the lead, every day.
At The Linde Group we identify ourselves with our products – either working for the technical or medical gases business. Being a company with a long tradition in the gases business, we not only care about our customers and high quality products, but most importantly about our employees. While working with us, expect a safe workplace, high safety standards and a true commitment from our managers to safety.
Purpose of the Position:
Maintains all Instrumentation, Electrical, and Analytical equipment to assure maximum safety, availability and reliability. Assist in the development of daily work plan and assist in development of strategic plan for I&E reliability. This function includes all aspects of Predictive, Preventive and Corrective maintenance activities to support HyCO unit targets and objectives. Strong team player and visible leader.
Make routine, periodic or special inspections to determine repair and maintenance work necessary to prevent breakdown of instrument, electrical, and analytical equipment.
Perform routine and non-routine equipment and facility maintenance as directed to ensure instruments, electrical, and analytical equipment is maintained in full working order and that the company's physical appearance is clean, safe and properly maintained at all times.
Tests, inspects, troubleshoots and repairs instruments, electrical, and analytical equipment.
Set up and safely operate all tools and test equipment necessary to perform assigned work.
Maintains equipment associated with the plant Safety Instrumented Shutdown system.
Understands when and how to utilize external resources for technical support such as vendors, support specialists and engineers, contract consultants, reference manuals and web site tools.
Documents repair work and assists in maintaining documentation.
Procures materials, equipment and parts from warehouse and outside suppliers.
Maintains a strong focus on housekeeping in I&E shop and at job sites in the field.
High School Degree
Minimum 5 Years Prior maintenance experience with Instrument, Electrical, and Analytical Equipment
Minimum 5 Years with Microsoft Windows Office Suite (i.e., Word, Excel, and Internet Explorer)
Minimum 5 Years Maintenance and troubleshooting experience with multiple types of instrumentation, electrical, and analytical equipment.
Strong mechanical aptitude
Good knowledge and use of basic hand tools
Knowledge on reading various types of micrometers
Basic math skills
Ability to read, understand, and utilize equipment drawings and P&ID's
Strong Diagnostic, Problem Solving and Decision Making skills
Strong verbal and written communication skills
Attention to detail and follow-up
Time management skills
Linde offers excellent salaries, world-class benefits, and unparalleled opportunities for development – all to create an invigorating and satisfying environment.
Join a World Leading Team Today!
Apply today @ https://uscareers-lgamericas.icims.com
Linde is an Equal Opportunity Employer (EOE). Company provides equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran or disabled status or any legally recognized status entitled to protection under applicable federal, state, or local laws
Medical Instrument Technician (Gi)
Gastroenterology (GI) is a specialty practice area in which health-care staff provide care to patients with known or suspected gastrointestinal problems who are undergoing diagnostic or therapeutic treatment or procedures.
Learn more about this agency
The Medical Instrument Technician Gastroenterology (MIT/GI) assists the practitioner in endoscopic procedures including, but not limited to; esophagogastroduodenoscopy (EGD), colonoscopy, endoscopic retrograde cholangiopancreatography (ERCP), endoscopic ultrasound (EUS), bronchoscopy, endoscopic bronchial ultrasound (EBUS), and facility specific specialty procedures. MIT/GI ensure proper performance of equipment, set up equipment, and reprocess endoscopic reusable medical equipment (RME). The MIT/GI is a part of a highly specialized team that is knowledgeable and operates complex equipment which required extensive knowledge and proficiency to maintain an optimal working environment. The individual must use independent judgment in applying knowledge of clinical gastroenterology and proficiency to operate and maintain the GI equipment. The MIT/GI must maintain BLS certification.
1.This assignment represents the full performance level MIT/GI. The MIT/GI performs as a responsible member of the GI Department team and interacts with patients, family members, professional and supportive personnel who provide patient care, and with members of other services, incorporating acceptable, established customer service standards into practice.
2.The MIT/GI is responsible for the procedure room set-up and tear-down, specimen collection and assisting the doctors and nurses during endoscopy procedures. Room set-up involves choosing appropriate scope and accessories for the upcoming case, assuring they are properly connected to processors, etc. Stocking the room so all needed supplies are at hand and the case runs smoothly. During cases the technician will be available and trained to assist with accessories and endoscopic treatment and interventions. After the case and the patient has been moved to recovery, the GI Technician will assure the appropriate initial pre-cleaning, cleaning, high level disinfection, and storage of endoscopes and accessory equipment. The MIT (GI) prepares the endoscopy suite for the next procedure, restocking as needed.
The MIT/GI collects, processes, and labels all specimens; train other technicians in basic and advanced endoscopic procedures; works in and outside the GI unit offering technician support during emergent and on-call endoscopic cases; The MIT/GI assures procedure reports are completed and documented in CPRS as soon as possible after interpretation.
Work Schedule: Monday-Friday 9 am-5:30 pm
Financial Disclosure Report: Not required
Job family (Series)
0649 Medical Instrument Technician
HelpRequirements Conditions of Employment
You must be a U.S. Citizen to apply for this job
Designated and/or random drug testing may be required
Selective Service Registration is required for males born after 12/31/1959
You may be required to serve a probationary period
Subject to a background/security investigation
Must be proficient in written and spoken English
Selected applicants will be required to complete an online onboarding process
Citizenship. Citizenship of the United States. (Non-citizens may be appointed when it is not possible to recruit qualified citizens in accordance with chapter 3, section A, paragraph 3g, this part.)
Education. There are no specific educational requirements for this occupation.
Education may be substituted for experience only at the GS-4 and GS-5 levels. See the grade requirements part of this standard for information regarding educational substitutions.
Licensure or Certification. Licensure or Certification is not required for this occupation; however, it is strongly desirable at GS-6 or above as evidence of possession of the essential knowledge, skills, and abilities. For certain functional areas at the higher levels or supervisory assignments, specific certifications appropriate to the specialty are indicated in this standard under "Titles and Certification/Registrations".
For all specialties identified in this standard, Basic and Advanced Cardiac Life Support certifications are desirable. Training which does not result in official certification does not meet this definition
Preferred Experience: Infection control, reprocessing of reusable medical equipment (endoscopic preferred)Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religions; spiritual; community; student; social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
Gastroenterology (GI) Technicians
Assist the practitioner in endoscopic procedures, such as esophagogastroduodenoscopy (EGD), colonoscopy, endoscopic retrograde cholangiopancreatography (ERCP), and endoscopic ultrasound. The technicians ensure proper performance of equipment, set up equipment, and reprocess endoscopic reusable medical equipment (RME). Certification is offered by the Society of Gastroenterology Nurses and Associates (SGNA) for level one and level two training. GI endoscope reprocessing certification is offered through the Certification Board of Sterile Processing and Distribution (CBSPD).
Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, abilities, and other characteristics related to the duties of the position to be filled.
This would be experience in operating equipment related to the particular specialization for which application is made or in related functional areas. Experience gained in the operation of equipment for animal diagnosis or treatment may be credited through this grade level. In addition, the candidate must demonstrate the following KSAs:
Education. Successful completion of 4 academic years above high school leading to a bachelor's degree with courses related to the occupation, or] a bachelor's degree in a major field of study appropriate to medical instrument technician functions.
Demonstrated Knowledge, Skills, and Abilities
1.Knowledge of standard medical terminology to interpret physician orders or instructions.
2.Knowledge of common physical disabilities and ability to position patients for the examination or treatment.
3.Ability to learn the normal and abnormal results for routine procedures to recognize and report obvious abnormalities.
4.Ability to operate the equipment to administer routine/standard diagnostic treatment or procedures.
5.Ability to perform standard operator maintenance on the equipment including the ability to disassemble, clean, reassemble, and calibrate the machine.
At least 1 year of experience comparable to the next lower grade level, which demonstrates the knowledge, skills, and abilities, and abilities related to the duties of the position to be filled. In addition, the candidate must demonstrate the following KSAs:
1.Ability to set up endoscopy equipment, ensuring endoscopes and ancillary equipment functions properly.
2.Ability to aid the physician with standard and routine procedures such as colonoscopy and esophagogastroduodenoscopy.
3.Knowledge of medical terminology and human anatomy in order to assist the practitioner with routine standardized gastroenterology procedures.
4.Ability to interact with patients explaining procedures and positioning the patient for the procedure, recognizing disabilities or impaired mobility and assisting the patient as necessary.
5.Ability to reprocess and maintain specialty critical reusable medical equipment (RME), following approved standard Operating Procedures (SOPs) and universal precautions.
6.Ability to use basic computer systems and programs to record patient and endoscopic data, adhering to patient privacy and information security policies.
7.Ability to manually clean and disinfect non-critical reusable equipment and surfaces, dispose of one-time use equipment and trash per facility policy, and restock supplies such as linens, suction equipment, and cleaning products.
GS-7 GI Technician
Experience. At least 1 year of experience comparable to the next lower grade level which demonstrates the knowledge, skills, and abilities related to the duties of the position to be filled.
This would be experience which provided knowledge of proper performance of endoscopic equipment and procedures. In addition, the candidate must demonstrate the following KSAs:
1.Knowledge of endoscopic equipment and use in basic and complex endoscopic procedures.
2.Knowledge of anatomy and physiology related to the GI system, with ability to recognize and report obvious abnormalities during procedures.
3.Ability to assist physician with specialized, complex procedures.
4.Knowledge of universal precautions and disinfection techniques and ability to follow SOP's to clean reusable medical equipment (RME).
5.Ability to collaborate, communicate, and demonstrate customer service skills and interpersonal skills with all healthcare professionals to ensure quality and continuity of care.
6.Ability to use basic computer systems and programs to record patient and endoscopic data, adhering to patient privacy and information security policies.
7.Ability to deliver patient care, including vital sign measurements and medication administration.
References: VA Handbook 5005/54 PART II Appendix G27 This can be found in the local Human Resources Office.
This position requires regular and recurring physical exertion.
It may involve walking, frequent bending, reaching, and stretching to set up and take apart equipment; lifting and positioning patients; and carrying, pushing, or pulling, moderately heavy objects. Duties may require above average dexterity.
The full performance level of this vacancy is GS-07. The actual grade at which an applicant may be selected for this vacancy is in the range of GS-05 to GS-07.
IMPORTANT: A transcript must be submitted with your application if you are basing all or part of your qualifications on education.
Note: Only education or degrees recognized by the U.S.
Department of Education from accredited colleges, universities, schools, or institutions may be used to qualify for Federal employment. You can verify your education here: http://ope.ed.gov/accreditation/. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
Instrument & Electrical Maintenance Technician
CF Industries is a global leader in transforming natural gas into nitrogen. The chemical processes we use ensure we have the nitrogen we need to support life on earth - from fertilizer that feeds the crops that feed the world to products that remove harmful emissions from industrial activities.
Through our nine world-class manufacturing complexes and best-in-class distribution system, we serve agricultural and industrial customers. We invite you to be a part of our nearly 3,000 employees making a difference every day.
Engineering and Engineering Services
R0001738 Maintenance I&E Tech position is responsible for the installation, operation and maintenance of instruments, automation systems and electrical distribution systems at the Verdigris Plant. This entails troubleshooting in the following areas to ensure safe and efficient plant operations; electronic instrumentations/DCS, electrical distribution, pneumatic/hydraulic control systems and control valves.
JOB RESPONSIBILITIES :
Always work in a safe manner. Participate in site safety meetings, close hazard ID and near miss safety programs.
Calibrate, troubleshoot and repair electronic instruments (DP cells, pressure transmitters, thermocouples, torque tubes, data loggers, electronic controllers and alarm/safety systems) in all areas of the plant. Tune control loops, repair/rebuild valves, actuators and pneumatic positioners to maximize the inherent safety, efficiency and on stream factor for the facility. Troubleshoot, install and maintain electrical systems and motors that operate at voltages up to and including 4160 VAC.
Participate in HAZOPs, management of change processes and procurement activities related to the design/maintenance of the I & E infrastructure. Assist in the installation, commission, start-up and documentation of sustaining and capital projects within all areas of the plant. Perform other duties as assigned by management.
PHYSICAL REQUIREMENTS :
Must be able to occasionally lift up to 100 lbs. Must be able to occasionally carry up to 100 lbs.
Tasks performed while lifting: Moving valves, controls, tools, test equipment, cables, bundles of wires, switchgears and motors
Adverse environmental conditions Occasional exposure and/or proximity to:
extreme temperatures (above 100- F)
other potential hazards (working with high pressure instrumentation) Frequent exposure and/or proximity to:
noise sufficient enough to require shouting to be heard
moving mechanical parts
working on scaffolding or in high places
chemicals (ammonia, chlorine, carbon dioxide, refrigerants, cleaning fluids, and solvents)
fumes, odors, mists and gases
oils (penetrating oils, lubricating oils, and refrigerant oils)
5.Emergency situation considerations: Requires the ability to wear a respirator and
utilize any emergency, or safety equipment/procedure in response to an emergency
Possession of a High School Diploma/GED or an Associate-s degree in Electronics or Instrumentation. Apprenticeship program with a minimum of two (2) years of on the job training is acceptable.
Minimum of two (2) years of experience with installing, calibrating, troubleshooting and maintaining process instrumentation for measuring and controlling flow, pressure, temperature and level.
Safety conscious, self-motivated, proficient communication skills, exceptional work ethic and strong attention to detail
Basic knowledge of mechanical, hydraulic and pneumatic systems
Exposure to HART instrumentation, digital valve positioners, Distributed Control Systems (DCS) and Burner Management Systems (BMS) desired
Must successfully complete a pre-employment physical and drug screen
Must successfully obtain a Transportation Worker Identification Credential card (TWIC)
CF Industries is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status.
Employees in the US can learn more about their rights by viewing the federal "EEO is the Law" poster (PDF) and the Pay Transparency Policy Statement can be found on this link: .
Employees in Canada can learn more about their rights by viewing the
- Canadian Human Rights Act-.
If you need any assistance seeking a job opportunity at CF Industries, or if you need reasonable accommodation with the application process, please call or contact us at .
JOIN OUR TALENT NETWORK
Posted Date: 09-20-2018
.Net, Environmental, HTML, HTTP, Management, Mechanical, Technician
Land Surveyor- Crew Chiefs & Instrument Operators
INSTRUMENT OPERATORS / RODMEN:
Seeking experienced surveyors and recent graduates with Associate Degrees in Civil Engineering. The responsibilities for these positions include field surveying activities under the direction of a Crew Chief for a wide range of commercial, retail, and public projects.
The successful candidate will have at least 2 years experience leading a survey crew. In addition, this candidate will possess strong organizational skills, professionalism, work ethic, verbal and written communication skills, listening & problem solving, and a proactive approach.
Maintenance Mechanic, Instrument - Rodeo Refinery
Phillips 66 & YOU- Together we can fuel the future
The Maintenance Mechanic (Instrument), under the general direction of the Maintenance Supervisor, performs any and all work for which qualified in a safe and efficient manner, including but not limited to repairing, altering, removing, installing, assembling, troubleshooting and servicing all types of process instrumentation and some analyzers. Instrumentation includes measurement of pressure, temperature, level, flow, etc., local recorders, controllers, indicators and final control elements such as control valve positioners, solenoid operated valves, etc. Analyzers may include wet-basis such as pH/ORP, ambient area monitors, combustion excess O2/CO, etc.. Maintains and operates all equipment and tools required to support skills and sustains a well-kept and orderly site in performance of all work. Acquires additional skills and knowledge as required to become a proficient multi-skilled employee. Assists other personnel in accomplishing their work for the safe and reliable operation of the refinery. Must work in/outdoors where exposed to weather elements; some climbing and lifting. May be required to work in confined spaces or at elevated heights. Shift work, including days, nights, weekends and holidays may be required; must be willing/able to respond to callouts during off hours due to business necessity.
Responsibilities may include:
Participating and/or planning the safety process i.e. JSA's/TSA's and performing safety observations to assure all plans are in compliance with applicable government regulations and established company policies, procedures and practices.
Working with Operations and other groups to fully understand the scope, priority and timing needed for maintenance repairs. Ensures all work is completed in a safe, environmentally-compliant, and cost effective manner
Reviewing work prior to start, assuring materials, resources, information and tools on hand to achieve high levels of craft productivity.
Executing/completing daily and preventative maintenance work orders
Initiating equipment defect elimination by identifying problem causes, taking immediate corrective action when practical, and recommending solutions to supervisors and engineers
Developing/modifying maintenance or safety procedures related to maintenance work processes; individually or as part of a team.
Reviewing technical manuals/procedures/specifications (in English) to effectively perform assigned work.
Coordinating work of others, as needed.
Working overtime, weekends, holidays and varied shifts, as assigned.
Communicating effectively with all employee levels
Sharing knowledge, skills and expertise with associates to facilitate a high performing organization.
Working with the Environmental Department to understand and comply with regulatory requirements.
Legally authorized to work in the job posting country
18 years of age or older
Maintain a valid driver's license
High School Diploma or GED equivalent
Must possess a valid Transportation Workers' Identification Credential (TWIC) or qualify for a TWIC card by start date.
Must be willing and able, with or without accommodation, to perform/comply with the following:
Work overtime (including weekends, holidays, and rotating shifts)
Respond to afterhours callouts
Lift up to 50 pounds
Work in enclosed spaces such as tanks and silos
Work safely near large, hot, high-speed machines
Climb up to 200 feet in height; work at elevated heights
Work around chemicals, including acids and bases
Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toed shoes, ear/eye protection)
Maintain face daily so that a respirator/face mask can seal properly
Ability to be on call and respond to callouts during off hours due to business necessity
Work outside in harsh weather condition
4 or more years of industrial maintenance experience in troubleshooting, servicing and repairing instrumentation systems and equipment with working knowledge of calibration principles, methods, and recordkeeping requirements.
Completion of a (1) Certificate or degree from an accredited technology school or (2) Level 4 NCCER or ISA instrumentation certification or (3) other accredited apprenticeship program that includes technical knowledge certification or (4) 5 of more years of industrial maintenance experience and has passed an accredited technical knowledge certification
Must be able to read, follow and understand schematics, drawings (including ladder logic), and other diagrams in English
Computer proficiency in Microsoft applications such as Word, Excel and Outlook
Military training and experience is recognized
Proactive and results-oriented
Able to effectively interact with all organizational levels and value diversity
Demonstrated communications and teamwork skills
At Phillips 66, while "what" we do may be very different from person to person, there's a "how" that connects all of us. It is how we work, how we collaborate and how we succeed together. It's this shared "how" that our competency framework describes in detail. We call it the Keys to Success because it can unlock the potential within us all.
Keys to Success
Contr: Adaptability—Adapt And Learn From Experience
Contr: Building Collaborative Relationships—Foster Relationships
Contr: Judgment—Demonstrate Sound Judgment
Contr: Results Orientation—Optimize Work Performance
The San Francisco Refinery is comprised of two facilities linked by a 200-mile pipeline. The Rodeo facility is located in the San Francisco Bay area, while the Santa Maria facility is located in Arroyo Grande, CA. The refinery's crude oil processing capacity is 120 MBD. The refinery processes mainly heavy, high-sulfur crude oil.
Phillips 66 is a diversified energy manufacturing and logistics company. With a portfolio of Midstream, Chemicals, Refining, and Marketing and Specialties businesses, the company processes, transports, stores and markets fuels and products globally. Phillips 66 Partners , the company's master limited partnership, is an integral asset in the portfolio. Headquartered in Houston , the company has 14,600 employees committed to safety and operating excellence. Phillips 66 had $53 billion of assets as of Sept. 30, 2017. For more information, visit www.phillips66.com or follow us on Twitter @Phillips66Co.
To be considered
In order to be considered for this position you must complete the entire application process, which includes answering all prescreening questions and providing your eSignature on or before the requisition closing date of October 7, 2018.
Candidates for regular U.S. positions must be a U.S. citizen or national, or an alien admitted as permanent resident, refugee, asylee or temporary resident under 8 U.S.C. 1160(a) or 1255(a)(1). Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire.
Phillips 66 is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities
Nuclear Instrument Technician I
Dominion Energy is one of the nation's largest producers and transporters of energy, with a portfolio of approximately 25,700 megawatts of generation, 14,400 miles of natural gas transmission, gathering and storage pipeline, and 6,500 miles of electric transmission lines. Dominion Energy operates one of the nation's largest natural gas storage systems with 1 trillion cubic feet of storage capacity and serves more than 6 million utility and retail energy customers.
Our company is built on a proud legacy of public service, innovation and community involvement. In addition to our core energy production, transportation and storage businesses, we invest in communities where we live and work and by practicing responsible environmental stewardship wherever we operate.
Diversity is linked to every aspect of our business to include how we attract, develop and retain our future talent. An inclusive environment encourages the coming together of different talents, thoughts and energies. The company's commitment to employing military veterans through the Troops to Energy Jobs program is one way we are able to ensure workforce diversity.
At this time, Dominion Energy cannot transfer nor sponsor a work visa for this position.
This position does not offer relocation assistance.
Works under direction of a Supervisor or Senior Technician and performs maintenance and calibration activities. Performs work activities in both a shop and field environment to include normal and radiological areas of the plant. Work activities are related to maintenance, calibration and testing of safety-related equipment associated with electrical, mechanical and instrumentation and control systems. Satisfactorily completes the Instrument and Control Technician Training program.
Assists with scheduled work activities such as preventative maintenance, corrective maintenance, and calibrations.
Works on both analog and digital control systems including microprocessor, electronic, and pneumatic instrumentation and controls including pressure, temperature, and flow sensors and associated alarm circuits.
Corrects anomalous operations of indicators, controllers and instrument loops using more advanced test equipment and investigative techniques.
Accurately completes documentation associated with assigned job tasks and complies with approved procedures.
Complies with and demonstrates a working knowledge of Work Management processes, Equipment Clearances (safety tagging), Radiological Work permits associated with department maintenance work assignments and Safety regulations, policies, and practices.
Assists Technicians with performing maintenance, calibrations, and testing of equipment and control loops on systems and equipment, including the reactor containment and other radiological areas, during all modes of plant operation.
Uses industry accepted human performance practices to promote error free performance and coaches others to raise standards and expectations.
Satisfactorily completes the initial training requirements and on-the-job training and evaluation requirements identified in the Nuclear Instrument Technician Training Program as accredited by the National Academy for Nuclear Training.
Required Knowledge, Skills, Abilities & Experience
Possess 2 years or more instrument & controls experience
Nuclear Navy (ET) experience
Commercial nuclear experience
Successful completion of the Instrument and Control Technician qualification test.
Demonstrated working knowledge of electronic equipment and circuitry.
Demonstrated familiarity with the general theories of instrumentation and control and their methods of application in nuclear power stations.
Demonstrated ability to troubleshoot analog and digital instrumentation and control circuits.
Demonstrated general familiarity of electrical and mechanical physical/dimensional measurements.
Demonstrated ability to interpret a range of general diagrams, prints, and written procedural instructions and to perform work using the information.
Satisfactorily completes the required initial training and on-the-job training and evaluation processes in order to proceed in line of progression as identified in the Nuclear Instrument Technician Training Program as accredited by the National Academy for Nuclear Training.
Must be physically able and willing to utilize respirators, SCBA bottles, fall protection or other equipment essential to the requirements of maintaining a Nuclear Power Plant including making containment entries.
Must be able to and willing to work at varying elevations, confined quarters and radiological areas of the plant.
Must have the physical ability to carry a minimum of 50 pounds tooling, test equipment, and plant equipment.
Required: High school diploma or GED.
Preferred: Associate degree in Instrumentation Technology or related discipline.
Degree or an equivalent combination of education and demonstrated related experience may be accepted in lieu of preferred level of education.
- Note* - Candidates are required to upload verification of their education prior to being scheduled for an interview.
Loud Noise Up to 25%
Radiation Up to 25%
Travel Up to 25%
This job requires recommended test results from the EEI Technician (TECH) aptitude test, administered on site during the pre-employment process. To view the practice test, cut and paste the following URL in your browser, https://careers.dominionenergy.com/content/Pre-Employment-Testing/
Certain positions at Dominion Energy may involve access to information and technology subject to export controls under U.S. law. Compliance with these export controls may result in Dominion Energy limiting its consideration of certain applicants.
We offer excellent plans and programs for employees. Employees are rewarded with a competitive salary and comprehensive benefits package which may include: health benefits with coverage for families and domestic partners, vacation, retirement plans, paid holidays, tuition reimbursement, and much more.
Dominion Energy is an equal opportunity employer and is committed to a diverse workforce. Qualified applicants will receive consideration for employment without regard to their protected veteran or disabled status.
You can experience the excitement of our company – it's the difference between taking a job and starting a career.
Nearest Major Market: Richmond
Job Segment: Technician, Nuclear, Gas, Gas Technician, Pipeline, Technology, Energy
Jr. Instrument & Controls Engineer
Support designing High Tech manufacturing facilities across the globe and have a hand in transforming tomorrow.
As an Instrument and Controls Engineer, you will have the chance to focus on projects in semiconductor manufacturing and other state of the art manufacturing facilities. Working with other members of our team, you'll deliver world class designs for prestigious clients around the world. During your time with us, you will also have the opportunity to work with the Advanced Facilities team, to learn to specify instruments, create and edit P&IDs, design Programmable Logic Computers, and automate a factory. Create engineering specifications, datasheets and perform calculations to ensure proper designs. Participate in Control system architecture development, Control system specification, Sequence of operation (SOO) preparation, Control panel specification and design, Instruments specification, Instruments layouts, Cable routing, and Instrument and I/O list preparation. If you're up for the challenge, we've been looking for someone just like you. Join our team and help us lay the foundation for human progress.
The minimum qualifications for this position are:
Engineering degree in the field of electrical, mechanical or chemical engineering
0-2 years of related experience
Ability to interact with other engineering disciplines, clients, and vendors
Moderate skills in CAD software (AutoCAD) and MS Office suite
The ideal candidate will possess the following skills and experience:
- Experience in BMS and HVAC control system design
- EIT certification
Making better hires starts with building better job descriptions
- Browse 100s of templates across 40+ industries
- Customize your template with your company info & job requirements
- Post it to 20+ job boards in seconds – for FREE!